
Article 1 
A Union authorisation is granted to GEA Farm Technologies GmbH for the making available on the market and use of the biocidal product family ‘Iodine Teat Dip Products’ with authorisation number EU-0020125-0000 in accordance with the summary of the biocidal product characteristics set out in the Annex.
The Union authorisation is valid from 19 November 2019 until 31 October 2029.
Article 2 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 4 October 2019.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX
Iodine Teat dip products
Product type 3 — Veterinary hygiene (Disinfectants)
Authorisation number: EU-0020125-0000
R4BP asset number: EU-0020125-0000

PART I
1.  1.1. 

Name Iodine Teat dip products
 1.2. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 1.3. 

Name and address of the authorisation holder Name GEA Farm Technologies GmbH
Address Siemensstraße 25-27, 59199, Bönen, Germany
Authorisation number EU-0020125-0000
R4BP asset number EU-0020125-0000
Date of the authorisation 19 November 2019
Expiry date of the authorisation 31 October 2029
 1.4. 

Name of manufacturer GEA Farm Technologies
Address of manufacturer Wylye Works, BA12 9HT Warminster United Kingdom
Location of manufacturing sites Wylye Works, Watery Lane, BA12 9HT Warminster United KingdomGewerbestraße 5, 5325 Plainfeld Austriaul. Olowiana 10, 85-461 Bydgoszcz Poland
 1.5. 

Active substance Iodine
Name of manufacturer SQM Europe N.V.
Address of manufacturer St Pietersvliet 7„ bus 8 2000 Antwerp Belgium
Location of manufacturing sites Sociedad Quimica y Minera SA, Los Militares, Las Condes, 4290 Piso 4 Santiago Chile


Active substance Iodine
Name of manufacturer Nihon Tennen Gas Co., Ltd (Via Mitsui & Co Europe PLC)
Address of manufacturer Chiba Plant, 2508 Minami-Hinata, Shirako-Machi, Chosei-Gun„ 299-4205 Chosei-Gun Japan
Location of manufacturing sites Chiba Plant, 2508 Minami-Hinata, Shirako-Machi, Chosei-Gun„ 299-4205 Chosei-Gun Japan


Active substance Iodine
Name of manufacturer Norkem Ltd
Address of manufacturer Norkem House, Bexton Lane„ WA16 9FB Knutsford United Kingdom
Location of manufacturing sites OFICINA CALA CALA S/N, Unknown POZO ALMONTE Chile

2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,16 2,47
C9-11 Alcohol Ethoxylate C 9-11 alcohol with 6 moles of ethoxylate. Various brand names available including Imbentin C-91-060 Non-active substance 68439-46-3 614-482-0 0,0 2,35
 2.2. 

Formulation(s) AL — Any other liquidSL — Soluble concentrate

PART II 1.  1.1. 

Identifier Meta SPC 1 — Concentrates — Professional concentrates with 1:3, 1:4 and 1:7 dilution rates
 1.2. 

Number 1-1
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 1,58 2,47
C9-11 Alcohol Ethoxylate C 9-11 alcohol with 6 moles of ethoxylate. Various brand names available including Imbentin C-91-060 Non-active substance 68439-46-3 614-482-0 1,51 2,35
 2.2. 

Formulation(s) SL — Soluble concentrate
 3. 

Hazard statements Causes serious eye irritation.May cause damage to thyroid gland through prolonged or repeated exposure.May be corrosive to metals.Toxic to aquatic life with long lasting effects.
Precautionary statements Do not breathe vapours.Wash hands thoroughly after handling.Wear protective gloves.Wear protective clothing.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Get medical attention if you feel unwell.If eye irritation persists: Get medical advice.Collect spillage.Dispose of container according to local regulations.Dispose of contents according to local regulations.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: dip treatmentApplication via dip Cup: Using a traditional dip cup with non-return valves, dispense diluted product into the reservoir. Screw down the applicator portion. Squeeze the reservoir to fill the applicator. Cover the bottom two thirds of each teat with material. Dispose of unused material after each milkingThe same solution can be applied to multiple animals during the same milking session. Cups should be refilled with fresh solution before starting new milking session
Application rate(s) and frequency Quantity of diluted product to be applied per application:
— cows and buffaloes: 3 to 10 ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Product to be diluted by the relevant rate stated on the label. Either:25 % (1 part product to 3 parts water)20 % (1 part product to 4 parts water)12,5 % (1 part product to 7 parts water)In use concentration of products between 0,29 and 0,52 % (w/w) iodine.2 post milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.1.1. 
Dip at least 2/3 of the teat length with diluted product immediately after milking
 4.1.2. 
Wear protective chemical resistant gloves and eye protection when handling the concentrate

(glove material to be specified by the authorisation holder within the product information).

In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: spray treatmentApplication via pneumatic sprayer: Uptake lance of spray system is placed in the container of the diluted product. The diluted product is then pumped to a spray lance located in the milking parlour. The spray lance is then used to cover the bottom two thirds of teats in the diluted productApplication via manual trigger spray: Fill trigger spray bottle with diluted product. Use trigger spray to cover the bottom two thirds of each teat with diluted product
Application rate(s) and frequency Quantity of diluted product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Product to be diluted by the relevant rate stated on the label. Either:25 % (1 part product to 3 parts water)20 % (1 part product to 4 parts water)12,5 % (1 part product to 7 parts water)In use concentration of products between 0,29 and 0,52 % (w/w) iodine.2 post﻿ milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.2.1. 
Spray at least 2/3 of the teat length with diluted product immediately after milking
 4.2.2. 
Wear protective chemical resistant gloves and eye protection when handling the concentrate

(glove material to be specified by the authorisation holder within the product information).

Wear protective chemical resistant gloves and boots when applying the product by manual spraying (glove material to be specified by the authorisation holder within the product information)

A protective coverall (at least type 6, EN 13034) shall be worn.

In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection
 4.2.3. 
See general directions for use.
 4.2.4. 
See general directions for use.
 4.2.5. 
See general directions for use.
 4.3. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: dip treatmentApplication via foaming Dip cup: As for dip cup, however, when squeezed, the liquid is forced through a fine mesh, mixing with air and forming foam. This is then applied to the bottom two thirds of the cow’s udderThe same solution can be applied to multiple animals during the same milking session.
Application rate(s) and frequency Quantity of diluted product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Product to be diluted by the relevant rate stated on the label. Either:25 % (1 part product to 3 parts water)20 % (1 part product to 4 parts water)12,5 % (1 part product to 7 parts water)In use concentration of products between 0,29 and 0,52 % (w/w) iodine.2 post milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.3.1. 
Dip at least 2/3 of the teat length with diluted product immediately after milking
 4.3.2. 
Wear protective chemical resistant gloves and eye protection when handling the concentrate

(glove material to be specified by the authorisation holder within the product information).

In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection
 4.3.3. 
See general directions for use.
 4.3.4. 
See general directions for use.
 4.3.5. 
See general directions for use.
 5.  5.1. 
Keep out of reach of children

Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

Dilute product before application according to the ratio specified on the product label

Formanual dilution of the concentrate; Add the ratio of concentrate and water, specified on the product label, to a suitably sized container to achieve the required dilution rate. Mix to a uniform solution.

Before attaching the milking cluster, all teat-dip residues should be removed with either a single use towel or re-usable cloth. One cloth should be used per cow

For effective use against bacteria and yeast, product must be left in contact with the skin for at least 60 seconds

To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes).

Product can be used during the entire lactation period
 5.2. 
See use specific risk mitigation measures
 5.3. 
Remove and wash contaminated clothing before re-use.

After inhalation: Move to fresh air in case of accidental inhalation of fumes from overheating or combustion.

If you feel unwell, seek medical advice.

After contact with skin: Wash with water and soap as a precaution. Consult a doctor if skin irritation persists.

After contact with eyes: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical treatment by eye specialist.

After ingestion: Rinse out mouth and give plenty of water to drink. Never give anything by mouth to an unconscious person. Consult a physician.

Large spills should be contained using a chemical spill kit, soaked up using absorbent material such as kieselguhr and disposed of as hazardous waste.
 5.4. 
At the end of the treatment, dispose of unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual farm based waste water treatment plant.
 5.5. 
Protect from frost

Do not store at temperatures above 30 °C

Shelf life 12 months.
 6.  7.  7.1. 

Trade name(s) Ioklene Concentrate. Coars Dual
Authorisation number EU-0020125-0001 1-1
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 1,58
C9-11 Alcohol Ethoxylate C 9-11 alcohol with 6 moles of ethoxylate. Various brand names available including Imbentin C-91-060 Non-active substance 68439-46-3 614-482-0 1,51
 7.2. 

Trade name(s) Clinidip L Concentrate, Maxadine C, Diamond 3:1 Concentrate, Kristal 321, IO Spray 3:1 Concentrate, Coars Shield
Authorisation number EU-0020125-0002 1-1
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 2,06
C9-11 Alcohol Ethoxylate C 9-11 alcohol with 6 moles of ethoxylate. Various brand names available including Imbentin C-91-060 Non-active substance 68439-46-3 614-482-0 1,96
 7.3. 

Trade name(s) Clinidip Superconcentrate, Dunglinson Super IO 421 Concentrate, Ceanodine 4:1, Iodosan
Authorisation number EU-0020125-0003 1-1
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 2,47
C9-11 Alcohol Ethoxylate C 9-11 alcohol with 6 moles of ethoxylate. Various brand names available including Imbentin C-91-060 Non-active substance 68439-46-3 614-482-0 2,35
 7.4. 

Trade name(s) Priodine, Diamond Predip
Authorisation number EU-0020125-0004 1-1
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 2,32
C9-11 Alcohol Ethoxylate C 9-11 alcohol with 6 moles of ethoxylate. Various brand names available including Imbentin C-91-060 Non-active substance 68439-46-3 614-482-0 2,21
 1.  1.1. 

Identifier Meta SPC 2 — RTU Products — Professional RTU Liquid for application pre and post milking
 1.2. 

Number 1-2
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,16 0,5
C9-11 Alcohol Ethoxylate C 9-11 alcohol with 6 moles of ethoxylate. Various brand names available including Imbentin C-91-060 Non-active substance 68439-46-3 614-482-0 0,0 0,56
 2.2. 

Formulation(s) AL — Any other liquid
 3. 

Hazard statements May be corrosive to metals.Harmful to aquatic life with long lasting effects.
Precautionary statements Avoid release to the environment.Collect spillage.Dispose of contents in accordance with local regulations.Dispose of container in accordance with local regulations.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: dip treatmentApplication via dip Cup: Using a traditional dip cup with non-return valves, dispense RTU product into the reservoir. Screw down the applicator portion. Squeeze the reservoir to fill the applicator. Cover the bottom two thirds of each teat with material. Dispose of unused material after each milkingThe same solution can be applied to multiple animals during the same milking session.
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation in use concentration 0,16-0,30 % (w/w) iodine.2 pre milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.1.1. 
See general directions for use.
 4.1.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for post milking disinfection
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastAll
Field(s) of use Indoor
Application method(s) Open system: spray treatmentApplication via pneumatic sprayer: Uptake lance of spray system is placed in the container of the RTU product. The RTU product is then pumped to a spray lance located in the milking parlour. The spray lance is then used to cover the bottom two thirds of teats in the RTU productApplication via manual trigger spray: Fill trigger spray bottle with RTU product. Use trigger spray to cover the bottom two thirds of each teat with RTU product
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation In use concentration 0,16-0,30 % (w/w) iodine.2 pre milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.2.1. 
See general directions for use.
 4.2.2. 
Wear protective chemical resistant gloves when applying the product by manual spraying (glove material to be specified by the authorisation holder within the product information)

In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for post milking disinfection
 4.2.3. 
See general directions for use.
 4.2.4. 
See general directions for use.
 4.2.5. 
See general directions for use.
 4.3. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastAll
Field(s) of use Indoor
Application method(s) Open system: dip treatmentApplication via foaming Dip cup: As for dip cup, however, when squeezed, the liquid is forced through a fine mesh, mixing with air and forming foam. This is then applied to the bottom two thirds of the cow’s udderThe same solution can be applied to multiple animals during the same milking session.
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation. In use concentration 0,16-0,30 % (w/w) iodine.2 pre milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.3.1. 
See general directions for use.
 4.3.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for post milking disinfection
 4.3.3. 
See general directions for use.
 4.3.4. 
See general directions for use.
 4.3.5. 
See general directions for use.
 4.4. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: dip treatmentApplication via dip Cup: Using a traditional dip cup with non-return valves, dispense RTU product into the reservoir. Screw down the applicator portion. Squeeze the reservoir to fill the applicator. Cover the bottom two thirds of each teat with material. Dispose of unused material after each milkingThe same solution can be applied to multiple animals during the same milking session.
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation. In use concentration 0,16-0,50 % (w/w) iodine.2 post milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.4.1. 
Dip at least 2/3 of the teat length with RTU product immediately after milking

To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes).
 4.4.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre milking disinfection
 4.4.3. 
See general directions for use.
 4.4.4. 
See general directions for use.
 4.4.5. 
See general directions for use.
 4.5. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: spray treatmentApplication via pneumatic sprayer: Uptake lance of spray system is placed in the container of the RTU product. The RTU product is then pumped to a spray lance located in the milking parlour. The spray lance is then used to cover the bottom two thirds of teats in the RTU productApplication via manual trigger spray: Fill trigger spray bottle with RTU product. Use trigger spray to cover the bottom two thirds of each teat with RTU product
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation. In use concentration 0,16-0,50 % (w/w) iodine.2 post milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.5.1. 
Spray at least 2/3 of the teat length with RTU product immediately after milking

To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes).
 4.5.2. 
Wear protective chemical resistant gloves and boots when applying the product by manual spraying (glove material to be specified by the authorisation holder within the product information)

A protective coverall (at least type 6, EN 13034) shall be worn

In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre milking disinfection
 4.5.3. 
See general directions for use.
 4.5.4. 
See general directions for use.
 4.5.5. 
See general directions for use.
 4.6. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: dip treatmentApplication via foaming Dip cup: As for dip cup, however, when squeezed, the liquid is forced through a fine mesh, mixing with air and forming foam. This is then applied to the bottom two thirds of the cow’s udderThe same solution can be applied to multiple animals during the same milking session.
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation In use concentration 0,16-0,50 % (w/w) iodine.2 post milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.6.1. 
Dip at least 2/3 of the teat length with RTU product immediately after milking

To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes).
 4.6.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre milking disinfection
 4.6.3. 
See general directions for use.
 4.6.4. 
See general directions for use.
 4.6.5. 
See general directions for use.
 4.7. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: dip treatmentApplication via dip Cup: Using a traditional dip cup with non-return valves, dispense RTU product into the reservoir. Screw down the applicator portion. Squeeze the reservoir to fill the applicator. Cover the bottom two thirds of each teat with material. Dispose of unused material after each milkingThe same solution can be applied to multiple animals during the same milking session.
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation In use concentration 0,16-0,30 % (w/w) iodine.2 pre milking applications per animal, per day2 post milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.7.1. 
Post milking:

Dip at least 2/3 of the teat length with RTU product immediately after milking

To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes).
 4.7.2. 
Wear protective chemical resistant gloves when applying the product by dipping (glove material to be specified by the authorisation holder within the product information).

This product can be used for pre- and post-milking disinfection in combination. However, it should not be used in combination with a different iodine-based product.
 4.7.3. 
See general directions for use.
 4.7.4. 
See general directions for use.
 4.7.5. 
See general directions for use.
 4.8. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: spray treatmentApplication via pneumatic sprayer: Uptake lance of spray system is placed in the container of the RTU product. The RTU product is then pumped to a spray lance located in the milking parlour. The spray lance is then used to cover the bottom two thirds of teats in the RTU productApplication via manual trigger spray: Fill trigger spray bottle with RTU product. Use trigger spray to cover the bottom two thirds of each teat with RTU product
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended) –Ready to use formulation In use concentration 0,16-0,30 % (w/w) iodine.2 pre milking applications per animal, per day2 post milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.8.1. 
Post milking:

Spray at least 2/3 of the teat length with RTU product immediately after milking

To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes).
 4.8.2. 
Wear protective chemical resistant gloves and boots when applying the product by manual spraying (glove material to be specified by the authorisation holder within the product information)

A protective coverall (at least type 6, EN 13034) shall be worn

This product can be used for pre- and post-milking disinfection in combination. However, it should not be used in combination with a different iodine-based product.
 4.8.3. 
See general directions for use.
 4.8.4. 
See general directions for use.
 4.8.5. 
See general directions for use.
 4.9. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: dip treatmentApplication via foaming Dip cup: As for dip cup, however, when squeezed, the liquid is forced through a fine mesh, mixing with air and forming foam. This is then applied to the bottom two thirds of the cow’s udderThe same solution can be applied to multiple animals during the same milking session.
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1.5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation In use concentration 0,16-0,30 % (w/w) iodine.2 pre milking applications per animal, per day2 post milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.9.1. 
Post milking:

Dip at least 2/3 of the teat length with RTU product immediately after milking

To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes).
 4.9.2. 
Wear protective chemical resistant gloves when applying the product by foaming application method (glove material to be specified by the authorisation holder within the product information).

This product can be used for pre- and post-milking disinfection in combination. However, it should not be used in combination with a different iodine-based product.
 4.9.3. 
See general directions for use.
 4.9.4. 
See general directions for use.
 4.9.5. 
See general directions for use.
 5.  5.1. 
Keep out of reach of children

Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

Product can be used during the entire lactation period

Before attaching the milking cluster, all teat-dip residues should be removed with either a single use towel or re-usable cloth. One cloth should be used per cow

For effective use against bacteria and yeast, product must be left in contact with the skin for at least 60 seconds
 5.2. 
See use specific risk mitigation measures.
 5.3. 
Remove and wash contaminated clothing before re-use.

After inhalation: Move to fresh air in case of accidental inhalation of fumes from overheating or combustion.

If you feel unwell, seek medical advice.

After contact with skin: Wash with water and soap as a precaution. Consult a doctor if skin irritation persists.

After contact with eyes: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical treatment by eye specialist.

After ingestion: Rinse out mouth and give plenty of water to drink. Never give anything by mouth to an unconscious person. Consult a physician.

Large spills should be contained using a chemical spill kit, soaked up using absorbent material such as kieselguhr and disposed of as hazardous waste.
 5.4. 
At the end of the treatment, dispose of unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual farm based waste water treatment plant.
 5.5. 
Protect from frost

Do not store at temperatures above 30 °C

Shelf life 12 months
 6.  7.  7.1. 

Trade name(s) LuxSpray 30, Ioklene RTU, Corston Pre/Post Sprayable, Kristal Iocare Plus, PrePost, Autodine, Coars Super Pre
Authorisation number EU-0020125-0005 1-2
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,3
C9-11 Alcohol Ethoxylate C 9-11 alcohol with 6 moles of ethoxylate. Various brand names available including Imbentin C-91-060 Non-active substance 68439-46-3 614-482-0 0,305
 7.2. 

Trade name(s) LuxSpray 50, Silkidip, Ceanodine, IoSpray 10, Maxadine RTU, Diamond Superdip, Kristal Iocare Post, KiwiDip, Superdip Excel, Ioguard RTU, Shepherd’s IoSpray 50
Authorisation number EU-0020125-0006 1-2
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,5
C9-11 Alcohol Ethoxylate C 9-11 alcohol with 6 moles of ethoxylate. Various brand names available including Imbentin C-91-060 Non-active substance 68439-46-3 614-482-0 0,56
 7.3. 

Trade name(s) LuxDip 50B, Postguard
Authorisation number EU-0020125-0007 1-2
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,5
 7.4. 

Trade name(s) LuxDip 25, Kote It, Corston Barracide Post Film Forming Dip, Pro-Tect, Kristal Iocare Film, Coars Iodinegel, Coars Iodogel, LuxDip 20B
Authorisation number EU-0020125-0008 1-2
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,25
C9-11 Alcohol Ethoxylate C 9-11 alcohol with 6 moles of ethoxylate. Various brand names available including Imbentin C-91-060 Non-active substance 68439-46-3 614-482-0 0,5
 1.  1.1. 

Identifier Meta SPC 3 — RTU Products — Professiona RTU Liquid for application pre and post milking (LuxSpray 15)
 1.2. 

Number 1-3
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,16 0,16
C9-11 Alcohol Ethoxylate C 9-11 alcohol with 6 moles of ethoxylate. Various brand names available including Imbentin C-91-060 Non-active substance 68439-46-3 614-482-0 0.166 0.166
 2.2. 

Formulation(s) AL — Any other liquid
 3. 

Hazard statements May be corrosive to metals.
Precautionary statements Avoid release to the environment.Collect spillage.Dispose of contents in accordance with local regulations.Dispose of container in accordance with local regulations.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: dip treatmentApplication via dip Cup: Using a traditional dip cup with non-return valves, dispense RTU product into the reservoir. Screw down the applicator portion. Squeeze the reservoir to fill the applicator. Cover the bottom two thirds of each teat with material. Dispose of unused material after each milkingThe same solution can be applied to multiple animals during the same milking session.
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation. In use concentration 0,16 % (w/w) iodine.2 pre milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.1.1. 
See general directions for use.
 4.1.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for post milking disinfection
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: spray treatmentApplication via pneumatic sprayer: Uptake lance of spray system is placed in the container of the RTU product. The RTU product is then pumped to a spray lance located in the milking parlour. The spray lance is then used to cover the bottom two thirds of teats in the RTU productApplication via manual trigger spray: Fill trigger spray bottle with RTU product. Use trigger spray to cover the bottom two thirds of each teat with RTU product
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation In use concentration 0,16 % (w/w) iodine.2 pre milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.2.1. 
See general directions for use.
 4.2.2. 
Wear protective chemical resistant gloves when applying the product by manual spraying (glove material to be specified by the authorisation holder within the product information)

In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for post milking disinfection
 4.2.3. 
See general directions for use.
 4.2.4. 
See general directions for use.
 4.2.5. 
See general directions for use.
 4.3. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: dip treatmentApplication via foaming Dip cup: As for dip cup, however, when squeezed, the liquid is forced through a fine mesh, mixing with air and forming foam. This is then applied to the bottom two thirds of the cow’s udderThe same solution can be applied to multiple animals during the same milking session.
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation In use concentration 0,16 % (w/w) iodine.2 pre milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.3.1. 
See general directions for use.
 4.3.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for post milking disinfection
 4.3.3. 
See general directions for use.
 4.3.4. 
See general directions for use.
 4.3.5. 
See general directions for use.
 4.4. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: dip treatmentApplication via dip Cup: Using a traditional dip cup with non-return valves, dispense RTU product into the reservoir. Screw down the applicator portion. Squeeze the reservoir to fill the applicator. Cover the bottom two thirds of each teat with material. Dispose of unused material after each milkingThe same solution can be applied to multiple animals during the same milking session.
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation In use concentration 0,16 % (w/w) iodine.2 post milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.4.1. 
Dip at least 2/3 of the teat length with diluted product immediately after milking

To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes).
 4.4.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre milking disinfection
 4.4.3. 
See general directions for use.
 4.4.4. 
See general directions for use.
 4.4.5. 
See general directions for use.
 4.5. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastAll
Field(s) of use Indoor
Application method(s) Open system: spray treatmentApplication via pneumatic sprayer: Uptake lance of spray system is placed in the container of the RTU product. The RTU product is then pumped to a spray lance located in the milking parlour. The spray lance is then used to cover the bottom two thirds of teats in the RTU productApplication via manual trigger spray: Fill trigger spray bottle with RTU product. Use trigger spray to cover the bottom two thirds of each teat with RTU product
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation In use concentration 0,16 % (w/w) iodine.2 post milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.5.1. 
Spray at least 2/3 of the teat length with RTU product immediately after milking

To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes).
 4.5.2. 
Wear protective chemical resistant gloves and boots when applying the product by manual spraying (glove material to be specified by the authorisation holder within the product information)

A protective coverall (at least type 6, EN 13034) shall be worn

In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre milking disinfection
 4.5.3. 
See general directions for use.
 4.5.4. 
See general directions for use.
 4.5.5. 
See general directions for use.
 4.6. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: dip treatmentApplication via foaming Dip cup: As for dip cup, however, when squeezed, the liquid is forced through a fine mesh, mixing with air and forming foam. This is then applied to the bottom two thirds of the cow’s udderThe same solution can be applied to multiple animals during the same milking session.
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation In use concentration 0,16 % (w/w) iodine.2 post milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.6.1. 
Dip at least 2/3 of the teat length with RTU product immediately after milking

To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes).
 4.6.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre milking disinfection
 4.6.3. 
See general directions for use.
 4.6.4. 
See general directions for use.
 4.6.5. 
See general directions for use.
 4.7. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: dip treatmentApplication via dip Cup: Using a traditional dip cup with non-return valves, dispense RTU product into the reservoir. Screw down the applicator portion. Squeeze the reservoir to fill the applicator. Cover the bottom two thirds of each teat with material. Dispose of unused material after each milkingThe same solution can be applied to multiple animals during the same milking session.
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation In use concentration 0,16 % (w/w) iodine.2 pre milking applications per animal, per day2 post milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.7.1. 
Post milking:

Dip at least 2/3 of the teat length with RTU product immediately after milking

To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes).
 4.7.2. 
Wear protective chemical resistant gloves when applying the product by dipping (glove material to be specified by the authorisation holder within the product information).

This product can be used for pre- and post-milking disinfection in combination. However, it should not be used in combination with a different iodine-based product.
 4.7.3. 
See general directions for use.
 4.7.4. 
See general directions for use.
 4.7.5. 
See general directions for use.
 4.8. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: spray treatmentApplication via pneumatic sprayer: Uptake lance of spray system is placed in the container of the RTU product. The RTU product is then pumped to a spray lance located in the milking parlour. The spray lance is then used to cover the bottom two thirds of teats in the RTU productApplication via manual trigger spray: Fill trigger spray bottle with RTU product. Use trigger spray to cover the bottom two thirds of each teat with RTU product
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation In use concentration 0,16 % (w/w) iodine.2 pre milking applications per animal, per day2 post milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.8.1. 
Post milking:

Spray at least 2/3 of the teat length with RTU product immediately after milking

To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes).
 4.8.2. 
Wear protective chemical resistant gloves and boots when applying the product by manual spraying (glove material to be specified by the authorisation holder within the product information)

A protective coverall (at least type 6, EN 13034) shall be worn

This product can be used for pre- and post-milking disinfection in combination. However, it should not be used in combination with a different iodine-based product.
 4.8.3. 
See general directions for use.
 4.8.4. 
See general directions for use.
 4.8.5. 
See general directions for use.
 4.9. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use Indoor
Application method(s) Open system: dip treatmentApplication via foaming Dip cup: As for dip cup, however, when squeezed, the liquid is forced through a fine mesh, mixing with air and forming foam. This is then applied to the bottom two thirds of the cow’s udderThe same solution can be applied to multiple animals during the same milking session.
Application rate(s) and frequency Quantity of RTU product to be applied per application:
— cows and buffaloes: 3 to 10ml (5 ml recommended)
— sheep 1,5 to 5 ml (1,5 ml recommended)
— goats 2,5 to 6 ml (2,5 ml recommended)Ready to use formulation In use concentration 0,16 % (w/w) iodine.2 pre milking applications per animal, per day2 post milking applications per animal, per day
Category(ies) of users Trained professionalProfessional
Pack sizes and packaging material Drum, Plastic: HDPE, 10 lDrum, Plastic: HDPE, 20 lDrum, Plastic: HDPE, 25 lDrum, Plastic: HDPE, 200 lIBC (intermediate bulk container), Plastic: HDPE, 1000 lDrum, Plastic: HDPE, 5 lAll drums excepting 200 l (200 kg) and 1000 l (1000 kg) could be either silver or natural (white translucent) in colour. 200 l (200 kg) drums are either silver or blue in colour. IBCs are natural coloured.All drums are capped with tamper evident caps or bungs and are UN certified.
 4.9.1. 
Post milking:

Dip at least 2/3 of the teat length with RTU product immediately after milking

To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the cows standing at least 5 minutes).
 4.9.2. 
Wear protective chemical resistant gloves when applying the product by foaming application method

(glove material to be specified by the authorisation holder within the product information).

This product can be used for pre- and post-milking disinfection in combination. However, it should not be used in combination with a different iodine-based product.
 4.9.3. 
See general directions for use.
 4.9.4. 
See general directions for use.
 4.9.5. 
See general directions for use.
 5.  5.1. 
Keep out of reach of children

Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

Product can be used during the entire lactation period

Before attaching the milking cluster, all teat-dip residues should be removed with either a single use towel or re-usable cloth. One cloth should be used per cow

For effective use against bacteria and yeast, product must be left in contact with the skin for at least 60 seconds
 5.2. 
See use specific risk mitigation measures.
 5.3. 
Remove and wash contaminated clothing before re-use.

After inhalation: Move to fresh air in case of accidental inhalation of fumes from overheating or combustion.

If you feel unwell, seek medical advice.

After contact with skin: Wash with water and soap as a precaution. Consult a doctor if skin irritation persists.

After contact with eyes: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical treatment by eye specialist.

After ingestion: Rinse out mouth and give plenty of water to drink. Never give anything by mouth to an unconscious person. Consult a physician.

Large spills should be contained using a chemical spill kit, soaked up using absorbent material such as kieselguhr and disposed of as hazardous waste.
 5.4. 
At the end of the treatment, dispose of unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual farm based waste water treatment plant.
 5.5. 
Protect from frost

Do not store at temperatures above 30 °C

Shelf life 12 months
 6.  7.  7.1. 

Trade name(s) LuxSpray 15 — Priodine RTU/Kristal Iocare Pre/Super Pre
Authorisation number EU-0020125-0009 1-3
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,16
C9-11 Alcohol Ethoxylate C 9-11 alcohol with 6 moles of ethoxylate. Various brand names available including Imbentin C-91-060 Non-active substance 68439-46-3 614-482-0 0,166
