
Article 1 
A Union authorisation with authorisation number EU-0022265-0000 is granted to CID LINES NV for the making available on the market and use of the biocidal product family ‘Iodine based products – CID LINES NV’ in accordance with the summary of the biocidal product characteristics set out in the Annex.
The Union authorisation is valid from 3 September 2020 until 31 August 2030.
Article 2 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 7 August 2020.
For the Commission
The President
Ursula VON DER LEYEN
ANNEX
Iodine based products – CID LINES NV
Product type 3 – Veterinary hygiene (Disinfectants)
Product type 4 – Food and feed area (Disinfectants)
Authorisation number: EU-0022265-0000
R4BP asset number: EU-0022265-0000

PART I
1.  1.1. 

Name Iodine based products – CID LINES NV
 1.2. 

Product type(s) PT03 – Veterinary hygiene (Disinfectants)PT04 – Food and feed area (Disinfectants)
 1.3. 

Name and address of the authorisation holder Name CID LINES NV
Address Waterpoortstraat 2, 8900, Ieper, Belgium
Authorisation number EU-0022265-0000
R4BP asset number EU-0022265-0000
Date of the authorisation 3 September 2020
Expiry date of the authorisation 31 August 2030
 1.4. 

Name of manufacturer CID LINES NV
Address of manufacturer Waterpoortstraat 2, 8900 Ieper Belgium
Location of manufacturing sites Waterpoortstraat 2, 8900 Ieper Belgium
 1.5. 

Active substance Iodine
Name of manufacturer SQM S.A.
Address of manufacturer Los Militares, Piso 4, 4290 Santiago Chile
Location of manufacturing sites Nueva Victoria plant, 00 Pedro de Valdivia Chile


Active substance Iodine
Name of manufacturer Cosayach Nitratos S.A.
Address of manufacturer Amunategui 178, 00 Santiago Chile
Location of manufacturing sites Cala Cala, 00 Pozo Almonte Chile


Active substance Iodine
Name of manufacturer ACF Minera S.A.
Address of manufacturer San Martin No 499, 00 Iquique Chile
Location of manufacturing sites Lagunas mine, 00 Pozo Almonte Chile


Active substance Iodine
Name of manufacturer ISE Chemicals Corporation
Address of manufacturer 3-1, Kyobashi 1-Chome, 104-0031 Tokyo Japan
Location of manufacturing sites 3695 Kitaimaizumi, 299-3201 Oamishirasato city Japan


Active substance Polyvinylpyrrolidone iodine
Name of manufacturer ISP Chemicals LLC, Afiliate of Ashland Inc
Address of manufacturer 455 N. main st (HWY 95), KY 42029 Calvert City United States
Location of manufacturing sites 455 N. main st (HWY 95), KY 42029 Calvert City United States


Active substance Polyvinylpyrrolidone iodine
Name of manufacturer Pantheon FZE (DMCC branch)
Address of manufacturer 403, Reef Tower, Jumeira Lake Tower Shaikh Zayed Road, 00 Dubai United Arab Emirates
Location of manufacturing sites Cala Cala, 00 Pozo Almonte Chile

2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,0 3,0
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0 10,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 0,0 21,0
Phosphoric acid Phosphoric acid Non-active Substance 7664-38-2 231-633-2 0,0 30,0
Alcohol C9-11 + 6 EO Alcohol C9-11 + 6 EO Non-active Substance 68439-46-3  0,0 12,5
 2.2. 

Formulation(s) SL – Soluble concentrateAL – Any other liquid

PART II 1.  1.1. 

Identifier metaSPC 1: PT3 Concentrated teat disinfectants Iodine
 1.2. 

Number 1-1
 1.3. 

Product type(s) PT03 – Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 1,5 1,5
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0 0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 12,05 12,05
Phosphoric acid Phosphoric acid Non-active Substance 7664-38-2 231-633-2 0,0 0,0
Alcohol C9-11 + 6 EO Alcohol C9-11 + 6 EO Non-active Substance 68439-46-3  0,0 0,0
 2.2. 

Formulation(s) SL – Soluble concentrate
 3. 

Hazard statements Causes serious eye damage.Harmful to aquatic life with long lasting effects.May cause damage to organs (thyroid) through prolonged or repeated exposure (oral).
Precautionary statements Wear eye protection.Wear protective clothing.Wear protective gloves.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Immediately call a doctor or a poison center.Avoid release to the environment.Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
 4.  4.1. 

Product type PT03 – Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastsViruses
Field(s) of use IndoorPost-milking teat disinfection of milk producing animals
Application method(s) Manual or automatic spraying on teats
Application rate(s) and frequency Dilute the product to a final concentration of 0,3 % (w/w) available iodine.Apply 2 times per day with manual sprayer and 3 times per day with a robot.
Category(ies) of users Professional
Pack sizes and packaging material 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 LHDPE (High Density Polyethylene)
 4.1.1. 
See general directions for use.
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 5.  5.1. 
The product must be diluted before use with clean potable water to allow a final concentration of iodine of 0,3 % (200 ml product, add water up to 1 L).

The diluted product must be brought to a temperature above 20 °C before use.

Assume 5 mL diluted product per cow per treatment. The use of a dosing pump for filling the product into the application equipment is recommended. Use gloves and eye protection during the dilution step. The diluted product can be kept and used during 1 week but do not prepare more fluid than necessary.

Apply the diluted product on the teats with a manual sprayer or with an automatic sprayer.

The product should be used directly after milking 2 times per day by using a manual sprayer and 3 times per day when using a robot (automatic sprayer).

Ensure that the teat is completely covered to three quarters of its length. Let the product dry on teats. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).

Do not mix with other chemicals.
 5.2. 

— For mixing and loading of the product: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) and eye/face protection.
— For manual spraying application: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information).
— If a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
— Keep out of reach of children.
 5.3. 
After eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain emergency medical attention if pain, blinking, tears or redness persist.

If medical advice is needed, have product container or label at hand.

After ingestion: Rinse mouth. Spit. Do NOT induce vomiting and immediately get medical advice.

Have product container or label at hand.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.




— 
— 
— 


 5.5. 
Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use.

Protect from frost. Do not expose to temperatures > 40 °C.

The shelf-life of the products is 2 years.
 6.  7.  7.1. 

Trade name(s) Kenodin SD 400IodoSD 400Velvet ConcentrateWynnsan Iodine 3 – 1 concIodin Teat Spray 400 
Authorisation number EU-0022265-0001 1-1
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 1,5
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 12,05
 1.  1.1. 

Identifier metaSPC 2: PT3 – Ready to Use (RTU) Teat disinfectants Iodine
 1.2. 

Number 1-2
 1.3. 

Product type(s) PT03 – Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,3 0,3
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0 0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,1 2,9
Phosphoric acid Phosphoric acid Non-active Substance 7664-38-2 231-633-2 0,0 0,0
Alcohol C9-11 + 6 EO Alcohol C9-11 + 6 EO Non-active Substance 68439-46-3  0,0 0,0
 2.2. 

Formulation(s) AL – Any other liquid
 3. 

Hazard statements Harmful to aquatic life with long lasting effects.
Precautionary statements Avoid release to the environment.Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
 4.  4.1. 

Product type PT03 – Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastsViruses
Field(s) of use IndoorPost-milking teat disinfection of milk producing animals
Application method(s) By dipping or spraying on teats
Application rate(s) and frequency The product is ready to use.Apply 2 times per day for manual spraying and 3 times per day for manual dipping and spraying with robot
Category(ies) of users Professional
Pack sizes and packaging material 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 LHDPE
 4.1.1. 
See general directions for use.
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 5.  5.1. 
The product must be brought to a temperature above 20 °C before use.

Apply the product by dipping or by spraying:


— By dipping: Apply the product with a dip cup. Wash the dip cup with water after use.
— By spraying: Apply the product with a manual sprayer or with an automatic sprayer.

Do not prepare more fluid than necessary; assume 5 mL solution per cow per treatment. The use of a dosing pump for filling the product into the application equipment is recommended.

The product should be used immediately after each milking: 2 times per day for manual spraying and 3 times per day for manual dipping and spraying with robot. Ensure that the teat is completely covered to three quarters of its length. Let the product dry on teats. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).

Do not mix with other chemicals.
 5.2. 

— For manual dipping application: No special protection equipment is recommended under normal conditions of use.
— For manual spraying application: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information.
— If a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.
— Keep out of reach of children.
 5.3. 
After eye contact: Rinse immediately with water.

After ingestion: Rinse mouth. Spit.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.




— 
— 
— 


 5.5. 
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.

Protect from frost. Do not expose to temperatures > 40 °C.

The shelf-life of the products is 2 years.
 6.  7.  7.1. 

Trade name(s) IodoDip 3000Bio Tec Jodip 3000RecoïodeStalosan Io DipStalosan Super DipVelvet High ViscoBühning Joddip 3000KenodinWynnsan trikill RTUWynnsan Iodine RTU teat dipWynnsan Iodine dip RTUIocidIodip+Wynngold Iodine DipPezerk iv plusIod protect 3000 FilmSeivit® Iode 3000KenostartGAHERYODKenodin 3000Iodin Teat Dip 3000Iod 3000 dipIodoschutz dipIoschutz dipIodocoop dipIodotech dipIodactiv’ dipIododipMIROX Dip JodHCP Iodine DipAgib Jodium DipJod 3000Iod dipIode 3000IodoschutzCoopjodCoopiodeCoopiode épaisSemex jodIodotechIododip greenIodip bioIododip bioIodactive épaisIodactivIodoactiv’Bayley’s Premier Iodine Teat DipPearce Premier Iodine Teat DipDiamond 1:3 Concentrate Iodine Post Dip SprayJODOCAREKENOSTART DYPSTREPTOFITIodall Film 
Authorisation number EU-0022265-0002 1-2
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,3
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,17
 7.2. 

Trade name(s) Kenodin FilmIodoFilmWynnsan Iofilm teat dipKenodin Film ExtraWynngold FilmWynnsan trikill film teat dipKenodin Film SoftIocid FilmTOP FilmSeivit® Iode GelIOD protect 3000 FilmIodin Film Teat Dip 3000Iodin Barrier Teat Dip 3000Iodin Film Teat DipIodin Barrier Teat DipIod 3000 filmIodoschutz filmIoschutz filmIodocoop filmIodotech filmIodactiv’ filmIodofilmHCP Iodine FilmIod 3000 filmCoopjod filmCoopiode filmIodocoop filmSemex jod filmIodofilmIodofilm bioIofilm bioIodactive filmIodactiv filmIodactiv’ filmSCUDO 3000 
Authorisation number EU-0022265-0003 1-2
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,3
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,9
 1.  1.1. 

Identifier metaSPC 3: PT3-RTU Udder disinfectants Iodine
 1.2. 

Number 1-3
 1.3. 

Product type(s) PT03 – Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,3 0,99
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0 0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,17 2,95
Phosphoric acid Phosphoric acid Non-active Substance 7664-38-2 231-633-2 0,0 0,0
Alcohol C9-11 + 6 EO Alcohol C9-11 + 6 EO Non-active Substance 68439-46-3  0,0 0,0
 2.2. 

Formulation(s) AL – Any other liquid
 3. 

Hazard statements Harmful to aquatic life with long lasting effects.
Precautionary statements Avoid release to the environment.Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
 4.  4.1. 

Product type PT03 – Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorSkin disinfection only for use on intact skin of:
— the udder of dairy and beef cattle before calving
— the udder of sows before farrowing
Application method(s) Spraying
Application rate(s) and frequency The product is ready to use.Apply to:
— the udder of dairy and beef cattle: 1 spray on each teat (equivalent to 4,8 mL per application)
— the udder of sows: 15 to 20 mL per animal
Category(ies) of users Professional
Pack sizes and packaging material 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 LHDPE
 4.1.1. 
See general directions for use.
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 5.  5.1. 
The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

Apply by spraying on the animals’ intact skin for a topical disinfection:


— on the udder of dairy and beef cattle before calving: 1 spray on each teat (equivalent to 4,8 mL per application). Disinfection takes place once, one day before calving and once, one day after calving. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing at least 5 minutes).
— on the udder of sows before farrowing: Assume 15 to 20 mL per animal, once one day before farrowing and once every day during 4 days after farrowing. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).

Only for use on intact skin.

Do not mix with other chemicals.
 5.2. 
For manual spraying application on cows and sows: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information).

In case a combination of post-milking disinfection of cows and skin disinfection of cows is necessary, an iodine based product shall not be used by the same person to perform both disinfections.

Keep out of reach of children.
 5.3. 
After eye contact: Rinse immediately with water.

After ingestion: Rinse mouth. Spit
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.




— 
— 
— 


 5.5. 
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.

Protect from frost. Do not expose to temperatures > 40 °C.

The shelf-life of the products is 2 years.
 6.  7.  7.1. 

Trade name(s) Animal Skin DisinfectantDermades 3000Iodin Skin Disinfectant 
Authorisation number EU-0022265-0004 1-3
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,3
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,17
 7.2. 

Trade name(s) DermadesAnimal skin disinfectant 1 %Dermades StrongIodin Skin Disinfectant Strong 
Authorisation number EU-0022265-0005 1-3
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,99
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,95
 1.  1.1. 

Identifier metaSPC 4: PT3 – RTU Udder and Teat disinfectants Iodine
 1.2. 

Number 1-4
 1.3. 

Product type(s) PT03 – Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,3 0,3
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0 0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,17 2,17
Phosphoric acid Phosphoric acid Non-active Substance 7664-38-2 231-633-2 0,0 0,0
Alcohol C9-11 + 6 EO Alcohol C9-11 + 6 EO Non-active Substance 68439-46-3  0,0 0,0
 2.2. 

Formulation(s) AL – Any other liquid
 3. 

Hazard statements Harmful to aquatic life with long lasting effects.
Precautionary statements Avoid release to the environment.Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
 4.  4.1. 

Product type PT03 – Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastsViruses
Field(s) of use IndoorReady to use teat disinfectant to be used post milking on milk producing animals.
Application method(s) Dipping or spraying
Application rate(s) and frequency The product is ready to use.Apply 2 times per day for manual spraying and 3 times per day for manual dipping and spraying with robot.
Category(ies) of users Professional
Pack sizes and packaging material 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 LHDPE
 4.1.1. 
The product must be brought to a temperature above 20 °C before use.


— By dipping: Apply the product on the teats with a dip cup. Wash the dip cup with water after use.
— By spraying: Apply the product on the teats with a manual sprayer or with an automatic sprayer.

Do not prepare more fluid than necessary. Assume 5 mL solution per cow per treatment. The use of a dosing pump for filling the product into the application equipment is recommended.

The product should be used directly after milking by using a dipping cup or a manual or automatic sprayer. Ensure that the teat is completely covered to three quarters of its length.

The product is applied after milking: 2 times per day for manual spraying and 3 times per day for manual dipping and spraying with robot.

Let the product dry on the teats. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).

Do not mix with other chemicals.
 4.1.2. 

— For manual spraying application: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information).
— For manual dipping application: no Personal Protection Equipment (PPE) is necessary for safe use.
— If a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
— Keep out of reach of children.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT03 – Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) YeastsBacteria
Field(s) of use IndoorReady to use skin disinfectant, only for use on intact skin of:
— the udder of dairy and beef cattle before calving
— the udder of sows before farrowing
Application method(s) Application on animal skin: by spraying
Application rate(s) and frequency The product is ready to use.Apply to:
— the udder of dairy and beef cattle: 1 spray on each teat (equivalent to 4,8 mL per application)
— the udder of sows: 15 to 20 mL per animal
Category(ies) of users Professional
Pack sizes and packaging material 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 LHDPE
 4.2.1. 
The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

Apply by spraying on the animals’ intact skin for a topical disinfection:


— on the udder of dairy and beef cattle before calving: 1 spray on each teat (equivalent to 4,8 mL per application). Disinfection takes place once, one day before calving and once, one day after calving. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).
— on the udder of sows before farrowing: Assume 15 to 20 mL per animal, once one day before farrowing and once every day during 4 days after farrowing. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).

Let the product dry on skin.

Only for use on intact skin.

Do not mix with other chemicals.
 4.2.2. 

— For manual spraying application on cows and sows: no PPE is necessary for safe use.
— Keep out of reach of children.
 4.2.3. 
See general directions for use.
 4.2.4. 
See general directions for use.
 4.2.5. 
See general directions for use.
 5.  5.1. 
See use-specific instructions for use.
 5.2. 
See use-specific risk mitigation measures
 5.3. 
After eye contact: Rinse immediately with water.

After ingestion: Rinse mouth. Spit.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.




— 
— 
— 


 5.5. 
Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use.

Protect from frost. Do not expose to temperatures > 40 °C.

The shelf-life of the products is 2 years.
 6.  7.  7.1. 

Trade name(s) Kenodin SDIodoSD 3000Bio Tec Jodspray 3000Q Farm Iodine DesANRO – Euterpflege DipStalosan Io SprayStalosan Super SprayIDip+Bühning Jodspray 3000Velvet RTUWynnsan trikill sprayWynnsan Iodine spray RTUWynngold Iodine Dip and sprayPezerk ILIod protect 3000 SprühSeivit® Iode SprayIOD protect 3000 SprühKenodin SprayFilmIodo SPKenostart SDGAHERYOD SPRAYIodin Teat & Skin 3000Iod 3000 sprühIodoschutz sprühIoschutz sprühIodocoop sprühIodotech sprühIodactiv’ sprühIodosprühMIROX Spray JodHCP Iodine SDAgib Jodium SprayJod 3000 sprayIod sprühCoopjodCoopiode sprayIodocoop spraySemex jod sprayIododip sprayIododip spray greenIodospray BioIospray bioIodactive sprayIodactiv sprayIodactiv’ sprayArk Iodine S+DAgrihealth Iodine SDAGRO LOGIC JODOCARE SPRAYIODACTIVE 
Authorisation number EU-0022265-0006 1-4
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,3
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,17
 1.  1.1. 

Identifier metaSPC 5: PT3 – RTU Teat disinfectants PVP-Iodine
 1.2. 

Number 1-5
 1.3. 

Product type(s) PT03 – Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,0 0,0
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  3,0 3,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 1,5 2,9
Phosphoric acid Phosphoric acid Non-active Substance 7664-38-2 231-633-2 0,0 0,0
Alcohol C9-11 + 6 EO Alcohol C9-11 + 6 EO Non-active Substance 68439-46-3  0,0 0,0
 2.2. 

Formulation(s) AL – Any other liquid
 3. 

Hazard statements Harmful to aquatic life with long lasting effects.
Precautionary statements Avoid release to the environment.Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
 4.  4.1. 

Product type PT03 – Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastsViruses
Field(s) of use IndoorPost-milking disinfection on teats of milk producing animals
Application method(s) Dipping or spraying
Application rate(s) and frequency The product is ready to use.Apply 2 times per day for manual spraying and 3 times per day for manual dipping and spraying with robot.
Category(ies) of users Professional
Pack sizes and packaging material 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 LHDPE
 4.1.1. 
See general directions for use.
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 5.  5.1. 
The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

Apply the product by dipping or by spraying:


— By dipping: Apply the product with a dip cup. Wash the dip cup with water after use.
— By spraying: Apply the product with a manual sprayer or with an automatic sprayer.

Do not prepare more fluid than necessary. Assume 5 mL solution per cow per treatment.

The product should be used immediately after each milking, two times per day for manual spraying and 3 times per day for manual dipping and spraying with robot. Ensure that the teat is completely covered to three quarters of its length. Let the product dry on teats. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).

Do not mix with other chemicals.
 5.2. 

— For manual spraying application: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information.
— For manual dipping application: no PPE is necessary for safe use.
— If a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.
— Keep out of reach of children.
 5.3. 
After eye contact: Rinse immediately with water.

After ingestion: Rinse mouth. Spit.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.




— 
— 
— 


 5.5. 
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.

Protect from frost. Do not expose to temperatures > 40 °C.

The shelf-life of the products is 18 months.
 6.  7.  7.1. 

Trade name(s) Iodo PVPIodin Teat Dip 3000 PVP 
Authorisation number EU-0022265-0007 1-5
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,0
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  3,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,5
 7.2. 

Trade name(s) Iodo SD PVPIodin Teat Spray & Dip 3000 PVP 
Authorisation number EU-0022265-0008 1-5
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,0
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  3,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,5
 1.  1.1. 

Identifier metaSPC 6: PT3- RTU Udder disinfectants PVP-Iodine
 1.2. 

Number 1-6
 1.3. 

Product type(s) PT03 – Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,0 0,0
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  10,0 10,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,0 2,0
Phosphoric acid Phosphoric acid Non-active Substance 7664-38-2 231-633-2 0,0 0,0
Alcohol C9-11 + 6 EO Alcohol C9-11 + 6 EO Non-active Substance 68439-46-3  0,0 0,0
 2.2. 

Formulation(s) AL – Any other liquid
 3. 

Hazard statements Harmful to aquatic life with long lasting effects.May cause damage to organs (thyroid) through prolonged or repeated exposure (oral).
Precautionary statements Avoid release to the environment.Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.Do not breathe spray.
 4.  4.1. 

Product type PT03 – Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorReady to use skin disinfectant, only for use on intact skin of:
— the udder of dairy and beef cattle: before calving
— the udder of sows: before farrowing
Application method(s) Spraying
Application rate(s) and frequency The product is ready to use.Apply to:
— The udder of dairy and beef cattle: 1 spray on each teat (equivalent to 4,8 mL per application)
— The udder of sows: 15 to 20 mL per animal
Category(ies) of users Professional
Pack sizes and packaging material 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 LHDPE
 4.1.1. 
The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.


— Dairy and beef cattle: Apply the product by spraying on the udder before calving (1 spray/teat equivalent to 4,8 mL per application). Disinfection takes place once, one day before calving and once, one day after calving. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).
— Sows, on the udder before farrowing: Assume 15 to 20 mL per animal. Disinfection takes place once, one day before farrowing and once every day during 4 days after farrowing. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).

Only for use on intact skin.

Do not mix with other chemicals.
 4.1.2. 

— For manual spraying application on cows and sows: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information).
— In case a combination of post-milking disinfection of cows and skin disinfection of cows is necessary, an iodine based product shall not be used by the same person to perform both disinfections.
— Keep out of reach of children.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 5.  5.1. 
See use-specific instructions for use.
 5.2. 
See use-specific risk mitigation measures.
 5.3. 
After eye contact: Rinse immediately with water.

After ingestion: Rinse mouth. Spit. Do NOT induce vomiting and immediately get medical advice.

Have product container or label at hand.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.




— 
— 
— 


 5.5. 
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.

Protect from frost. Do not expose to temperatures > 40 °C.

The shelf-life of the products is 2 years.
 6.  7.  7.1. 

Trade name(s) Dermades PVPWynngold 10 % Iodine SolutionIodin Skin Disinfectant PVP 
Authorisation number EU-0022265-0009 1-6
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,0
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  10,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,0
 1.  1.1. 

Identifier metaSPC 7: PT3 and PT4 – Concentrated Surface disinfectants Iodine
 1.2. 

Number 1-7
 1.3. 

Product type(s) PT03 – Veterinary hygiene (Disinfectants)PT04 – Food and feed area (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 1,8 2,49
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0 0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 3,15 9,45
Phosphoric acid Phosphoric acid Non-active Substance 7664-38-2 231-633-2 0,0 0,0
Alcohol C9-11 + 6 EO Alcohol C9-11 + 6 EO Non-active Substance 68439-46-3  2,5 12,5
 2.2. 

Formulation(s) SL – Soluble concentrate
 3. 

Hazard statements Causes serious eye damage.May cause damage to organs (thyroid) through prolonged or repeated exposure (oral).May be corrosive to metals.Toxic to aquatic life with long lasting effects.
Precautionary statements Wear protective gloves.Wear protective clothing.Wear eye protection.Wear face protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Immediately call a doctor or a POISON CENTER.Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.Collect spillage.Avoid release to the environment.
 4.  4.1. 

Product type PT04 – Food and feed area (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorNon-porous surface disinfection in professional kitchens and in food industry
Application method(s) By spraying with a manual or an automatic sprayer
Application rate(s) and frequency Assume 0,04 L solution for every square meter that has to be disinfected. Bactericidal and yeasticidal activity: 0,015 % iodineFrequency is once per day.
Category(ies) of users Professional
Pack sizes and packaging material 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 LHDPE
 4.1.1. 
Use in professional kitchens (PT4) and in food industry (PT4):

The product must be diluted with water before use (according to the table below).

Clean the surfaces thoroughly with a detergent before disinfection. Rinse with clean water and remove surplus water.

The product is used in professional kitchens (surface disinfection): Frequency is once per day.

The product is used in food industry (surface disinfection): Frequency is once per day.

Use at room temperature.

Apply the product by spraying with a manual or an automatic sprayer. Make sure to wet the surface completely. Allow to take effect for at least 15 minutes and rinse the surfaces afterwards with clean water.


Example for a product containing 1 % iodine Dilution of the product Contact time
Bactericidal and yeasticidal activity 1,5 % (15 ml product, add water up to 1 L) 15 min


Do not mix with other chemicals.

Do not prepare more fluid than necessary.
 4.1.2. 

— During pouring and pumping of the concentrated product: Wear chemical resistant gloves (material to be specified by the authorisation holder within the product information) and eye/face protection.
— During spraying of the product: Wear chemical resistant gloves and protective coverall (at least type X, EN XXXXX) (glove and coverall material to be specified by the authorisation holder within the product information).
— Keep out of reach of children.
— The general public and animals should be kept away from treated areas until surfaces are dry.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT03 – Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastsViruses
Field(s) of use IndoorNon-porous surface disinfection in veterinary field
Application method(s) By spraying with a manual or an automatic sprayer
Application rate(s) and frequency Assume 0,04 L solution for every square meter that has to be disinfected. Bactericidal and yeasticidal activity: 0,025 % in-use iodine Virucidal activity: 0,035 % in-use iodine
Category(ies) of users Professional
Pack sizes and packaging material 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 LHDPE
 4.2.1. 
Use in veterinary field (PT3), surface disinfection:

The product should be diluted with water before use (according to table below).

Clean the surfaces thoroughly with a detergent before disinfection. Rinse with clean water and remove surplus water.

The product is used to disinfect animal housings of pigs, cows and poultry.

Apply the product by spraying with a manual or an automatic sprayer. Make sure to wet the surface completely. Allow to take effect for at least 30 minutes. Animal housing must be empty of animals during application and animals can re-enter 24h after the end of the application.


Example for a product containing 2,49 % iodine Dilution of the product Contact time
Bactericidal and yeasticidal activity 1 % (10ml product, add water up to 1 L) 30 min
Virucidal activity 1,4 % (14ml product, add water up to 1 L) 30 min


Do not mix with other chemicals.

Do not prepare more fluid than necessary.
 4.2.2. 

— During pouring and pumping of the concentrated product: Wear chemical resistant gloves, coated coverall (material to be specified by the authorisation holder within the product information) and eye/face protection.
— During spraying of the product: Wear chemical resistant gloves and protective coverall (at least type X, EN XXXXX) which is impermeable for the biocidal product (glove and coverall material to be specified by the authorisation holder within the product information).
— Only use one kind of Iodine-containing product per day.
— Due to potential concern for human health the same professional user shall not carry out animal house disinfection more than 3 times per month and shll not use Iodine products for other purposes during that period.
— Due to potential concern for animal health, disinfection of stables should not be carried out more than once per year or once per lifetime for calves and pigs. Feeding troughs must be covered during application.
— Keep out of reach of children.
— The general public and animals should be kept away from treated areas until surfaces are dry.
 4.2.3. 
See general directions for use.
 4.2.4. 
See general directions for use.
 4.2.5. 
See general directions for use.
 5.  5.1. 
See use-specific instructions for use.
 5.2. 
See use-specific risk mitigation measures.
 5.3. 
After eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain emergency medical attention if pain, blinking, tears or redness persist.

If medical advice is needed, have product container or label at hand.

After ingestion: Rinse mouth. Spit. Do NOT induce vomiting and immediately get medical advice.

Have product container or label at hand.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.




— 
— 
— 


 5.5. 
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.

Protect from frost. Do not expose to temperatures > 40 °C.

The shelf-life of the products is 2 years.
 6.  7.  7.1. 

Trade name(s) Dodin 20Iodo 20Bio Tec JoddesinfektionDufa dine 1,8 %Alfasan super disinfectantIodesStreptocleanIodin Surface Disinfectant 1,8 %IODINE 
Authorisation number EU-0022265-0010 1-7
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 1,8
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 5,29
Alcohol C9-11 + 6 EO Alcohol C9-11 + 6 EO Non-active Substance 68439-46-3  5,0
 1.  1.1. 

Identifier metaSPC 8: PT3 and PT4 – Concentrated Surface disinfectants Iodine
 1.2. 

Number 1-8
 1.3. 

Product type(s) PT03 – Veterinary hygiene (Disinfectants)PT04 – Food and feed area (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 2,5 3,0
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0 0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 3,15 9,45
Phosphoric acid Phosphoric acid Non-active Substance 7664-38-2 231-633-2 5,0 12,0
Alcohol C9-11 + 6 EO Alcohol C9-11 + 6 EO Non-active Substance 68439-46-3  2,5 12,5
 2.2. 

Formulation(s) SL – Soluble concentrate
 3. 

Hazard statements May be corrosive to metals.Causes skin irritation.Causes serious eye damage.May cause damage to organs (thyroid) through prolonged or repeated exposure (oral).Toxic to aquatic life with long lasting effects.
Precautionary statements Wear protective gloves.Wear protective clothing.Wear eye protection.Wear face protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.Immediately call a a POISON CENTER or doctor/physician.If experiencing respiratory symptoms: Call a a POISON CENTER or doctor/physician.Avoid release to the environment.Collect spillage.Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
 4.  4.1. 

Product type PT04 – Food and feed area (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorNon-porous surface disinfection in professional kitchens and in food industry
Application method(s) By spraying with a manual or an automatic sprayer
Application rate(s) and frequency Assume 0,04 L solution for every square meter that has to be disinfected. Bactericidal and yeasticidal activity: 0,015 % iodineDaily use
Category(ies) of users Professional
Pack sizes and packaging material 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 LHDPE
 4.1.1. 

— Use in professional kitchens (PT4) and in food industry (PT4):
— The product must be diluted with water before use (according to table below).
— Clean the surfaces thoroughly with a detergent before disinfection. Rinse with clean water and remove surplus water.
— The product is used in professional kitchens (surface disinfection): Frequency is once per day.
— The product is used in food industry (surface disinfection): Frequency is once per day.
— Use at room temperature.
— The product is applied by spraying with a manual or an automatic sprayer. Make sure to wet the surface completely. Allow to take effect for at least 15 minutes, and rinse the surfaces afterwards with clean water.


Example for a product containing 3 % iodine Dilution of the product Contact time
Bactericidal and yeasticidal activity 0,5 % (5 ml product, add water up to 1 L) 15 min


Do not mix with other chemicals.

Do not prepare more fluid than necessary.
 4.1.2. 

— During pouring and pumping of the concentrated product: Wear chemical resistant gloves, coverall (material to be specified by the authorisation holder within the product information) and eye/face protection.
— During spraying of the product: Wear chemical resistant gloves and protective coverall (at least type X, EN XXXXX) (glove and coverall material to be specified by the authorisation holder within the product information).
— Keep out of reach of children.
— The general public and animals should be kept away from treated areas until surfaces are dry.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT03 – Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastsViruses
Field(s) of use IndoorNon-porous surface disinfection in veterinary field
Application method(s) By spraying with a manual or an automatic sprayer
Application rate(s) and frequency Assume 0,04 L solution for every square meter that has to be disinfected. Bactericidal and yeasticidal activity: 0,025 % in-use iodine Virucidal activity: 0,035 % in-use iodine
Category(ies) of users Professional
Pack sizes and packaging material 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 LHDPE
 4.2.1. 
Use in veterinary field (PT3), surface disinfection:

The product must be diluted with water before use (according to table below).

Clean the surfaces thoroughly with a detergent before disinfection. Rinse with clean water and remove surplus water.

The product is used to disinfect animal housings of pigs, cows and poultry.

Apply the product by spraying with a manual or an automatic sprayer. Make sure to wet the surface completely. Allow to take effect for at least 30 minutes. Animal housing must be empty of animals during application and re-entry of animals can be done 24h after the end of the application.


Example for a product containing 2,5 % iodine Dilution of the product Contact time
Bactericidal and yeasticidal activity 1 % (10ml product, add water up to 1 L) 30 min
Virucidal activity 1,4 % (14ml product, add water up to 1 L) 30 min


Do not mix with other chemicals.

Do not prepare more fluid than necessary.
 4.2.2. 

— During pouring and pumping of the concentrated product: Wear chemical resistant gloves, coverall (material to be specified by the authorisation holder within the product information)and eye/face protection.
— During spraying of the product: Wear chemical resistant gloves and protective coverall (at least type X, EN XXXXX) which is impermeable for the biocidal product (glove and coverall material to be specified by the authorisation holder within the product information).
— Only use one kind of Iodine-containing product per day.
— Due to potential concern for human health the same professional user shall not carry out animal house disinfection more than 3 times per month and shall not use Iodine products for other purposes during that period.
— Due to potential concern for animal health, disinfection of stables should not be carried out more than once per year or once per lifetime for calves and pigs. Feeding troughs must be covered during application.
— Keep out of reach of children.
— The general public and animals should be kept away from treated areas until surfaces are dry.
 4.2.3. 
See general directions for use.
 4.2.4. 
See general directions for use.
 4.2.5. 
See general directions for use.
 5.  5.1. 
See use-specific instructions for use
 5.2. 
See use-specific risk mitigation measures.
 5.3. 
After eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain emergency medical attention if pain, blinking, tears or redness persist.

If medical advice is needed, have product container or label at hand.

After skin (or hair) contact: Remove contaminated clothing and shoes. Wash the affected area thoroughly with plenty of soap and water. Get medical attention if symptoms occur.

After ingestion: Rinse mouth. Spit. Do NOT induce vomiting and immediately get medical advice.

Have product container or label at hand.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.




— 
— 
— 


 5.5. 
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.

Protect from frost. Do not expose to temperatures > 40 °C.

The shelf-life of the products is 2 years.
 6.  7.  7.1. 

Trade name(s) Iocid 30Iodo 30Dufa dineIodin Surface Disinfectant 2,8 % 
Authorisation number EU-0022265-0011 1-8
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 2,8
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 7,93
Phosphoric acid Phosphoric acid Non-active Substance 7664-38-2 231-633-2 11,25
Alcohol C9-11 + 6 EO Alcohol C9-11 + 6 EO Non-active Substance 68439-46-3  12,5
 1.  1.1. 

Identifier metaSPC 9: PT4 – Concentrated CIP disinfectants Iodine
 1.2. 

Number 1-9
 1.3. 

Product type(s) PT04 – Food and feed area (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,5 0,99
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0 0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 0,0 0,0
Phosphoric acid Phosphoric acid Non-active Substance 7664-38-2 231-633-2 25,0 30,0
Alcohol C9-11 + 6 EO Alcohol C9-11 + 6 EO Non-active Substance 68439-46-3  0,0 0,0
 2.2. 

Formulation(s) SL – Soluble concentrate
 3. 

Hazard statements Causes severe skin burns and eye damage.Harmful to aquatic life with long lasting effects.May be corrosive to metals.
Precautionary statements Wear protective gloves.Wear protective clothing.Wear eye protection.Wear face protection.Avoid release to the environment.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.If experiencing respiratory symptoms: Call a doctor.Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.Immediately call a doctor.
 4.  4.1. 

Product type PT04 – Food and feed area (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorCleaning in place (CIP) disinfection for milking equipment and CIP installations in food industry
Application method(s) CIP disinfection
Application rate(s) and frequency Apply the product in the automatic system with an end concentration of 0,00125 % available iodineThe product is used once per day in food industry and up to 2 times per day in milking parlours.
Category(ies) of users Professional
Pack sizes and packaging material 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 LHDPE
 4.1.1. 
See general instructions.
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 5.  5.1. 

— Disinfection of milking machines or CIP installations in food industry
— Clean first the CIP installation.
— Apply the product in the automatic system with a dilution of the product (according to table below) with water.
— Use at room temperature.
— Respect a contact time according to the table below.
— Rinse the installation with water.


Example for a product containing 0,5 % iodine Dilution of the product Contact time
Bactericidal and yeasticidal activity 0,25 % (2,5 ml product, add water up to 1 L) 15 min


Do not mix with other chemicals.
 5.2. 
During pouring and pumping of the concentrated product: Wear chemical resistant gloves and protective coverall (at least type X, EN XXXXX) (glove and coverall material to be specified by the authorisation holder within the product information) and eye/face protection.

Keep out of reach of children.
 5.3. 
After inhalation: Remove person to fresh air and keep comfortable for breathing. Obtain medical attention if breathing difficulty persists.

After skin (or hair) contact: Remove contaminated clothing and shoes. Wash the affected area thoroughly with plenty of soap and water. Get medical attention if symptoms occur.

After eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain emergency medical attention if pain, blinking, tears or redness persist.

After ingestion: Rinse mouth. Do NOT induce vomiting and immediately get medical advice.

Have product container or label at hand.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.




— 
— 
— 


 5.5. 
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.

Protect from frost. Do not expose to temperatures > 40 °C.

The shelf-life of the products is 2 years.
 6.  7.  7.1. 

Trade name(s) Iodo CIPIocipBio Tec JodreinigerJODOPHOS SUPER 4001Bühning JodreinigerWynnsan Ice bank Tank CleanerBulk Tank SanitizerIodin CIP Disinfectant 
Authorisation number EU-0022265-0012 1-9
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,5
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0
Phosphoric acid Phosphoric acid Non-active Substance 7664-38-2 231-633-2 26,3
 1.  1.1. 

Identifier metaSPC 10: PT3 – Concentrated teat disinfectants Iodine
 1.2. 

Number 1-10
 1.3. 

Product type(s) PT03 – Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 2,8 2,8
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0 0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 21,0 21,0
Phosphoric acid Phosphoric acid Non-active Substance 7664-38-2 231-633-2 0,0 0,0
Alcohol C9-11 + 6 EO Alcohol C9-11 + 6 EO Non-active Substance 68439-46-3  0,0 0,0
 2.2. 

Formulation(s) SL – Soluble concentrate
 3. 

Hazard statements Causes serious eye damage.Toxic to aquatic life with long lasting effects.May cause damage to organs (thyroid) through prolonged or repeated exposure (oral route).
Precautionary statements Wear protective gloves.Wear protective clothing.Wear eye protection.Wear face protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Immediately call a doctor or a poison center.Avoid release to the environment.Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.Collect spillage.
 4.  4.1. 

Product type PT03 – Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastsViruses
Field(s) of use IndoorPost-milking teat disinfection of milk producing animals
Application method(s) By spraying with a manual sprayer or with an automatic sprayer on teats.
Application rate(s) and frequency The product must be diluted before use in order to allow a final concentration of iodine of 0,3 %.Apply 2 times per day by using a manual sprayer and 3 times per day when using a robot (or automatic sprayer).
Category(ies) of users Professional
Pack sizes and packaging material 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 LHDPE
 4.1.1. 
See general directions for use.
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 5.  5.1. 
The product must be diluted before use in order to allow a final concentration of iodine of 0,3 %. The product should be diluted to 11 % (110mL product, add water up to 1 L).

Do not prepare more fluid than necessary. Assume 5 mL solution per cow per treatment. The use of a dosing pump for filling the product into the application equipment is recommended.

Use gloves and eye protection during the dilution step. The diluted product can be kept and used for 1 week.

The product must be brought to a temperature above 20 °C before use.

Apply the diluted product on the teats with a manual sprayer or with an automatic sprayer.

The product should be used directly after milking 2 times per day by using a manual sprayer and 3 times per day by using a robot (automatic sprayer). Ensure that the teat is completely covered to three quarters of its length. Let the product dry on teats. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).

Do not mix with other chemicals.
 5.2. 

— For mixing and loading of the product: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) and eye/face protection.
— For manual spraying application: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) and eye/face protection.
— If a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
— Keep out of reach of children.
 5.3. 
After eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain emergency medical attention if pain, blinking, tears or redness persist.

If medical advice is needed, have product container or label at hand.

After ingestion: Rinse mouth. Spit. Do NOT induce vomiting and immediately get medical advice.

Have product container or label at hand.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.




— 
— 
— 


 5.5. 
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.

Protect from frost. Do not expose to temperatures > 40 °C.

The shelf-life of the products is 2 years.
 6. 
Dilutions of the product(s) are stable for 1 week.
 7.  7.1. 

Trade name(s) Kenodin SD 900IodoSD 900IDip+ concentrateJodkonzentrat 1:9Bühning Jodkonzentrat 1:9Wynnsan Iodine Conc dip 9-1Kenodin 900Dufa DipKenostart 900Iodin Teat Spray 900HCP Iodine ConcentrateMaxi Subliem CPSubliem Koncentrat Plus 
Authorisation number EU-0022265-0013 1-10
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 2,8
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 21,0
 1.  1.1. 

Identifier metaSPC 11: PT3 – RTU Teat disinfectants Iodine
 1.2. 

Number 1-11
 1.3. 

Product type(s) PT03 – Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,25 0,25
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0 0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,1 2,1
Phosphoric acid Phosphoric acid Non-active Substance 7664-38-2 231-633-2 0,0 0,0
Alcohol C9-11 + 6 EO Alcohol C9-11 + 6 EO Non-active Substance 68439-46-3  0,0 0,0
 2.2. 

Formulation(s) AL – Any other liquid
 3. 

Hazard statements Harmful to aquatic life with long lasting effects.
Precautionary statements Avoid release to the environment.Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
 4.  4.1. 

Product type PT03 – Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorPost-milking teat disinfection of milk producing animals
Application method(s) By dipping or spraying on teats
Application rate(s) and frequency The product is ready to use.Apply 2 times per day when using a manual sprayer and 3 times per day when using a dip cup or a robot (automatic sprayer).
Category(ies) of users Professional
Pack sizes and packaging material 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 LHDPE
 4.1.1. 
See general instructions.
 4.1.2. 
See general instructions.
 4.1.3. 
See general instructions.
 4.1.4. 
See general instructions.
 4.1.5. 
See general instructions.
 5.  5.1. 
Apply the product by dipping or by spraying:


— By dipping: Apply the product with a dip cup. Wash the dip cup with water after use.
— By spraying: Apply the product with a manual sprayer or with an automatic sprayer.

Do not prepare more fluid than necessary; assume 5 mL solution per cow per treatment. The product must be brought to a temperature above 20 °C before use. The use of a dosing pump for filling the product into the application equipment is recommended.

The product should be used immediately after each milking, two times per day when using a manual sprayer or three times per day when using a dip cup or a robot (automatic sprayer). Ensure that the teat is completely covered to three quarters of its length. Let the product dry on teats. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).

Do not mix with other chemicals.
 5.2. 

— For manual spraying application: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information).
— For manual dipping application: no PPE is necessary for safe use.
— If a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
— Keep out of reach of children.
 5.3. 
After eye contact: Rinse immediately with water.

After ingestion: Rinse mouth. Spit.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.




— 
— 
— 


 5.5. 
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.

Protect from frost. Do not expose to temperatures > 40 °C.

The shelf-life of the products is 2 years.
 6.  7.  7.1. 

Trade name(s) Kenodin 2500Iodin Teat Dip 2500Jod 2500 
Authorisation number EU-0022265-0014 1-11
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,25
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,1
 1.  1.1. 

Identifier meta SPC 12: PT3 – RTU Teat disinfectants Iodine
 1.2. 

Number 1-12
 1.3. 

Product type(s) PT03 – Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,3 0,5
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0 0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,1 2,9
Phosphoric acid Phosphoric acid Non-active Substance 7664-38-2 231-633-2 0,0 0,0
Alcohol C9-11 + 6 EO Alcohol C9-11 + 6 EO Non-active Substance 68439-46-3  0,0 0,0
 2.2. 

Formulation(s) AL – Any other liquid
 3. 

Hazard statements Harmful to aquatic life with long lasting effects.
Precautionary statements Avoid release to the environment.Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.Dispose of container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
 4.  4.1. 

Product type PT03 – Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastsViruses
Field(s) of use IndoorPost-milking teat disinfection of milk producing animals
Application method(s) By dipping or spraying on teats
Application rate(s) and frequency The product is ready to use.Apply 2 times per day for manual spraying and 3 times per day for manual dipping and spraying with robot.
Category(ies) of users Professional
Pack sizes and packaging material 1 L, 5 L, 10 L, 20 L, 25 L, 30 L, 60 L, 200 L, 600 L, 1000 LHDPE
 4.1.1. 
See general directions for use.
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 5.  5.1. 
The product must be brought to a temperature above 20 °C before use.

Apply the product by dipping or by spraying:


— By dipping: Apply the product with a dip cup. Wash the dip cup with water after use
— By spraying: Apply the product with a manual sprayer or with an automatic sprayer.

Do not prepare more fluid than necessary; assume 5 mL solution per cow per treatment.

The product should be used immediately after each milking: 2 times per day for manual spraying and 3 times per day for manual dipping and spraying with robot. Ensure that the teat is completely covered to three quarters of its length. Let the product dry on teats. To ensure sufficient contact time, care should be taken that the product is not removed after application (e.g. keep the animal standing for at least 5 minutes).

Do not mix with other chemicals.
 5.2. 

— For manual spraying application: Wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information).
— For manual dipping application: no PPE is necessary for safe use.
— If a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
— Keep out of reach of children.
 5.3. 
After eye contact: Rinse immediately with water.

After ingestion: Rinse mouth. Spit.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.




— 
— 
— 


 5.5. 
Keep only in the original container in a cool, well-ventilated place. Keep container closed when not in use.

Protect from frost. Do not expose to temperatures > 40 °C.

The shelf-life of the products is 2 years.
 6.  7.  7.1. 

Trade name(s) Kenodin 5000IodoDip 5000JOD 5000Bio Tec Jodip 5000Bühning Jodfilmdip-SuperIocid 5000Iod protect 5000 FilmIOD protect 5000 FilmIocidIodip+Protetos cuaIodin Teat Dip 5000 
Authorisation number EU-0022265-0015 1-12
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,5
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,9
 7.2. 

Trade name(s) Kenodin SD 5000IodoSD 5000IODOSPRAY 5000Bio Tec Jodspray 5000IDip+ 5000Bühning Jodspray 5000Iod protect 5000 SprühKenodin Film SprayIOD protect 5000 SprühIodin Spray & Dip 5000 
Authorisation number EU-0022265-0016 1-12
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,5
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,0
Alcohols, C12-15, ethoxylated Alcohols, C12-15, ethoxylated Non-active Substance 68131-39-5 500-195-7 2,9
