
COMMISSION IMPLEMENTING DECISION (EU) 2019/1741 of 23 September 2019 establishing the format and frequency of data to be made available by the Member States for the purposes of reporting under Regulation (EC) No 166/2006 of the European Parliament and of the Council concerning the establishment of a European Pollutant Release and Transfer Register and amending Council Directives 91/689/EEC and 96/61/EC (notified under document C(2019) 6745) (Text with EEA relevance) 

THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 166/2006 of the European Parliament and of the Council of 18 January 2006 concerning the establishment of a European Pollutant Release and Transfer Register and amending Council Directives 91/689/EEC and 96/61/EC, and in particular Article 7(2) thereof,
Whereas:

((1)) In accordance with Article 7 of Regulation (EC) No 166/2006 (hereafter ‘the Regulation’), Member States report data to the Commission on pollutant releases and transfers from large industrial facilities. The Commission compiles these data in an electronic and publicly available European Pollutant Release and Transfer Register (hereafter ‘E-PRTR’) in order to facilitate public participation in environmental decision-making and the reduction of pollution of the environment.
((2)) In order to enhance coherence with reporting under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions whose format, frequency and content is established by Commission Implementing Decision (EU) 2018/1135, the Regulation was amended by Regulation (EU) 2019/1010 of the European Parliament and of the Council (hereafter ‘the Amendment’) to confer implementing powers on the Commission to establish the information to be made available under the Regulation, and to abolish the reporting format currently laid down in that Regulation.
((3)) The Amendment emphasised the over-riding importance of enabling Union citizens to quickly access environmental information and the necessity for Member States and the Commission to make data publicly available as fast as technically feasible. The Amendment also determined that Member State reporting should occur no later than 11 months after the year-end and set the aim of having information available within three months of the year-end, including by progressing towards this objective through an implementing act under the Regulation.
((4)) The current practices and information technology used for reporting aim at ensuring the high quality of data included in both national pollutant release and transfer registers and in the E-PRTR. The objective of making E-PRTR information available earlier to the public should further promote the reporting of high-quality information. Since this objective requires the implementation of a stepwise approach and careful preparation, including the testing of new reporting methods and the development of new reporting tools, notably for the purpose of validation and quality control of reported data, the reporting deadlines should be reviewed in light of progress in information technology, the results of pilot testing and Member State best practices.
((5)) The measures provided for in this Decision are in accordance with the opinion of the Committee established by Article 19 of the Regulation,
HAS ADOPTED THIS DECISION:

Article 1 
Appropriate authorities outside England and the competent authority in England must  provide the information set out in the Annex to the Secretary of the State in accordance with this Decision.
The information set out in the Annex shall be first submitted for the reporting year  2020, unless otherwise stated in that Annex.
The administrative information set out in Sections 1 to 4 of the Annex shall be submitted to the  Secretary of State, at the latest, by 30 September of the following reporting year.
The thematic information set out in Sections 5 to 10 of the Annex shall be submitted to the Secretary of State, at the latest, by 30 November of the following reporting year.
Article 2 
This Decision shall be reviewed by 31 December 2024, at the latest, with a view to assessing the feasibility of progressing towards the objective of earlier public availability of  United Kingdom-PRTR  data. This review shall include an exchange of information between the  appropriate authorities  on national best practices and available techniques and tools allowing earlier reporting.
Article 3  

(1) For the purpose of this Decision a reference to a provision of a Directive is to be read as a reference to that provision in so far as it has been transposed into the law of any part of the United Kingdom.
(2) In this Decision—
 “appropriate authority” means—
(a) in relation to England, the Secretary of State;
(b) in relation to Wales, the Welsh Ministers;
(c) in relation to Scotland, the Scottish Ministers;
(d) in relation to Northern Ireland, the Department of Agriculture, Environment and Rural Affairs;
 “competent authority” means the national authority or authorities, or any other competent body or bodies, designated by the appropriate authority.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Done at Brussels, 23 September 2019.
For the Commission
Karmenu VELLA
Member of the Commission
ANNEX
Establishing the format and frequency of data to be made available by the  appropriate authorities outside England or the competent authority in England  for the purposes of reporting under Regulation (EC) No 166/2006

Note:
The appropriate authorities outside England or the competent authority in England  may indicate information that they consider to be confidential, giving the grounds that are considered to preclude the  Secretary of State  from making it publicly available.

A. ADMINISTRATIVE INFORMATION
1. Reporter identification
Type Format
1.1. Country identifier Identification of the country where the reported facility is located.
1.2. Reporting year Calendar year to which the reporting refers.
2. Identification of the facility, 
Type Format
2.1. inspireId Unique identifier of the facility that follows the requirements of Directive 2007/2/EC of the European Parliament and of the Council 
2.2. thematicId  Thematic object identifier.
2.3. Emissions Trading Scheme identifier Where the installation is, fully or partly, covered by Directive 2003/87/EC of the European Parliament and of the Council, the identifier used for reporting under that Directive.
2.4. Name of the facility Official denomination, proper name or conventional name of the facility.
2.5. Name of the parent company A parent company is a company that owns or controls the company operating the facility (for example by holding more than 50 % of the company’s share capital or a majority of voting rights of the shareholders or associates) — see Directive 2013/34/EU of the European Parliament and of the Council .
2.6. Address Postal address of the facility as defined by building number, street, city/town, postal code, country.
2.7. Geometry Latitude and longitude (coordinates for the approximate centre of the facility) expressed with reference to the ETRS89 (2D)-EPSG:4258 coordinate reference system to a precision of 5 decimal places.
2.8. River Basin District Code identifier and/or name assigned to the basin district of a watercourse.
2.9. Function Activities performed by the facility. Function is described by the activities of the facility expressed as NACE-codes.
2.10. UK-PRTR Annex I activities Annex I activities carried out at the facility, indicating the main activity and all others.
2.11. Status The operational status of the facility.
2.12. Production volume,  
2.13. Number of operating hours in the year Optional.
2.14. Number of employees Optional.
2.15. Website address Website address of facility or parent company that shows the environmental report or the EMAS statement of the facility or the parent company.
2.16. Remarks Any other relevant information. Optional.
3. Information on the UK-PRTR competent authority for the facility
Type Format
3.1. Competent authority name 
3.2. Competent authority address Postal address as defined by building number, street, city/town, postal code, country.
3.3. Competent authority email 
3.4. Competent authority telephone number 
4. Information where the UK-PRTR facility is part of, or coincides with, a ‘Production site’
Type Format
4.1. inspireId Unique identifier of the production site that follows the requirements of Directive 2007/2/EC.
4.2. thematicId Thematic object identifier of the production site.
4.3. Geometry Latitude and longitude (coordinates for the approximate centre of the production site) expressed with reference to the ETRS89 (2D)-EPSG:4258 coordinate reference system to a precision of 5 decimal places.
4.4. Name of production site Official denomination, proper name or conventional name of the production site.
B. THEMATIC INFORMATION
5. Air release data — for each pollutant exceeding a threshold value in Annex IIof Regulation (EC) No 166/2006
Type Format
5.1. Pollutant name In accordance with Annex II of Regulation (EC) No 166/2006.
5.2. Total mass release Total mass per pollutant of all releases from all sources on the facility (kg/year).Quantification method used: Measured (indicating analytical method); Calculated (indicating method); Estimated.
5.3. Accidental mass release The part of the ‘total mass release’ deriving from accidents (kg/year).
6. Water release data — for each pollutant exceeding a threshold value in Annex IIof Regulation (EC) No 166/2006
Type Format
6.1. Pollutant name In accordance with Annex II of Regulation (EC) No 166/2006.
6.2. Total mass release Total mass per pollutant of all releases from all sources on the facility (kg/year).Quantification method used: Measured (indicating analytical method); Calculated (indicating method); Estimated.
6.3. Accidental mass release The part of the ‘total mass release’ deriving from accidents (kg/year).
7. Land release data — for each pollutant exceeding a threshold value in Annex IIof Regulation (EC) No 166/2006
Type Format
7.1. Pollutant name In accordance with Annex II of Regulation (EC) No 166/2006.
7.2. Total mass release Total mass per pollutant of all releases from all sources on the facility (kg/year).Quantification method used: Measured (indicating analytical method); Calculated (indicating method); Estimated.
7.3. Accidental mass release The part of the ‘total mass release’ deriving from accidents (kg/year).
8. Off-site transfer to waste-water treatment — for each pollutant exceeding a threshold valuein Annex II of Regulation (EC) No 166/2006
Type Format
8.1 Pollutant name In accordance with Annex II of Regulation (EC) No 166/2006.
8.2 Total mass transfer Total mass per pollutant of all transfers from the facility (kg/year).Quantification method used: Measured (indicating analytical method); Calculated (indicating method); Estimated.
9. Off-site transfers of hazardous waste — where exceeding the threshold value in Article 5(1) of Regulation (EC) No 166/2006
Type Format
9.1 Within the country for recovery (R) Total mass of transfer (tonnes/year).Quantification method used: Measured (indicating analytical method); Calculated (indicating method); Estimated.
9.2 Within the country for disposal (D) Total mass of transfer (tonnes/year).Quantification method used: Measured (indicating analytical method); Calculated (indicating method); Estimated.
9.3 To other countries for recovery (R) Total mass of transfer (tonnes/year).Quantification method used: Measured (indicating analytical method); Calculated (indicating method); Estimated.Name and address of the recoverer.Address of actual recovery site receiving the transfer.
9.4 To other countries for disposal (D) Total mass of transfer (tonnes/year).Quantification method used: Measured (indicating analytical method); Calculated (indicating method); Estimated.Name and address of the disposer.Address of actual disposal site receiving the transfer.
10. Off-site transfer of non-hazardous waste — where exceeding the threshold value in Article 5(1) of Regulation (EC) No 166/2006
Type Format
10.1 For recovery (R) Total mass of transfers (tonnes/year).Quantification method used: Measured (indicating analytical method); Calculated (indicating method); Estimated.
10.2 For disposal (D) Total mass of transfers (tonnes/year).Quantification method used: Measured (indicating analytical method); Calculated (indicating method); Estimated.











