
1 

(1) These Regulations may be cited as the Road Vehicles (Type-Approval) (Amendment) Regulations 2024.
(2) Subject to paragraph (3), these Regulations come into force on 7th March 2024.
(3) In regulation 2(3)(b), the entries in the substituted table for “Emissions light duty vehicles (real driving emissions)” in item 2A come into force on 26th March 2024, except for the subject entry including note (3) (which accordingly comes into force on 7th March 2024).
(4) These Regulations extend to England and Wales, Scotland and Northern Ireland.
2 

(1) Regulation (EU) 2018/858 of the European Parliament and of the Council of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles is amended as follows.
(2) In Annex II, Part I, for item “41A”, substitute—“
41A Emissions (Euro VI) heavy duty vehicles Regulation (EC) No 595/2009Regulation (EU) No582/2011 X X X X X X     X
41B CO2 simulation tool licence (heavy-duty vehicles) Regulation (EC) No 595/2009Regulation (EU) 2017/2400     X X     

”.
(3) In Annex II, Part II―
(a) for the first paragraph below the title, substitute—“Where reference is made to a separate Directive or Regulation in the table in Part I—
(a) a type-approval granted under the following UN Regulations, or
(b) a Universal International Whole Vehicle Type Approval issued under UN Regulation No 0 that includes type-approval of the relevant item under the following UN Regulations,shall be considered as equivalent to a GB type-approval granted under the relevant separate Directive or Regulation, being UN Regulations to which the United Kingdom has accepted as a contracting party to the Revised 1958 Agreement.”.
(b) for the table, substitute—“

Item Subject UN Regulation Series of Amendments
1A Permissible sound level (not covering acoustic vehicle alerting system and replacement silencers) 51 03
Acoustic vehicle alerting system 138 01
Replacement silencing systems 59 02
2A Emissions light duty vehicles (diesel smoke) 24 03
Emissions light duty vehicles (does not cover diesel smoke, engine power, worldwide harmonized light vehicle test procedure or real driving emissions) 83 08
Emissions light duty vehicles (engine power) 85 00
Emissions light duty vehicles (worldwide harmonized light vehicle test procedure) 154 02 (Level: 1A or 2)
Emissions light duty vehicles (real driving emissions)
 168 00
9B Braking of passenger cars (electronic stability control part) 140 00
41A Emissions heavy duty vehicles 49 07
Emissions heavy duty vehicles (diesel smoke) 24 03
Emissions heavy duty (engine power) 85 00
46A Installation of tyres 142 01
Installation of tyres (not covering trailers nor a vehicle fitted with C3 tyres) 142 00
58 Pedestrian protection (not covering brake assist) 127 (pedestrian protection) 00
Pedestrian protection (brake assist part) 13-H (brake assist)or 139 (brake assist) 00 (Supplement 9 and above)00
59 Recyclability 133 00
62 Hydrogen storage systems 134 00
65 Advanced emergency braking system 131 01
66 Lane departure warning system 130 00
Where the separate Directive or Regulation contains installation requirements, these apply also to components and separate technical units approved in accordance with UN Regulations.




”.
(4) In Annex VII, in point 3, after “46A”, insert—“
46B Rolling resistance determination Regulation (EU) 2017/2400, Annex X”.
3 
In Commission Implementing Regulation (EU) 2020/683 of 15 April 2020 implementing Regulation (EU) 2018/858 of the European Parliament and of the Council with regards to the administrative requirements for the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles, in Annex V, in point 4(b), for the sentence beginning “Instead of the upper-case letter ‘E’…”, substitute “Instead of the upper-case letter ‘E’, the lower-case letter ‘g’ shall be used, followed by the number 11.”.
4 

(1) Commission Regulation (EU) No 1003/2010 of 8 November 2010 concerning type-approval requirements for the space for mounting and the fixing of rear registration plates on motor vehicles and their trailers is amended as follows.
(2) In Article 2 (Provisions for GB type-approval of a motor vehicle or a trailer with regard to the space for mounting and the fixing of rear registration plates) for paragraph 3, substitute—“
3. 
If the relevant requirements set out in either—
(a) Annex II to this Regulation, or
(b) subject to paragraph 3A, Part 2 of Annex III to Commission Implementing Regulation (EU) 2021/535 as it applies in EU law on the date that the Road Vehicles (Type-Approval) (Amendment) Regulations 2024 are made,are met, the approval authority shall grant a GB type-approval and issue a type-approval number in accordance with the numbering system set out in Annex IV to Commission Implementing Regulation (EU) 2020/683.
The approval authority may not assign the same number to another vehicle type.
3A. 
Where type-approval is sought pursuant to paragraph 3(b) above, the relevant requirements—
(a) do not include the requirements within that Part—
(i) at points 2.1.2. and 2.4.5.; or
(ii) any which relate to front registration plates; and
(b) include the requirement at point 1.2.3. of Annex II to this Regulation.”.
Signed by authority of the Secretary of State for Transport
Anthony Browne
Parliamentary Under Secretary of State
Department for Transport
13th February 2024