
COMMISSION IMPLEMENTING REGULATION (EU) 2019/403 of 13 March 2019 granting a Union authorisation for the biocidal product family ‘Deosan Activate BPF based on Iodine’ 

THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products, and in particular Article 44(5) thereof,
Whereas:

(1) On 7 July 2015, Diversey Europe Operations B.V. submitted an application in accordance with Article 43(1) of Regulation (EU) No 528/2012 for authorisation of a biocidal product family named ‘Deosan Activate BPF based on Iodine’ (‘the product family’) of product-type 3, as described in Annex V to that Regulation. The competent authority of United Kingdom agreed to evaluate the application as referred to in Article 43(1) of Regulation (EU) No 528/2012. The application was recorded under the case number BC-JN018376-30 in the Register for Biocidal Products.

(2) The biocidal product family contains iodine, as the active substance, which is included in the Union list of approved active substances referred to in Article 9(2) of Regulation (EU) No 528/2012. Taking into account the intrinsic properties of the active substance, and the scientific criteria for the determination of endocrine-disrupting properties set out in Commission Delegated Regulation (EU) 2017/2100, the Commission will consider the need to review the approval of iodine, including polyvinylpyrrolidone iodine, in accordance with Article 15 of Regulation (EU) No 528/2012. Depending on the outcome of that review, the Commission will then consider whether the Union authorisations for products containing the active substance have to be reviewed in accordance with Article 48 of Regulation (EU) No 528/2012.

(3) On 20 December 2017, the evaluating competent authority submitted, in accordance with Article 44(1) of Regulation (EU) No 528/2012, the assessment report and the conclusions of its evaluation to the European Chemicals Agency (‘the Agency’).

(4) On 6 July 2018, the Agency submitted to the Commission an opinion, including the draft summary of the biocidal product characteristics (‘SPC’) of the product family and the final assessment report on the product family in accordance with Article 44(3) of Regulation (EU) No 528/2012. The opinion concludes that the product family falls within the definition of ‘biocidal product family’ laid down in Article 3(1)(s) of Regulation (EU) No 528/2012, that it is eligible for Union authorisation in accordance with Article 42(1) of that Regulation and that subject to compliance with the draft SPC, the product family meets the conditions laid down in Article 19(1) and (6) of that Regulation.

(5) On 17 September 2018, the Agency transmitted to the Commission the draft SPC in all the official languages of the Union in accordance with Article 44(4) of Regulation (EU) No 528/2012.

(6) The Commission concurs with the opinion of the Agency and considers it therefore appropriate to grant a Union authorisation for the biocidal product family.

(7) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Biocidal Products,
HAS ADOPTED THIS REGULATION:

Article 1 
A Union authorisation is granted to Diversey Europe Operations B.V. for the biocidal product family ‘Deosan Activate BPF based on Iodine’ with authorisation number EU-0019228-0000.
The Union authorisation is valid from 3 April 2019 until 31 March 2029.
The Union authorisation is subject to compliance with the summary of the biocidal product characteristics set out in the Annex.
Article 2 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 13 March 2019.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX
Summary of product characteristics for a biocidal product family
Deosan Activate BPF based on Iodine
Product type 3 — Veterinary hygiene (Disinfectants)
Authorisation number: EU-0019228-0000
R4BP asset number: EU-0019228-0000

PART I
FIRST INFORMATION LEVEL
1. ADMINISTRATIVE INFORMATION 
 1.1. Family name 


Name Deosan Activate BPF based on Iodine
 1.2. Product type(s) 


Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 1.3. Authorisation holder 


Name and address of the authorisation holder Name Diversey Europe Operations B.V.
Address Maarssenbroeksedijk 2, 3542DN Utrecht, Netherlands
Authorisation number EU-0019228-0000
R4BP asset number EU-0019228-0000
Date of the authorisation 3 April 2019
Expiry date of the authorisation 31 March 2029
 1.4. Manufacturer(s) of the biocidal products 


Name of manufacturer Diversey Europe Operations B.V.
Address of manufacturer Maarssenbroeksedijk 2, 3542 DN Utrecht Netherlands
Location of manufacturing sites Strada Statale 235, 26010 Bagnolo Cremasco (CR) ItalyAvenida Conde Duque 5, 7 y 9 Poligono Industrial La Postura, 28343 Valdemoro (Madrid) SpainRembrandtlaan 414, 7545 ZW Enschede NetherlandsCotes Park Industrial Estate, DE55 4PA Somercotes Alfreton United KingdomMorschheimer Strasse 12, 67292 Kirchheimbolanden Germany
 1.5. Manufacturer(s) of the active substance(s) 


Active substance Iodine
Name of manufacturer ACF Minera S.A.
Address of manufacturer San Martin No 499, 1100000 Iquique Chile
Location of manufacturing sites Lagunas mine, 118 0000 Pozo Almonte Chile


Active substance Iodine
Name of manufacturer Sociedad Quimica y Minera (SQM) S.A.
Address of manufacturer Los Militares 4290, Piso 4, Las Condes, 8320000 Santiago Chile
Location of manufacturing sites Nueva Victoria plant, 5090000 Pedro de Valdivia plant Chile


Active substance Iodine
Name of manufacturer Cosayach Nitratos S.A.
Address of manufacturer Hnos Amunátegui 178, 8320000 Santiago Chile
Location of manufacturing sites S.C.M. Cosayach Cala Cala, 118 0000 Pozo Almonte Chile


Active substance Iodine
Name of manufacturer Nihon Tennen Gas Development Co., Ltd
Address of manufacturer Chiba Plant, 2508 Minami-Hinata, Shirako-Machi, Chosei-Gun, 299-4205 Chiba Japan
Location of manufacturing sites Chiba Plant, 2508 Minami-Hinata, Shirako-Machi, Chosei-Gun, 299-4205 Chiba Japan


Active substance Iodine
Name of manufacturer ISE Chemicals Corporation
Address of manufacturer 3-1, Kyobashi 1-Chome, 104-0031 Tokyo Japan
Location of manufacturing sites Shirasto Plant (3695 Kitaimaizumi, Oamishirasato City, 299-3201 Chiba Japan


Active substance Iodine
Name of manufacturer Atacama Minerals SCM
Address of manufacturer Coronel Pereira No 72 Of. 701, Las Condes, 8320000 Santiago Chile
Location of manufacturing sites Atacama Minerals SCM, Aguas Blancas Facility, 3580000 Antofagasta Chile

2. PRODUCT FAMILY COMPOSITION AND FORMULATION 
 2.1. Qualitative and quantitative information on the composition of the family 


Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,3 1,6
 2.2. Type(s) of formulation 


Formulation(s) AL — Any other liquidSL — Soluble concentrateGW — Water soluble gel

PART II
SECOND INFORMATION LEVEL — META SPC(S)META SPC 1 
 1. META SPC 1 ADMINISTRATIVE INFORMATION 
 1.1. Meta SPC 1 identifier 


Identifier Meta SPC 1 — Deosan Activate BPF — Concentrate
 1.2. Suffix to the authorisation number 


Number 1-1
 1.3. Product type(s) 


Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2. META SPC 1 COMPOSITION 
 2.1. Qualitative and quantitative information on the composition of the meta SPC 1 


Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 1,35 1,6
 2.2. Type(s) of formulation of the meta SPC 1 


Formulation(s) SL — Soluble concentrate
 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1 


Hazard statements Harmful to aquatic life with long lasting effects.
Precautionary statements If medical advice is needed, have product container or label at hand.Keep out of reach of children.Avoid release to the environment.Dispose of contents to in accordance with national regulations.Dispose of container to in accordance with national regulations.
 4. AUTHORISED USE(S) OF THE META SPC 1 
 4.1. Use description 



Table 1. Use # 1 – Pre-milking disinfection, manual dipping (concentrate)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual dippingTeat disinfectant, for direct application to lactating animals pre milking.Applied directly to animal teats pre milking via manual dipping method
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration.For products with another concentration this instruction should be adapted.3 pre milking applications, per animal, per dayApply a maximum of 10 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.1.1. 
Use-specific instructions for use 

For products containing 1,5 % iodine this can be: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration. For products with another concentration this instruction should be adapted.

Apply directly to animal teats pre-milking via manual dipping method.

3 pre-milking applications, per animal, per day

Apply a maximum of 10 ml product/animal/application
 4.1.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.1.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.1.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.1.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.2. Use description 



Table 2. Use # 2 – Pre-milking disinfection, manual foaming (concentrate)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual foamingTeat disinfectant, for direct application to lactating animals pre milkingApplied directly to animal teats pre milking via manual foaming method
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration.For products with another concentration this instruction should be adapted.3 pre milking applications, per animal, per dayApply a maximum of 5 ml/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.2.1. 
Use-specific instructions for use 

For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration. For products with another concentration this instruction should be adapted.

Apply directly to animal teats pre-milking via manual foaming application method.

3 pre-milking applications, per animal, per day

Apply a maximum of 5 ml product/animal/application
 4.2.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.2.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.2.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.2.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.3. Use description 



Table 3. Use # 3 – Pre-milking disinfection, manual spraying (concentrate)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual sprayingTeat disinfectant, for direct application to lactating animals pre milkingApplied directly to animal teats pre milking via manual spraying method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –For products containing 1,5 % iodine Dilute1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration.For products with another concentration this instruction should be adapted.3 pre milking applications, per animal, per dayApply a maximum of 15 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.3.1. 
Use-specific instructions for use 

For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration. For products with another concentration this instruction should be adapted.

Apply directly to animal teats pre-milking via manual spraying application method.

3 pre-milking applications, per animal, per day

Apply a maximum of 15 ml product/animal/application
 4.3.2. 
Use-specific risk mitigation measures 

Wear protective chemical resistant gloves during product handling phase (glove material to be specified by the authorisation holder within the product information)
 4.3.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.3.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.3.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.4. Use description 



Table 4. Use # 4 – Post-milking disinfection, manual dipping (concentrate)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual dippingTeat disinfectant, for direct application to lactating animals post milkingApplied directly to animal teats post milking via manual dipping method.
Application rate(s) and frequency In use Iodine concentration of 3 000 mg/Kg (0,3 % w/w) –For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration.For products with another concentration this instruction should be adapted.3 post milking applications, per animal, per dayApply a maximum of 10 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.4.1. 
Use-specific instructions for use 

Applied directly to animal teats post milking via manual dipping method.

For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration. For products with another concentration this instruction should be adapted.

3 post milking applications, per animal, per day (5 applications in total)

Apply a maximum of 10 ml product/animal/application
 4.4.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.4.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.4.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.4.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.5. Use description 



Table 5. Use # 5 – Post-milking disinfection, manual foaming (concentrate)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual foamingTeat disinfectant, for direct application to lactating animals post milkingApplied directly to animal teats post milking via manual foaming method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration.For products with another concentration this instruction should be adapted.3 post milking applications, per animal, per dayApply a maximum of 5 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.5.1. 
Use-specific instructions for use 

Applied directly to animal teats post milking via manual foaming method.

For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration. For products with another concentration this instruction should be adapted.

3 post milking applications, per animal, per day

Apply a maximum of 5 ml product/animal/application
 4.5.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.5.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.5.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.5.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.6. Use description 



Table 6. Use # 6 – Post-milking disinfection, manual spraying (concentrate)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual sprayingTeat disinfectant, for direct application to lactating animals post milkingApplied directly to animal teats post milking via manual spraying method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration.For products with another concentration this instruction should be adapted.3 post milking applications, per animal, per dayApply a maximum of 15 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.6.1. 
Use-specific instructions for use 

Applied directly to animal teats post milking via manual spraying method.

For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration. For products with another concentration this instruction should be adapted.

3 post milking applications, per animal, per day

Apply a maximum of 15 ml product/animal/application
 4.6.2. 
Use-specific risk mitigation measures 

Wear protective chemical resistant gloves during product handling phase (glove material to be specified by the authorisation holder within the product information)
 4.6.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.6.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.6.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.7. Use description 



Table 7. Use # 7 – Post-milking disinfection, automatic spraying (concentrate)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Automatic sprayingTeat disinfectant, for direct application to lactating animals post milkingApplied directly to animal teats post milking via automatic spraying method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration.For products with another concentration this instruction should be adapted.5 post milking applications, per animal, per day. Not to be combined with pre-milking disinfection.Apply a maximum of 15 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.7.1. 
Use-specific instructions for use 

Applied directly to animal teats post milking via automatic spraying method.

For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration. For products with another concentration this instruction should be adapted.

5 post milking applications, per animal, per day. Not to be combined with Iodine based pre-milking disinfection.

Apply a maximum of 15 ml product/animal/application
 4.7.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.7.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.7.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.7.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.8. Use description 



Table 8. Use # 8 – Post-milking disinfection, semi-automatic dipping (concentrate)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Semi-automatic dippingTeat disinfectant, for direct application to lactating animals post milkingApplied directly to animal teats post milking via semi-automatic dipping method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration.For products with another concentration this instruction should be adapted.3 post-milking applications, per animal, per dayApply a maximum of 10 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 & 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.8.1. 
Use-specific instructions for use 

Applied directly to animal teats post milking via semi-automatic dipping method.

For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration. For products with another concentration this instruction should be adapted.

3 post milking applications, per animal, per day

Apply a maximum of 10 ml product/animal/application
 4.8.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.8.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.8.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.8.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.9. Use description 



Table 9. Use # 9 – Pre and post-milking disinfection, manual dipping (concentrate)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual dippingTeat disinfectant, for direct application to lactating animals pre and post milkingApplied directly to animal teats pre and post milking via manual dipping method
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration.For products with another concentration this instruction should be adapted.3 pre and 3 post milking applications, per animal, per day (up to 5 applications in total)Apply a maximum of 10 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.9.1. 
Use-specific instructions for use 

For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration. For products with another concentration this instruction should be adapted.

Apply directly to animal teats pre and post milking via manual dipping method.

3 pre and 3 post milking applications, per animal, per day (up to 5 applications in total)

Apply a maximum of 10 ml product/animal/application
 4.9.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.9.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.9.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.9.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.10. Use description 



Table 10. Use # 10 – Pre and post-milking disinfection, manual foaming (concentrate)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual foamingTeat disinfectant, for direct application to lactating animals pre and post milkingApplied directly to animal teats pre and post milking via manual foaming method
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration.For products with another concentration this instruction should be adapted.3 pre and 3 post milking applications, per animal, per day (up to 5 applications in total)Apply a maximum of 5 ml/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.10.1. 
Use-specific instructions for use 

For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration. For products with another concentration this instruction should be adapted.

Apply directly to animal teats pre and post milking via manual foaming application method.

3 pre and 3 post milking applications, per animal, per day (up to 5 applications in total)

Apply a maximum of 5 ml product/animal/application
 4.10.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.10.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.10.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.10.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.11. Use description 



Table 11. Use # 11 – Pre and post-milking disinfection, manual spraying (concentrate)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual sprayingTeat disinfectant, for direct application to lactating animals pre and post milkingApplied directly to animal teats pre and post milking via manual spraying method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration.For products with another concentration this instruction should be adapted.3 pre and 3 post milking applications, per animal, per day (up to 5 applications in total)Apply a maximum of 15 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.11.1. 
Use-specific instructions for use 

For products containing 1,5 % iodine: Dilute 1 part of product to 4 parts water to achieve 0,3 % in use iodine concentration. For products with another concentration this instruction should be adapted.

Apply directly to animal teats pre and post milking via manual spraying application method.

3 pre and 3 post milking applications, per animal, per day (up to 5 applications in total)

Apply a maximum of 15 ml product/animal/application
 4.11.2. 
Use-specific risk mitigation measures 

Wear protective chemical resistant gloves during product handling phase (glove material to be specified by the authorisation holder within the product information)

Wear suitable protective footwear (EN 13832) when applying the product.

A protective coverall (at least type 6, EN 13034) shall be worn
 4.11.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.11.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.11.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 1 
 5.1. Instructions for use 

The product must be brought to temperature > 20 °C before use


 Pre milking:
 Apply product to full length of each teat.
 For effective use against bacteria and yeast, product must be left in contact with the skin for at least 30 seconds.
 After the appropriate contact time, thoroughly remove the product, using a single service paper towel/cloth to ensure teats are clean and dry.
 In use iodine concentration of 3 000 mg/Kg (0,3 % w/w)
 Post milking:
 Cover the full length of each teat with the product, immediately after milking.
 To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes)
 In use iodine concentration of 3 000 mg/Kg (0,3 % w/w)
 5.2. Risk mitigation measures 

This product can be used for pre- and post-milking disinfection in combination (up to 5 applications in total per animal per day). However, it should not be used in combination with a different iodine-based product.

The use of a dosing pump for filling the product into the application equipment is recommended.
 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

Inhalation: No known effects or symptoms in normal use.

Skin contact: No known effects or symptoms in normal use.

Eye contact: No known effects or symptoms in normal use.

Ingestion: No known effects or symptoms in normal use

After inhalation: Supply fresh air; consult doctor in case of symptoms.

After skin contact: Instantly wash with water and soap and rinse thoroughly.

After eye contact: Rinse opened eye for several minutes under running water (at least 15 minutes).

After swallowing: Rinse out mouth and then drink plenty of water. Instantly call for doctor.

If medical advice is needed, have product container or label at hand

Stability and reactivity:


 Reactivity: No reactivity hazards known under normal storage and use conditions.
 Chemical stability: Stable under normal storage and use conditions.
 Possibility of hazardous reactions: No hazardous reactions known under normal storage and use conditions.
 Conditions to avoid: None known under normal storage and use conditions.
 Hazardous decomposition products: None known under normal storage and use conditions.

Environmental precautions:


 Dike to collect larger liquid spills.
 Contain and/or absorb spill with inert material, then place in suitable container.
 Prevent run-off from entering drains, sewers or waterways.
 Collect in closed and suitable containers for disposal.
 Do not place spilled materials back into the original container.
 5.4. Instructions for safe disposal of the product and its packaging 

Empty containers must be tripled rinsed prior to disposal

Paper towels used to dry animal teats and remove the product from them should be disposed of as normal/domestic waste.

Do not discharge undiluted product to sewers.
 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage 

Store only in original, closed container

Protect from frost

Do not store at temperatures above 40 °C

Shelf life 24 months
 6. OTHER INFORMATION 

None
 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1 
 7.1. Trade name(s), authorisation number and specific composition of each individual product 


Trade name(s) Deosan Activate Pre AG106Deosan Activate Pre
Authorisation number EU-0019228-0001 1-1
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 1,5
 7.2. Trade name(s), authorisation number and specific composition of each individual product 


Trade name(s) Deosan Activate Pre/Post Conc. AG218Deosan Activate Pre/Post Conc.Deosan Hitech concentrateDeosan Activate Pre/Post Plus Conc. AG218Deosan Activate Pre/Post Plus Conc.Iodine Concentrate
Authorisation number EU-0019228-0002 1-1
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 1,5
META SPC 2 
 1. META SPC 2 ADMINISTRATIVE INFORMATION 
 1.1. Meta SPC 2 identifier 


Identifier Meta SPC 2 — Deosan Activate BPF – RTU liquid
 1.2. Suffix to the authorisation number 


Number 1-2
 1.3. Product type(s) 


Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2. META SPC 2 COMPOSITION 
 2.1. Qualitative and quantitative information on the composition of the meta SPC 2 


Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,3 0,32
 2.2. Type(s) of formulation of the meta SPC 2 


Formulation(s) AL — Any other liquid
 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2 


Hazard statements Harmful to aquatic life with long lasting effects.
Precautionary statements If medical advice is needed, have product container or label at hand.Keep out of reach of children.Avoid release to the environment.Dispose of contents to in accordance with national regulations.Dispose of container to in accordance with national regulations.
 4. AUTHORISED USE(S) OF THE META SPC 2 
 4.1. Use description 



Table 12. Use # 1 – Pre-milking disinfection, manual dipping (RTU liquid)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual dippingTeat disinfectant, for direct application to lactating animals pre milkingApplied directly to animal teats pre-milking via manual dipping methods
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.3 pre-milking applications, per animal, per day.Apply a maximum of 10 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.1.1. 
Use-specific instructions for use 

Applied directly to animal teats pre-milking via manual dipping methods.

Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.

3 pre-milking applications, per animal, per day.

Apply a maximum of 10 ml product/animal/application
 4.1.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.1.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.1.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.1.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.2. Use description 



Table 13. Use # 2 – Pre-milking disinfection, manual foaming (RTU liquid)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual foamingTeat disinfectant, for direct application to lactating animals pre milkingApplied directly to animal teats pre-milking via manual foaming method.
Application rate(s) and frequency In use Iodine concentration of 3 000 mg/Kg (0,3 % w/w) –Ready to use formulation containing 0,3 % w/w Iodine. Do not dilute before use.3 pre milking applications, per animal, per day.Apply a maximum of 5 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 & 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.2.1. 
Use-specific instructions for use 

Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.

Apply directly to animal teats pre-milking via manual foaming application method.

3 pre-milking applications, per animal, per day.

Apply a maximum of 5 ml product/animal/application
 4.2.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.2.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.2.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.2.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.3. Use description 



Table 14. Use # 3 – Pre-milking disinfection, manual spraying (RTU liquid)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual sprayingTeat disinfectant, for direct application to lactating animals pre milkingApplied directly to animal teats pre-milking via manual spraying method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –Ready to use formulation containing 0,3 % w/w Iodine. Do not dilute before use.3 pre milking applications, per animal, per day.Apply a maximum of 15 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.3.1. 
Use-specific instructions for use 

Applied directly to animal teats pre-milking via manual spraying method.

Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.

3 pre-milking applications, per animal, per day.

Apply a maximum of 15 ml product/animal/application
 4.3.2. 
Use-specific risk mitigation measures 

Wear protective chemical resistant gloves during product handling phase (glove material to be specified by the authorisation holder within the product information)
 4.3.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.3.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.3.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.4. Use description 



Table 15. Use # 4 – Post-milking disinfection, manual dipping (RTU liquid)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual dippingTeat disinfectant, for direct application to lactating animals post milkingApplied directly to animal teats post milking via manual dipping method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.3 post milking applications, per animal, per day.Apply a maximum of 10 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.4.1. 
Use-specific instructions for use 

Applied directly to animal teats post milking via manual dipping method.

Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.

3 post milking applications, per animal, per day.

Apply a maximum of 10 ml product/animal/application
 4.4.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.4.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.4.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.4.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.5. Use description 



Table 16. Use # 5 – Post-milking disinfection, manual foaming (RTU liquid)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual foamingTeat disinfectant, for direct application to lactating animals post milkingApplied directly to animal teats post milking via manual foaming method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.3 post milking applications, per animal, per day.Apply a maximum of 5 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 & 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.5.1. 
Use-specific instructions for use 

Applied directly to animal teats post milking via manual foaming method.)

Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.

3 post milking applications, per animal, per day.

Apply a maximum of 5 ml product/animal/application
 4.5.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.5.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.5.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.5.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.6. Use description 



Table 17. Use # 6 – Post-milking disinfection, manual spraying (RTU liquid)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual sprayingTeat disinfectant, for direct application to lactating animals post milkingApplied directly to animal teats post milking via manual spraying method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.3 post milking applications, per animal, per day.Apply a maximum of 15 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.6.1. 
Use-specific instructions for use 

Applied directly to animal teats post milking via manual spraying method.

Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.

3 post milking applications, per animal, per day.

Apply a maximum of 15 ml product/animal/application
 4.6.2. 
Use-specific risk mitigation measures 

Wear protective chemical resistant gloves during product handling phase (glove material to be specified by the authorisation holder within the product information)
 4.6.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.6.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.6.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.7. Use description 



Table 18. Use # 7 – Post-milking disinfection, automatic spraying (not to be combined with a pre-milking disinfection (RTU liquid)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Automatic sprayingTeat disinfectant, for direct application to lactating animals post milkingApplied directly to animal teats post milking via automatic spraying method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.5 post milking applications, per animal, per day. Not to be combined with iodine based pre-milking disinfection.Apply a maximum of 15 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.7.1. 
Use-specific instructions for use 

Applied directly to animal teats post milking via automatic spraying method.

Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.

5 post milking applications, per animal, per day. Not to be combined with iodine based pre-milking disinfection.

Apply a maximum of 15 ml product/animal/application
 4.7.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.7.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.7.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.7.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.8. Use description 



Table 19. Use # 8 – Post-milking disinfection, semi-automatic dipping (RTU liquid)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Semi-automatic dippingTeat disinfectant, for direct application to lactating animals post milkingApplied directly to animal teats post milking via semi-automatic dipping method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.3 post milking applications per animal, per day.Apply a maximum of 10 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.8.1. 
Use-specific instructions for use 

Applied directly to animal teats post milking via semi-automatic dipping method.

Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.

3 post milking applications, per animal, per day.

Apply a maximum of 10 ml product/animal/application
 4.8.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.8.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.8.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.8.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.9. Use description 



Table 20. Use # 9 – Pre and post milking disinfection, manual dipping (RTU liquid)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual dippingTeat disinfectant, for direct application to lactating animals pre and post milkingApplied directly to animal teats pre and post milking via manual dipping methods
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.3 pre and 3 post milking applications, per animal, per day (up to 5 applications in total).Apply a maximum of 10 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.9.1. 
Use-specific instructions for use 

Applied directly to animal teats pre-milking via manual dipping methods.

Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.

3 pre and 3 post milking applications, per animal, per day (up to 5 applications in total).

Apply a maximum of 10 ml product/animal/application
 4.9.2. 
Use-specific risk mitigation measures 

Wear protective chemical resistant gloves during product handling phase (glove material to be specified by the authorisation holder within the product information)
 4.9.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.9.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.9.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.10. Use description 



Table 21. Use # 10 – Pre and post milking disinfection, manual foaming (RTU liquid)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual foamingTeat disinfectant, for direct application to lactating animals pre and post milkingApplied directly to animal teats pre and post milking via manual foaming method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.3 pre and 3 post milking applications, per animal, per day (up to 5 applications in total).Apply a maximum of 5 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 & 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.10.1. 
Use-specific instructions for use 

Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.

Apply directly to animal teats pre and post milking via manual foaming application method.

3 pre and 3 post milking applications, per animal, per day (up to 5 applications in total).

Apply a maximum of 5 ml product/animal/application
 4.10.2. 
Use-specific risk mitigation measures 

Wear protective chemical resistant gloves during product handling phase (glove material to be specified by the authorisation holder within the product information)
 4.10.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.10.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.10.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.11. Use description 



Table 22. Use # 11 – Pre and post milking disinfection, manual spraying (RTU liquid)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual sprayingTeat disinfectant, for direct application to lactating animals pre and post milkingApplied directly to animal teats pre and post milking via manual spraying method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.3 pre and 3 post milking applications, per animal, per day (up to 5 applications in total).Apply a maximum of 15 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.11.1. 
Use-specific instructions for use 

Applied directly to animal teats pre and post milking via manual spraying method.

Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.

3 pre and 3 post milking applications, per animal, per day (up to 5 applications in total).

Apply a maximum of 15 ml product/animal/application
 4.11.2. 
Use-specific risk mitigation measures 

Wear protective chemical resistant gloves during product handling phase (glove material to be specified by the authorisation holder within the product information

Wear suitable protective footwear (EN 13832) when applying the product.

A protective coverall (at least type 6, EN 13034) shall be worn
 4.11.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.11.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.11.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 2 
 5.1. Instructions for use 

The product must be brought to temperature > 20 °C before use


 Pre milking:
 Apply product to full length of each teat.
 For effective use against bacteria and yeast, product must be left in contact with the skin for at least 30 seconds.
 After the appropriate contact time, thoroughly remove the product, using a single service paper towel/cloth to ensure teats are clean and dry.
 In use iodine concentration of 3 000 mg/Kg (0,3 % w/w)
 Post milking:
 Cover the full length of each teat with the product, immediately after milking.
 To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes)
 In use iodine concentration of 3 000 mg/Kg (0,3 % w/w)
 5.2. Risk mitigation measures 

This product can be used for pre- and post-milking disinfection in combination (up to 5 applications in total per animal per day). However, it should not be used in combination with a different iodine-based product

The use of a dosing pump for filling the product into the application equipment is recommended.
 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

Inhalation: No known effects or symptoms in normal use.

Skin contact: No known effects or symptoms in normal use.

Eye contact: No known effects or symptoms in normal use.

Ingestion: No known effects or symptoms in normal use

After inhalation: Supply fresh air; consult doctor in case of symptoms.

After skin contact: Instantly wash with water and soap and rinse thoroughly.

After eye contact: Rinse opened eye for several minutes under running water (at least 15 minutes).

After swallowing: Rinse out mouth and then drink plenty of water. Instantly call for doctor.

If medical advice is needed, have product container or label at hand

Stability and reactivity:


 Reactivity: No reactivity hazards known under normal storage and use conditions.
 Chemical stability: Stable under normal storage and use conditions.
 Possibility of hazardous reactions: No hazardous reactions known under normal storage and use conditions.
 Conditions to avoid: None known under normal storage and use conditions.
 Hazardous decomposition products: None known under normal storage and use conditions.

Environmental precautions:


 Dike to collect larger liquid spills.
 Contain and/or absorb spill with inert material, then place in suitable container.
 Prevent run-off from entering drains, sewers or waterways.
 Collect in closed and suitable containers for disposal.
 Do not place spilled materials back into the original container.
 5.4. Instructions for safe disposal of the product and its packaging 

Empty containers must be tripled rinsed prior to disposal

Paper towels used to dry animal teats and remove the product from them should be disposed of as normal/domestic waste.

Do not discharge undiluted product to sewers.
 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage 

Store only in original, closed container

Protect from frost

Do not store at temperatures above 30 °C

Shelf life 24 months
 6. OTHER INFORMATION 

None
 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2 
 7.1. Trade name(s), authorisation number and specific composition of each individual product 


Trade name(s) Deosan Activate Pre RTU AG108Deosan Activate Pre RTU
Authorisation number EU-0019228-0003 1-2
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,3
 7.2. Trade name(s), authorisation number and specific composition of each individual product 


Trade name(s) Deosan Activate Pre/Post AG217Deosan Activate Pre/PostIodine Plus Pre & PostDeosan D4T Super AG211Agros IodoAgros Iodo MultiPoviclyn liquido
Authorisation number EU-0019228-0004 1-2
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,3
 7.3. Trade name(s), authorisation number and specific composition of each individual product 


Trade name(s) Deosan Activate PVP Plus AG215Deosan Activate PVP PlusAgros Iodo-Prev POS-OrdenhaDeosan Hitech 2 AG214Iodine Teat Dip Solution
Authorisation number EU-0019228-0005 1-2
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,3
META SPC 3 
 1. META SPC 3 ADMINISTRATIVE INFORMATION 
 1.1. Meta SPC 3 identifier 


Identifier Meta SPC 3 — Deosan Activate BPF – RTU gel
 1.2. Suffix to the authorisation number 


Number 1-3
 1.3. Product type(s) 


Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2. META SPC 3 COMPOSITION 
 2.1. Qualitative and quantitative information on the composition of the meta SPC 3 


Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,3 0,32
 2.2. Type(s) of formulation of the meta SPC 3 


Formulation(s) GW — Water soluble gel
 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3 


Hazard statements Harmful to aquatic life with long lasting effects.
Precautionary statements If medical advice is needed, have product container or label at hand.Keep out of reach of children.Avoid release to the environment.Dispose of contents to in accordance with national regulations.Dispose of container to in accordance with national regulations.
 4. AUTHORISED USE(S) OF THE META SPC 3 
 4.1. Use description 



Table 23. Use # 1 – Pre-milking disinfection, manual dipping (RTU gel)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual dippingTeat disinfectant, for direct application to lactating animals pre milkingApplied directly to animal teats pre- milking via manual dipping application method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.3 pre milking applications, per animal, per day.Apply a maximum of 10 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.1.1. 
Use-specific instructions for use 

Applied directly to animal teats pre- milking via manual dipping application method.

Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.

3 pre milking applications, per animal, per day.

Apply a maximum of 10 ml product/animal/application
 4.1.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.1.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.1.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.1.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.2. Use description 



Table 24. Use # 2 – Post-milking disinfection, manual dipping (RTU gel)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual dippingTeat disinfectant, for direct application to lactating animals post milkingApplied directly to animal teats post milking via manual dipping method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.3 post milking applications, per animal, per day.apply a maximum of 10 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.2.1. 
Use-specific instructions for use 

Applied directly to animal teats post milking via manual dipping method.

Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.

2-3 post milking applications, per animal, per day.

Apply a maximum of 10 ml product/animal/application
 4.2.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.2.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.2.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.2.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.3. Use description 



Table 25. Use # 3 – Post-milking disinfection, semi-automatic dipping (RTU gel)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Semi-automatic dippingTeat disinfectant, for direct application to lactating animals post milkingApplied directly to animal teats post milking via semi-automatic dipping method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.3 post milking applications, per animal per day.Apply a maximum of 10 ml product/animal/application.
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.3.1. 
Use-specific instructions for use 

Applied directly to animal teats post milking via semi-automatic dipping method.

Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.

3 post milking applications, per animal, per day.

Apply a maximum of 10 ml product/animal/application
 4.3.2. 
Use-specific risk mitigation measures 

See section 5 — General Directions for Use
 4.3.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.3.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use
 4.3.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 4.4. Use description 



Table 26. Use # 4 – Pre and post-milking disinfection, manual dipping (RTU gel)Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Manual dippingTeat disinfectant, for direct application to lactating animals pre and post milkingApplied directly to animal teats pre and post milking via manual dipping application method.
Application rate(s) and frequency In use iodine concentration of 3 000 mg/Kg (0,3 % w/w) –Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.3 pre and 3 post milking applications, per animal, per day (up to 5 applications in total)Apply a maximum of 10 ml product/animal/application
Category(ies) of users Professional
Pack sizes and packaging material 1, 5 and 20 litre HDPE or f-HDPE canister200 litre HDPE or f-HDPE drum950 litre HDPE or f-HPDE Intermediate Bulk Container (IBC)
 4.4.1. 
Use-specific instructions for use 

Applied directly to animal teats pre and post milking via manual dipping application method.

Ready to use formulation containing 0,3 % w/w iodine. Do not dilute before use.

3 pre and 3 post milking applications, per animal, per day (up to 5 applications in total)

Apply a maximum of 10 ml product/animal/application
 4.4.2. 
Use-specific risk mitigation measures 

Wear protective chemical resistant gloves when applying the product by dipping (glove material to be specified by the authorisation holder within the product information)
 4.4.3. 
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

See section 5 — General Directions for Use
 4.4.4. 
Where specific to the use, the instructions for safe disposal of the product and its packaging 

See section 5 — General Directions for Use.
 4.4.5. 
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage 

See section 5 — General Directions for Use
 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 3 
 5.1. Instructions for use 

The product must be brought to temperature > 20 °C before use


 Pre milking:
 Apply product to full length of each teat.
 For effective use against bacteria and yeast, product must be left in contact with the skin for at least 30 seconds.
 After the appropriate contact time, thoroughly remove the product, using a single service paper towel/cloth to ensure teats are clean and dry.
 In use iodine concentration of 3 000 mg/Kg (0,3 % w/w)
 Post milking:
 Cover the full length of each teat with the product, immediately after milking.
 To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes)
 In use iodine concentration of 3 000 mg/Kg (0,3 % w/w)
 5.2. Risk mitigation measures 

This product can be used for pre- and post-milking disinfection in combination (up to 5 applications in total per animal per day). However, it should not be used in combination with a different iodine-based product

The use of a dosing pump for filling the product into the application equipment is recommended.
 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment 

Inhalation: No known effects or symptoms in normal use.

Skin contact: No known effects or symptoms in normal use.

Eye contact: No known effects or symptoms in normal use.

Ingestion: No known effects or symptoms in normal use

After inhalation: Supply fresh air; consult doctor in case of symptoms.

After skin contact: Instantly wash with water and soap and rinse thoroughly.

After eye contact: Rinse opened eye for several minutes under running water (at least 15 minutes).

After swallowing: Rinse out mouth and then drink plenty of water. Instantly call for doctor.

If medical advice is needed, have product container or label at hand

Stability and reactivity:


 Reactivity: No reactivity hazards known under normal storage and use conditions.
 Chemical stability: Stable under normal storage and use conditions.
 Possibility of hazardous reactions: No hazardous reactions known under normal storage and use conditions.
 Conditions to avoid: None known under normal storage and use conditions.
 Hazardous decomposition products: None known under normal storage and use conditions.

Environmental precautions:


 Dike to collect larger liquid spills.
 Contain and/or absorb spill with inert material, then place in suitable container.
 Prevent run-off from entering drains, sewers or waterways.
 Collect in closed and suitable containers for disposal.
 Do not place spilled materials back into the original container.
 5.4. Instructions for safe disposal of the product and its packaging 

Empty containers must be tripled rinsed prior to disposal

Paper towels used to dry animal teats and remove the product from them should be disposed of as normal/domestic waste.

Do not discharge undiluted product to sewers.
 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage 

Store only in original, closed container

Protect from frost

Do not store at temperatures above 30 °C

Shelf life 18 months
 6. OTHER INFORMATION 

None
 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 3 
 7.1. Trade name(s), authorisation number and specific composition of each individual product 


Trade name(s) Deosan Activate Barrier AG216Agros Iodo PósPovisyl espeso
Authorisation number EU-0019228-0006 1-3
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,3
