
Article 1 
Annex I to Implementing Decision (EU) 2019/1616 is amended in accordance with Annex I to this Decision.
Article 2 
Annex II to Implementing Decision (EU) 2019/1616 is amended in accordance with Annex II to this Decision.
Article 3 
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
Done at Brussels, 16 April 2020.
For the Commission
The President
Ursula VON DER LEYEN
ANNEX I

Annex I to Implementing Decision (EU) 2019/1616 is amended as follows:

((1)) entry No 8 is replaced by the following:
'
8. EN 13445-3:2014Unfired pressure vessels – Part 3: DesignEN 13445-3:2014/A1:2015EN 13445-3:2014/A2:2016EN 13445-3:2014/A3:2017EN 13445-3:2014/A4:2018EN 13445-3:2014/A5:2018EN 13445-3:2014/A6:2019EN 13445-3:2014/A7:2019EN 13445-3:2014/A8:2019'
((2)) the following entries are added:

No Reference of the standard
‘15. EN ISO 4126-1:2013Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2013)EN ISO 4126-1:2013/A2:2019
16. EN 10217-1:2019Welded steel tubes for pressure purposes – Technical delivery conditions – Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
17. EN 10217-2:2019Welded steel tubes for pressure purposes – Technical delivery conditions – Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
18. EN 10217-3:2019Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
19. EN 10217-4:2019Welded steel tubes for pressure purposes – Technical delivery conditions – Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
20. EN 10217-5:2019Welded steel tubes for pressure purposes – Technical delivery conditions – Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
21. EN 10217-6:2019Welded steel tubes for pressure purposes – Technical delivery conditions – Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
22. EN 13480-1:2017Metallic industrial piping – Part 1: GeneralEN 13480-1:2017/A1:2019
23. EN 13480-6:2017Metallic industrial piping – Part 6: Additional requirements for buried pipingEN 13480-6:2017/A1:2019’.

ANNEX II

In Annex II to Implementing Decision (EU) 2019/1616 the following entries are added:

No Reference of the standard Date of withdrawal
‘13. EN 10217-1:2002Welded steel tubes for pressure purposes – Technical delivery conditions – Part 1: Non-alloy steel tubes with specified room temperature propertiesEN 10217-1:2002/A1:2005 20 April 2021
14. EN 10217-2:2002Welded steel tubes for pressure purposes – Technical delivery conditions – Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature propertiesEN 10217-2:2002/A1:2005 20 April 2021
15. EN 10217-3:2002Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Alloy fine grain steel tubesEN 10217-3:2002/A1:2005 20 April 2021
16. EN 10217-4:2002Welded steel tubes for pressure purposes – Technical delivery conditions – Part 4: Electric welded non-alloy steel tubes with specified low temperature propertiesEN 10217-4:2002/A1:2005 20 April 2021
17. EN 10217-5:2002Welded steel tubes for pressure purposes – Technical delivery conditions – Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature propertiesEN 10217-5:2002/A1:2005 20 April 2021
18. EN 10217-6:2002Welded steel tubes for pressure purposes – Technical delivery conditions – Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature propertiesEN 10217-6:2002/A1:2005 20 April 2021
19. EN 13480-1:2017Metallic industrial piping – Part 1: General 20 April 2020
20. EN 13480-6:2017Metallic industrial piping – Part 6: Additional requirements for buried piping 20 April 2020
21. EN ISO 4126-1:2013Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2013) 20 April 2020’
