
COUNCIL DIRECTIVE of 26 May 1986 on the approximation of the laws of the Member States relating to tyre pressure gauges for motor vehicles (86/217/EEC) (repealed) 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 1 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 2 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 3 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 4 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 5 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ANNEX
1. Scope 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Metrological requirements 
 2.1. Maximum permissible errors 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 2.2. Variation due to temperature 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 2.3. Hysteresis error 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 2.4. Return of the instrument's index to a predetermined mark 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. Technical requirements 
 3.1. Construction 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.2. Indicating device 
 3.2.1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.2.2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 3.2.3. The scale intervals must be equal over the entire scale. The scale spacings, which must not be less than 1,25 mm, must be either virtually equal or show only slight variations. Variation of scale spacing is permitted if the difference between two consecutive scale spacings does not exceed 20 % of the largest value and if the difference between the smallest and largest scale spacings does not exceed 50 % of the largest value. 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4. Inscriptions and marks 
 4.1. Inscriptions 
 4.1.1. Compulsory inscriptions 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 4.1.2. Optional inscriptions 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 4.2. Verification and sealing marks 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5. EEC pattern approval 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 5.1. Verification of compliance with technical and metrological requirements 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 5.1.1. Determination of instrument error 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 5.1.2. Determination of hysteresis error 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 5.1.3. Examination of the stability of the properties of pressure gauges 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 5.1.4. Variation due to temperature 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6. EEC initial verification 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 6.1. Examination of conformity 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 6.2. Verification tests 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 6.2.1. Determination of errors 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 6.2.2. Determination of hysteresis error 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
