
Article 1 
A Union authorisation with authorisation number EU-0023656-0000 is granted to Schuelke & Mayr GmbH for the making available on the market and use of the biocidal product family ‘perform-IPA’ in accordance with the summary of the biocidal product characteristics set out in the Annex.
The Union authorisation is valid from 27 December 2020 until 30 November 2030.
Article 2 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 27 November 2020.
For the Commission
The President
Ursula VON DER LEYEN
ANNEX
perform-IPA
Product type 2 – Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Product type 4 – Food and feed area (Disinfectants)
Authorisation number: EU-0023656-0000
R4BP asset number: EU-0023656-0000

PART I
1.  1.1. 

Name perform-IPA
 1.2. 

Product type(s) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)PT04 - Food and feed area (Disinfectants)
 1.3. 

Name and address of the authorisation holder Name Schülke & Mayr GmbH
Address Robert-Koch-Str. 2, 22851 Norderstedt, Germany
Authorisation number EU-0023656-0000
R4BP asset number EU-0023656-0000
Date of the authorisation 27 December 2020
Expiry date of the authorisation 30 November 2030
 1.4. 

Name of manufacturer Schülke & Mayr GmbH
Address of manufacturer Robert-Koch-Str. 2, 22851 Norderstedt, Germany
Location of manufacturing sites Robert-Koch-Str. 2, 22851 Norderstedt, Germany


Name of manufacturer BOCHEMIE a.s.
Address of manufacturer Lidická 326, 735 95 Bohumín Czech Republic
Location of manufacturing sites Lidická 326, 735 95 Bohumín Czech Republic


Name of manufacturer Imeco
Address of manufacturer Boschstr. 5, 63768 Hösbach Germany
Location of manufacturing sites Boschstr. 5, 63768 Hösbach GermanyNeue Straße 2-4, 09471 Köningswalde Germany


Name of manufacturer Tristel Solutions Limited
Address of manufacturer Lynx Business Park, Fordham Road, Snailwell, CB8 7NY Cambridgeshire United Kingdom
Location of manufacturing sites Lynx Business Park, Fordham Road, Snailwell, CB8 7NY Cambridgeshire United Kingdom


Name of manufacturer Techtex
Address of manufacturer Units 7&8 Rhodes Bus. Park Silburn Way, M24 4NE Middleton United Kingdom
Location of manufacturing sites Units 7&8 Rhodes Bus. Park Silburn Way, M24 4NE Middleton United Kingdom


Name of manufacturer A.F.P. GmbH
Address of manufacturer Otto Brenner Straße 16, 21337 Lüneburg Germany
Location of manufacturing sites Otto Brenner Straße 16, 21337 Lüneburg Germany


Name of manufacturer Innovate GmbH
Address of manufacturer Am Hohen Stein 11, 06618 Naumburg (Saale) Germany
Location of manufacturing sites Am Hohen Stein 11, 06618 Naumburg (Saale) Germany


Name of manufacturer Lysoform Dr. Hans Rosemann GmbH
Address of manufacturer Kaiser-Wilhelm-Straße 133, 12247 Berlin Germany
Location of manufacturing sites Kaiser-Wilhelm-Straße 133, 12247 Berlin Germany


Name of manufacturer Sterisol AB
Address of manufacturer Kronoängsgatan 3, 592 23 Vadstena Sweden
Location of manufacturing sites Kronoängsgatan 3, 592 23 Vadstena Sweden


Name of manufacturer Rudolf Dankwardt GmbH
Address of manufacturer Gutenbergring 50-52, 22848 Norderstedt Germany
Location of manufacturing sites Gutenbergring 50-52, 22848 Norderstedt GermanyLagerstr. 15, 19249 Jessenitz - Werk / Lübtheen Germany
 1.5. 

Active substance Propan-2-ol
Name of manufacturer Ineos Solvents Germany GmbH (formerly Sasol)
Address of manufacturer Römerstraße 733, 47443 Moers Germany
Location of manufacturing sites Römerstraße 733, 47443 Moers GermanyShamrockstr. 88, 44643 Herne Germany


Active substance Propan-2-ol
Name of manufacturer Shell Chemicals Europe B.V.
Address of manufacturer Postbus 2334, 3000 CH Rotterdam Netherlands
Location of manufacturing sites Shell Nederland Raffinaderij B.V., Vondelingenweg 601, 3196 KK Rotterdam-Pernis Netherlands

2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1 63,1
 2.2. 

Formulation(s) Any other liquid (AL), ready-to-useAny other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation

PART II 1.  1.1. 

Identifier meta SPC 1 perform IPA liquid
 1.2. 

Number 1-1
 1.3. 

Product type(s) PT04 - Food and feed area (Disinfectants)PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1 63,1
 2.2. 

Formulation(s) Any other liquid (AL), ready-to-use
 3. 

Hazard statements Highly flammable liquid and vapour.Causes serious eye irritation.May cause drowsiness or dizziness.Repeated exposure may cause skin dryness or cracking.
Precautionary statements Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. - No smoking.Keep container tightly closed.Ground and bond container and receiving equipment.Use explosion-proof electrical/ventilating/lighting equipment.Use non-sparking tools.Take action to prevent static discharges.Avoid breathing vapours.Avoid breathing spray.Use only outdoors or in a well-ventilated area.Wear eye protection.IF IN EYES:Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Call a POISON CENTER or doctor if you feel unwell.If eye irritation persists: Get medical advice.If eye irritation persists: Get medical attention.In case of fire:Use alcohol-resistant foam, carbon dioxide or water mist to extinguish.Store in a well-ventilated place. Keep cool.Store locked up.Dispose of contents to /container to an approved waste disposal plant.
 4.  4.1. 

Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: BacteriaCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B)
Application method(s) SprayingProduct will be sprayed directly on the surface
Application rate(s) and frequency Ready-to-use. Do not apply more than 25 ml/m2.Disinfection after each production and cleaning process or when required according to standard operating procedure (SOP)
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Bottle: 250-1000 mlpackaging material: high-density polyethylene (HDPE), surlyn/polypropylene (PP)closure material is either: PP, polyoxymethylene (POM), low-density polyethylene (LDPE), HDPE, polyethylene (PE), ethylene-vinyl acetate (EVA), stainless steel, polybutylene terephthalate (PBT), (LD)PE, exp. polytetrafluoroethylene (PTFE), linear low density polyethylene (LLDPE), expanded PE (EXPPE), Co Polymer PPcanister: 5-10 Lpackaging material: HDPE.closure material is either: HDPE/LDPERevolver BAG: 1 Lpackaging material: EVAclosure material: PP/Silicone/EVA
 4.1.1. 
Spray ready-to-use product on the surface and allow to take effect at room temperature (20± 2°C) for at least 1 minute.
 4.1.2. 
The following personal risk mitigation measure can be applied for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product.
 4.1.3. 
See general directions for use.
 4.1.4. 
-
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: BacteriaCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B)
Application method(s) WipingProduct will be sprayed or poured on the surface and wiped afterwards or the wipe will be wetted by spraying or pouring with the product and thereafter the product should be wiped on the surface.
Application rate(s) and frequency Ready-to-use. Do not apply more than 25 ml/m2.Disinfection after each production and cleaning process or when required according to SOP.
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Bottle: 250-1000 mlpackaging material: HDPE, surlyn/PPclosure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP.canister: 5-10 Lpackaging material: HDPE.closure material is either: HDPE/LDPERevolver BAG: 1 Lpackaging material: EVAclosure material: PP/Silicone/EVA.
 4.2.1. 
Spray or pour ready-to-use product on the surface and wipe afterwards or wet a wipe with the ready-to-use product by spraying or pouring and thereafter wipe the surface. Allow to take effect for at least 5 minutes at room temperature (20± 2°C).
 4.2.2. 
The following personal risk mitigation measure can be applied for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product.
 4.2.3. 
See general directions for use.
 4.2.4. 
-
 4.2.5. 
See general directions for use.
 4.3. 

Product type PT04 - Food and feed area (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: BacteriaCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -Scientific name: VirusesCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B)
Application method(s) SprayingProduct will be sprayed directly on the surface.
Application rate(s) and frequency Ready-to-use. Do not apply more than 25 ml/m2.Disinfection after each production and cleaning process or when required according to SOP.
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Bottle: 250-1000 mlpackaging material: HDPE, surlyn/PPclosure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP.canister: 5-10 Lpackaging material: HDPE.closure material is either: HDPE/LDPERevolver BAG: 1 Lpackaging material: EVAclosure material: PP/Silicone/EVA.
 4.3.1. 
Spray ready-to-use product on the surface and allow to take effect at room temperature (20± 2°C) for at least 1 (bactericidal and yeasticidal activity) or 2 minutes (virucidal activity).
 4.3.2. 
The following personal risk mitigation measure can be applied for disinfection of food processing machinery and for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product.
 4.3.3. 
See general directions for use.
 4.3.4. 
-
 4.3.5. 
See general directions for use.
 4.4. 

Product type PT04 - Food and feed area (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: BacteriaCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -Scientific name: VirusesCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B)
Application method(s) WipingProduct will be sprayed or poured on the surface and wiped afterwards or the wipe will be wetted by spraying or pouring with the product and thereafter the product should be wiped on the surface.
Application rate(s) and frequency Ready-to-use. Do not apply more than 25 ml/m2.Disinfection after each production and cleaning process or when required according to SOP.
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Bottle: 250-1000 mlpackaging material: HDPE, surlyn/PPclosure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP.canister: 5-10 Lpackaging material: HDPE.closure material is either: HDPE/LDPERevolver BAG: 1 Lpackaging material: EVAclosure material: PP/Silicone/EVA.
 4.4.1. 
Spray ready-to-use product on the surface and wipe afterwards or wet a wipe with the ready-to-use product by spraying or pouring and thereafter wipe the surface. Allow to take effect for at least 5 minutes at room temperature (20± 2°C).
 4.4.2. 
The following personal risk mitigation measure can be applied for disinfection of food processing machinery and for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product.
 4.4.3. 
See general directions for use.
 4.4.4. 
-
 4.4.5. 
See general directions for use.
 5.  5.1. 
Clean the surface carefully before use.

Remove excess water from the surface before disinfection, if appropriate.

Do not apply more than 25 ml/m2.

Make sure to wet surfaces completely.

Used wipes must be disposed in a closed container.
 5.2. 
The product must only be applied for disinfection of small surfaces.

Ensure adequate ventilation to prevent the formation of explosive atmospheres.

Avoid contact with eyes.

Apply a funnel for refilling.

Keep out of reach of children and pets.

Keep children and pets away from rooms where disinfection is taking place. Provide adequate ventilation before children and pets enter treated rooms. This does not apply to hospital patient rooms.
 5.3. 
First aid:


 In case of accident: Call a poison centre or a doctor.
 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
 If on skin: Wash with water. If skin irritation occurs: Get medical advice.
 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
 5.4. 
-
 5.5. 
Shelf-life: 36 months

Keep container tightly closed.

Store in a well-ventilated place.

Protect from sunlight.

Store at room temperature in the original container.
 6. 
The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
 7.  7.1. 

Trade name(s) perform® sterile alcohol IPAperform® classic alcohol IPAburaton® IPAperform® advanced alcohol IPAarcana® IPAclear IPApure IPAdisinfectant IPASurface disinfection liquid classicsterile IPAmikrozid® sterile liquidSurface disinfection liquid sterileBTS 6000
Authorisation number EU-0023656-0001 1-1
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1
 1.  1.1. 

Identifier meta SPC 2 perform wipes IPA
 1.2. 

Number 1-2
 1.3. 

Product type(s) PT04 - Food and feed area (Disinfectants)PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1 63,1
 2.2. 

Formulation(s) Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation
 3. 

Hazard statements Highly flammable liquid and vapour.Causes serious eye irritation.May cause drowsiness or dizziness.Repeated exposure may cause skin dryness or cracking.
Precautionary statements Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. - No smoking.Keep container tightly closed.Ground and bond container and receiving equipment.Use explosion-proof electrical/ventilating/lighting equipment.Use non-sparking tools.Take action to prevent static discharges.Avoid breathing vapours.Avoid breathing spray.Use only outdoors or in a well-ventilated area.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing.Call a POISON CENTER or doctor if you feel unwell.If eye irritation persists: Get medical advice.If eye irritation persists: Get medical attention.In case of fire: Use alcohol-resistant foam, carbon dioxide or water mist to extinguish.Store in a well-ventilated place. Keep cool.Store locked up.Dispose of contents /container to an approved waste disposal plant.
 4.  4.1. 

Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: BacteriaCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B)
Application method(s) WipingProduct will be wiped directly on the surface.
Application rate(s) and frequency Ready-to-use wipesDisinfection after each production and cleaning process or when required according to SOP.
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Soft pack: 1-200 wipesPackaging material: LDPE/Alu/PET; LDPE/PET; biaxially oriented polypropylene (BOPP) + cast polypropylene (CPP)Pouch: 10-200 wipesPackaging material: LDPE/PETTube: 50-200 wipesPackaging material: HDPEclosure material is either PP, PE3385
 4.1.1. 
Thoroughly wipe the surface with the wipe and allow to take effect for at least 5 minutes at room temperature (20±2°C).
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
-
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT04 - Food and feed area (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: BacteriaCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -Scientific name: VirusesCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B)
Application method(s) WipingProduct will be wiped directly on the surface.
Application rate(s) and frequency Ready-to-use wipesDisinfection after each production and cleaning process or when required according to SOP.
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Soft pack: 1-200 wipesPackaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPPPouch: 10-200 wipesPackaging material: LDPE/PETTube: 50-200 wipesPackaging material: HDPEclosure material is either PP, PE3385
 4.2.1. 
Thoroughly wipe the surface with the wipe and allow to take effect for at least 5 minutes at room temperature (20± 2°C).
 4.2.2. 
See general directions for use.
 4.2.3. 
See general directions for use.
 4.2.4. 
-
 4.2.5. 
See general directions for use.
 5.  5.1. 
Clean the surface carefully before use.

Remove excess water from the surface before disinfection, if appropriate.

Make sure to wet surfaces completely.

Used wipes must be disposed in a closed container.
 5.2. 
The product must only be applied for disinfection of small surfaces.

Ensure adequate ventilation to prevent the formation of explosive atmospheres.

Avoid contact with eyes.

Keep out of reach of children and pets.

Keep children and pets away from rooms where disinfection is taking place. Provide adequate ventilation before children and pets enter treated rooms. This does not apply to hospital patient rooms.
 5.3. 
First aid:


 In case of accident: Call a poison centre or a doctor.
 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
 If on skin: Wash with water. If skin irritation occurs: Get medical advice.
 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
 5.4. 
-
 5.5. 
Shelf-life: 24 months

Keep container tightly closed.

Store in a well-ventilated place.

Protect from sunlight.

Store at room temperature in the original container.
 6. 
The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
 7.  7.1. 

Trade name(s) perform classic wipes IPAburaton® wipes IPAperform® advanced wipes IPAarcana® wipes IPAclear IPA wipespure IPA wipesdisinfectant IPA wipesSurface disinfection wipes classicperform® sterile wipes IPAsterile IPA wipesmikrozid® sterile wipesSurface disinfection wipes sterile
Authorisation number EU-0023656-0002 1-2
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1
 1.  1.1. 

Identifier meta SPC 3 mikrozid liquid
 1.2. 

Number 1-3
 1.3. 

Product type(s) PT04 - Food and feed area (Disinfectants)PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1 63,1
 2.2. 

Formulation(s) Any other liquid (AL), ready-to-use
 3. 

Hazard statements Highly flammable liquid and vapour.Causes serious eye irritation.May cause drowsiness or dizziness.Repeated exposure may cause skin dryness or cracking.
Precautionary statements Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.Keep container tightly closed.Ground and bond container and receiving equipment.Use explosion-proof electrical/ventilating/lighting equipment.Use non-sparking tools.Take action to prevent static discharges.Avoid breathing vapours.Avoid breathing spray.Use only outdoors or in a well-ventilated area.Wear eye protection.IF IN EYES:Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Call a POISON CENTER or doctor if you feel unwell.If eye irritation persists: Get medical advice.If eye irritation persists: Get medical attention.In case of fire: Use alcohol-resistant foam, carbon dioxide or water mist to extinguish.Store in a well-ventilated place. Keep cool.Store locked up.Dispose of contents /container to an approved waste disposal plant.
 4.  4.1. 

Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosisCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B)
Application method(s) SprayingProduct will be sprayed directly on the surface
Application rate(s) and frequency Ready-to-use. Do not apply more than 25 ml/m2.Disinfection when required according to SOP.
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Bottle: 250-1000 mlpackaging material: HDPE, surlyn/PPclosure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PPcanister: 5-10 Lpackaging material: HDPE.closure material is either: HDPE/LDPERevolver BAG: 1 Lpackaging material: EVAClosure : PP/Silicone/EVA
 4.1.1. 
Spray ready-to-use product on the surface and allow to take effect at room temperature (20± 2°C) for at least 1 minute.
 4.1.2. 
The following personal risk mitigation measure can be applied for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product.
 4.1.3. 
See general directions for use.
 4.1.4. 
-
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosisCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B)
Application method(s) WipingProduct will be sprayed or poured on the surface and wiped afterwards or the wipe will be wetted by spraying or pouring with the product and thereafter the product should be wiped on the surface.
Application rate(s) and frequency Ready-to-use. Do not apply more than 25 ml/m2.Disinfection when required according to SOP.
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Bottle: 250-1000 mlpackaging material: HDPE, surlyn/PPclosure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PPcanister: 5-10 Lpackaging material: HDPE.closure material is either: HDPE/LDPERevolver BAG: 1 Lpackaging material: EVAClosure : PP/Silicone/EVA
 4.2.1. 
Spray or pour rready-to-use product on the surface and wipe afterwards or wet a wipe with the ready-to-use product by spraying or pouring and thereafter wipe the surface. Allow to take effect for at least 5 minutes at room temperature (20± 2°C).
 4.2.2. 
The following personal risk mitigation measure can be applied for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product.
 4.2.3. 
See general directions for use.
 4.2.4. 
-
 4.2.5. 
See general directions for use.
 4.3. 

Product type PT04 - Food and feed area (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosisCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -Scientific name: VirusesCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B)
Application method(s) SprayingProduct will be sprayed directly on the surface.
Application rate(s) and frequency Ready-to-use. Do not apply more than 25 ml/m2.Disinfection when required according to SOP.
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Bottle: 250-1000 mlpackaging material: HDPE, surlyn/PPclosure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PPcanister: 5-10 Lpackaging material: HDPE.closure material is either: HDPE/LDPERevolver BAG: 1 Lpackaging material: EVAClosure : PP/Silicone/EVA
 4.3.1. 
Spray ready-to-use product on the surface and allow to take effect at room temperature (20± 2°C) for at least 1 (bactericidal and yeasticidal activity) or 2 minutes (virucidal activity).
 4.3.2. 
The following personal risk mitigation measure can be applied for disinfection of food processing machinery and for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product.
 4.3.3. 
See general directions for use.
 4.3.4. 
-
 4.3.5. 
See general directions for use.
 4.4. 

Product type PT04 - Food and feed area (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosisCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -Scientific name: VirusesCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B)
Application method(s) WipingProduct will be sprayed or poured on the surface and wiped afterwards or the wipe will be wetted by spraying or pouring with the product and thereafter the product should be wiped on surface.
Application rate(s) and frequency Ready-to-use. Do not apply more than 25 ml/m2.Disinfection when required according to SOP.
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Bottle: 250-1000 mlpackaging material: HDPE, surlyn/PPclosure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PPcanister: 5-10 Lpackaging material: HDPE.closure material is either: HDPE/LDPERevolver BAG: 1 Lpackaging material: EVAclosure material: PP/Silicone/EVA
 4.4.1. 
Spray or pour ready-to-use product on the surface and wipe afterwards or wet a wipe with the ready-to-use product by spraying or pouring and thereafter wipe the surface. Allow to take effect for at least 5 minutes at room temperature (20± 2°C).
 4.4.2. 
The following personal risk mitigation measure can be applied for disinfection of food processing machinery and for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product.
 4.4.3. 
See general directions for use.
 4.4.4. 
-
 4.4.5. 
See general directions for use.
 5.  5.1. 
Clean the surface carefully before use.

Remove excess water from the surface before disinfection, if appropriate.

Do not apply more than 25 ml/m2.

Make sure to wet surfaces completely.

Used wipes must be disposed in a closed container.
 5.2. 
The product must only be applied for disinfection of small surfaces.

Ensure adequate ventilation to prevent the formation of explosive atmospheres.

Avoid contact with eyes.

Apply a funnel for refilling.

Keep out of reach of children and pets.

Keep children and pets away from rooms where disinfection is taking place. Provide adequate ventilation before children and pets enter treated rooms. This does not apply to hospital patient rooms.
 5.3. 
First aid:


 In case of accident: Call a poison centre or a doctor.
 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
 If on skin: Wash with water. If skin irritation occurs: Get medical advice.
 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
 5.4. 
-
 5.5. 
Shelf-life: 36 months

Keep container tightly closed.

Store in a well-ventilated place.

Protect from sunlight.

Store at room temperature in the original container.
 6. 
The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
 7.  7.1. 

Trade name(s) mikrozid® classic liquidmikrozid® IPA liquidSurface Disinfection liquid pure
Authorisation number EU-0023656-0003 1-3
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1
 1.  1.1. 

Identifier meta SPC 4 mikrozid wipes
 1.2. 

Number 1-4
 1.3. 

Product type(s) PT04 - Food and feed area (Disinfectants)PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1 63,1
 2.2. 

Formulation(s) Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation
 3. 

Hazard statements Highly flammable liquid and vapour.Causes serious eye irritation.May cause drowsiness or dizziness.Repeated exposure may cause skin dryness or cracking.
Precautionary statements Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.Keep container tightly closed.Ground and bond container and receiving equipment.Use explosion-proof electrical/ventilating/lighting equipment.Use non-sparking tools.Take action to prevent static discharges.Avoid breathing vapours.Avoid breathing spray.Use only outdoors or in a well-ventilated area.Wear eye protection.IF IN EYES:Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing.Call a POISON CENTER or doctor if you feel unwell.If eye irritation persists: Get medical advice.If eye irritation persists: Get medical attention.In case of fire: Use alcohol-resistant foam, carbon dioxide or water mist to extinguish.Store in a well-ventilated place. Keep cool.Store locked up.Dispose of contents /container to an approved waste disposal plant.
 4.  4.1. 

Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosisCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B)
Application method(s) WipingProduct will be wiped directly on the surface.
Application rate(s) and frequency Ready-to-use wipesDisinfection when required according to SOP.
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Soft pack: 1-200 wipesPackaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPPPouch: 10-200 wipesPackaging material: LDPE/PETTube: 50-200 wipesPackaging material: HDPEclosure material is either PP, PE3385
 4.1.1. 
Thoroughly wipe the surface with the wipe and allow to take effect for at least 5 minutes at room temperature (20± 2°C).
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
-
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT04 - Food and feed area (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosisCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -Scientific name: VirusesCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B)
Application method(s) WipingProduct will be wiped directly on the surface.
Application rate(s) and frequency Ready-to-use wipesDisinfection when required according to SOP.
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Soft pack: 1-200 wipesPackaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPPPouch: 10-200 wipesPackaging material: LDPE/PETTube: 50-200 wipesPackaging material: HDPEclosure material is either PP, PE3385
 4.2.1. 
Thoroughly wipe the surface with the wipe and allow to take effect for at least 5 minutes at room temperature (20± 2°C).
 4.2.2. 
See general directions for use.
 4.2.3. 
See general directions for use.
 4.2.4. 
-
 4.2.5. 
See general directions for use.
 5.  5.1. 
Clean the surface carefully before use.

Remove excess water from the surface before disinfection, if appropriate.

Make sure to wet surfaces completely.

Used wipes must be disposed in a closed container.
 5.2. 
The product must only be applied for disinfection of small surfaces.

Ensure adequate ventilation to prevent the formation of explosive atmospheres.

Avoid contact with eyes.

Keep out of reach of children and pets.

Keep children and pets away from rooms where disinfection is taking place. Provide adequate ventilation before children and pets enter treated rooms. This does not apply to hospital patient rooms.
 5.3. 
First aid:


 In case of accident: Call a poison centre or a doctor.
 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
 If on skin: Wash with water. If skin irritation occurs: Get medical advice.
 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
 5.4. 
-
 5.5. 
Shelf-life: 24 months

Keep container tightly closed.

Store in a well-ventilated place.

Protect from sunlight.

Store at room temperature in the original container.
 6. 
The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
 7.  7.1. 

Trade name(s) mikrozid® classic wipesmikrozid® IPA wipessurface disinfection wipes classic
Authorisation number EU-0023656-0004 1-4
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1
 1.  1.1. 

Identifier meta SPC 5 kodan wipes IPA pro
 1.2. 

Number 1-5
 1.3. 

Product type(s) PT04 - Food and feed area (Disinfectants)PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1 63,1
 2.2. 

Formulation(s) Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation
 3. 

Hazard statements Highly flammable liquid and vapour.Causes serious eye irritation.May cause drowsiness or dizziness.Repeated exposure may cause skin dryness or cracking.
Precautionary statements Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.Keep container tightly closed.Ground and bond container and receiving equipment.Use explosion-proof electrical/ventilating/lighting equipment.Use non-sparking tools.Take action to prevent static discharges.Avoid breathing vapours.Avoid breathing spray.Use only outdoors or in a well-ventilated area.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing.Call a POISON CENTER or doctor if you feel unwell.If eye irritation persists: Get medical advice.If eye irritation persists: Get medical attention.In case of fire:Use alcohol-resistant foam, carbon dioxide or water mist to extinguish.Store in a well-ventilated place. Keep cool.Store locked up.Dispose of contents /container to an approved waste disposal plant.
 4.  4.1. 

Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosisCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B)
Application method(s) WipingProduct will be wiped directly on the surface.
Application rate(s) and frequency Ready-to-use wipes
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Soft pack: 1-200 wipesPackaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPPPouch: 10-200 wipesPackaging material: LDPE/PETTube: 50-200 wipesPackaging material: HDPEclosure material is either PP, PE3385
 4.1.1. 
Thoroughly wipe the surface with the wipe and allow to take effect for at least 5 minutes at room temperature (20± 2°C).
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
-
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT04 - Food and feed area (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosisCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -Scientific name: VirusesCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B)
Application method(s) WipingProduct will be wiped directly on the surface.
Application rate(s) and frequency Ready-to-use wipes
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Soft pack: 1-200 wipesPackaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPPPouch: 10-200 wipesPackaging material: LDPE/PETTube: 50-200 wipesPackaging material: HDPEclosure material is either PP, PE3385
 4.2.1. 
Thoroughly wipe the surface with the wipe and allow to take effect for at least 5 minutes at room temperature (20± 2°C).
 4.2.2. 
See general directions for use.
 4.2.3. 
See general directions for use.
 4.2.4. 
-
 4.2.5. 
See general directions for use.
 5.  5.1. 
Clean the surface carefully before use.

Remove excess water from the surface before disinfection, if appropriate.

Make sure to wet surfaces completely.

Used wipes must be disposed in a closed container.
 5.2. 
The product must only be applied for disinfection of small surfaces.

Ensure adequate ventilation to prevent the formation of explosive atmospheres.

Avoid contact with eyes.

Keep out of reach of children and pets.

Keep children and pets away from rooms where disinfection is taking place. Provide adequate ventilation before children and pets enter treated rooms. This does not apply to hospital patient rooms.
 5.3. 
First aid:


 In case of accident: Call a poison centre or a doctor.
 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
 If on skin: Wash with water. If skin irritation occurs: Get medical advice.
 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
 5.4. 
-
 5.5. 
Shelf-life: 24 months

Keep container tightly closed.

Store in a well-ventilated place.

Protect from sunlight.

Store at room temperature in the original container.
 6. 
The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
 7.  7.1. 

Trade name(s) kodan® wipes pureschülke® classic wipes
Authorisation number EU-0023656-0005 1-5
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1
 1.  1.1. 

Identifier meta SPC 6 kodan wipes IPA
 1.2. 

Number 1-6
 1.3. 

Product type(s) PT04 - Food and feed area (Disinfectants)PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1 63,1
 2.2. 

Formulation(s) Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation
 3. 

Hazard statements Highly flammable liquid and vapour.Causes serious eye irritation.May cause drowsiness or dizziness.Repeated exposure may cause skin dryness or cracking.
Precautionary statements If medical advice is needed, have product container or label at hand.Keep out of reach of children.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.Keep container tightly closed.Ground and bond container and receiving equipment.Use explosion-proof electrical/ventilating/lighting equipment.Use non-sparking tools.Take action to prevent static discharges.Avoid breathing vapours.Avoid breathing spray.Use only outdoors or in a well-ventilated area.IF INHALED: Remove person to fresh air and keep comfortable for breathing.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Call a POISON CENTER or doctor if you feel unwell.If eye irritation persists: Get medical advice.If eye irritation persists: Get medical attention.In case of fire: Use alcohol-resistant foam, carbon dioxide or water mist to extinguish.Store in a well-ventilated place. Keep cool.Store locked up.Dispose of contents /container to an approved waste disposal plant.
 4.  4.1. 

Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosisCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B)
Application method(s) WipingProduct will be wiped directly on the surface.
Application rate(s) and frequency Ready-to-use wipes
Category(ies) of users IndustrialProfessionalGeneral public (non-professional)
Pack sizes and packaging material Soft pack: 1-200 wipesPackaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPPPouch: 10-200 wipesPackaging material: LDPE/PETTube: 50-200 wipesPackaging material: HDPEclosure material is either PP, PE3385
 4.1.1. 
Thoroughly wipe the surface with the wipe and allow to take effect for at least 5 minutes at room temperature (20± 2°C).
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
-
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT04 - Food and feed area (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: Bacteria including Mycobacterium tuberculosisCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -Scientific name: VirusesCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B)
Application method(s) WipingProduct will be wiped directly on the surface.
Application rate(s) and frequency Ready-to-use wipes
Category(ies) of users IndustrialProfessionalGeneral public (non-professional)
Pack sizes and packaging material Soft pack: 1-200 wipesPackaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPPPouch: 10-200 wipesPackaging material: LDPE/PETTube: 50-200 wipesPackaging material: HDPEclosure material is either PP, PE3385
 4.2.1. 
Thoroughly wipe the surface with the wipe and allow to take effect for at least 5 minutes at room temperature (20± 2°C).
 4.2.2. 
See general directions for use.
 4.2.3. 
See general directions for use.
 4.2.4. 
-
 4.2.5. 
See general directions for use.
 5.  5.1. 
Clean the surface carefully before use.

Remove excess water from the surface before disinfection, if appropriate.

Make sure to wet surfaces completely.

Used wipes must be disposed in a closed container.
 5.2. 
The product must only be applied for disinfection of small surfaces.

Ensure adequate ventilation to prevent the formation of explosive atmospheres.

Avoid contact with eyes.

Keep out of the reach of children and pets.

Keep children and pets away from rooms where disinfection is taking place. Provide adequate ventilation before children and pets enter treated rooms. This does not apply to hospital patient rooms.
 5.3. 
First aid:


 In case of accident: Call a poison centre or a doctor.
 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
 If on skin: Wash with water. If skin irritation occurs: Get medical advice.
 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
 5.4. 
-
 5.5. 
Shelf-life: 24 months

Keep container tightly closed.

Store in a well-ventilated place.

Protect from sunlight.

Store at room temperature in the original container.
 6. 
The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
 7.  7.1. 

Trade name(s) schülke Hygiene-TücherSOS Desinfizierende FeuchttücherSOS Hygiene-Tücherkodan® clean comfort wipesschülke clean comfort wipesHygiene-TücherDesinfizierende FeuchttücherDesinfektionstücherclean comfort wipesdisinfecting wipes
Authorisation number EU-0023656-0006 1-6
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1
 1.  1.1. 

Identifier meta SPC 7 AntiLy SD
 1.2. 

Number 1-7
 1.3. 

Product type(s) PT04 - Food and feed area (Disinfectants)PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1 63,1
 2.2. 

Formulation(s) Any other liquid (AL), ready-to-use
 3. 

Hazard statements Highly flammable liquid and vapour.Causes serious eye irritation.May cause drowsiness or dizziness.Repeated exposure may cause skin dryness or cracking.
Precautionary statements Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.Keep container tightly closed.Ground and bond container and receiving equipment.Use explosion-proof electrical/ventilating/lighting equipment.Use non-sparking tools.Take action to prevent static discharges.Avoid breathing vapours.Avoid breathing spray.Use only outdoors or in a well-ventilated area.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing.Call a POISON CENTER or doctor if you feel unwell.If eye irritation persists: Get medical advice.If eye irritation persists: Get medical attention.In case of fire:Use alcohol-resistant foam, carbon dioxide or water mist to extinguish.Store in a well-ventilated place. Keep cool.Store locked up.Dispose of contents /container to an approved waste disposal plant.
 4.  4.1. 

Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: BacteriaCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B)
Application method(s) SprayingProduct will be sprayed directly on the surface.
Application rate(s) and frequency Ready-to-use. Do not apply more than 25 ml/m2.
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Bottle: 125-1000 mlpackaging material: HDPEClack cap material: PP; Fine mist-sprayer: complex system (PE-LD, PP, PBT, POM, EVA, stainless steel); Spray head: complex system (PP, PE, POM, Synthetic oil, Silicon oil)
 4.1.1. 
Spray ready-to-use product onto the surfaces and allow to take effect for at least 1 minute at room temperature(20±2 °C).
 4.1.2. 
The following personal risk mitigation measure can be applied for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product.
 4.1.3. 
See general directions for use.
 4.1.4. 
-
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: BacteriaCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B)
Application method(s) WipingProduct is applied on wipes by pouring, spraying or soaking and the surface is thoroughly wiped with the soaked wipe afterwards (wet-wiping).
Application rate(s) and frequency Ready-to-use. Do not apply more than 25 ml/m2.
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Bottle: 125-1000 mlpackaging material: HDPEClack cap material: PPFine mist-sprayer: complex system (PE-LD, PP, PBT, POM, EVA, stainless steel);Spray head: complex system (PP, PE, POM, Synthetic oil, Silicon oil)Canister: 5-30 Lpackaging material: HDPEclosure material: HDPE
 4.2.1. 
Apply the ready-to-use product on wipes by pouring, spraying or soaking and wipe the surface thoroughly with the wet wipe (wet-wiping). Allow to take effect for at least 5 minutes at room temperature (20±2 °C).
 4.2.2. 
The following personal risk mitigation measure can be applied for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product.
 4.2.3. 
See general directions for use.
 4.2.4. 
-
 4.2.5. 
See general directions for use.
 4.3. 

Product type PT04 - Food and feed area (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: BacteriaCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -Scientific name: VirusesCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B)
Application method(s) SprayingProduct will be sprayed directly on the surface.
Application rate(s) and frequency Ready-to-use. Do not apply more than 25 ml/m2.
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Bottle: 125-1000 mlpackaging material: HDPEClack cap material: PPFine mist-sprayer: complex system (PE-LD, PP, PBT, POM, EVA, stainless steel)Spray head: complex system (PP, PE, POM, Synthetic oil, Silicon oil)
 4.3.1. 
Spray ready-to-use product onto the surface and allow to take effect at room temperature (20 ± 2 °C) for at least 1 (bactericidal and yeasticidal activity) or 2 minutes (virucidal activity).
 4.3.2. 
The following personal risk mitigation measure can be applied for disinfection of food processing machinery and for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product.
 4.3.3. 
See general directions for use.
 4.3.4. 
-
 4.3.5. 
See general directions for use.
 4.4. 

Product type PT04 - Food and feed area (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: BacteriaCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -Scientific name: VirusesCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B)
Application method(s) WipingProduct is applied on wipes by pouring, spraying or soaking and the surface is thoroughly wiped with the soaked wipe afterwards (wet-wiping).
Application rate(s) and frequency Ready-to-use. Do not apply more than 25 ml/m2.
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Bottle: 125-1000 mlpackaging material: HDPEClack cap material: PPFine mist-sprayer: complex system (PE-LD, PP, PBT, POM, EVA, stainless steel)Spray head: complex system (PP, PE, POM, Synthetic oil, Silicon oil)Canister: 5-30 Lpackaging material: HDPEclosure material: HDPE
 4.4.1. 
Apply the ready-to-use product on wipes by pouring, spraying or soaking and wipe the surface thoroughly with the wet wipe (wet-wiping). Allow to take effect for at least 5 minutes at room temperature (20 ±2°C).
 4.4.2. 
The following personal risk mitigation measure can be applied for disinfection of food processing machinery and for refilling procedure unless it can be replaced by technical and/or organisational measures: Wear eye protection during handling of the product.
 4.4.3. 
See general directions for use.
 4.4.4. 
-
 4.4.5. 
See general directions for use.
 5.  5.1. 
Clean the surface carefully before use.

Remove excess water from the surface before disinfection, if appropriate.

Do not apply more than 25 ml/m2.

Make sure to wet surfaces completely.

Used wipes must be disposed in a closed container.
 5.2. 
The product must only be applied for disinfection of small surfaces.

Ensure adequate ventilation to prevent the formation of explosive atmospheres.

Avoid contact with eyes.

Apply a funnel for refilling.

Keep out of reach of children and pets.

Keep children and pets away from rooms where disinfection is taking place. Provide adequate ventilation before children and pets enter treated rooms. This does not apply to hospital patient rooms.
 5.3. 
First aid:


 In case of accident: Call a poison centre or a doctor.
 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
 If on skin: Wash with water. If skin irritation occurs: Get medical advice.
 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
 5.4. 
-
 5.5. 
Shelf-life: 36 months

Keep container tightly closed.

Store in a well-ventilated place.

Protect from sunlight.

Store at room temperature in the original container.
 6. 
The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
 7.  7.1. 

Trade name(s) AntiLy 5
Authorisation number EU-0023656-0007 1-7
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1
 7.2. 

Trade name(s) AntiLy 6
Authorisation number EU-0023656-0008 1-7
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1
 1.  1.1. 

Identifier meta SPC 8 AntiLy SD wipes
 1.2. 

Number 1-8
 1.3. 

Product type(s) PT04 - Food and feed area (Disinfectants)PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1 63,1
 2.2. 

Formulation(s) Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation
 3. 

Hazard statements Highly flammable liquid and vapour.Causes serious eye irritation.May cause drowsiness or dizziness.Repeated exposure may cause skin dryness or cracking.
Precautionary statements Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.Keep container tightly closed.Ground and bond container and receiving equipment.Use explosion-proof electrical/ventilating/lighting equipment.Use non-sparking tools.Take action to prevent static discharges.Avoid breathing vapours.Avoid breathing spray.Use only outdoors or in a well-ventilated area.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing.Call a POISON CENTER or doctor if you feel unwell.If eye irritation persists: Get medical advice.If eye irritation persists: Get medical attention.In case of fire:Use alcohol-resistant foam, carbon dioxide or water mist to extinguish.Store in a well-ventilated place. Keep cool.Store locked up.Dispose of contents /container to an approved waste disposal plant.
 4.  4.1. 

Product type PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: BacteriaCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B)
Application method(s) WipingProduct will be wiped directly on the surface.
Application rate(s) and frequency Ready-to-use wipes
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Can: 100-150 wipesPackaging: HDPEClosure material: HDPEPack: 100-150 wipesPackaging: PET/PE
 4.1.1. 
Thoroughly wipe the surface with the wipe and allow to take effect for at least 5 minutes at room temperature (20± 2°C).
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
-
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT04 - Food and feed area (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) Scientific name: BacteriaCommon name: -Development stage: -Scientific name: YeastCommon name: -Development stage: -Scientific name: VirusesCommon name: -Development stage: -
Field(s) of use IndoorDisinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B)
Application method(s) WipingProduct will be wiped directly on the surface.
Application rate(s) and frequency Ready-to-use wipes
Category(ies) of users IndustrialProfessional
Pack sizes and packaging material Can: 100-150 wipesPackaging: HDPEClosure material: HDPEPack: 100-150 wipesPackaging: PET/PE
 4.2.1. 
Thoroughly wipe the surface with the wipe and allow to take effect for at least 5 minutes at room temperature (20± 2°C).
 4.2.2. 
See general directions for use.
 4.2.3. 
See general directions for use.
 4.2.4. 
-
 4.2.5. 
See general directions for use.
 5.  5.1. 
Clean the surface carefully before use.

Remove excess water from the surface before disinfection, if appropriate.

Make sure to wet surfaces completely.

Used wipes must be disposed in a closed container.
 5.2. 
The product must only be applied for disinfection of small surfaces.

Ensure adequate ventilation to prevent the formation of explosive atmospheres.

Avoid contact with eyes.

Keep out of reach of children and pets.

Keep children and pets away from rooms where disinfection is taking place. Provide adequate ventilation before children and pets enter treated rooms. This does not apply to hospital patient rooms.
 5.3. 
First aid:


 In case of accident: Call a poison centre or a doctor.
 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
 If on skin: Wash with water. If skin irritation occurs: Get medical advice.
 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
 5.4. 
-
 5.5. 
Shelf-life: 24 months

Keep container tightly closed.

Store in a well-ventilated place.

Protect from sunlight.

Store at room temperature in the original container.
 6. 
The product contains propan-2-ol (CAS No.: 67-63-0), for which a European reference value of 129,28 mg/m3 for the professional user was agreed and used for the risk assessment of the product.
 7.  7.1. 

Trade name(s) AntiLy 5 wipes
Authorisation number EU-0023656-0009 1-8
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1
 7.2. 

Trade name(s) AntiLy 6 wipes
Authorisation number EU-0023656-0010 1-8
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol  Active Substance 67-63-0 200-661-7 63,1
