
COMMISSION REGULATION (EU) No 1266/2009 of 16 December 2009 adapting for the tenth time to technical progress Council Regulation (EEC) No 3821/85 on recording equipment in road transport (Text with EEA relevance) (repealed) 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 1 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 2 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ANNEX
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1. AMENDMENTS TO CHAPTER I (DEFINITIONS) 
 1.1 The definition (f) is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 1.2 The definition (l) is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 1.3 The definition (s) is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 1.4 In footnote (1) to definitions ‘n’ and ‘p’ the following paragraph is added: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. AMENDMENTS TO CHAPTER II (GENERAL CHARACTERISTICS) 
 2.1 The following new Requirement is inserted after Requirement 001: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 2.2 Requirement 010 is amended as follows: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 2.3 The second indent of Requirement 011 is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. AMENDMENTS TO CHAPTER III (FUNCTIONS AND REQUIREMENTS) 
 3.1 The following requirement is inserted after Requirement 019: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.2 Requirement 028 is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.3 Requirement 029 is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.5 Requirement 038, Requirement 041 and Requirement 042 are replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.6 Requirements 050, 050a and 050b are replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.7 Requirement 065 is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.8 The following text is inserted after Requirement 067: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.9 In Requirement 094 the following line is inserted after ‘motion data error’ event: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.10 Requirement 104 is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.11 After Requirement 109a, the following requirement is inserted: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.12 Requirement 114a is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.13 Requirement 121 is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.14 Requirement 127 is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.15 Requirement 133a is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.16 Requirement 136 is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.17 The following requirements are inserted after Requirement 136: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.18 Requirement 141 is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.19 Requirement 145 is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.20 After Requirement 161, the following requirement is inserted: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4. AMENDMENTS TO CHAPTER V (INSTALLATION) 
 4.1 Requirement 239 shall have the following sentence added: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 4.2 Requirement 243 is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 4.3 Requirement 248 and Requirement 249 are replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 4.4 Requirement 250, sixth indent is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 4.5 After Requirement 250 the following requirement is inserted: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5. AMENDMENTS TO CHAPTER VI (INSPECTIONS) 
 5.1 Requirement 257 is amended as follows: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 5.2 The following requirements are inserted after Requirement 257: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6. AMENDMENTS TO CHAPTER VII (CARD ISSUING) 
 6.1 The following requirement is inserted after Requirement 268: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7. AMENDMENTS TO CHAPTER VIII (TYPE-APPROVAL) 
 7.1 In Section 1 General Points, a new sentence is added to the first paragraph: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 7.2 After Requirement 274, the following requirements are inserted: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 7.3 After Requirement 275, the following requirement is inserted: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 7.4 After Requirement 277, the following requirement is inserted: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 7.5 Requirement 281 is replaced by: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8. AMENDMENTS TO APPENDIX 1 (DATA DICTIONARY) 
 8.1 Section 2.2 is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 8.2 In Section 2.54, the line ‘ “0A”H to “0F”H RFU’, is replaced by: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 8.3 Section 2.70 is replaced with the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 8.4 Section 2.114 is replaced with the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 8.5 The last paragraph of Chapter 4 is replaced by the following text: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 8.6 In Chapter 2, Section 2.67 is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 8.7 Section 2.71 is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 8.8 Section 2.72 is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9. AMENDMENTS TO APPENDIX 3 (PICTOGRAMS) 
 9.1 Requirement PIC_001 is replaced by: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 9.2 Section 2, in the ‘Events’ sub-sub section, the following pictogram is added: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10. AMENDMENTS TO APPENDIX 4 (PRINTOUTS) 
 10.1 PRT_006 in Section 2, Data Block Specification, is replaced by: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 10.2 Section 3.1. Driver Activities from daily card printout is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 10.3 Section 3.2 Driver Activities from daily VU printout is replaced by: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11. AMENDMENTS TO APPENDIX 7 (DATA DOWNLOADING PROTOCOL) 
 11.1 The footnote in section 2.1 associated with download procedure, is replaced by the following: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12. AMENDMENTS TO APPENDIX 9 (TYPE APPROVAL – LIST OF MINIMUM REQUIRED TESTS) 
 12.1 In Chapter I the following ISO standard is added to the first paragraph: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 12.2 In Chapter II VEHICLE UNIT FUNCTIONAL TESTS, the following new requirement is added to Section 3 of the Functional Tests to be carried out: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 12.3 In Chapter II the following new requirement is added: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 12.4 In Chapter III the following new requirement is added: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 12.5 In Chapter III MOTION SENSOR FUNCTIONAL TESTS, the following new requirement is added to Section 3 of the Functional Tests to be carried out: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13. AMENDMENTS TO APPENDIX 12 (ADAPTOR FOR M1 and N1 VEHICLES) 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
