
COUNCIL REGULATION (EU) 2020/2231 of 18 December 2020 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products 

THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,
Having regard to the proposal from the European Commission,
Whereas:

(1) In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are not produced in the Union and thereby avoid any disturbances in the market for those products, Common Customs Tariff duties of the type referred to in Article 56(2)(c) of Regulation (EU) No 952/2013 of the European Parliament and of the Council (‘CCT duties’) on those products have been suspended by Council Regulation (EU) No 1387/2013. Those products can be imported into the Union at reduced or zero duty rates.

(2) The Union production of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013 is inadequate or non-existent. It is therefore in the interest of the Union to grant a complete suspension of the CCT duties on those products.

(3) With a view to promoting integrated battery production in the Union in accordance with the communication from the Commission of 17 May 2018 entitled ‘Europe on the Move – Sustainable Mobility for Europe: safe, connected, and clean’, a partial suspension of the CCT duties should be granted in respect of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013. In addition, only a partial suspension of the CCT duties should be granted in respect of certain products that are currently subject to complete suspensions. The date for the mandatory review of those suspensions should be 31 December 2021, in order for that review to take into account the evolution of the battery sector in the Union.

(4) It is necessary to amend the product description, classification and end-use requirement for certain CCT duty suspensions listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments and economic trends in the market.

(5) A review has been undertaken of certain CCT duty suspensions listed in the Annex to Regulation (EU) No 1387/2013. New dates should therefore be set for their next mandatory review.

(6) It is no longer in the interest of the Union to maintain the suspension of CCT duties for certain products listed in the Annex to Regulation (EU) No 1387/2013. The suspensions for those products should therefore be deleted. Moreover, according to the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, for practical reasons requests for tariff suspensions or quotas where the amount of uncollected customs duty is estimated to be less than EUR 15 000 per year cannot be taken into consideration. The suspensions for products which do not reach that threshold, as indicated by the mandatory review, should therefore be deleted from the Annex to Regulation (EU) No 1387/2013.

(7) Regulation (EU) No 1387/2013 should therefore be amended accordingly.

(8) In order to avoid any interruption in the application of the autonomous tariff suspension scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff suspensions for the products concerned should apply from 1 January 2021. This Regulation should therefore enter into force as a matter of urgency,
HAS ADOPTED THIS REGULATION:

Article 1 
The Annex to Regulation (EU) No 1387/2013 is amended in accordance with the Annex to this Regulation.
Article 2 
This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.
It shall apply from 1 January 2021.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 18 December 2020.
For the Council
The President
M. ROTH
ANNEX

The Annex to Regulation (EU) No 1387/2013 is amended as follows:

((1)) the entries with the following serial numbers are deleted:
0.3338, 0.3662, 0.4675, 0.4795, 0.4856, 0.4891, 0.4902, 0.4903, 0.4905, 0.4908, 0.4911, 0.4920, 0.4926, 0.4935, 0.4939, 0.4943, 0.4973, 0.4995, 0.5012, 0.5022, 0.5039, 0.5043, 0.5052, 0.5053, 0.5067, 0.5092, 0.5103, 0.5123, 0.5125, 0.5126, 0.5311, 0.5498, 0.5953, 0.6036, 0.6068, 0.6087, 0.6450, 0.6527, 0.6591, 0.6592, 0.6595, 0.6596, 0.6597, 0.6606, 0.6607, 0.6608, 0.6610, 0.6615, 0.6616, 0.6619, 0.6626, 0.6636, 0.6639, 0.6651, 0.6653, 0.6665, 0.6676, 0.6694, 0.6697, 0.6704, 0.6705, 0.6715, 0.6724, 0.6727, 0.6731, 0.6733, 0.6735, 0.6743, 0.6744, 0.6755, 0.6756, 0.6758, 0.6760, 0.6768, 0.6775, 0.6776, 0.6778, 0.6780, 0.6785, 0.6786, 0.6787, 0.6788, 0.6795, 0.6798, 0.6803, 0.6807, 0.6811, 0.6832, 0.6833, 0.6834, 0.6838, 0.6841, 0.6883, 0.6890, 0.6895, 0.6900, 0.6902, 0.6909, 0.6914, 0.6916, 0.6918, 0.6928, 0.6941, 0.6942, 0.6943, 0.6944, 0.6953, 0.6954, 0.7040, 0.7222, 0.7293, 0.7558, 0.7560, 0.7697, 0.7715 and 0.7855;
((2)) the following entries replace those entries that have the same serial numbers:

Serial Number CN code TARIC Description Rate of autonomous duty Supplementary Unit Date foreseen for mandatory review
‘0.6748 ex 0709 59 10 10 Fresh or chilled chanterelles for treatment other than simple repacking for retail sale 0 % - 31.12.2025
0.2864 ex 1511 90 19ex 1511 90 91ex 1513 11 10ex 1513 19 30ex 1513 21 10ex 1513 29 30 202020202020 Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:
— industrial monocarboxylic fatty acids of subheading 3823 19 10,
— methyl esters of fatty acids of heading 2915 or 2916,
— fatty alcohols of subheadings 2905 17, 2905 19 and 3823 70 used for the manufacture of cosmetics, washing products or pharmaceutical products,
— fatty alcohols of subheading 2905 16, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,
— stearic acid of subheading 3823 11 00,
— goods of heading 3401, or
— fatty acids with high purity of heading 2915 0 % - 31.12.2021
0.6789 ex 1512 19 10 10 Refined safflower oil (CAS RN 8001-23-8) for use in the manufacture of
— conjugated linoleic acid of heading 3823 or
— ethyl- or methyl esters of linoleic acid of heading 2916 0 % - 31.12.2022
0.5004 ex 2008 99 48 94 Mango puree:
— not from concentrate,
— of the genus Mangifera,
— of a Brix value of 14 or more, but not more than 20,used in the manufacture of products of drink industry 6 % - 31.12.2022
0.4709 ex 2008 99 49ex 2008 99 99 3040 Seedless boysenberry puree not containing added spirit, whether or not containing added sugar 0 % - 31.12.2025
0.6723 ex 2008 99 91 20 Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking 0 % - 31.12.2025
0.4992 ex 2009 41 92ex 2009 41 99 2070 Pineapple juice:
— not from concentrate,
— of the genus Ananas,
— of a Brix value of 11 or more but not more than 16,used in the manufacture of products of drink industry 8 % - 31.12.2025
0.7393 ex 2712 90 99 10 Blend of 1-alkenes containing by weight 90 % or more 1-alkenes of a chain length of 24 carbon atoms or more but not more than 1 % 1-alkenes of a chain length of more than 70 carbon atoms 0 % - 31.12.2022
0.6658 ex 2805 12 00 10 Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2) 0 % - 31.12.2025
0.4979 2805 30 202805 30 302805 30 40  Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more 0 % - 31.12.2025
0.6836 ex 2811 22 00 15 Amorphous silicon dioxide (CAS RN 60676-86-0)
— in the form of powder
— of a purity by weight of 99,0 % or more
— with a median grain size of 0,7 μm or more, but not more than 2,1 μm
— where 70 % of the particles have a diameter of not more than 3 μm 0 % - 31.12.2022
0.5110 ex 2818 10 91 20 Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:
— 94 % or more, but less than 98,5 % of aluminium oxide,
— 2 % (± 1,5 %) of magnesium oxide,
— 1 % (± 0,6 %) of yttrium oxide,and
— either 2 % (± 1,2 %) of lanthanum oxide, or
— 2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,with less than 50 % of the total weight having a particle size of more than 10 mm 0 % - 31.12.2025
0.6837 ex 2818 30 00 20 Aluminium hydroxide (CAS RN 21645-51-2)
— in the form of powder,
— with a purity by weight of 99,5 % or more,
— with a decomposition point of 263°C or more,
— with a particle size of 4 μm (± 1 μm),
— with a Total-Na2O-content by weight of not more than 0,06 % 0 % - 31.12.2025
0.7897 ex 2825 20 00 10 Lithium hydroxide monohydrate (CAS RN 1310-66-3) 2.6 % - 31.12.2021
0.6819 ex 2825 50 00 30 Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm 0 % - 31.12.2025
0.5055 ex 2826 19 90 10 Tungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more 0 % - 31.12.2025
0.5090 ex 2833 29 80 30 Zirconium sulphate (CAS RN 14644-61-2) 0 % - 31.12.2021
0.6632 ex 2840 20 90 10 Zinc borate (CAS RN 12767-90-7) 0 % - 31.12.2025
0.7288 ex 2841 50 00 11 Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more 2 % - 31.12.2021
0.4222 ex 2841 90 85 10 Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 % 2.7 % - 31.12.2021
0.3419 ex 2850 00 20 80 Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more 0 % - 31.12.2024
0.6633 2903 39 21  Difluoromethane (CAS RN 75-10-5) 0 % - 31.12.2025
0.2583 ex 2903 89 80 45 1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9) with a purity by weight of 99 % or more 2 % - 31.12.2021
0.6611 ex 2903 99 80 15 4-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4) 0 % - 31.12.2025
0.3409 ex 2904 20 00 10 Nitromethane (CAS RN 75-52-5) 0 % - 31.12.2025
0.3391 ex 2904 20 00 20 Nitroethane (CAS RN 79-24-3) 0 % - 31.12.2022
0.3408 ex 2904 20 00 30 1-Nitropropane (CAS RN 108-03-2) 0 % - 31.12.2025
0.6612 ex 2904 99 00 25 Difluoromethanesulphonyl chloride (CAS RN 1512-30-7) 0 % - 31.12.2025
0.6613 ex 2904 99 00 35 1-Fluoro-4-nitrobenzene (CAS RN 350-46-9) 0 % - 31.12.2025
0.4934 ex 2905 39 95 10 Propane-1,3-diol (CAS RN 504-63-2) 0 % - 31.12.2025
0.6757 ex 2906 29 00 40 2-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0) 0 % - 31.12.2022
0.6782 ex 2908 19 00 40 3,4,5-Trifluorophenol (CAS RN 99627-05-1) 0 % - 31.12.2025
0.6915 ex 2908 19 00 50 4-Fluorophenol (CAS RN 371-41-5) 0 % - 31.12.2025
0.6649 ex 2909 30 38 30 1,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7) 0 % - 31.12.2025
0.5117 ex 2909 30 90 30 3,4,5-Trimethoxytoluene (CAS RN 6443-69-2) 0 % - 31.12.2025
0.6614 ex 2909 30 90 40 1-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7) 0 % - 31.12.2025
0.6783 ex 2909 30 90 50 1-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6) 0 % - 31.12.2025
0.6784 ex 2909 30 90 60 1-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2) 0 % - 31.12.2025
0.6927 ex 2909 49 80 10 1-Propoxypropan-2-ol (CAS RN 1569-01-3) 0 % - 31.12.2021
0.6660 ex 2910 90 00 50 2,3-Epoxypropyl phenyl ether (CAS RN 122-60-1) 0 % - 31.12.2025
0.5135 ex 2912 49 00 30 Salicylaldehyde (CAS RN 90-02-8) 0 % - 31.12.2025
0.6678 ex 2912 49 00 40 3-Hydroxy-p-anisaldehyde (CAS RN 621-59-0) 0 % - 31.12.2025
0.4933 ex 2914 29 00 30 (R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1) 0 % - 31.12.2025
0.4932 ex 2914 50 00 20 3'-Hydroxyacetophenone (CAS RN 121-71-1) 0 % - 31.12.2025
0.6762 ex 2914 50 00 75 7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7) 0 % - 31.12.2022
0.4948 ex 2914 79 00 60 4'-tert-Butyl-2',6'-dimethyl-3',5'-dinitroacetophenone (CAS RN 81-14-1) 0 % - 31.12.2021
0.5119 ex 2915 39 00 60 Dodec-8-enyl acetate (CAS RN 28079-04-1) 0 % - 31.12.2025
0.5121 ex 2915 39 00 65 Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4) 0 % - 31.12.2025
0.5120 ex 2915 39 00 70 Dodec-9-enyl acetate (CAS RN 16974-11-1) 0 % - 31.12.2025
0.7541 ex 2915 90 30 10 Methyl laurate (CAS RN 111-82-0) 0 % - 31.12.2025
0.4954 ex 2915 90 70 60 Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0) 0 % - 31.12.2025
0.3466 ex 2916 13 00 30 Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities 0 % - 31.12.2025
0.4931 ex 2916 20 00 60 3-Cyclohexylpropionic acid (CAS RN 701-97-3) 0 % - 31.12.2025
0.4930 ex 2916 39 90 30 2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1) 0 % - 31.12.2025
0.6794 ex 2916 39 90 41 4-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8) 0 % - 31.12.2025
0.6661 ex 2916 39 90 53 5-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0) 0 % - 31.12.2025
0.4918 ex 2917 19 80 50 Tetradecanedioic acid (CAS RN 821-38-5) 0 % - 31.12.2025
0.4945 ex 2917 39 95 20 Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0) 0 % - 31.12.2025
0.6796 ex 2917 39 95 25 Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5) 0 % - 31.12.2025
0.3640 ex 2917 39 95 30 Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7) 0 % - 31.12.2025
0.6800 ex 2917 39 95 35 1-Methyl-2-nitroterephthalate (CAS RN 35092-89-8) 0 % - 31.12.2025
0.6814 ex 2918 99 90 13 3-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0) 0 % - 31.12.2025
0.6901 ex 2918 99 90 18 Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9) 0 % - 31.12.2025
0.6747 ex 2918 99 90 85 Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more 0 % - 31.12.2025
0.5038 ex 2920 29 00 20 Tris(methylphenyl)phosphite (CAS RN 25586-42-9) 0 % - 31.12.2025
0.5045 ex 2920 29 00 40 Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8) 0 % - 31.12.2025
0.7559 ex 2920 90 10 15 Ethyl methyl carbonate (CAS RN 623-53-0) 3.2 % - 31.12.2021
0.6598 ex 2920 90 70 80 Bis(pinacolato)diboron (CAS RN 73183-34-3) 0 % - 31.12.2025
0.4917 ex 2921 29 00 40 Decamethylenediamine (CAS RN 646-25-3) 0 % - 31.12.2025
0.4862 ex 2921 30 99 30 1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6) 0 % - 31.12.2021
0.5124 ex 2921 43 00 60 3-Aminobenzotrifluoride (CAS RN 98-16-8) 0 % - 31.12.2025
0.6825 ex 2921 49 00 60 2,6-Diisopropylaniline (CAS RN 24544-04-5) 0 % - 31.12.2025
0.6947 ex 2922 19 00 35 2-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7) 0 % - 31.12.2025
0.6624 ex 2922 29 00 30 1,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4) 0 % - 31.12.2025
0.6634 ex 2922 29 00 63 Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.4956 ex 2922 29 00 75 4-(2-Aminoethyl)phenol (CAS RN 51-67-2) 0 % - 31.12.2025
0.4914 ex 2922 39 00 20 2-Amino-5-chlorobenzophenone (CAS RN 719-59-5) 0 % - 31.12.2025
0.6761 ex 2922 39 00 35 5-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5) 0 % - 31.12.2025
0.7853 ex 2922 49 85 13 Benzyl glycinate—4-methylbenzene-1-sulfonic acid (1/1) (CAS RN 1738-76-7) with a purity by weight of 93 % or more 0 % - 31.12.2024
0.5037 ex 2922 49 85 17 Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8) 0 % - 31.12.2025
0.6948 ex 2922 49 85 30 Aqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8) 0 % - 31.12.2021
0.6650 ex 2922 49 85 65 Diethyl aminomalonate hydrochloride (CAS RN 13433-00-6) 0 % - 31.12.2025
0.5063 ex 2923 90 00 75 Tetraethylammonium hydroxide, in the form of an aqueous solution containing:
— 35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,
— not more than 1 000 mg/kg of chloride,
— not more than 2 mg/kg of iron, and
— not more than 10 mg/kg of potassium 0 % - 31.12.2025
0.3689 ex 2924 19 00 23 Acrylamide (CAS RN 79-06-1) with a purity by weight of 97 % or more 2 % - 31.12.2021
0.5066 ex 2924 29 70 40 N,N'-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5) 0 % - 31.12.2025
0.5127 ex 2924 29 70 45 Propoxur (ISO) (CAS RN 114-26-1) 0 % - 31.12.2025
0.5069 ex 2924 29 70 55 N,N'-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5) 0 % - 31.12.2025
0.6767 ex 2924 29 70 62 2-Chlorobenzamide (CAS RN 609-66-5) 0 % - 31.12.2025
0.6766 ex 2924 29 70 64 N-(3',4'-dichloro-5-fluoro[1,1'-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8) 0 % - 31.12.2025
0.6934 ex 2926 90 70 17 Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more 0 % - 31.12.2025
0.6259 ex 2926 90 70 26 Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products 0 % - 31.12.2024
0.6871 ex 2928 00 90 23 Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.4929 ex 2928 00 90 25 Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution 0 % - 31.12.2025
0.6635 ex 2928 00 90 50 Aqueous solution of 2,2'-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 % 0 % - 31.12.2025
0.5035 ex 2930 90 98 10 2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6) 0 % - 31.12.2022
0.6769 ex 2930 90 98 22 Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more 0 % - 31.12.2025
0.6873 ex 2930 90 98 26 Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more 0 % - 31.12.2025
0.6617 ex 2930 90 98 53 Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9) 0 % - 31.12.2025
0.5114 ex 2930 90 98 55 Thiourea (CAS RN 62-56-6) 0 % - 31.12.2025
0.6917 ex 2931 90 00 63 Chloroethenyldimethylsilane (CAS RN 1719-58-0) 0 % - 31.12.2021
0.6946 ex 2931 90 00 65 Bis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6) 0 % - 31.12.2021
0.6620 ex 2932 20 90 65 Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0) 0 % - 31.12.2025
0.7639 ex 2932 99 00 27 (2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4) with a purity by weight of 99 % or more 0 % - 31.12.2023
0.4907 ex 2932 99 00 50 7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6) 0 % - 31.12.2021
0.6771 ex 2932 99 00 65 4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5) 0 % - 31.12.2025
0.7811 ex 2933 19 90 33 Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine 0 % - 31.12.2024
0.6835 ex 2933 21 00 55 1-Aminohydantoin hydrochloride (CAS RN 2827-56-7) 0 % - 31.12.2025
0.5115 ex 2933 21 00 80 5,5-Dimethylhydantoin (CAS RN 77-71-4) 0 % - 31.12.2025
0.6812 ex 2933 39 99 14 N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5) 0 % - 31.12.2022
0.4842 ex 2933 39 99 20 Copper pyrithione powder (CAS RN 14915-37-8) 0 % - 31.12.2021
0.6813 ex 2933 39 99 26 2-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6) 0 % - 31.12.2022
0.5129 ex 2933 39 99 85 2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3) 0 % - 31.12.2025
0.6773 ex 2933 49 10 50 1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0) 0 % - 31.12.2025
0.4927 ex 2933 49 90 30 Quinoline (CAS RN 91-22-5) 0 % - 31.12.2025
0.6763 ex 2933 59 95 21 N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2) 0 % - 31.12.2025
0.6677 ex 2933 59 95 47 6-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more 0 % - 31.12.2025
0.6774 ex 2933 69 80 13 Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more 0 % - 31.12.2025
0.6621 ex 2933 69 80 15 2-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6) 0 % - 31.12.2025
0.6951 ex 2933 69 80 17 Benzoguanamine (CAS RN 91-76-9) 0 % - 31.12.2021
0.5131 ex 2933 69 80 55 Terbutryn (ISO) (CAS RN 886-50-0) 0 % - 31.12.2025
0.4957 ex 2933 69 80 60 Cyanuric acid (CAS RN 108-80-5) 0 % - 31.12.2025
0.4985 ex 2933 79 00 70 (S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2) 0 % - 31.12.2025
0.6872 ex 2933 99 80 16 Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more 0 % - 31.12.2025
0.6829 ex 2933 99 80 21 1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1) 0 % - 31.12.2025
0.6599 ex 2933 99 80 54 3-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6) 0 % - 31.12.2025
0.6933 ex 2933 99 80 87 Carfentrazone-ethyl (ISOM) (CAS RN 128639-02-1) with a purity by weight of 90 % or more 0 % - 31.12.2025
0.4955 ex 2934 20 80 60 Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3) 0 % - 31.12.2022
0.4910 ex 2934 20 80 70 N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8) 0 % - 31.12.2025
0.4942 ex 2934 99 90 25 2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8) 0 % - 31.12.2025
0.6824 ex 2934 99 90 39 4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4) 0 % - 31.12.2025
0.6823 ex 2934 99 90 41 11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8) 0 % - 31.12.2025
0.6893 ex 2934 99 90 44 Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more 0 % - 31.12.2025
0.5133 ex 2934 99 90 86 Dithianon (ISO) (CAS RN 3347-22-6) 0 % - 31.12.2025
0.5136 ex 2934 99 90 87 2,2'-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4) 0 % - 31.12.2025
0.5036 ex 2935 90 90 42 Penoxsulam (ISO) (CAS RN 219714-96-2) 0 % - 31.12.2025
0.6777 ex 2935 90 90 54 Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.6802 ex 2935 90 90 56 N-(p-Toluenesulphonyl)-N'-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1) 0 % - 31.12.2025
0.6903 ex 2935 90 90 57 N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4) 0 % - 31.12.2025
0.6664 ex 2935 90 90 59 Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more 0 % - 31.12.2025
0.4944 ex 2938 90 30 10 Ammonium glycyrrhizate (CAS RN 53956-04-0) 0 % - 31.12.2025
0.6600 ex 3201 90 90ex 3202 90 00 4010 Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3) 0 % - 31.12.2021
0.5091 ex 3204 11 00 20 Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight 0 % - 31.12.2021
0.5134 ex 3204 11 00 45 Preparation of dispersion dyes, containing:
— C.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7),
— C.I. Disperse Blue 291:1 (CAS RN 872142-01-3),
— C.I. Disperse Violet 93:1 (CAS RN 122463-28-9),whether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0) 0 % - 31.12.2025
0.6652 ex 3204 12 00 70 Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight 0 % - 31.12.2025
0.6603 ex 3204 17 00 33 Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight 0 % - 31.12.2025
0.5100 ex 3204 19 00 73 Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight 0 % - 31.12.2021
0.6726 ex 3208 90 19 55 Preparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent 0 % - 31.12.2021
0.5031 ex 3215 90 70 40 Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with:
— wax
— a vinyl-based polymer and
— a colouring agentfor use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices 0 % - 31.12.2025
0.4863 ex 3402 11 90 10 Sodium lauroyl methyl isethionate 0 % - 31.12.2021
0.6725 ex 3506 91 90 50 Preparation containing by weight:
— 15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers, and
— 10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers,dissolved in:
— Methyl ethyl ketone (CAS RN 78-93-3),
— Heptane (CAS RN 142-82-5), and
— Toluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8) 0 % - 31.12.2021
0.6759 ex 3802 10 00 10 Mixture of activated carbon and polyethylene, in form of powder 0 % - 31.12.2025
0.6874 ex 3808 92 30 10 Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more 0 % - 31.12.2025
0.5048 ex 3808 93 90 20 Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight:
— 1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amineof a kind used in plant growth regulators 0 % - 31.12.2025
0.5030 ex 3808 93 90 30 Aqueous solution containing by weight:
— 1,8 % of sodium para-nitrophenolate,
— 1,2 % of sodium ortho-nitrophenolate,
— 0,6 % of sodium 5-nitroguaiacolate,for use in the manufacture of a plant growth regulator 0 % - 31.12.2022
0.5088 ex 3808 93 90 50 Preparation in the form of powder, containing by weight:
— 55 % or more of Gibberellin A4,
— 1 % or more but not more than 35 % of Gibberellin A7,
— 90 % or more of Gibberellin A4 and Gibberellin A7 combined,
— not more than 10 % of a combination of water and other naturally occurring Gibberellins,of a kind used in plant growth regulators 0 % - 31.12.2021
0.6532 ex 3808 94 20 30 Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:
— 1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),
— 1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),
— 1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and/or
— 1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7) 0 % - 31.12.2024
0.6904 ex 3811 21 00 12 Dispersing agent containing :
— esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),
— 35 % or more but not more than 55 % by weight of mineral oils, and
— with a chlorine content of not more than 0,05 % by weight,used in the manufacture of blends of additives for lubricating oils 0 % - 31.12.2025
0.6906 ex 3811 21 00 14 Dispersing agent :
— containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),
— containing 35 % or more but not more than 55 % by weight of mineral oils,
— with a chlorine content by weight of not more than 0,05 %,
— having a total base number of less than 15,used in the manufacture of blends of additives for lubricating oils 0 % - 31.12.2025
0.6907 ex 3811 21 00 16 Detergent containing :
— Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol)
— 40 % or more but not more than 60 % by weight of mineral oils and
— having a total base number more than 120used in the manufacture of blends of additives for lubricating oils 0 % - 31.12.2025
0.6905 ex 3811 21 00 18 Detergent containing :
— long chain alkyltoluene calcium sulphonates,
— more than 30 % but not more than 50 % by weight of mineral oils, and
— having a total base number of more than 310 but not more than 340,used in the manufacture of blends of additives for lubricating oils 0 % - 31.12.2025
0.6671 ex 3811 21 00 75 Additives containing:
— Calcium (C10-C14) dialkylbenzenesulfonates,
— more than 40 %, but not more than 60 % by weight of mineral oils,with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils 0 % - 31.12.2022
0.6669 ex 3811 21 00 77 Antifoam additives consisting of:
— a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and
— more than 50 % but not more than 80 % by weight of mineral oils,for use in the manufacture of additive blends for lubricating oils 0 % - 31.12.2022
0.6666 ex 3811 21 00 80 Additives containing :
— polyisobutylene aromatic polyamine succinimide,
— more than 40 % but not more than 60 % by weight of mineral oils,with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils 0 % - 31.12.2022
0.6668 ex 3811 29 00 65 Additives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8 % or more but not more than 12 % by weight, for use in the manufacture of blends of additives for lubricating oils 0 % - 31.12.2022
0.5062 ex 3815 90 90 30 Catalyst, consisting of a suspension in mineral oil of:
— tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, and
— silicon dioxide,
— containing 6,6 % (± 0,6 %) by weight of magnesium, and
— containing 2,3 % (± 0,2 %) by weight of titanium 0 % - 31.12.2025
0.2783 ex 3815 90 90 80 Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol 0 % - 31.12.2025
0.6810 ex 3824 99 92 23 Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol 0 % - 31.12.2025
0.4909 ex 3824 99 92 29 Preparation containing by weight:
— 85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and
— 1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate 0 % - 31.12.2025
0.6779 ex 3824 99 92 40 Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent 0 % - 31.12.2025
0.7742 ex 3824 99 92 52 Electrolyte containing:
— 5 % or more but not more than 20 % lithium hexafluorophosphate (CAS RN 21324-40-3) or lithium tetrafluoroborate (CAS RN 14283-07-9),
— 60 % or more but not more than 90 % of a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and/or ethyl methyl carbonate (CAS RN 623-53-0),
— 0,5 % or more but not more than 20 % 1,3,2-dioxathiolane 2,2-dioxide (CAS RN 1072-53-3),for use in the manufacture of motor vehicle batteries 3.2 % - 31.12.2021
0.5050 ex 3824 99 92 61 3',4',5'-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3',4',5'-trifluorobiphenyl-2-amine 0 % - 31.12.2025
0.6720 ex 3824 99 92 68 Preparation containing by weight:
— 20 % (±1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9)Dissolved in:
— 10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5)
— 64 %( ±7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and
— 6 % (± 1,0 %) Naphthalene (CAS RN 91-20-3) 0 % - 31.12.2025
0.6719 ex 3824 99 92 69 Preparation containing by weight:
— 80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)
— 7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) and
— not more than 1 % triphenyl phosphate (CAS RN 115-86-6) 0 % - 31.12.2021
0.3069 ex 3824 99 92 88 2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1) 0 % - 31.12.2025
0.4719 ex 3824 99 93 35 Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8) 0 % - 31.12.2024
0.7313 ex 3824 99 96 45 Lithium nickel cobalt aluminium oxide powder (CAS RN 177997-13-6) with:
— a particle size of less than 10 μm,
— a purity by weight of more than 98 % 3.2 % - 31.12.2021
0.6628 ex 3824 99 96 46 Manganese zinc ferrite granulate, containing by weight:
— 52 % or more but not more than 76 % of iron(III)oxide,
— 13 % or more but not more than 42 % of manganese oxide, and
— 2 % or more but not more than 22 % of zinc oxide 0 % - 31.12.2025
0.6749 ex 3824 99 96 48 Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 % 0 % - 31.12.2025
0.6897 ex 3901 40 00 30 Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with:
— more than 10 % but not more than 20 % by weight of copolymer,
— a melt flow rate (MFR 190 °C/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, and
— a density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3,for use in the co-extrusion processing of films for flexible food packaging 0 % m3 31.12.2025
0.6920 ex 3901 90 80 53 Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with:
— an acrylic acid content of 18,5 % or more, but not more than 49,5 % by weight (ASTM D4094), and
— a melt flow rate of 10g/10 min or more (125 °C/2,16 kg, ASTM D1238) 0 % m3 31.12.2025
0.6734 ex 3901 90 80 55 Zinc or sodium salt of an ethylene and acrylic acid copolymer, with:
— an acrylic acid content of 6 % or more but not more than 50 % by weight, and
— a melt flow rate of 1g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238) 0 % - 31.12.2025
0.5049 ex 3901 90 80 67 Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more 0 % - 31.12.2025
0.6736 ex 3903 90 90 65 Copolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8) 0 % - 31.12.2025
0.6804 ex 3903 90 90 70 Copolymer in the form of granules containing by weight:
— 75 % (± 7 %) styrene and
— 25 % (± 7 %) methylmethacrylate 0 % m3 31.12.2025
0.4981 ex 3904 69 80 81 Poly(vinylidene fluoride) (CAS RN 24937-79-9) 0 % - 31.12.2025
0.6672 ex 3906 90 90 33 Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm 0 % - 31.12.2025
0.6663 ex 3906 90 90 37 Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm 0 % - 31.12.2025
0.6891 ex 3907 10 00 20 Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine 0 % - 31.12.2022
0.6839 ex 3907 30 00 15 Epoxide resin, halogen-free,
— containing by weight more than 2 % phosphorous calculated on the solid content, chemically bound in the epoxide resin,
— not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, and
— containing solvents,for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits 0 % - 31.12.2025
0.6840 ex 3907 30 00 25 Epoxide resin
— containing by weight 21 % or more of brome,
— not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and
— containing solvents 0 % - 31.12.2025
0.4940 ex 3907 99 80ex 3913 90 00 3020 Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate) 0 % - 31.12.2025
0.5057 ex 3907 99 80 80 Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles 0 % - 31.12.2025
0.5032 ex 3909 40 00 20 Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices 0 % - 31.12.2025
0.6921 ex 3910 00 00 15 Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated 0 % - 31.12.2021
0.7217 ex 3910 00 00 45 Dimethyl siloxane, hydroxy-terminated polymer with a viscosity of 38-100 mPa·s (CAS RN 70131-67-8) 0 % - 31.12.2021
0.5109 ex 3911 90 99 35 Alternated copolymer of ethylene and maleic anhydride (EMA) 0 % - 31.12.2025
0.4953 ex 3912 11 00 40 Cellulose diacetate powder 0 % - 31.12.2025
0.6718 ex 3912 39 85 50 Polyquaternium 10 (CAS RN 68610-92-4) 0 % - 31.12.2025
0.4757 ex 3919 10 80 37 Polytetrafluoroethylene film:
— with a thickness of 100 μm or more,
— an elongation at break of not more than 100 %,
— coated on one side with a pressure sensitive silicon adhesive 0 % - 31.12.2025
0.4761 ex 3919 10 80ex 3919 90 80 4326 Ethylene vinyl acetate film:
— of a thickness of 100 μm or more,
— coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polypropylene liner 0 % - 31.12.2022
0.6886 ex 3919 10 80 63 Reflecting film consisting of
— a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,
— a layer of an acrylic resin having embedded glass beads,
— a layer of an acrylic resin hardened by a melamine cross-linking agent,
— a metal layer,
— an acrylic adhesive, and
— a release film 0 % - 31.12.2025
0.4947 ex 3919 90 80 65 Self-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner 0 % - 31.12.2025
0.4925 ex 3919 90 80 70 Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad 0 % - 31.12.2025
0.4964 ex 3919 90 80 82 Reflecting film consisting of:
— a polyurethane layer,
— a glass microspheres layer,
— a metallised aluminium layer, and
— an adhesive, covered on one or both sides with a release liner,
— whether or not a poly(vinyl chloride) layer,
— a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use 0 % - 31.12.2025
0.6640 ex 3920 10 40 40 Tubular layered film predominately of polyethylene:
— consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene,
— having a total thickness of 55 μm or more,
— having a diameter of 500 mm or more but not more than 600 mm 0 % - 31.12.2025
0.3357 ex 3920 62 19 48 Sheets or rolls of poly(ethylene terephthalate):
— coated on both sides with a layer of epoxy acrylic resin,
— of a total thickness of 37 μm (± 3 μm) 0 % - 31.12.2025
0.2589 ex 3920 62 19 52 Film of polyethylene terephthalate, polyethylene naphthalate or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D257 method) 0 % - 31.12.2023
0.6911 ex 3921 19 00 40 Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:
— a width of 98 mm or more but not more than170 mm,
— a thickness of 15 μm or more but not more than 36 μm,of a kind used for the manufacture of alkaline battery separators 3.2 % - 31.12.2021
0.7263 ex 3921 19 00 45 Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:
— zero transversal production direction (TD) shrinkage,
— a total thickness of 8 μm or more, but not more than 50 μm,
— a width of 15 mm or more, but not more than 900 mm,
— a length of more than 200 m, but not more than 8 000 m,
— an average pore size between 0,02 μm and 0,1 μm,
— laminated or not with a Polypropylene non-woven mat of 50 to 200 μm thickness,
— coated or not with surfactant,
— coated or not on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,
— coated or not on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm 3.2 % - 31.12.2021
0.6742 ex 3921 90 55 40 Three layered fabric sheet, in rolls,
— comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta,
— coated on both sides with polyamide,
— of a total thickness not more than 135 μm,
— of a total weight not more than 80 g/m2 0 % m2 31.12.2025
0.7335 ex 3926 30 00ex 3926 90 97 5048 Coated interior or exterior decorative parts consisting of:
— a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and
— a PVC foil,
— not containing layers of copper, nickel or chromium,for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705 0 % p/st 31.12.2022
0.6717 ex 3926 90 97 23 Plastic cover with clips for the exterior rear-view mirror of motor vehicles 0 % p/st 31.12.2025
0.3850 ex 3926 90 97 43 Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 μm or more but not more than 4,95 μm 0 % - 31.12.2023
0.6708 ex 4009 42 00 20 Rubber brake hose with:
— textile strings,
— a wall thickness of 3,2 mm,
— a metal hollow terminal pressed on both ends, and
— one or more mounting brackets,for use in the manufacture of goods of Chapter 87 0 % - 31.12.2025
0.6844 ex 4016 93 00 30 Rectangular ethylene-propylene-diene rubber gasket, with:
— a length of 72 mm or more but not more than 825 mm,
— a width of 18 mm or more but not more than 155 mm,
— a peak temperature of 150°C or more but not more than 240 °C,
— a permissible material outflow at the place of the mold split of not more than 0,3 mm 0 % - 31.12.2025
0.6884 ex 5403 39 00 10 Biodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry 0 % - 31.12.2022
0.5059 ex 5603 13 10 20 Non-woven of spunbonded polyethylene, with a coating,
— of a weight of more than 80 g/m2 but not more than 105 g/m2 and
— an air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method) 0 % m2 31.12.2025
0.5987 ex 5603 14 90 60 Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:
— of weight of 160 g/m2 or more but not more than 300 g/m2,
— not laminated,
— with filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class M,
— pleatable 0 % m2 31.12.2023
0.4978 ex 6909 19 00 20 Silicon nitride (Si3N4) rollers or balls 0 % - 31.12.2025
0.7619 ex 7006 00 90 40 Plates of sodalime or borosilicate glass of STN (Super Twisted Nematic) or TN (Twisted Nematic) quality having:
— a length of 300 mm or more but not more than 1 500 mm,
— a width of 300 mm or more but not more than 1 500 mm,
— a thickness of 0,5 mm or more but not more than 1,1 mm,
— an indium-tin-oxide coating with a resistance of 80 Ω or more, but not more than 160 Ω on one side,
— with or without a passivation layer of silicon dioxide (SiO2) between indium-tin-oxide layer and glass surface,
— with or without a multi layer anti-reflection-coating on the other side, and
— machined (chamfered) edges 0 % - 31.12.2023
0.6870 ex 7009 10 00 40 Electrochromic self-dimming inside rear-view mirror, consisting of:
— a mirror support
— a plastic casing and
— an integrated circuitfor use in the manufacture of motor vehicles of Chapter 87 0 % - 31.12.2025
0.5021 ex 7019 19 10 20 Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate 0 % - 31.12.2025
0.5020 ex 7019 19 10 25 Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate 0 % - 31.12.2025
0.4853 ex 7202 99 80 10 Ferro-dysprosium, containing by weight:
— 78 % or more of dysprosium, and
— 18 % or more but not more than 22 % of iron 0 % - 31.12.2025
0.7502 ex 7318 24 00 40 Tube or pipe restraint joint elements:
— of stainless steel according to specification 17-4PH or of steel according to specification tool steel S7,
— produced by metal injection moulding,
— with a rockwell hardness of 38 HRC (± 1) or 53 HRC (+ 2/ – 1),
— measuring 7 mm x 4 mm x 5 mm or more, but not more than 40 mm x 20 mm x 10 mm 0 % - 31.12.2023
0.6680 ex 7326 90 98 40 Iron and steel weights
— whether or not with parts of other material
— whether or not with parts of other metals
— whether or not surface treated
— whether or not printedof a kind used for the production of remote controls 0 % - 31.12.2025
0.5029 ex 7604 29 10ex 7606 12 99ex 7606 12 99 102125 Sheets and bars of aluminium-lithium alloys 0 % - 31.12.2022
0.5487 ex 7607 11 90ex 7607 11 90ex 7607 11 90ex 7607 11 90ex 7607 11 90ex 7607 11 90 484951525356 Aluminium foil in rolls:
— having a purity of 99,99 % by weight,
— of a thickness of 0,021 mm or more but not more than 0,2 mm,
— with a width of 500 mm,
— with a surface oxide layer by 3 to 4 nm thick,
— and with a cubic texture of more than 95 % 0 % - 31.12.2021
0.4050 ex 7607 11 90 60 Plain aluminium foil with the following parameters:
— an aluminium content of 99,98 % or more,
— a thickness of 0,070 mm or more but not more than 0,125 mm,
— with a cubic texture,of a kind used for high voltage etching 3.7 % - 31.12.2021
0.7698 ex 7607 20 90 10 Aluminium foil, in rolls:
— coated on one side with polypropylene or polypropylene and acid-modified polypropylene and on the other with polyamide and polyethylene terephthalate, with adhesive layers between them,
— with a width of 200 mm or more, but not more than 400 mm,
— with a thickness of 0,138 mm or more, but not more than 0,168 mm,for use in the manufacture of lithium-ion battery cell covers 3.7 % - 31.12.2021
0.6730 ex 8101 96 00 10 Tungsten wire containing by weight 99 % or more of tungsten with:
— a maximum cross-sectional dimension of not more than 50 μm
— a resistance of 40 Ω or more but not more than 300 Ω at length of 1 metre 0 % - 31.12.2025
0.5097 ex 8104 30 00 35 Magnesium powder
— of purity by weight of more than 99,5 %
— with a particle size of 0,2 mm or more but not more than 0,8 mm 0 % - 31.12.2025
0.4904 ex 8108 90 30 45 Titanium-aluminium-vanadium alloy (TiAl6V4) wire, of a diameter less than 20 mm and complying with AMS standards 4928, 4965 or 4967 0 % - 31.12.2025
0.6805 ex 8113 00 90 20 Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules 0 % - 31.12.2025
0.5024 ex 8301 60 00ex 8419 90 85ex 8479 90 70ex 8481 90 00ex 8503 00 99ex 8515 90 80ex 8537 10 98ex 8538 90 99ex 8708 99 10ex 8708 99 97 30403050434055705522 Silicone or plastic keyboards, comprising:
— parts of common metal, and
— whether or not comprising parts of plastic,
— epoxy resin reinforced with fiberglass or wood,
— whether or not printed or surface-treated,
— with or without electrical conductors,
— with or without a membrane bonded to the keyboard,
— with or without mono or multilayer protective film 0 % p/st 31.12.2025
0.4996 ex 8407 90 90 20 Compact Liquid Petroleum Gas (LPG) Engine System, with:
— 6 cylinders,
— an output of 75 kW or more, but not more than 80 kW,
— inlet and exhaust valves modified to operate continuously in heavy duty applications,for use in the manufacture of vehicles of heading 8427 0 % - 31.12.2025
0.6160 ex 8414 30 81ex 8414 80 73 6030 Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants:
— driven by “on-off” single phase alternate current (AC) or “brushless direct current” (BLDC) variable speed motors,
— with a nominal power rating of not more than 1,5 kW,
— a rated voltage of 100 V or more but not more than 240 V,
— with a height of not more than 300 mm,
— an external diameter of not more than 150 mm,
— with a unit weight of not more than 15 kg,for use in the manufacture of heat pumps for household appliances, including clothes dryers 0 % - 31.12.2023
0.7317 ex 8414 80 22 20 Air membrane compressor with:
— a flow of 4,5 l/min or more, but not more than 7 l/min,
— power input of not more than 8,1 W, and
— a gauge pressure capacity not exceeding 400 hPa (0,4 bar),of a kind used in the production of motor vehicle seats 0 % - 31.12.2022
0.6842 ex 8415 90 00 60 Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with:
— extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm,
— a weight of 0,02 kg or more but not more than 0,25 kg 0 % p/st 31.12.2025
0.6860 ex 8415 90 00 65 Aluminium arc-welded removable receiver dryer, with polyamide and ceramic elements with:
— a length of 143 mm or more but not more than 292 mm,
— a diameter of 31 mm or more but not more than 99 mm,
— with a weight of not less than 0,12 kg and not more than 0,9 kg,
— a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, and
— a solid particle diameter of not more than 0,06 mm,for use in the manufacture of car air-conditioning systems 0 % p/st 31.12.2022
0.6821 ex 8436 99 00 10 Part containing:
— a single-phase AC motor,
— an epicyclic gearing,
— a cutter blade,and whether or not containing:
— a capacitor,
— a part fitted with a threaded bolt,for use in the manufacture of garden shredders 0 % p/st 31.12.2025
0.7380 ex 8481 80 59 30 Two-way flow control valve with housing, with:
— at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter,
— at least 330 cm3/minute, but not more than 5 000 cm3/minute flow rate,
— at least 19, but not more than 300 MPa operating pressure 0 % - 31.12.2022
0.7518 ex 8481 90 00 40 Valve armature:
— for the opening and closing of the flow of fuel,
— consisting of a shaft and a blade,
— with at least 3 but not more than 8 holes on the blade,
— made of metal and/or metal alloy(s) 0 % - 31.12.2023
0.4997 ex 8483 40 90 80 Transmission gearbox, with:
— not more than 3 gears,
— an automatic deceleration system, and
— a power reversal system,for use in the manufacture of goods of heading 8427 0 % p/st 31.12.2025
0.6854 ex 8501 10 10 20 Synchronous motor for a dishwasher with a water flow control mechanism with
— a length without axle of 24 mm (± 0,3),
— a diameter of 49,3 mm (± 0,3),
— a rated voltage of 220 V AC or more but not more than 240 V AC,
— a rated frequency of 50 Hz or more but not more than 60 Hz,
— an input power of not more than 4 W,
— a rotation speed of 4rpm or more but not more than 4,8rpm,
— an output torque of not less than 10kgf/cm 0 % - 31.12.2022
0.6858 ex 8501 10 99 64 DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve:
— with Ingress Protection (IP) standard of IP69,
— with a rotor speed of not more than 6 500 rpm when not loaded,
— with a rated voltage of 12,0 V (± 0,1),
— of a specified temperature range of – 40 °C or more, but not more than + 165 °C,
— with or without a connecting pinion,
— with or without an engine connector,
— with or without a flange,
— with a diameter of not more than 40 mm (not including the flange),
— with an overall height of not more than 90 mm (from the base to the pinion) 0 % - 30.06.2021
0.6880 ex 8501 10 99 65 Electric turbocharger actuator, with:
— a DC motor,
— an integrated gear mechanism,
— a (pulling)force of 200 N or more at a minimum of 140 °C elevated ambient temperature,
— a (pulling) force of 250 N or more in each position of its stroke,
— an effective stroke of 15 mm or more but not more than 25 mm,
— with or without an on-board diagnostics interface 0 % - 31.12.2025
0.6627 ex 8501 10 99 75 Permanently excited DC motor with
— a multiple-phase winding,
— an external diameter of 28 mm or more but not more than 35 mm,
— a rated speed of not more than 12 000 rpm,
— a power supply voltage of 8 V or more but not more than 27 V 0 % - 31.12.2025
0.4731 ex 8501 31 00 37 Permanently excited DC motor with
— a multiple-phase winding,
— an external diameter of 30 mm or more but not more than 90 mm, including mounting flange,
— a rated speed of not more than 15 000 rpm,
— an output of 45 W or more but not more than 400 W, and
— a supply voltage of 9 V or more but not more than 50 V,
— whether or not with a drive disc,
— whether or not with a crankcase,
— whether or not with a fan,
— whether or not with a cap assembly,
— whether or not with a sun gear,
— whether or not with a speed and rotational direction encoder,
— whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,
— whether or not with a mounting flange 0 % - 31.12.2024
0.5577 ex 8501 31 00 50 DC motors, brushless, with:
— an external diameter of 80 mm or more, but not more than 200 mm,
— a supply voltage of 9 V or more, but not more than 16 V,
— an output at 20 °C of 300 W or more, but not more than 750 W,
— a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,
— a rated speed at 20 °C of 600 rpm or more, but not more than 3 100 rpm,
— with or without a pulley,
— with or without an electronic power steering sensor/controller 0 % - 31.12.2022
0.6809 ex 8501 31 00ex 8501 32 00 5345 Automotive-ready, brushless and permanently excited direct current motor with:
— a specified speed of not more than 4 100 rpm,
— a minimum output of 400 W, but not more than 1,3 kW (at 12 V),
— a flange diameter of 85 mm or more, but not more than 200 mm,
— a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending,
— a housing length of not more than 265 mm, measured from the flange to the outer ending, 0 % - 31.12.2025
   
— a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),
— a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and
— surface magnets,
— whether or not with electronic power steering controller   
0.6161 ex 8503 00 99 55 Stator for brushless motor, with:
— an internal diameter of 206,6 mm (± 0,5),
— an external diameter of 265,0 mm (± 0,2), and
— a width of 37,2 mm or more but not more than 47,8 mm,of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums 0 % p/st 31.12.2025
0.7764 ex 8504 31 80 55 Electrical transformer with:
— a capacity of 0,22 kVA or more, but not more than 0,24 kVA,
— an operating temperature range of + 10°C or more, but not more than + 125°C,
— four or five inductively coupled copper wire windings,
— 11 or 12 connection pins at the bottom, and
— dimensions of not more than 32 mm x 37,8 mm x 25,8 mm 0 % - 31.12.2024
0.7788 ex 8505 11 00 68 Blocks made of neodymium, iron and boron or an alloy of samarium and cobalt, whether or not covered with zinc, intended to become permanent magnets after magnetisation with:
— a length of 13,8 mm or more but not more than 45,2 mm,
— a width of 7,8 mm or more but not more than 25,2 mm,
— a height of 1,3 mm or more but not more than 4,7 mm 0 % - 31.12.2024
0.6857 ex 8505 11 00ex 8505 19 90 7335 Articles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with:
— a length of 5 mm or more, but not more than 60 mm,
— a width of 5 mm or more, but not more than 40 mm,
— a thickness of 3 mm or more, but not more than 15 mm 0 % p/st 31.12.2022
0.7641 ex 8507 60 00 13 Prismatic lithium-ion electric accumulators with:
— a width of 173,0 mm (± 0,3 mm),
— a thickness of 45,0 mm (± 0,3 mm),
— a height 125,0 mm (± 0,3 mm),
— a nominal voltage of 3,67 V (± 0,01 V), and
— a nominal capacity of 94 Ah and/or 120 Ah,for use in the manufacture of rechargeable electric vehicle batteries 1.3 % - 31.12.2021
0.6685 ex 8507 60 00 15 Cylindrical lithium-ion-accumulators or modules with:
— a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,
— a nominal voltage of 36 V or more, but not more than 48 V,
— a power of 300 Wh or more, but not more than 648 Wh,for use in the manufacture of electric bicycles 1.3 % - 31.12.2021
0.6625 ex 8507 60 00 17 Lithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with:
— a rated voltage of 12 V,
— a length of 350 mm or more but not more than 355 mm,
— a width of 170 mm or more but not more than 180 mm,
— a height of 180 mm or more but not more than 195 mm,
— weighing 10 kg or more but not more than 15 kg,
— a nominal charge of 60 Ah or more, but not more than 80 Ah 1.3 % - 31.12.2021
0.7663 ex 8507 60 00 18 Lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with:
— a length of not more than 1 600 mm,
— a width of not more than 448 mm,
— a height of not more than 395 mm,
— a nominal voltage of 280 V or more but not more than 400 V,
— a nominal capacity of 9,7 Ah or more but not more than 10,35 Ah,
— a charging voltage of 110 V or more but not more than 230 V, and
— containing 6 modules with 90 cells or more but not more than 96 cells enclosed in a steel casing,for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703 1.3 % - 31.12.2021
0.7717 ex 8507 60 00 22 Integrated battery system in a metal case with holders, consisting of:
— a lithium-ion battery with voltage of 48 V (± 5 V) and capacity of 0,44 kWh (± 0,05 kWh),
— Battery Management System,
— a relay,
— a low voltage converter (DC/DC),
— at least one connector,for use in the manufacture of hybrid motor vehicles 1.3 % - 31.12.2021
0.2907 ex 8507 60 00 30 Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries 1.3 % - 31.12.2021
0.6703 ex 8507 60 00 33 Lithium-ion accumulator, with:
— a length of 150 mm or more, but not more than 1 000 mm,
— a width of 100 mm or more, but not more than 1 000 mm,
— a height of 200 mm or more, but not more than 1 500 mm,
— a weight of 75 kg or more, but not more than 200 kg,
— a nominal capacity not less than 150Ah and not more than 500 Ah,
— a nominal output voltage of 230V AC (Line to neutral) or a nominal voltage of 64V (±10 %) 1.3 % - 31.12.2021
0.6702 ex 8507 60 00 37 Lithium-ion accumulator, with:
— a length of 1 200 mm or more, but not more than 2 000 mm,
— a width of 800 mm or more, but not more than 1 300 mm,
— a height of 2 000 mm or more, but not more than 2 800 mm,
— a weight of 1 800 kg or more, but not more than 3 000 kg,
— a nominal capacity of 2 800 Ah or more but not more than 7 200 Ah 1.3 % - 31.12.2021
0.5548 ex 8507 60 00 50 Modules for the assembly of batteries of ion lithium electric accumulators with:
— a length of 298 mm or more, but not more than 500 mm,
— a width of 33,5 mm or more, but not more than 209 mm,
— a height of 75 mm or more, but not more than 228 mm,
— a weight of 3,6 kg or more, but not more than 17 kg, and
— a nominal energy of 458 Wh or more, but not more than 2 158 Wh 1.3 % - 31.12.2021
0.5342 ex 8507 60 00 65 Cylindrical lithium ion cell with
— 3,5 VDC to 3,8 VDC,
— 300 mAh to 900 mAh, and
— a diameter of 10,0 mm to 14,5 mm 1.3 % - 31.12.2021
0.7888 ex 8507 60 00 68 Lithium-ion accumulator in a metal housing, with
— a length of 65 mm or more, but not more than 225 mm,
— a width of 10 mm or more, but not more than 75 mm,
— a height of 60 mm or more, but not more than 285 mm,
— a nominal voltage of 2,1 V or more, but not more than 3,8 V, and
— a nominal capacity of 2,5 Ah or more, but not more than 325 Ah 1.3 % - 31.12.2021
0.5356 ex 8507 60 00 75 Rectangular lithium-ion-accumulator, with
— a metal casing,
— a length of 173 mm (± 0,15 mm),
— a width of 21 mm (± 0,1 mm),
— a height of 91 mm (± 0,15 mm),
— a nominal voltage of 3,3 V, and
— a nominal capacity of 21 Ah or more 1.3 % - 31.12.2021
0.6753 ex 8507 60 00 77 Lithium-ion rechargeable batteries, with:
— a length of 700 mm or more, but not more than 2 820 mm,
— a width of 935 mm or more, but not more than 1 660 mm,
— a height of 85 mm or more, but not more than 700 mm,
— a weight of 250 kg or more, but not more than 700 kg,
— a power of not more than 175 kWh,
— a nominal voltage of 400 V 1.3 % - 31.12.2021
0.5014 ex 8508 70 00ex 8537 10 98 2098 Electronic circuit cards that:
— are connected by wire or radio frequency to each other and the motor controller card, and
— regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,
— whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full) 0 % p/st 31.12.2025
0.6856 ex 8512 20 00 30 Lighting module, containing at least:
— two LEDs,
— glass or plastic lenses, focusing/scattering the light emitted by the LEDs,
— reflectors redirecting the light emitted by the LEDs,in an aluminium housing with a radiator, mounted at a bracket with an actuator 0 % p/st 31.12.2025
0.6863 ex 8512 30 90 20 Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:
— a printed circuit board,
— a connector,
— whether or not a metal holder,for use in the manufacture of goods of Chapter 87 0 % p/st 31.12.2022
0.6689 ex 8529 90 65 28 Electronic assembly comprising at least:
— a printed circuit board with,
— one or more FPGAs (Field Programmable Gate Array) and/or processors for multi-media applications and video signal processing,
— flash memory,
— operating memory,
— with or without one or more USB, HDMI, VGA-, RJ-45 and/or other multimedia interfaces,
— sockets and plugs for connecting a LCD-display, a LED lighting and a control panel 0 % p/st 31.12.2025
0.4893 ex 8529 90 65ex 8529 90 92 6553 Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module 0 % p/st 31.12.2025
0.4890 ex 8529 90 92 25 LCD modules, not combined with touch screen facilities, solely consisting of:
— one or more TFT glass or plastic cells,
— a die cast heat sink,
— a backlight unit,
— one printed circuit board with micro controller, and
— LVDS (Low Voltage Differential Signalling) interface,for use in the manufacture of radios for motor vehicles 0 % p/st 31.12.2025
0.6654 ex 8529 90 92 37 Fastening and covering ledges of aluminium alloy containing:
— silicon and magnesium,
— with a length of 300 mm or more but not more than 2 200 mm,specifically shaped for use in the manufacture of TV sets 0 % - 31.12.2025
0.6629 ex 8529 90 92 63 LCD module
— with a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,
— with or without a touch screen,
— with an LED backlight,
— with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,
— with a plug for power supply and CAN and LVDS interfaces,
— with or without electronic components for dynamic adjustments of colour,
— in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,suitable for installation in motor vehicles of Chapter 87 0 % p/st 31.12.2025
0.5018 ex 8529 90 92 67 Colour LCD display panel for LCD monitors of heading 8528:
— with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,
— with or without a touch screen,
— with backlight, micro-controller,
— with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,
— in a housing with or without a heat sink at the back of the housing,
— without a signal-processing module,
— whether or not with haptic and acoustical feedback,for use in the manufacture of vehicles of Chapter 87 0 % p/st 31.12.2025
0.6781 ex 8529 90 92 85 Colour LCD module in a housing:
— with a diagonal screen measurement of 14,48 cm or more but not more than 26 cm,
— without touch screen,
— with a backlight and micro-controller,
— with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector,
— without a signal processing module,
— with control electronics for pixel addressing only,
— with a motorised mechanism for moving the display screen,for permanent installation in vehicles of Chapter 87 0 % p/st 31.12.2025
0.6849 ex 8536 69 90 60 Electrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processors 0 % p/st 31.12.2022
0.5028 ex 8536 69 90 84 Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 8528 0 % p/st 31.12.2025
0.6864 ex 8537 10 91 50 Fuse control module in a plastic housing with mounting brackets comprising:
— sockets with or without fuses,
— connecting ports,
— a printed circuit board with embedded microprocessor, micro switch and relay,of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2025
0.6889 ex 8537 10 98 35 Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing:
— 2 rotary knobs
— 27 or more pushbuttons
— LED lights
— 2 integrated circuits for receiving and sending of control signals via the LIN-bus 0 % p/st 31.12.2025
0.6866 ex 8538 90 91ex 8538 90 99 2050 Interior antenna for a car door locking system, comprising:
— an antenna module in a plastic housing,
— a connection cable with a plug,
— at least two mounting brackets,whether or not PCB including integrated circuits, diodes and transistors,for use in the manufacture of goods of Chapter 87 0 % p/st 31.12.2025
0.6710 ex 8544 30 00ex 8544 42 90 6050 Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 87 0 % - 31.12.2025
0.6867 ex 8544 30 00 85 Extension two-core cable with two connectors, containing at least:
— a rubber grommet,
— a metal attachment bracket,of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87 0 % p/st 31.12.2025
0.6853 ex 8544 42 90 70 Electric conductors:
— of a voltage of not more than 80 V,
— with a length of not more than 120 cm,
— fitted with connectors,for use in the manufacture of hearing aids, accessory kits and speech processors 0 % p/st 31.12.2025
0.6861 ex 8544 49 93 30 Electric conductors:
— of a voltage of not more than 80 V,
— of a platinum-iridium-alloy,
— coated with poly(tetrafluoroethylene),
— without connectors,for use in the manufacture of hearing aids, implants and speech processors 0 % m 31.12.2025
0.5002 ex 8545 90 90 40 Corrosion resistant, layered technical fibre substrate of a gas diffuser layer with:
— controlled fibre length, flex strength, porosity, thermal conductance, electrical resistance,
— a thickness of less than 600 μm,
— a weight of less than 500 g/m2 0 % m2 31.12.2021
0.6707 ex 8708 30 10ex 8708 30 91 7040 Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2025
0.6869 ex 8708 40 20ex 8708 40 50 2010 Automatic hydrodynamic gearbox
— with a hydraulic torque converter,
— without transfer box and cardan shaft,
— whether or not with front differential,for use in the manufacture of motor vehicles of Chapter 87 0 % p/st 31.12.2025
0.6648 ex 8708 50 20ex 8708 50 99 2010 Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle
— of a length of 1 m or more but not more than 2 m,
— of a weight of 6 kg or more but not more than 9 kg 0 % p/st 31.12.2025
0.6711 ex 8708 80 20ex 8708 80 35 1010 Upper strut insulator containing:
— a metal holder with three mounting screws, and
— a rubber bump,for use in the manufacture of goods of Chapter 87 0 % p/st 31.12.2025
0.6859 ex 8708 91 20ex 8708 91 99 3030 Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:
— an insulating area flatness of not more than 0,1 mm,
— a permissible particle quantity of 0,3 mg per tank,
— a distance between pores of 2 mm or more,
— pore sizes of not more than 0,4 mm, and
— not more than 3 pores larger than 0,2 mm,of a kind used in heat exchangers for car cooling systems 0 % p/st 31.12.2025
0.7716 ex 8708 91 35 20 Turbocharger cooling duct containing:
— an aluminium alloy duct with at least one metal holder and at least two mounting holes,
— a rubber pipe with clips,
— a stainless steel flange highly resistant to corrosion [SUS430JIL],for use in the manufacture of compression ignition engines of motor vehicles 0 % - 31.12.2024
0.6687 ex 8708 95 10ex 8708 95 99 1020 Inflatable safety cushion of high strength polyamide fibre:
— sewn,
— folded into three-dimensional packing form, fixed by thermal forming, or flat (unfolded) safety cushion with or without thermal forming 0 % p/st 31.12.2025
0.6688 ex 8708 95 10ex 8708 95 99 2030 Inflatable safety cushion of high strength polyamide fibre:
— sewn,
— folded,
— with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing,
— suitable for cool inflator technology 0 % p/st 31.12.2025
0.7581 ex 8708 50 20ex 8708 50 99 6015 Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:
— at least an actuator,
— whether or not an interior distribution by chain 0 % - 31.12.2024
0.6686 ex 8714 10 90 10 
— Motorcycle fork rod inner tubes:
— of SAE1541 carbon steel,
— with a hard chromium layer of 20 μm (+ 15 μm/ – 5 μm),
— having a wall thickness of 1,3 mm or more, but not more than 1,6 mm,
— having an elongation at break of 15 %,
— perforated 0 % p/st 31.12.2025
0.6848 ex 8714 10 90 70 Motor bikes radiators in consignment of 100 pieces or more 0 % p/st 31.12.2022
0.6879 ex 8714 96 10 10 Pedals, for use in the manufacture of bicycles (including electric bicycles) 0 % - 31.12.2025
0.6878 ex 8714 99 90 30 Seat posts, for use in the manufacture of bicycles (including electric bicycles) 0 % p/st 31.12.2025
0.4883 ex 9001 90 00 85 Light guide panel made of poly(methyl methacrylate):
— whether or not cut,
— whether or not printed,for use in the manufacture of backlight units for flat screen TVs 0 % - 31.12.2025
0.7590 ex 9002 11 00 18 Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:
— a horizontal field of view range to a maximum of 120 deg,
— a diagonal field of view range to a maximum of 92 deg,
— a focal length to a maximum of 7,50 mm,
— a relative aperture of a maximum of F/2,90,
— a maximum diameter of 22 mm 0 % - 31.12.2023
0.5692 ex 9002 11 00 20 Lenses:
— measuring not more than 95 mm × 55 mm × 50 mm,
— with a resolution of 160 lines/mm or better, and
— with a zoom ratio of 3 or more times 0 % - 31.12.2022
0.5025 ex 9401 90 80 10 Ratchet disk for use in the manufacture of reclining car seats 0 % p/st 31.12.2025
0.4846 ex 9503 00 75ex 9503 00 95 1010 Plastic cable car scale models, whether or not with a motor, for printing 0 % p/st 31.12.2025
0.6950 ex 9607 20 10 10 Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers 0 % - 31.12.2022
0.6949 ex 9607 20 90 10 Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers 0 % - 31.12.2025



((3)) the following entries are added or inserted according to the numerical order of the CN and TARIC codes in the second and third columns:

Serial Number CN code TARIC Description Rate of autonomous duty Supplementary Unit Date foreseen for mandatory review
‘0.8021 2804 70 10  Red phosphorus 0 % - 31.12.2022
0.8022 2804 70 90  Phosphorus, other than red phosphorus 0 % - 31.12.2023
0.7974 ex 2903 39 19 40 3-(Bromomethyl)pentane (CAS RN 3814-34-4) with a purity by weight of 99 % or more 0 % - 31.12.2025
0.8017 ex 2903 99 80 25 2,2'-Dibromobiphenyl (CAS RN 13029-09-9) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.8018 ex 2903 99 80 35 2-Bromo-9,9'-spirobi[9H-fluoren] (CAS RN 171408-76-7) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.7957 ex 2904 99 00 55 2,4-dichloro-1,3-dinitro-5-(trifluoromethyl)benzene (CAS RN 29091-09-6) with a purity by weight of 96 % or more 0 % - 31.12.2025
0.7963 ex 2906 29 00 70 1,2,3,4-Tetrahydro-1-naphthol (CAS RN 529-33-9) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.8015 ex 2914 29 00 35 4-(trans-4-Propylcyclohexyl)cyclohexanone (CAS RN 82832-73-3) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.7955 ex 2915 24 00 10 Acetic anhydride (CAS RN 108-24-7) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.7980 ex 2916 19 95 60 Methyl 2-fluoroprop-2-enoate (CAS RN 2343-89-7) with a purity by weight of 93 % or more, whether or not with not more than 7 % of the stabiliser 2,6-di-tert-butyl-p-cresol (CAS RN 128-37-0) and Tetrabutylammonium nitrite (CAS RN 26501-54-2) 0 % - 31.12.2025
0.7940 ex 2916 19 95 70 Methyl 3-methyl-2-butenoate (CAS RN 924-50-5) with a purity by weight of 99,0 % or more 0 % - 31.12.2025
0.7931 ex 2916 20 00 25 Cyclohexanecarbonyl chloride (CAS RN 2719-27-9) with a purity by weight of 99 % or more 0 % - 31.12.2025
0.7933 ex 2916 20 00 35 2-Cyclopropylacetic acid (CAS RN 5239-82-7) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.7929 ex 2916 39 90 16 3-Fluoro-5-iodo-4-methylbenzoic acid (CAS RN 861905-94-4) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.8008 ex 2918 29 00 40 3-Hydroxy-4-nitrobenzoic acid (CAS RN 619-14-7) with a purity by weight of more than 96,5 % 0 % - 31.12.2025
0.7934 ex 2918 99 90 43 Vanillic acid (CAS RN 121-34-6) with a purity by weight of 98,5 % or more 0 % - 31.12.2025
0.7947 ex 2921 29 00 70 N,N,N',N'-tetramethylethylenediamine (CAS RN 110-18-9) with a purity by weight of 99 % or more 0 % - 31.12.2025
0.8019 ex 2921 49 00 45 2-(4-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 897671-69-1) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.8020 ex 2921 49 00 55 2-(2-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 1198395-24-2) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.7946 ex 2922 19 00 29 N-Methyl-N-(2-hydroxyethyl)-p-toluidine (CAS RN 2842-44-6) with a purity by weight of 99 % or more 0 % - 31.12.2025
0.7935 ex 2922 19 00 70 2-Benzylaminoethanol (CAS 104-63-2) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.8000 ex 2924 19 00 18 2-(((Butylamino)carbonyl)oxy)ethyl acrylate (CAS RN 63225-53-6) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.8013 ex 2925 19 95 40 N-Iodosuccinimide (CAS RN 516-12-1) with a purity by weight of 98,5 % or more 0 % - 31.12.2025
0.7985 ex 2930 90 98 88 1-{4-[(4-Benzoylphenyl)sulphanyl]phenyl}-2-methyl-2-[(4-methylphenyl)sulphonyl]propan-1-one (CAS RN 272460-97-6) with a purity by weight of 94 % or more 0 % - 31.12.2025
0.7951 ex 2931 90 00 25 N-(3-(dimethoxymethylsilyl)propyl)ethylenediamine (CAS RN 3069-29-2) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.7958 ex 2932 20 90 18 4-Hydroxycoumarin (CAS-RN 1076-38-6) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.7984 ex 2932 20 90 23 1,4-Dioxane-2,5-dione (CAS RN 502-97-6) with a purity by weight of 99,5 % or more 0 % - 31.12.2025
0.7978 ex 2932 99 00 68 3,9-Diethylidene-2,4,8,10-tetraoxaspiro[5.5]undecane (CAS RN 65967-52-4) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.7930 ex 2932 99 00 73 5-Fluoro-3-methylbenzofuran-2-carboxylic acid (CAS RN 81718-76-5) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.7936 ex 2932 99 00 78 Methyl 2,2-difluoro-1,3-benzodioxole-5-carboxylate (CAS RN 773873-95-3) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.7954 ex 2932 99 00 83 6,11-Dihydrodibenz[b,e]oxepin-11-one (CAS RN 4504-87-4) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.7938 ex 2933 19 90 43 tert-Butyl 2-(3,5-dimethyl-1H-pyrazol-4-yl)acetate (CAS RN 1082827-81-3) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.7937 ex 2933 29 90 23 1,1'-Thiocarbonylbis(imidazole) (CAS RN 6160-65-2) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.7976 ex 2933 39 99 83 2-Hydroxy-4-azoniaspiro[3,5]nonane chloride (CAS RN 15285-58-2) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.7925 ex 2933 39 99 84 Diethyl(3-pyridyl)borane (CAS RN 89878-14-8) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.7981 ex 2933 39 99 86 3-(N-hydroxycarbamimidoyl)pyridine 1-oxide (CAS RN 92757-16-9) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.7939 ex 2933 39 99 87 6-Chloro-N-(2,2-dimethylpropyl)pyridine-3-carboxamide (CAS RN 585544-20-3) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.7986 ex 2933 39 99 88 Benzyl 4-amino-3-chloro-6-(4-chloro-2-fluoro-3-methoxyphenyl)-5-fluoropyridine-2-carboxylate (CAS RN 1390661-72-9) with a purity by weight of 92 % or more 0 % - 31.12.2025
0.7952 ex 2933 69 80 33 2,4,6-Trichloro-1,3,5-triazine (CAS RN 108-77-0) with a purity by weight of 99 % or more 0 % - 31.12.2025
0.7927 ex 2933 99 80 60 2-[(6,11-Dihydro-5H-dibenz[b,e]azepin-6-yl)-methyl]-1H-isoindole-1,3(2H)-dione (CAS RN 143878-20-0) with a purity by weight of 99 % or more 0 % - 31.12.2025
0.7971 ex 2933 99 80 70 5-(Bis-(2-hydroxyethyl)-amino)-1-methyl-1H-benzimidazole-2-butanoic acid ethyl ester (CAS RN 3543-74-6) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.8014 ex 2933 99 80 80 Pyrrole-2-carboxaldehyde (CAS RN 1003-29-8) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.7926 ex 2934 99 90 65 Benzo[b]thiophen-10-methoxycycloheptanone (CAS RN 59743-84-9) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.7944 ex 2934 99 90 70 1,3,4-thiadiazolidine-2,5-dithione (CAS RN 1072-71-5) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.7928 ex 2935 90 90 44 4-[2-(7-Methoxy-4,4-dimethyl-1,3-dioxo-3,4-dihydroisoquinolin-2(1H)-yl)ethyl]bezenesulphonamide (CAS RN 33456-68-7) with a purity by weight of 99,5 % or more 0 % - 31.12.2025
0.7943 ex 3201 90 20 10 Rhus chinensis gall (Galla chinensis) water-based extract, with a tannin content by weight of 85 % or less 0 % - 31.12.2025
0.7975 ex 3801 10 00 10 Artificial graphite in powder form, (CAS RN 7782-42-5) with:
— a secondary particle structure which is aggregated from smaller primary particles,
— without coating on the surface,
— particle size represented by d50 value of 13,5 μm (± 0,5),
— specific surface area (measured by BET) less than 2,0 m2/g,
— tap density: 1,10 ~ 1,70 g/cm3,
— specific Discharge Capacity of 351,0 mAh/g (± 3,0),
— initial efficiency of 94,0 % (± 1,0) 1.8 % - 31.12.2021
0.7994 ex 3801 10 00 20 Artificial graphite (CAS RN 7782-42-5) powder form, with:
— specific surface area (measured by BET) of 0,8 m2/g (± 0,25),
— tap density: 0,85 g/cm3 (± 0,10),
— particle size represented by d50 value of 21,0 μm (± 2,0),
— specific discharge capacity of 351,0 mAh/g (± 3,0),
— initial efficiency of 94,0 % (± 2,0) 1.8 % - 31.12.2021
0.7998 ex 3815 90 90 38 Photoinitiator, containing by weight:
— 80 % or more of polyethylene glycol di[β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate (CAS RN 886463-10-1),
— not more than 17 % of polyethylene glycol [β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate 0 % - 31.12.2025
0.7999 ex 3815 90 90 48 Photoinitiator containing by weight:
— 88 % or more of α-(2-benzoylbenzoyl)-ω-[(2-benzoylbenzoyl)oxy]-poly(oxy-1,2-ethanediyl) (CAS RN 1246194-73-9),
— not more than 12 % of α-(2-benzoylbenzoyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl) (CAS RN 1648797-60-7) 0 % - 31.12.2025
0.7950 ex 3902 90 90 65 Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 39 0 % - 31.12.2025
0.7953 ex 3910 00 00 65 Liquid copolymer based on polydimethylsiloxane with terminal epoxide groups CAS RN 2102536-93-4) 0 % - 31.12.2025
0.8009 ex 3911 90 99 38 Mixture containing by weight:
— 90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and
— 10 % (± 1 %) of a hydrogenated styrene butadiene copolymer (CAS RN 66070-58-4) 0 % - 31.12.2025
0.8010 ex 3911 90 99 48 Mixture containing by weight:
— 90 % (± 1 %) of 1,4:5,8-dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and
— 10 % (± 1 %) of an ethylene-propylene copolymer (CAS RN 9010-79-1) 0 % - 31.12.2025
0.7949 ex 3920 61 00 40 Extruded thermoplastic foils or films of polycarbonate with:
— matt surface texture on both sides,
— a thickness of more than 50 μm but not more than 200 μm,
— a width of 800 mm or more, but not more than 1 500 mm, and
— a length of 915 m or more, but not more 2 500 m,for use in the production of retroreflective products 0 % - 31.12.2025
0.8011 ex 3920 62 19ex 3920 62 90 6820 Poly(ethylene terephthalate) film in rolls:
— with a thickness of 50 μm or more but not more than 350 μm, and
— covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm 0 % - 31.12.2025
0.8005 ex 3920 99 28 48 Thermoplastic polyurethane foil in rolls, with:
— a width of 900 mm or more but not more than 1 016 mm,
— a matt finish,
— a thickness of 0,4 mm (± 8 %),
— an elongation at break of 480 % or more (ASTM D412 (Die C)),
— a tensil strength in machine direction of 470 (± 10) kg/cm2 (ASTM D412 (Die C)),
— a Shore A hardness of 90 (± 3) (ASTM D2240),
— a tear strength of 100 (± 10) kg/cm2 (ASTM D624 (Die C)),
— a melting point of 165°C (± 10 °C) 0 % - 31.12.2025
0.8024 ex 5603 14 10 20 Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:
— of weight of 160 g/m2 or more but not more than 300 g/m2
— laminated on one side with a membrane or a membrane and aluminium
— with filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class M
— pleatable 0 % m2 31.12.2023
0.8028 ex 6909 19 00 40 Ceramic-carbon absorption cartridges with the following characteristics:
— extruded fired ceramic bound multicellular cylindrical structure,
— 10 % or more by weight but not more than 35 % by weight of activated carbon,
— 65 % or more by weight but not more than 90 % by weight of ceramic binder,
— with a diameter of 29 mm or more but not more than 41 mm,
— a length of not more than 150 mm,
— fired at temperature of 800 °C or more, and
— for vapours adsorption,of a kind used for assembly in fuel vapours absorbers in fuel systems of motor vehicles 0 % p/st 31.12.2025
0.7913 ex 7506 20 00 20 Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with:
— a thickness of 0,5 mm or more but not more than 3 mm,
— a width of 250 mm or more but not more than 1 219 mm 0 % - 31.12.2025
0.7997 ex 7616 99 90 35 Aluminium plate with:
— a length of 36 mm or more but not more than 49 mm,
— a width of 29,8 mm or more but not more than 45,2 mm,
— a thickness of 0,18 mm or more but not more than 0,66 mm,equipped with a polypropylene tape with:
— a length of 6,5 mm or more but not more than 16,5 mm,
— a width of 39 mm or more but not more than 56 mm,
— characteristic allowing to create solid joint with Pouch external layer by melting process assuring leak and pressure proof sealing of Cell,
— resistance to influence of electrolyte,for use in the manufacture of lithium-ion battery cells for motor vehicle batteries 3 % - 31.12.2021
0.7966 ex 8104 19 00 10 Unwrought magnesium containing 93 % or more but not more than 99,7 % by weight of magnesium 0 % - 31.12.2025
0.7942 ex 8108 90 30 35 Bars and wires of titanium with a titanium content of 98,8 % or more but not more than 99,9 % of a diameter less than 20 mm 0 % - 31.12.2025
0.8012 ex 8406 82 00 10 Industrial steam turbine with:
— an output of 5 MW or more but not more than 40 MW,
— designed for a pressure of not more than 140 bar and a temperature of not more than 540 °C,
— equipped with double seat valves on the live steam side which are operated with a hydraulic servo of not more than 12 bar 0 % - 31.12.2025
0.7961 ex 8409 91 00ex 8481 90 00 5560 Nozzle body for the regulation of angle and distribution of fuel injection:
— of a cylindrical shape,
— made of stainless steel,
— with 4 or more, but not more than 16 holes,
— with a flow rate of 100 cm3/minute or more, but not more than 500 cm3/minute 0 % - 31.12.2025
0.7965 ex 8409 91 00 75 Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with:
— an inlet diameter of 2 mm or more, but not more than 10 mm,
— an outlet diameter of 2 mm or more, but not more than 10 mm,
— an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection,
— a plastic covering moulded around a stainless steel tube 0 % - 31.12.2025
0.7967 ex 8409 91 00ex 8481 90 00 8070 Nozzle needle for opening and closing the flow of fuel in the engine, with:
— 2 holes,
— 4 grooves,
— a diameter of 3 mm or more, but not more than 6 mm,
— a length of 25 mm or more, but not more than 35 mm,
— made of stainless steel with hard-chrome plating 0 % - 31.12.2025
0.7969 ex 8413 30 20 40 High-pressure plunger pump for direct diesel injection, with:
— an operating pressure of not more than 275 MPa,
— a camshaft,
— a fluid discharging of 15 cm3 per minute or more, but not more than 1 800 cm3 per minute,
— an electric pressure regulating valve 0 % - 31.12.2025
0.7970 ex 8413 30 20 50 High-pressure plunger pump for direct diesel injection:
— with an operating pressure of not more than 275 MPa,
— designed to contact the crankshaft,
— with an electromagnetic valve 0 % - 31.12.2025
0.7996 ex 8418 99 90 20 Aluminium connecting block for connecting to a condenser manifold in welding process:
— hardened to T6 or T5 temper,
— with a weight of not more than 150 g,
— with a length of 20 mm or more but not more than 150 mm,
— with a fixing rail in one piece 0 % - 31.12.2025
0.8004 ex 8418 99 90 30 Receiver dryer profile for connecting to a condenser manifold in welding process with:
— a braze flatness of not more than 0,2 mm,
— a weight of 100 g or more but not more than 600 g,
— a fixing rail in one piece 0 % - 31.12.2025
0.7979 ex 8479 89 97 55 Integrated automated turnkey machinery line for manufacturing jelly rolls of cylindrical lithium ion battery cells by winding, tab assembly and cutting of cathode, separator and anode 0.8 % - 31.12.2021
0.7982 ex 8479 89 97 65 Integrated automated turnkey machinery line for the assembly of battery cells to cylindrical lithium ion batteries with a speed of 300 parts per minute and production line 0.8 % - 31.12.2021
0.7964 ex 8479 90 70 40 Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft:
— of a circular shape,
— made of steel alloy with sintering process,
— with not more than 8 oil chambers,
— with a Rockwell hardness of 55 or more,
— with a density of 6,5 g/cm3, or more, but not more than 6,7 g/cm3 0 % - 31.12.2025
0.7968 ex 8481 30 91ex 8481 30 99 3050 Mechanical check (non-return) valve for opening and closing of the flow of fuel:
— with an operating pressure of not more than 250 MPa,
— with a flow rate of 45 cm3/minute or more, but not more than 55 cm3/minute,
— with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm,
— made of steel 0 % - 31.12.2025
0.7960 ex 8481 80 59ex 8481 90 00 7080 Flow-control valve
— made of steel,
— with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,
— with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm 0 % - 31.12.2025
0.7972 ex 8527 29 00ex 8529 90 65 1038 Satellite radio receiver module:
— with a rectangular shape of dimensions 70,5 x 44,9 x 10,5 mm,
— comprising of heat sink and a printed circuit board with resistors, capacitors, transistors, coils, diodes and IC,
— being able to process radio frequency signals,
— with a medium frequency unit,for use in the manufacture of products falling under heading 8527 0 % - 31.12.2025
0.7987 ex 8708 50 20ex 8708 50 55 1550 Spherical outboard constant velocity joint ball bearing cage, part of the vehicle’s drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened 0 % - 31.12.2025
0.7988 ex 8708 50 20ex 8708 50 99 2545 Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:
— 6 ball tracks or more but not more than 8, with
— a thread,
— an external involute spline with 21 or more but not more than 38 teeth,
— for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %,
— forged, turned, milled and hardened 0 % - 31.12.2025
0.7989 ex 8708 50 20ex 8708 50 99 3550 Inboard constant velocity joint tripod housing, with:
— an outer diameter of 67,0 mm or more but not more than 99,0 mm,
— 3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,
— an external spline with 21 teeth or more but not more than 41,
— forged, turned, rolled and hardened 0 % - 31.12.2025
0.7990 ex 8708 50 20ex 8708 50 99 4555 Outboard constant velocity joint inner race, part of the vehicle’s drive system, with:
— 6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm,
— forged, turned, milled, broached and hardened 0 % - 31.12.2025
0.7991 ex 8708 50 20ex 8708 50 99 5560 Inboard constant velocity joint tripod spider, part of the vehicle’s drive system, with:
— 3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,
— forged, turned, broached and hardened 0 % - 31.12.2025
0.7973 ex 9002 11 00 23 Lenses with:
— motorized focus, zoom, aperture,
— electronically switchable infrared cut filter,
— an adjustable focal length not less than 2,7 mm and not more than 55 mm,
— a weight of not more than 100 g,
— a length of less than 70 mm,
— a diameter of not more than 60 mm 0 % - 31.12.2025

