
COUNCIL DIRECTIVE of 19 February 1973 on the harmonization of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (73/23/EEC) (repealed) 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 1 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 2 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 3 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 4 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 5 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 6 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 7 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 8 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 9 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 10 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 11 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 12 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 13 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Article 14 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ANNEX I
PRINCIPAL ELEMENTS OF THE SAFETY OBJECTIVES FOR ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS
1. General conditions 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Protection against hazards arising from the electrical equipment 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. Protection against hazards which may be caused by external influences on the electrical equipment 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ANNEX II
EQUIPMENT AND PHENOMENA OUTSIDE THE SCOPE OF THE DIRECTIVE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ANNEX III
CE CONFORMITY MARKING AND EC DECLARATION OF CONFORMITY
A. CE conformity marking 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B. EC declaration of conformity 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ANNEX IV
INTERNAL PRODUCTION CONTROL
1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. The manufacturer must establish the technical documentation described in point 3 and he or his authorized representative established within the Community must keep it on Community territory at the disposal of the relevant national authorities for inspection purposes for a period ending at least 10 years after the last product has been manufactured. 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. Technical documentation must enable the conformity of the electrical equipment to the requirements of this Directive to be assessed. It must, as far as relevant for such assessment, cover the design, manufacture and operation of the electrical equipment. It must include: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
