
COUNCIL DECISION (EU) 2016/1315 of 18 July 2016 on the position to be adopted, on behalf of the European Union, within the Association Committee established by the Euro-Mediterranean Agreement establishing an Association between the European Communities and their Member States, of the one part, and the Hashemite Kingdom of Jordan, of the other part, as regards a temporary amendment to Protocol 3 to that Agreement concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation as a response in favour of the refugees fleeing the conflict in Syria 

THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular the first subparagraph of Article 207(4), in conjunction with Article 218(9) thereof,
Having regard to the proposal from the European Commission,
Whereas:

(1) The Euro-Mediterranean Agreement establishing an Association between the European Communities and their Member States, of the one part, and the Hashemite Kingdom of Jordan, of the other part (‘the Agreement’) entered into force on 1 May 2002. Pursuant to Article 89 of the Agreement, an Association Council was established to examine any major issues arising within the framework of the Agreement and any other bilateral or international issues of mutual interest.

(2) Pursuant to Article 92 of the Agreement, an Association Committee was established with responsibility for the implementation of the Agreement and to which the Association Council may delegate, in full or in part, any of its powers.

(3) Pursuant to Article 94(1) of the Agreement, the Association Committee is to have the power to take decisions for the management of the Agreement as well as in areas where the Association Council has delegated its powers to it.

(4) Pursuant to Article 2 of Council and Commission Decision 2002/357/EC,ECSC, the position to be taken by the Union within the Association Committee is to be laid down by the Council on a proposal by the Commission.

(5) Pursuant to Article 39 of Protocol 3 to the Agreement, as amended by Decision No 1/2006 of the EU Jordan Association Council, the Association Committee may decide to amend the provisions of that Protocol.

(6) The Hashemite Kingdom of Jordan (‘Jordan’) submitted proposals to the international community for a holistic approach for an economic response to the Syrian refugee crisis.

(7) In the framework of the International Conference on Supporting Syria and the Region, held in London on 4 February 2016, Jordan declared its intention to permit Syrian refugees to participate in the formal labour market in Jordan and set out a number of steps it would take towards that end, in particular with a view to creating approximately 200 000 job opportunities for Syrian refugees.

(8) In relation to that initiative, Jordan made a specific request on 12 December 2015 for a temporary relaxation of the rules of origin to be made available under the Agreement so as to enhance Jordan's exports to the Union and create additional employment opportunities, especially for Syrian refugees.

(9) As a result of the examination of Jordan's request, the Council, on behalf of the Union, considers it justified to agree to additional rules of origin that, under the conditions specified in the Annex to the draft Decision of the Association Committee attached to this Decision (‘the draft Decision of the Association Committee’), in particular as regards relevant products, production zones and the creation of additional employment for Syrian refugees, should be made available as an alternative to those laid down in Annex II to Protocol 3 of the Agreement for exports from Jordan and should be those applied by the Union to imports from least-developed countries under the Generalised Scheme of Preferences/Everything But Arms initiative.

(10) The Annex to the draft Decision of the Association Committee should apply until 31 December 2026 and a mid-term review should be undertaken allowing the parties to make adjustments through a decision of the Association Committee, if necessary.

(11) The achievement by Jordan of its objective of creating around 200 000 job opportunities for Syrian refugees would represent a significant milestone also in respect of the implementation of the draft Decision of the Association Committee. Accordingly, once that objective is achieved, the Union and Jordan will consider further simplifying the conditions for producers in Jordan to benefit from the Decision of the Association Committee.

(12) The application of the Annex to the Decision of the Association Committee should be accompanied by appropriate monitoring and reporting obligations and it should be possible to suspend the application of the Annex to the Decision of the Association Committee if the conditions for its application are no longer fulfilled or if the conditions for safeguard measures are met,
HAS ADOPTED THIS DECISION:

Article 1 

1. The position to be adopted on behalf of the European Union in the EU-Jordan Association Committee established in accordance with Article 92 of the Agreement, as regards a temporary amendment to Protocol 3 to that Agreement concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation, shall be based on the draft Decision of that Association Committee, attached to this Decision.
2. Minor technical corrections to the draft Decision of the Association Committee may be agreed to by the representatives of the Union in the Association Committee without further decision of the Council.
Article 2 
After its adoption, the Decision of the Association Committee shall be published in the Official Journal of the European Union.
Article 3 
This Decision shall enter into force on the date of its adoption.
Done at Brussels, 18 July 2016.
For the Council
The President
F. MOGHERINIDRAFT
DECISION No [1]/2016 OF THE EU-JORDAN ASSOCIATION COMMITTEE of [x/x/]2016 amending the provisions of Protocol 3 to the Euro-Mediterranean Agreement establishing an Association between the European Communities and their Member States, of the one part, and the Hashemite Kingdom of Jordan, of the other part, concerning the definition of the concept of ‘originating products’ and the list of working or processing required to be carried out on non-originating materials in order for certain categories of products, manufactured in dedicated development zones and industrial areas, and connected with generating employment for Syrian refugees and Jordanians, to obtain originating status 

THE EU-JORDAN ASSOCIATION COMMITTEE,
Having regard to the Euro-Mediterranean Agreement establishing an Association between the European Communities and their Member States, of the one part, and the Hashemite Kingdom of Jordan, of the other part, (‘the Agreement’), and in particular Article 94 of the Agreement and Article 39 of Protocol 3 to the Agreement,
Whereas:

(1) The Hashemite Kingdom of Jordan (‘Jordan’) submitted proposals to the international community for a holistic approach for an economic response to the Syrian refugee crisis and, as part of this initiative, made a specific request on 12 December 2015 for a relaxation of the rules of origin applied under the Agreement so as to enhance Jordan's exports to the Union and create additional employment opportunities, especially for Syrian refugees as well as Jordanians.

(2) In the framework of the International Conference on Supporting Syria and the Region, held in London on 4 February 2016, Jordan declared its intention to promote the participation of Syrian refugees in the formal labour market in Jordan and, in that context, to provide 50,000 job opportunities for Syrian refugees within one year of the Conference and the overall objective to increase this level to approximately 200 000 job opportunities over the next years.

(3) A temporary relaxation of applicable rules of origin would allow for certain goods produced in Jordan to be subject to less stringent rules of origin for the purpose of determining preferential treatment on import into the Union than would otherwise apply. This temporary relaxation of applicable rules of origin would be part of the Union's support to Jordan in the context of the Syrian crisis and with the aim of mitigating the costs imposed by hosting a large number of Syrian refugees.

(4) The Union considers that the requested relaxation of the rules of origin would contribute to the overall objective of creating approximately 200 000 job opportunities for Syrian refugees.

(5) The relaxation of the rules of origin would be subject to certain conditions with a view to ensuring that the benefit goes to exporters that contribute to the Jordanian effort of employing Syrian refugees.

(6) The Annex to this Decision applies to goods produced in production facilities located in dedicated development zones and industrial areas within Jordan and contributing to the generation of employment for Syrian refugees and for the Jordanian population.

(7) The objective of this initiative is to stimulate trade and investment in those development zones and industrial areas and thereby contribute to improved economic and employment opportunities for Syrian refugees and for the Jordanian population.

(8) Annex II to Protocol 3 of the Agreement should therefore be complemented in order to specify the list of working or processing required to be carried out on non-originating materials in order for such products to obtain originating status. This complementary list of working or processing should be based on the origin rules applied by the Union for imports from least-developed countries under the Generalised Scheme of Preferences / Everything But Arms initiative.

(9) There should be a possibility to suspend temporarily the application of the Annex to this Decision, establishing a complementary list of working and processing in relation to a specific production facility if the conditions laid out in Article 1.1 of the Annex to this Decision are not met by that facility.

(10) There should also be a possibility to suspend temporarily the application of the Annex to this Decision with respect to any of the products listed in Article 2 of the Annex to this Decision imported in such increased quantities and under such conditions as to cause, or threaten to cause, serious injuries to Union producers of like or directly competing products in all or part of the territory of the Union or serious disturbances in any sector of the economy of the Union, in accordance with Articles 24 and 26 of the Agreement.

(11) This Decision should be valid for a limited period sufficient to provide an incentive for additional investment and employment generation and should therefore expire on 31 December 2026. The Union and Jordan will carry out a mid-term review pursuant to Article 1.7 of the Annex to this Decision, and may amend the Annex to this Decision through a decision of the Association Committee in the light of experience gained through the implementation of this Decision.

(12) The achievement by Jordan of its objective set in the framework of the International Conference of 4 February 2016 of creating approximately 200 000 job opportunities for Syrian refugees would represent a significant milestone also in respect of the implementation of this Decision, whereupon the Union and Jordan will consider further simplifying this support measure. This would require an amendment of the Annex to this Decision through a decision of the Association Committee,
HAS ADOPTED THIS DECISION:

Article 1 
Annex II to Protocol 3 of the Agreement, containing the list of working or processing required to be carried out on non-originating materials in order for the product manufactured to obtain originating status, is amended and complemented by Annex II(a) to Protocol 3 of the Agreement, contained in the Annex of this Decision.
Article 2 
Annex II(a) to Protocol 3 of the Agreement, contained in the Annex to this Decision, specifies the conditions for application and the list of working or processing required to be carried out on non-originating materials in order for the product manufactured in specific geographic areas connected with the additional employment of Syrian refugees to obtain originating status.
Article 3 
The Annex shall form an integral part of this Decision.
Article 4 
This Decision shall enter into force on the date of its adoption by the Association Committee.
It shall apply until 31 December 2026.
Done in [Amman][Brussels], [x/x/]2016
For the EU-Jordan Association Committee
ANNEX
ANNEX II(a) ADDENDUM TO THE LIST OF WORKING OR PROCESSING REQUIRED TO BE CARRIED OUT ON NON-ORIGINATING MATERIALS IN ORDER FOR THE PRODUCT MANUFACTURED TO OBTAIN ORIGINATING STATUS 

Common provisions
Article 1 
A. 
Definition of origin
1. For the products listed in Article 2, the following rules may also apply instead of the rules set out in Annex II of Protocol 3 provided that such products respect the following conditions:
(a) the required working or processing to be carried out on non-originating materials in order for such products to obtain originating status takes place in production facilities located in one of the following Development Zones and Industrial Areas: Alhussein Bin Abdullah II Industrial City- Alkarak, Aljeeza Industrial Area- Amman, Alqastal Industrial Area- Amman, Al Quwayrah Industrial Area- Aqaba, Al Tajamuat Industrial City- Sahab, Dulail Industrial City- Zarqa, El-Hashmieh Industrial Area- Zarqa, El-Ressaiefeh Industrial Areas- Zarqa, El-Sukhneh Industrial Area- Zarqa, Irbid Development Zone and Irbid Alhassan Industrial City, King Abdullah II Bin Alhussein City- Sahab, King Hussein Bin Talal Development Zone- Mafraq (including Mafraq Industrial City), Ma'an Development Zone- Ma'an, Marka Industrial Area- Amman, Muwaqqar Industrial City- Amman, Wadi El-Eisheh Industrial Area- Zarqa; and
(b) the total work force of each production facility located in these Development Zones and Industrial Areas in which such products are worked or processed contains a proportion of Syrian refugees equivalent to at least 15 % during the first and second years after the entry into force of this Annex and to at least 25 % from the beginning of the third year after the entry into force of this Annex. The relevant proportion shall be calculated at any point after the entry into force of this Annex and on an annual basis thereafter taking into account the number of Syrian refugees that are employed in formal and decent jobs and on a Full-Time Equivalent basis, and that have received a work permit valid for a minimum period of twelve months under the applicable legislation of Jordan.
2. The competent authorities of Jordan shall monitor the respect of the conditions laid out in paragraph 1, shall grant to an exporter of products fulfilling such conditions an authorisation number and shall promptly withdraw such authorisation number when such conditions are no longer fulfilled.
B. 
Proof of origin
3. A proof of origin made out pursuant to this Annex shall contain the following statement in English: ‘Derogation — Annex II(a) of Protocol 3 — name of the Development Zone or industrial area and authorisation number granted by the competent authorities of Jordan’.
C. 
Administrative cooperation
4. When, in accordance with Article 33(5) of this Protocol, as amended by decision No 1/2006 of the EU-Jordan Association Council, the customs authorities of Jordan inform the European Commission or the requesting customs authorities of the Member States of the European Union (the ‘Member States’) of the results of the verification, they shall specify that the products listed in Article 2 fulfil the conditions laid out in paragraph 1.
5. Where the verification procedure or any other available information appears to indicate that the conditions laid out in paragraph 1 are not fulfilled, Jordan shall, on its own initiative or at the request of the European Commission or the customs authorities of the Member States, carry out appropriate inquiries or arrange for such inquiries to be carried out with due urgency to identify and prevent such contraventions. For this purpose, the European Commission or the customs authorities of the Member States may participate in the inquiries.
D. 
Report, monitoring and review
6. Each year after the entry into force of this Annex, Jordan shall submit a report to the European Commission on the operation and effects of this Annex, including production and export statistics at 8 digit level or the highest level of detail available, and a list identifying the companies producing in the Development Zones and Industrial Areas and specifying the percentage of Syrian refugees they each employed on a year-by-year basis. The Parties shall jointly review such reports and any issues relating to the implementation and monitoring of this Annex in the framework of the existing bodies created under the Association Agreement and in particular in the Sub-Committee on Industry, Trade and Services. The Parties shall also consider the involvement of relevant international organisations such as the International Labour Organisation and the World Bank in the monitoring process.
7. Four years after the entry into force of this Annex, the Parties shall carry out a mid-term review to determine if any modifications should be made in light of experience of the implementation of this Annex and the evolution of the conflict in Syria. Based on this mid-term review, the Association Committee may consider possible amendments to this Annex.
8. Once Jordan achieves its target of facilitating a greater participation of Syrian refugees in the formal labour market by issuing a total number of around 200,000 work permits to Syrian refugees, the Parties will consider further simplifying the provisions of this Annex taking into consideration the developments in the Syrian refugee crisis. The Association Committee may amend this Annex to this effect.
E. 
Temporary suspension
9. 
(a) The Union may refer the matter to the Association Committee where the Union considers that there is insufficient evidence of Jordan or any specific production facility complying with the conditions laid out in paragraph 1. The referral shall identify whether the failure to comply with the conditions laid out in paragraph 1 is attributable to Jordan or any specific production facility.
(b) If within 90 days of the matter being referred to it, the Association Committee fails to declare that the respect of the conditions laid out in paragraph 1 is ensured, or if it fails to amend this Annex, the application of this Annex shall be suspended. The extent of the suspension shall be that identified in the referral of the Union to the Association Committee.
(c) The Association Committee may also decide to extend the 90-day period in which case the suspension shall take effect where the Association Council has failed to take any of the actions identified in point (b) within the extended period of time.
(d) The application of this Annex may resume if the Association Committee so decides.
(e) In the event of a suspension, this Annex shall continue to apply for a period of 4 months in relation to goods which are either in transit, or in temporary storage in customs warehouses or in free zones in the Union, on the date of temporary suspension of the Annex and for which a proof of origin was properly made out in accordance with the provisions of this Annex prior to the date of temporary suspension.
F. 
Safeguard mechanism
10. Where a product listed in Article 2 benefiting from the application of this Annex is imported in such increased quantities and under such conditions as to cause, or threaten to cause, serious injury to Union producers of like or directly competitive products in all or part of the territory of the Union or serious disturbances in any sector of the economy of the Union, in accordance with Articles 24 and 26 of the Agreement, the Union may refer the matter for examination to the Association Committee. If within 90 days of the matter being referred to it, the Association Committee fails to adopt a decision putting an end to such serious injury or threat thereof or serious disturbances or if no other satisfactory solution has been reached, the application of this Annex shall be suspended with respect to that product, until the Association Committee adopts a decision declaring that they have ended or until a satisfactory solution has been reached by the Parties and is notified to the Association Committee.
G. 
Entry into force and application
11. This Annex shall apply from the day of entry into force of the Association Committee decision to which it is attached and until 31 December 2026.
List of products and of required working and processing
Article 2 
The list of products to which this Annex applies and the rules of working and processing that may be applied as an alternative to those listed in Annex II are set out below.
Annex I to Protocol 3 of the Agreement containing the introductory notes to the list in Annex II to Protocol 3 of the Agreement applies mutatis mutandis to the list below, subject to the following amendments:
 In Note 5.2, the following basic materials are added in the second paragraph:
— glass fibres;
— metal fibres.
 In Note 7.3, the text is replaced by the following:
For the purposes of headings ex 2707 and 2713, simple operations, such as cleaning, decanting, desalting, water-separation, filtering, colouring, marking, obtaining a sulphur-content as a result of mixing products with different sulphur-contents, or any combination of these operations or like operations, do not confer origin.
ex Chapter 25 Salt; sulphur; earths and stone; plastering materials, lime and cement; except for: Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 2519 Crushed natural magnesium carbonate (magnesite), in hermetically-sealed containers, and magnesium oxide, whether or not pure, other than fused magnesia or dead-burned (sintered) magnesia Manufacture from materials of any heading, except that of the product. However, natural magnesium carbonate (magnesite) may be used
ex Chapter 27 Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes, except for: Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 2707 Oils in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents, being oils similar to mineral oils obtained by distillation of high temperature coal tar, of which more than 65 % by volume distils at a temperature of up to 250°C (including mixtures of petroleum spirit and benzole), for use as power or heating fuels Operations of refining and/or one or more specific process(es)orOther operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product
2710 Petroleum oils and oils obtained from bituminous materials, other than crude; preparations not elsewhere specified or included, containing by weight 70 % or more of petroleum oils or of oils obtained from bituminous materials, these oils being the basic constituents of the preparations; waste oils Operations of refining and/or one or more specific process(es)orOther operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product
2711 Petroleum gases and other gaseous hydrocarbons Operations of refining and/or one or more specific process(es)orOther operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product
2712 Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured Operations of refining and/or one or more specific process(es)orOther operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product
2713 Petroleum coke, petroleum bitumen and other residues of petroleum oils or of oils obtained from bituminous materials Operations of refining and/or one or more specific process(es)orOther operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product
ex Chapter 28 Inorganic chemicals; organic or inorganic compounds of precious metals, of rare-earth metals, of radioactive elements or of isotopes; except for: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 2811 Sulphur trioxide Manufacture from sulphur dioxideorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 2840 Sodium perborate Manufacture from disodium tetraborate pentahydrateorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
2843 Colloidal precious metals; inorganic or organic compounds of precious metals, whether or not chemically defined; amalgams of precious metals Manufacture from materials of any heading, including other materials of heading 2843
ex 2852  – Mercury compounds of internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives
 Manufacture from materials of any heading. However, the value of all the materials of heading 2909 used shall not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
  – Mercury compounds of nucleic acids and their salts, whether or not chemically defined; other heterocyclic compounds
 Manufacture from materials of any heading. However, the value of all the materials of headings 2852, 2932, 2933 and 2934 used shall not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex Chapter 29 Organic chemicals; except for: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 2905 Metal alcoholates of alcohols of this heading and of ethanol; except for: Manufacture from materials of any heading, including other materials of heading 2905. However, metal alcoholates of this heading may be used, provided that their total value does not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
2905 43;2905 44;2905 45 Mannitol; D-glucitol (sorbitol); Glycerol Manufacture from materials of any sub-heading, except that of the product. However, materials of the same sub-heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
2915 Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives Manufacture from materials of any heading. However, the value of all the materials of headings 2915 and 2916 used shall not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 2932  – Internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives
 Manufacture from materials of any heading. However, the value of all the materials of heading 2909 used shall not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
  – Cyclic acetals and internal hemiacetals and their halogenated, sulphonated, nitrated or nitrosated derivatives
 Manufacture from materials of any headingorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
2933 Heterocyclic compounds with nitrogen hetero-atom(s) only Manufacture from materials of any heading. However, the value of all the materials of headings 2932 and 2933 used shall not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
2934 Nucleic acids and their salts, whether or not chemically defined; other heterocyclic compounds Manufacture from materials of any heading. However, the value of all the materials of headings 2932, 2933 and 2934 used shall not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
Chapter 31 Fertilisers Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
Chapter 32 Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter; paints and varnishes; putty and other mastics; inks Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex Chapter 33 Essential oils and resinoids; perfumery, cosmetic or toilet preparations; except for: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 3301 Essential oils (terpeneless or not), including concretes and absolutes; resinoids; extracted oleoresins; concentrates of essential oils in fats, in fixed oils, in waxes or the like, obtained by enfleurage or maceration; terpenic by-products of the deterpenation of essential oils; aqueous distillates and aqueous solutions of essential oils. Manufacture from materials of any heading, including materials of a different ‘group’ in this heading. However, materials of the same group as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex Chapter 34 Soap, organic surface-active agents, washing preparations, lubricating preparations, artificial waxes, prepared waxes, polishing or scouring preparations, candles and similar articles, modelling pastes, ‘dental waxes’ and dental preparations with a basis of plaster, except for: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 3404 Artificial waxes and prepared waxes:
— With a basis of paraffin, petroleum waxes, waxes obtained from bituminous minerals, slack wax or scale wax Manufacture from materials of any heading
Chapter 35 Albuminoidal substances; modified starches; glues; enzymes Manufacture from materials of any heading, except that of the product, in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
Chapter 37 Photographic or cinematographic goods Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex Chapter 38 Miscellaneous chemical products; except for: Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 3803 Refined tall oil Refining of crude tall oilorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 3805 Spirits of sulphate turpentine, purified Purification by distillation or refining of raw spirits of sulphate turpentineorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
3806 30 Ester gums Manufacture from resin acidsorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 3807 Wood pitch (wood tar pitch) Distillation of wood tarorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
3809 10 Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or included: With a basis of amylaceous substances Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
3823 Industrial monocarboxylic fatty acids; acid oils from refining; industrial fatty alcohols Manufacture from materials of any heading, including other materials of heading 3823orManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
3824 60 Sorbitol other than that of sub-heading 2905 44 Manufacture from materials of any sub-heading, except that of the product and except materials of sub-heading 2905 44. However, materials of the same sub-heading as the product may be used, provided that their total value does not exceed 20 % of the exworks price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex Chapter 39 Plastics and articles thereof; except for: Manufacture from materials of any heading, except that of the product.orManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 3907  – Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS)
 Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
  – Polyester
 Manufacture from materials of any heading, except that of the productorManufacture from polycarbonate of tetrabromo-(bisphenol A)orManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 3920 Ionomer sheet or film Manufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralised with metal ions, mainly zinc and sodiumorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 3921 Foils of plastic, metallised Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micronorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex Chapter 40 Rubber and articles thereof; except for: Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
4012 Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, tyre treads and tyre flaps, of rubber: 
  – Retreaded pneumatic, solid or cushion tyres, of rubber
 Retreading of used tyres
  – Other
 Manufacture from materials of any heading, except those of headings 4011 and 4012orManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex Chapter 41 Raw hides and skins (other than furskins) and leather; except for: Manufacture from materials of any heading, except that of the product
4101 to 4103 Raw hides and skins of bovine (including buffalo) or equine animals (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment dressed or further prepared), whether or not dehaired or split; raw skins of sheep or lambs (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment dressed or further prepared), whether or not with wool on or split, other than those excluded by note 1(c) to Chapter 41; other raw hides and skins (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment dressed or further prepared), whether or not dehaired or split, other than those excluded by note 1(b) or 1(c) to Chapter 41 Manufacture from materials of any heading
4104 to 4106 Tanned or crust hides and skins, without wool or hair on, whether or not split, but not further prepared Re-tanning of tanned or pre-tanned hides and skins of sub-headings 4104 11, 4104 19, 4105 10, 4106 21, 4106 31 or 4106 91,orManufacture from materials of any heading, except that of the product
4107, 4112, 4113 Leather further prepared after tanning or crusting Manufacture from materials of any heading, except that of the product. However, materials of sub-headings 4104 41, 4104 49, 4105 30, 4106 22, 4106 32 and 4106 92 may be used only if a re-tanning operation of the tanned or crust hides and skins in the dry state takes place
Chapter 42 Articles of leather; saddlery and harness; travel goods, handbags and similar containers; articles of animal gut (other than silk worm gut) Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex Chapter 43 Furskins and artificial fur; manufactures thereof; except for: Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
4301 Raw furskins (including heads, tails, paws and other pieces or cuttings, suitable for furrier's use), other than raw hides and skins of heading 4101, 4102 or 4103 Manufacture from materials of any heading
ex 4302 Tanned or dressed furskins, assembled: 
  – Plates, crosses and similar forms
 Bleaching or dyeing, in addition to cutting and assembly of non-assembled tanned or dressed furskins
  – Other
 Manufacture from non-assembled, tanned or dressed furskins
4303 Articles of apparel, clothing accessories and other articles of furskin Manufacture from non-assembled tanned or dressed furskins of heading 4302
ex Chapter 44 Wood and articles of wood; wood charcoal; except for: Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 4407 Wood sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6 mm, planed, sanded or end-jointed Planing, sanding or end-jointing
ex 4408 Sheets for veneering (including those obtained by slicing laminated wood) and for plywood, of a thickness not exceeding 6 mm, spliced, and other wood sawn lengthwise, sliced or peeled of a thickness not exceeding 6 mm, planed, sanded or end-jointed Splicing, planing, sanding or endjointing
ex 4410 to ex 4413 Beadings and mouldings, including moulded skirting and other moulded boards Beading or moulding
ex 4415 Packing cases, boxes, crates, drums and similar packings, of wood Manufacture from boards not cut to size
ex 4418  – Builders' joinery and carpentry of wood
 Manufacture from materials of any heading, except that of the product. However, cellular wood panels, shingles and shakes may be used
  – Beadings and mouldings
 Beading or moulding
ex 4421 Match splints; wooden pegs or pins for footwear Manufacture from wood of any heading, except drawn wood of heading 4409
ex Chapter 51 Wool, fine or coarse animal hair; horsehair yarn and woven fabric; except for: Manufacture from materials of any heading, except that of the product
5106 to 5110 Yarn of wool, of fine or coarse animal hair or of horsehair Spinning of natural fibres or extrusion of man-made fibres accompanied by spinning
5111 to 5113 Woven fabrics of wool, of fine or coarse animal hair or of horsehair: WeavingorPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
ex Chapter 52 Cotton; except for: Manufacture from materials of any heading, except that of the product
5204 to 5207 Yarn and thread of cotton Spinning of natural fibres or extrusion of man-made fibres accompanied by spinning
5208 to 5212 Woven fabrics of cotton: WeavingorPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
ex Chapter53 Other vegetable textile fibres; paper yarn and woven fabrics of paper yarn; except for: Manufacture from materials of any heading, except that of the product
5306 to 5308 Yarn of other vegetable textile fibres; paper yarn Spinning of natural fibres or extrusion of man-made fibres accompanied by spinning
5309 to 5311 Woven fabrics of other vegetable textile fibres; woven fabrics of paper yarn: WeavingPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5401 to 5406 Yarn, monofilament and thread of man-made filaments Extrusion of man-made fibres accompanied by spinning OR spinning of natural fibres
5407 and 5408 Woven fabrics of man-made filament yarn: WeavingorPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5501 to 5507 Man-made staple fibres Extrusion of man-made fibres
5508 to 5511 Yarn and sewing thread of man-made staple fibres Spinning of natural fibres or extrusion of man-made fibres accompanied by spinning
5512 to 5516 Woven fabrics of man-made staple fibres: WeavingorPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
ex Chapter56 Wadding, felt and non-wovens; special yarns; twine, cordage, ropes and cables and articles thereof; except for: Extrusion of man-made fibres accompanied by spinning or spinning of natural fibresorFlocking accompanied by dyeing or printing
5602 Felt, whether or not impregnated, coated, covered or laminated: 
  – Needleloom felt
 Extrusion of man-made fibres accompanied by fabric formation,However:
— polypropylene filament of heading 5402,
— polypropylene fibres of heading 5503 or 5506, or
— polypropylene filament tow of heading 5501,of which the denomination in all cases of a single filament or fibre is less than 9 decitex,may be used, provided that their total value does not exceed 40 % of the ex-works price of the productorFabric formation alone in the case of felt made from natural fibres
  – Other
 Extrusion of man-made fibres accompanied by fabric formation,orFabric formation alone in the case of other felt made from natural fibres
5603 Nonwovens, whether or not impregnated, coated, covered or laminated Any non-woven process including needle punching
5604 Rubber thread and cord, textile covered; textile yarn, and strip and the like of heading 5404 or 5405, impregnated, coated, covered or sheathed with rubber or plastics: 
  – Rubber thread and cord, textile covered
 Manufacture from rubber thread or cord, not textile covered
  – Other
 Extrusion of man-made fibres accompanied by spinning or spinning of natural fibres
5605 Metallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading 5404 or 5405, combined with metal in the form of thread, strip or powder or covered with metal Extrusion of man-made fibres accompanied by spinning or spinning of natural and/or man-made staple fibres
5606 Gimped yarn, and strip and the like of heading 5404 or 5405, gimped (other than those of heading 5605 and gimped horsehair yarn); chenille yarn (including flock chenille yarn); loop wale-yarn Extrusion of man-made fibres accompanied by spinning or spinning of natural and/or man-made staple fibresorSpinning accompanied with flockingorFlocking accompanied by dyeing
Chapter 57 Carpets and other textile floor coverings: Spinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by weavingorManufacture from coir yarn or sisal yarn or jute yarnorFlocking accompanied by dyeing or by printingorTufting accompanied by dyeing or by printingExtrusion of man-made fibres accompanied by non-woven techniques including needle punchingHowever:
— polypropylene filament of heading 5402,
— polypropylene fibres of heading 5503 or 5506, or
— polypropylene filament tow of heading 5501,of which the denomination in all cases of a single filament or fibre is less than 9 decitex, may be used, provided that their total value does not exceed 40 % of the ex-works price of the productJute fabric may be used as a backing
ex Chapter 58 Special woven fabrics; tufted textile fabrics; lace; tapestries; trimmings; embroidery; except for: WeavingorPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5805 Hand-woven tapestries of the types Gobelins, Flanders, Aubusson, Beauvais and the like, and needle-worked tapestries (for example, petit point, cross stitch), whether or not made up Manufacture from materials of any heading, except that of the product
5810 Embroidery in the piece, in strips or in motifs Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
5901 Textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books or the like; tracing cloth; prepared painting canvas; buckram and similar stiffened textile fabrics of a kind used for hat foundations Weaving accompanied by dyeing or by flocking or by coatingorFlocking accompanied by dyeing or printing
5902 Tyre cord fabric of high tenacity yarn of nylon or other polyamides, polyesters or viscose rayon: 
  – Containing not more than 90 % by weight of textile materials
 Weaving
  – Other
 Extrusion of man-made fibres accompanied by weaving
5903 Textile fabrics impregnated, coated, covered or laminated with plastics, other than those of heading 5902 Weaving accompanied by dyeing or by coatingorPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5904 Linoleum, whether or not cut to shape; floor coverings consisting of a coating or covering applied on a textile backing, whether or not cut to shape Weaving accompanied by dyeing or by coating
5905 Textile wall coverings: 
  – Impregnated, coated, covered or laminated with rubber, plastics or other materials
 Weaving accompanied by dyeing or by coating
  – Other
 Spinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by weavingorWeaving accompanied by dyeing or by coatingorPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product:
5906 Rubberised textile fabrics, other than those of heading 5902: 
  – Knitted or crocheted fabrics
 Spinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by knittingorKnitting accompanied by dyeing or by coatingorDyeing of yarn of natural fibres accompanied by knitting
  – Other fabrics made of synthetic filament yarn, containing more than 90 % by weight of textile materials
 Extrusion of man-made fibres accompanied by weaving
  – Other
 Weaving accompanied by dyeing or by coatingorDyeing of yarn of natural fibres accompanied by weaving
5907 Textile fabrics otherwise impregnated, coated or covered; painted canvas being theatrical scenery, studio back-cloths or the like Weaving accompanied by dyeing or by flocking or by coatingorFlocking accompanied by dyeing or by printingorPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5908 Textile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like; incandescent gas mantles and tubular knitted gas mantle fabric therefor, whether or not impregnated: 
  – Incandescent gas mantles, impregnated
 Manufacture from tubular knitted gas-mantle fabric
  – Other
 Manufacture from materials of any heading, except that of the product
5909 to 5911 Textile articles of a kind suitable for industrial use: 
  – Polishing discs or rings other than of felt of heading 5911
 Weaving
  – Woven fabrics, of a kind commonly used in papermaking or other technical uses, felted or not, whether or not impregnated or coated, tubular or endless with single or multiple warp and/or weft, or flat woven with multiple warp and/or weft of heading 5911
 Weaving
  – Other
 Extrusion of man-made filament yarn OR spinning of natural or man-made staple fibres, accompanied by weavingorWeaving accompanied by dyeing or coating
Chapter 60 Knitted or crocheted fabrics Spinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by knittingorKnitting accompanied by dyeing or by flocking or by coatingorFlocking accompanied by dyeing or by printingorDyeing of yarn of natural fibres accompanied by knittingorTwisting or texturing accompanied by knitting provided that the value of the non-twisted/non-textured yarns used does not exceed 47,5 % of the ex-works price of the product
Chapter 61 Articles of apparel and clothing accessories, knitted or crocheted: 
  – Obtained by sewing together or otherwise assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form
 Manufacture from fabric
  – Other
 Spinning of natural and/or man-made staple fibres or extrusion of man-made filament yarn, in each case accompanied by knitting (knitted to shape products)orDyeing of yarn of natural fibres accompanied by knitting (knitted to shape products)
ex Chapter 62 Articles of apparel and clothing accessories, not knitted or crocheted; except for: Manufacture from fabric
6213 and 6214 Handkerchiefs, shawls, scarves, mufflers, mantillas, veils and the like: 
  – Embroidered
 Weaving accompanied by making-up (including cutting)ORManufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the productORMaking-up preceded by printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
  – Other
 Weaving accompanied by making-up (including cutting)orMaking-up followed by printing accompanied by at least two preparatory finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
6217 Other made up clothing accessories; parts of garments or of clothing accessories, other than those of heading 6212: 
  – Embroidered
 Weaving accompanied by making-up (including cutting)orManufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product
  – Fire-resistant equipment of fabric covered with foil of aluminised polyester
 Weaving accompanied by making-up (including cutting)orCoating provided that the value of the uncoated fabric used does not exceed 40 % of the ex-works price of the product accompanied by making-up (including cutting)
  – Interlinings for collars and cuffs, cut out
 Manufacture from materials of any heading, except that of the product, and in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 63 Other made-up textile articles; sets; worn clothing and worn textile articles; rags; except for: Manufacture from materials of any heading, except that of the product
6301 to 6304 Blankets, travelling rugs, bed linen etc.; curtains etc.; other furnishing articles: 
  – Of felt, of nonwovens
 Any non-woven process including needle punching accompanied by making up (including cutting)
  – Other:
 
  – – Embroidered
 Weaving or knitting accompanied by making-up (including cutting)orManufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product
  – – Other
 Weaving or knitting accompanied by making-up (including cutting)
6305 Sacks and bags, of a kind used for the packing of goods Weaving or knitting and making-up (including cutting)
6306 Tarpaulins, awnings and sun blinds; tents; sails for boats, sailboards or landcraft; camping goods: 
  – Of nonwovens
 Any non-woven process including needle punching accompanied by making up (including cutting)
  – Other
 Weaving accompanied by making-up (including cutting)orCoating provided that the value of the uncoated fabric used does not exceed 40 % of the ex-works price of the product accompanied by making-up (including cutting)
6307 Other made-up articles, including dress patterns Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
6308 Sets consisting of woven fabric and yarn, whether or not with accessories, for making up into rugs, tapestries, embroidered table cloths or serviettes, or similar textile articles, put up in packings for retail sale Each item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated, provided that their total value does not exceed 25 % of the ex-works price of the set
ex Chapter 64 Footwear, gaiters and the like; parts of such articles; except for: Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406
6406 Parts of footwear (including uppers whether or not attached to soles other than outer soles); removable in-soles, heel cushions and similar articles; gaiters, leggings and similar articles, and parts thereof Manufacture from materials of any heading, except that of the product
Chapter 65 Headgear and parts thereof Manufacture from materials of any heading, except that of the product
ex Chapter 68 Articles of stone, plaster, cement, asbestos, mica or similar materials, except for: Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 6803 Articles of slate or of agglomerated slate Manufacture from worked slate
ex 6812 Articles of asbestos; articles of mixtures with a basis of asbestos or of mixtures with a basis of asbestos and magnesium carbonate Manufacture from materials of any heading
ex 6814 Articles of mica, including agglomerated or reconstituted mica, on a support of paper, paperboard or other materials Manufacture from worked mica (including agglomerated or reconstituted mica)
Chapter 69 Ceramic products Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex Chapter 70 Glass and glassware, except for: Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
7006 Glass of heading 7003, 7004 or 7005, bent, edge-worked, engraved, drilled, 
  – Glass-plate substrates, coated with a dielectric thin film, and of a semiconductor grade in accordance with SEMII-standards
 Manufacture from non-coated glass-plate substrate of heading 7006
  – Other
 Manufacture from materials of heading 7001
7010 Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass Manufacture from materials of any heading, except that of the productorCutting of glassware, provided that the total value of the uncut glassware used does not exceed 50 % of the ex-works price of the product
7013 Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading 7010 or 7018) Manufacture from materials of any heading, except that of the productorCutting of glassware, provided that the total value of the uncut glassware used does not exceed 50 % of the ex-works price of the productorHand-decoration (except silk-screen printing) of hand-blown glassware, provided that the total value of the hand-blown glassware used does not exceed 50 % of the ex-works price of the product
ex 7019 Articles (other than yarn) of glass fibres Manufacture from:
— uncoloured slivers, rovings, yarn or chopped strands, or
— glass wool
ex Chapter 71 Natural or cultured pearls, precious or semi-precious stones, precious metals, metals clad with precious metal, and articles thereof; imitation jewellery; coin, except for: Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
7106, 7108 and 7110 Precious metals: 
  – Unwrought
 Manufacture from materials of any heading, except those of headings 7106, 7108 and 7110orElectrolytic, thermal or chemical separation of precious metals of heading 7106, 7108 or 7110orFusion and/or alloying of precious metals of heading 7106, 7108 or 7110 with each other or with base metals
  – Semi-manufactured or in powder form
 Manufacture from unwrought precious metals
ex 7107, ex 7109 and ex 7111 Metals clad with precious metals, semi-manufactured Manufacture from metals clad with precious metals, unwrought
7115 Other articles of precious metal or of metal clad with precious metal Manufacture from materials of any heading, except that of the product
7117 Imitation jewellery Manufacture from materials of any heading, except that of the productorManufacture from base metal parts, not plated or covered with precious metals, provided that the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 73 Articles of iron or steel; except for: Manufacture from materials of any heading, except that of the product
ex 7301 Sheet piling Manufacture from materials of heading 7207
7302 Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole pates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails Manufacture from materials of heading 7206
7304, 7305 and 7306 Tubes, pipes and hollow profiles, of iron (other than cast iron) or steel Manufacture from materials of heading 7206, 7207, 7208, 7209, 7210, 7211, 7212, 7218, 7219, 7220 or 7224
ex 7307 Tube or pipe fittings of stainless steel Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks, provided that the total value of the forged blanks used does not exceed 35 % of the ex-works price of the product
7308 Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel Manufacture from materials of any heading, except that of the product. However, welded angles, shapes and sections of heading 7301 may not be used
ex 7315 Skid chain Manufacture in which the value of all the materials of heading 7315 used does not exceed 50 % of the ex-works price of the product
ex Chapter 74 Copper and articles thereof; except for: Manufacture from materials of any heading, except that of the product
7403 Refined copper and copper alloys, unwrought Manufacture from materials of any heading
ex Chapter 76 Aluminium and articles thereof; except for: Manufacture from materials of any heading, except that of the product
7601 Unwrought aluminium Manufacture from materials of any heading
7607 Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm Manufacture from materials of any heading, except that of the product and heading 7606
ex Chapter 78 Lead and articles thereof, except for: Manufacture from materials of any heading, except that of the product
7801 Unwrought lead: 
  – Refined lead
 Manufacture from materials of any heading
  – Other
 Manufacture from materials of any heading, except that of the product. However, waste and scrap of heading 7802 may not be used
Chapter 80 Tin and articles thereof Manufacture from materials of any heading, except that of the product
ex Chapter 82 Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal; except for: Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8206 Tools of two or more of the headings 8202 to 8205, put up in sets for retail sale Manufacture from materials of any heading, except those of headings 8202 to 8205. However, tools of headings 8202 to 8205 may be incorporated into the set, provided that their total value does not exceed 15 % of the ex-works price of the set
8211 Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208, and blades therefor Manufacture from materials of any heading, except that of the product. However, knife blades and handles of base metal may be used
8214 Other articles of cutlery (for example; hair clippers, butchers' or kitchen cleavers, choppers and mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files) Manufacture from materials of any heading, except that of the product. However, handles of base metal may be used
8215 Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware Manufacture from materials of any heading, except that of the product. However, handles of base metal may be used
ex Chapter 83 Miscellaneous articles of base metal; except for: Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 8302 Other mountings, fittings and similar articles suitable for buildings, and automatic door closers Manufacture from materials of any heading, except that of the product. However, other materials of heading 8302 may be used, provided that their total value does not exceed 20 % of the ex-works price of the product
ex 8306 Statuettes and other ornaments, of base metal Manufacture from materials of any heading, except that of the product. However, other materials of heading 8306 may be used, provided that their total value does not exceed 30 % of the ex-works price of the product
ex Chapter 84 Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8401 Nuclear reactors; fuel elements (cartridges), non-irradiated, for nuclear reactors; machinery and apparatus for isotopic separation Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8407 Spark-ignition reciprocating or rotary internal combustion piston engines Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8408 Compression-ignition internal combustion piston engines (diesel or semi-diesel engines Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8427 Fork-lift trucks; other works trucks fitted with lifting or handling equipment Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8482 Ball or roller bearings Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex Chapter 85 Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for: Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8501, 8502 Electric motors and generators; Electric generating sets and rotary converters Manufacture from materials of any heading, except that of the product and of heading 8503orManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8513 Portable electric lamps designed to function by their own source of energy (for example, dry batteries, accumulators, magnetos), other than lighting equipment of heading 8512 Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8519 Sound recording and sound reproducing apparatus Manufacture from materials of any heading, except that of the product and of heading 8522orManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8521 Video recording or reproducing apparatus, whether or not incorporating a video tuner Manufacture from materials of any heading, except that of the product and of heading 8522orManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8523 Prepared unrecorded media for sound recording or similar recording of other phenomena, other than products of Chapter 37 Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8525 Transmission apparatus for radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras, digital cameras and other video camera recorders Manufacture from materials of any heading, except that of the product and of heading 8529orManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8526 Radar apparatus, radio navigational aid apparatus and radio remote control apparatus Manufacture from materials of any heading, except that of the product and of heading 8529orManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8527 Reception apparatus for radio-broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock Manufacture from materials of any heading, except that of the product and of heading 8529orManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8528 Monitors and projectors, not incorporating television reception apparatus; reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus Manufacture from materials of any heading, except that of the product and of heading 8529orManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8535 to 8537 Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits; connectors for optical fibres, optical fibre bundles or cables; boards, panels, consoles, desks, cabinets and other bases, for electric control or the distribution of electricity Manufacture from materials of any heading, except that of the product and of heading 8538orManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8540 11 and 8540 12 Cathode ray television picture tubes, including video monitor cathode ray tubes Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 8542 31 to ex 8542 33 and ex 8542 39 Monolithic integrated circuits Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the productorThe operation of diffusion, in which integrated circuits are formed on a semi-conductor substrate by the selective introduction of an appropriate dopant, whether or not assembled and/or tested in a non-party
8544 Insulated (including enamelled or anodised) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8545 Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8546 Electrical insulators of any material Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8547 Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating materials apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly, other than insulators of heading 8546; electrical conduit tubing and joints therefor, of base metal lined with insulating material Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8548 Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators; electrical parts of machinery or apparatus, not specified or included elsewhere in this Chapter Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
Chapter 86 Railway or tramway locomotives, rolling-stock and parts thereof; railway or tramway track fixtures and fittings and parts thereof; mechanical (including electro-mechanical) traffic signalling equipment of all kinds. Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex Chapter 87 Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof; except for: Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
8711 Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex Chapter 90 Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof, except for: Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
9002 Lenses, prisms, mirrors and other optical elements, of any material, mounted, being parts of or fittings for instruments or apparatus, other than such elements of glass not optically worked Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
9033 Parts and accessories (not specified or included elsewhere in this Chapter) for machines, appliances, instruments or apparatus of Chapter 90 Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
Chapter 91 Clocks and watches and parts thereof Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
Chapter 94 Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex Chapter 95 Toys, games and sports requisites; parts and accessories thereof, except for: Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex 9506 Golf clubs and parts thereof Manufacture from materials of any heading, except that of the product. However, roughly-shaped blocks for making golf-club heads may be used
ex Chapter 96 Miscellaneous manufactured articles, except for: Manufacture from materials of any heading, except that of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
9601 and 9602 Worked ivory, bone, tortoiseshell, horn, antlers, coral, mother-of-pearl and other animal carving material, and articles of these materials (including articles obtained by moulding.Worked vegetable or mineral carving material and articles of these materials; moulded or carved articles of wax, of stearin, of natural gums or natural resins or of modelling pastes, and other moulded or carved articles, not elsewhere specified or included; worked, unhardened gelatine (except gelatine of heading 3503) and articles of unhardened gelatin Manufacture from materials of any heading
9603 Brooms, brushes (including brushes constituting parts of machines, appliances or vehicles), hand-operated mechanical floor sweepers, not motorized, mops and feather dusters; prepared knots and tufts for broom or brush making; paint pads and rollers, squeegees (other than roller squeegees) Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
9605 Travel sets for personal toilet, sewing or shoe or clothes cleaning Each item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated, provided that their total value does not exceed 15 % of the ex-works price of the set
9606 Buttons, press-fasteners, snap-fasteners and press-studs, button moulds and other parts of these articles; button blanks Manufacture:
— from materials of any heading, except that of the product, and
— in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
9608 Ball-point pens; felt-tipped and other porous-tipped pens and markers; fountain pens, stylograph pens and other pens; duplicating stylos; propelling or sliding pencils; pen-holders, pencilholders and similar holders; parts (including caps and clips) of the foregoing articles, other than those of heading 9609 Manufacture from materials of any heading, except that of the product. However, nibs or nib-points of the same heading as the product may be used
9612 Typewriter or similar ribbons, inked or otherwise prepared for giving impressions, whether or not on spools or in cartridges; ink-pads, whether or not inked, with or without boxes Manufacture:
— from materials of any heading, except that of the product, and
— in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
9613 20 Pocket lighters, gas fuelled, refillable Manufacture in which the total value of the materials of heading 9613 used does not exceed 30 % of the ex-works price of the product
9614 Smoking pipes (including pipe bowls) and cigar or cigarette holders, and parts thereof Manufacture from materials of any heading








