
COMMISSION IMPLEMENTING DECISION (EU) 2019/919 of 4 June 2019 on the harmonised standards for recreational craft and personal watercraft drafted in support of Directive 2013/53/EU of the European Parliament and of the Council 

THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council, and in particular Article 10(6) thereof,
Whereas:

(1) In accordance with Article 14 of Directive 2013/53/EU of the European Parliament and of the Council, products which are in conformity with harmonised standards or parts thereof the references of which have been published in the Official Journal of the European Union, are presumed to be in conformity with the requirements covered by those standards or parts thereof set out in Article 4(1) of Directive 2013/53/EU and Annex I to that Directive.

(2) By Commission Implementing Decision C(2015) 8736, the Commission made a request to CEN/Cenelec for drafting, revision and completion of the work on harmonised standards in support of Directive 2013/53/EU addressing stricter essential requirements set out in Article 4(1) of Directive 2013/53/EU and Annex I to that Directive in comparison with the repealed Directive 94/25/EC of the European Parliament and of the Council.

(3) Specifically, CEN/Cenelec were requested to adopt new standards for electrical systems, protection from falling overboard, discharge prevention, builder's plate, owner's manual, visibility from main steering position, buoyancy and escape means of multihulls, gas systems, exhaust emissions and watercraft identification and to revise existing standards and draft standards under development.

(4) On the basis of the request set out in Implementing Decision C(2015) 8736, CEN/Cenelec revised several harmonised standards for small craft and inflatable boats.

(5) CEN/Cenelec revised the Annexes of harmonised standards to quote the full title of Directive 2013/53/EU as well as to indicate in a clear and detailed manner the correlation between the clauses of standards and relevant essential requirements.

(6) On the basis of the request set out in Implementing Decision C(2015) 8736 CEN/Cenelec drafted standard EN ISO 8666:2018. The standard is the reference standard in terms of principal boat dimensions and related data as well as mass specifications and various loading conditions. That standard provides technical specifications in relation to definition of hull length set out in Article 3(10) of the Directive 2013/53/EU.

(7) The Commission together with CEN/Cenelec has assessed whether the standards for small craft and inflatable boats drafted by CEN/Cenelec comply with the request set out in Implementing Decision C(2015) 8736.

(8) The standards for small craft and inflatable boats satisfy the requirements, which they aim to cover and which are set out in Article 4(1) of Directive 2013/53/EU and Annex I to that Directive. It is therefore appropriate to publish the references of those standards in the Official Journal of the European Union.

(9) It is therefore necessary to withdraw the references to those standards that are replaced by the new standards drafted by CEN/Cenelec.

(10) Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force on the date of its publication,
HAS ADOPTED THIS DECISION:

Article 1 
The references to harmonised standards for recreational craft and personal watercraft drafted in support of Directive 2013/53/EU, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union.
Article 2 
The references to harmonised standards for recreational craft and personal watercraft drafted in support of Directive 2013/53/EU, listed in Annex II to this Decision, are hereby withdrawn from the Official Journal of the European Union.
Article 3 
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
ANNEX I

No Reference of the standard
1. EN ISO 6185-1:2018
 Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001)
2. EN ISO 6185-2:2018
 Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001)
3. EN ISO 6185-3:2018
 Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014)
4. EN ISO 6185-4:2018
 Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01)
5. EN ISO 7840:2018
 Small craft - Fire-resistant fuel hoses (ISO 7840:2013)
6. EN ISO 8469:2018
 Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013)
7. EN ISO 8666:2018
 Small craft - Principal data (ISO 8666:2016)
8. EN ISO 8849:2018
 Small craft - Electrically operated direct-current bilge pumps (ISO 8849:2003)
9. EN ISO 9093-1:2018
 Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994)
10. EN ISO 9093-2:2018
 Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002)
11. EN ISO 11192:2018
 Small craft - Graphical symbols (ISO 11192:2005)
12. EN ISO 11547:2018
 Small craft - Start-in-gear protection (ISO 11547:1994)
13. EN ISO 11812:2018
 Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001)
14. EN ISO 12215-1:2018
 Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000)
15. EN ISO 12215-2:2018
 Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002)
16. EN ISO 12215-3:2018
 Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002)
17. EN ISO 12215-4:2018
 Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002)
18. EN ISO 12215-5:2018
 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008, including Amd 1:2014)
19. EN ISO 12215-6:2018
 Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008)
20. EN ISO 12215-8:2018
 Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009, including Cor 1:2010)
21. EN ISO 12215-9:2018
 Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012)
22. EN ISO 12216:2018
 Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2002)
23. EN ISO 13297:2018
 Small craft - Electrical systems - Alternating current installations (ISO 13297:2014)
24. EN ISO 13590:2018
 Small craft - Personal watercraft - Construction and system installation requirements (ISO 13590:2003)
25. EN ISO 14509-1:2018
 Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures (ISO 14509-1:2008)
26. EN ISO 14509-3:2018
 Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009)
27. EN ISO 15083:2018
 Small craft - Bilge-pumping systems (ISO 15083:2003)
28. EN ISO 15084:2018
 Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003)
29. EN ISO 16180:2018
 Small craft - Navigation lights - Installation, placement and visibility (ISO 16180:2013)
30. EN ISO 21487:2018
 Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012, including Amd 1:2014 and Amd 2:2015)
31. EN ISO 25197:2018
 Small craft - Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012, including Amd 1:2014)
32. EN ISO 10087:2019
 Small craft - Craft identification - Coding system
33. EN ISO 12215-5:2019
 Small craft - Hull construction and scantlings, Part 5: Design pressures for monohulls, design stresses and scantlings determination
ANNEX II

No Reference of the standard
1. EN ISO 6185-1:2001
 Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001)
2. EN ISO 6185-2:2001
 Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001)
3. EN ISO 6185-3:2014
 Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014)
4. EN ISO 6185-4:2011
 Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01)
5. EN ISO 7840:2013
 Small craft - Fire-resistant fuel hoses (ISO 7840:2013)
6. EN ISO 8469:2013
 Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013)
7. EN ISO 8849:2003
 Small craft - Electrically operated direct-current bilge-pumps (ISO 8849:2003)
8. EN ISO 9093-1:1997
 Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994)
9. EN ISO 9093-2:2002
 Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002)
10. EN ISO 11192:2005
 Small craft - Graphical symbols (ISO 11192:2005)
11. EN ISO 11547:1995
 Small craft - Start-in-gear protection (ISO 11547:1994)
 EN ISO 11547:1995/A1:2000
12. EN ISO 11812:2001
 Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001)
13. EN ISO 12215-1:2000
 Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000)
14. EN ISO 12215-2:2002
 Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002)
15. EN ISO 12215-3:2002
 Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002)
16. EN ISO 12215-4:2002
 Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002)
17. EN ISO 12215-5:2008
 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008)
 EN ISO 12215-5:2008/A1:2014
18. EN ISO 12215-6:2008
 Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008)
19. EN ISO 12215-8:2009
 Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009)
 EN ISO 12215-8:2009/AC:2010
20. EN ISO 12215-9:2012
 Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012)
21. EN ISO 12216:2002
 Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2002)
22. EN ISO 13297:2014
 Small craft - Electrical systems - Alternating current installations (ISO 13297:2014)
23. EN ISO 13590:2003
 Small craft - Personal watercraft - Construction and system installation requirements (ISO 13590:2003)
 EN ISO 13590:2003/AC:2004
24. EN ISO 14509-1:2008
 Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures (ISO 14509-1:2008)
25. EN ISO 14509-3:2009
 Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009)
26. EN ISO 15083:2003
 Small craft - Bilge-pumping systems (ISO 15083:2003)
27. EN ISO 15084:2003
 Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003)
28. EN ISO 16180:2013
 Small craft - Navigation lights - Installation, placement and visibility (ISO 16180:2013)
29. EN ISO 21487:2012
 Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012)
 EN ISO 21487:2012/A1:2014
 EN ISO 21487:2012/A2:2015
30. EN ISO 25197:2012
 Small craft - Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012)
 EN ISO 25197:2012/A1:2014