
1998 No. 1807
ROAD TRAFFIC
The Motor Cycles (Protective Helmets) Regulations 1998
Made 22nd July 1998
Laid before Parliament 30th July 1998
Coming into force 21st August 1998
The Secretary of State for the Environment, Transport and the Regions, in exercise of the powers conferred by sections 16 and 17 of the Road Traffic Act 1988, and after consultation with representative organisations in accordance with the provisions of section 195(2) of that Act, hereby makes the following Regulations:—
Citation and commencement
1 
These Regulations may be cited as the Motor Cycles (Protective Helmets) Regulations 1998 and shall come into force on 21st August 1998.
Revocation
2 
The Regulations specified in Schedule 1 to these Regulations are hereby revoked.
Interpretation
3 
In these Regulations—
(a) “EEA State” means a State which is a contracting party to the Agreement on the European Economic Area signed at Oporto on 2nd May 1992 as adjusted by the Protocol signed at Brussels on 17th March 1993;
(aa) “ECE Regulation 22” means Regulation No. 22 set out in Addendum 21 to the UNECE Agreement;
(aaa) “ECE Regulation 22.05” means ECE Regulation 22 as amended by the 05 series of amendments and all previous amendments in force on 30th June 2000;
(aaaa) “the UNECE Agreement” means the Agreement of the United Nations Economic Commission for Europe concluded at Geneva on 20th March 1958 as amended concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted to and/or used on wheeled vehicles and the conditions for the reciprocal recognition of approvals granted on the basis of these prescriptions, to which the United Kingdom is a party by virtue of an instrument of accession dated 14th January 1963 deposited with the Secretary General of the United Nations on 15th January 1963;
(b) a reference to a numbered regulation is a reference to the regulation so numbered in these Regulations; and
(c) a reference to a numbered paragraph is a reference to the paragraph so numbered in the regulation in which the reference occurs.
Protective headgear
4 

(1) Save as provided in  paragraphs (2) and (2A), every person driving or riding (otherwise than in a side-car) on a motor bicycle when on a road shall wear protective headgear.
(2) Nothing in paragraph (1) shall apply to any person driving or riding on a motor bicycle if—
(a) it is a mowing machine; or
(b) it is for the time being propelled by a person on foot.
(2A) Nothing in paragraph (1) shall apply to any person driving an electric scooter being used in a trial.
(3) In this regulation—
 “electric scooter” means a motor bicycle which—
(a) is fitted with an electric motor with a maximum continuous power rating not exceeding 500 watts;
(b) is not fitted with pedals that are capable of propelling the vehicle;
(c) has two wheels, one front and one rear, aligned along the direction of travel;
(d) is designed to carry no more than one person;
(e) has a maximum weight, excluding the driver, not exceeding 55 kilograms;
(f) has a maximum design speed not exceeding 15.5 miles per hour;
(g) has a means of directional control through the use of handlebars which are mechanically linked to the steered wheel;
(h) has a means of controlling the speed through hand controls; and
(i) has a power control that defaults to the ‘off’ position; 
 “local public authority” means—
(a) in England and Wales, any body, other person or holder of any office listed in Part 2 (local government) of Schedule 1 to the Freedom of Information Act 2000; and
(b) in Scotland, any body, other person or holder of any office listed in Part 3 (local government) of Schedule 1 to the Freedom of Information (Scotland) Act 2002;
 “motor bicycle” means a two-wheeled motor cycle, whether or not having a side-car attached, and for the purposes of this definition where the distance measured between the centre of the area of contact with the road surface of any two wheels of a motor cycle is less than 460 millimetres, those wheels shall be counted as one wheel;
 “protective headgear” means a helmet which—
(a) either—
(i) bears a marking applied by its manufacturer indicating compliance with the specifications contained in one of the British Standards (whether or not as modified by any amendment) mentioned in Schedule 2 to these Regulations; or
(ii) is of a type manufactured for use by persons on motor cycles which by virtue of its shape, material and construction could reasonably be expected to afford to the wearer a degree of protection from accidental injury similar to or greater than that provided by a helmet of a type prescribed by regulation 5;
(b) if worn with a chin cup attached to or held in position by a strap, is provided with an additional strap (to be fastened under the wearer’s jaw) for securing the helmet to the head; and
(c) is securely fastened to the head by means of straps provided for that purpose; ...
 “strap” includes any fastening device  ; and
 “trial” means an assessment as to the suitability of electric scooters for use on roads conducted by virtue of—
(a) an order made under sections 44 and 63(5) of the Road Traffic Act 1988; or
(b) an arrangement made between one or more local public authorities and a person who hires out electric scooters
Prescribed types of recommended helmet
5 

(1) The types of helmet hereby prescribed as types of helmet recommended as affording protection to persons on or in motor cycles from injury in the event of an accident are helmets which as regards their shape, construction and other qualities conform—
(a) with British Standard 6658:1985 as amended by Amendment Slip number 1 published on 28th February 1986 and are marked with the number of that standard, ...
(b) with any other standard accepted by an EEA State which offers in use equivalent levels of safety, suitability and fitness for purpose and are marked with a mark to indicate that standard,
and in each case  are marked with an approved certification mark of an approved body (whether or not they are required to be so marked by the standard in point) , or
(c) with ECE Regulation 22.05 including the approval, marking and conformity of production requirements of that Regulation.
(2) For the purposes of this regulation—
(a) an approved certification mark is—
(i) the certification mark of the British Standards Institution; or
(ii) a certification mark which indicates that a conformity assessment equivalent to that of the British Standards Institution has been undertaken, and
(b) an approved body is—
(i) the British Standards Institution; or
(ii) any body approved by an EEA State to undertake conformity assessments equivalent to those undertaken by the British Standards Institution.
Saving for the Trade Descriptions Act 1968 and the Consumer Protection Act 1987
6 
Nothing in regulation 5(1) shall be taken to authorise any person to apply any number or mark referred to therein in contravention of ... the Consumer Protection Act 1987.
Signed by authority of the Secretary of State for the Environment, Transport and the Regions
Helene Hayman
Parliamentary Under Secretary of State,
Department of the Environment, Transport and the Regions
22nd July 1998 
SCHEDULE 1
REVOCATIONS
Regulation 2


(1) (2)
Orders revoked References
The Motor Cycles (Protective Helmets) Regulations 1980 S.I.1980/1279
The Motor Cycles (Protective Helmets) (Amendment) Regulations 1981 S.I. 1981/374
The Motor Cycles (Protective Helmets) (Amendment) Regulations 1986 S.I. 1986/472
SCHEDULE 2
BRITISH STANDARDS
Regulation 4(3)
1 
British Standard 2001:1956 as amended by the following Amendment Slips—

Number Date of Publication
1 11th January 1957
2 23rd November 1959
3 27th February 1962
4 11th June 1964
5 13th March 1968
6 18th February 1972
2 
British Standard 1869:1960 as amended by the following Amendment Slips—

Number Date of Publication
1 29th May 1963
4 3rd December 1965
5 13th March 1968
6 10th August 1971
7 3rd January 1972
8 15th May 1973
9 1st February 1974
10 2nd September 1974
11 1st March 1975
3 
British Standard 2495:1960 as amended by the following Amendment Slips—

Number Date of Publication
1 29th May 1963
2 22nd February 1965
3 7th December 1965
4 22nd July 1966
5 10th August 1971
6 3rd January 1972
7 1st February 1974
8 1st March 1975
4 
British Standard 2001:1972 as amended by the following Amendment Slips—

Number Date of Publication
1 12th December 1972
2 26th January 1973
3 1st February 1974
4 2nd September 1974
5 1st March 1975
5 
British Standard 5361:1976
6 
British Standard 2495:1977
7 
British Standard 5361:1976 as amended by the following Amendment Slips—

Number Date of Publication
1 30th September 1977
2 31st August 1978
3 31st August 1979
4 29th February 1980
8 
British Standard 2495:1977 as amended by the following Amendment Slips—

Number Date of Publication
1 30th September 1977
2 31st August 1978
3 31st August 1979
4 29th February 1980
9 
British Standard 5361:1976 as amended by the following Amendment Slips—

Number Date of Publication
1 30th September 1977
2 31st August 1978
3 31st August 1979
4 29th February 1980
5 27th February 1981
10 
British Standard 2495:1977 as amended by the following Amendment Slips—

Number Date of Publication
1 30th September 1977
2 31st August 1978
3 31st August 1979
4 29th February 1980
5 27th February 1981
11 
British Standard 6658:1985 as amended by the following Amendment Slip—

Number Date of Publication
1 28th February 1986