
Article 1 
A Union authorisation with authorisation number EU-0020541-0000 is granted to Boumatic Gascoigne Melotte for the making available on the market and use of the biocidal product family ‘Boumatic Iodine product family’, in accordance with the summary of the biocidal product characteristics set out in the Annex.
The Union authorisation is valid from 18 November 2019 until 31 October 2029.
Article 2 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 22 October 2019.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX
Boumatic Iodine product family
Product type 3 — Veterinary hygiene (Disinfectants)
Authorisation number: EU-0020541-0000
R4BP asset number: EU-0020541-0000

PART I
1.  1.1. 

Name Boumatic Iodine product family
 1.2. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 1.3. 

Name and address of the authorisation holder Name Boumatic Gascoigne Melotte
Address 31, Rue Jules Melotte, 4350, Remicourt, Belgium
Authorisation number EU-0020541-0000
R4BP asset number EU-0020541-0000
Date of the authorisation 18 November 2019
Expiry date of the authorisation 31 October 2029
 1.4. 

Name of manufacturer Christeyns n.v.
Address of manufacturer Afrikalaan 182, 9000 Ghent Belgium
Location of manufacturing sites Afrikalaan 182, 9000 Ghent Belgium
 1.5. 

Active substance Iodine
Name of manufacturer Christeyns n.v.
Address of manufacturer Afrikalaan 182, 9000 Ghent Belgium
Location of manufacturing sites Cosayach Nitratos S.A, Oficina Cala Cala S/N, Pozo Almonte Iquique Chile

2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,26 0,5
Fatty alcohol ethoxylate  Non-active substance 69011-36-5 500-241-6 1,0 2,99
 2.2. 

Formulation(s) AL — Any other liquid

PART II 1.  1.1. 

Identifier meta SPC 1
 1.2. 

Number 1-1
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,44 0,5
Fatty alcohol ethoxylate  Non-active substance 69011-36-5 500-241-6 1,0 2,99
 2.2. 

Formulation(s) AL — Any other liquid
 3. 

Hazard statements Causes serious eye irritation.Harmful to aquatic life with long lasting effects.
Precautionary statements Wash hands thoroughly after handling.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice.Avoid release to the environment.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorTeat disinfectants for pre- or post-milking manual dip treatment of cow teats
Application method(s) Open system: dip treatmentFor pre-milking: min. 1 minute contact timeFor post-milking min. 5 minutes contact time
Application rate(s) and frequency Apply an amount of product that is sufficient to cover the entire teat, at the maximum 10 ml per treatment — Product is ready to useUse 2 times per day
Category(ies) of users Professional
Pack sizes and packaging material 20kg, 60kg, 200kg, 210kg high-density polyethylene (HDPE) drum and 1 000kg HDPE
 4.1.1. 
Product for disinfection of cow teat by dipping before or after milking.

Apply an amount of product that is sufficient to cover the entire teat, at the maximum 10 ml per dip treatment.

Fill the dipping cup with indicated quantity of undiluted product straight from the original packaging. During every treatment, sufficient volume of treatment product needs to be present in the dipping cup. To reduce dermal exposure, the use of a dosing pump for filling the product into the application equipment is recommended.
 4.1.2. 
Wear protective chemical resistant gloves (glove material to be specified by the authorisation holder in the product information) and eye protection.
 4.1.3. 
See general directions for use of the meta SPC 1
 4.1.4. 
See general directions for use of the meta SPC 1
 4.1.5. 
See general directions for use of the meta SPC 1
 4.2. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorTeat disinfectants for pre- or post-milking, manual spray treatment of cow teat
Application method(s) Open system: spray treatmentor pre-milking: min. 1 minute contact timeor post-milking min. 5 minutes contact time
Application rate(s) and frequency Apply an amount of product that is sufficient to cover the entire teat, at the maximum 15ml per spray — Product is ready to useUse 2 times per day
Category(ies) of users Professional
Pack sizes and packaging material 20kg, 60kg, 200kg, 210kg HDPE drum and 1 000kg HDPE Intermediate bulk containers (IBC)
 4.2.1. 
Product for disinfection of cow teat by spraying before or after milking.

Apply an amount of product that is sufficient to cover the entire teat at the maximum 15 ml per spray treatment.

Fill the spray flask with the indicated quantity of undiluted product straight from the original packaging. To reduce dermal exposure, use of a dosing pump for filling the product into the application equipment is recommended.
 4.2.2. 
Wear protective chemical resistant gloves (glove material to be specified by the authorisation holder in the product information), protective clothing, chemical resistant boots, and eye protection.
 4.2.3. 
See general directions for use of the meta SPC 1
 4.2.4. 
See general directions for use of the meta SPC 1
 4.2.5. 
See general directions for use of the meta SPC 1
 4.3. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorTeat disinfectants for pre- or post-milking, automated dip treatment of cow teat
Application method(s) Open system: dip treatmentFor pre-milking: min. 1 minute contact timeFor post-milking min. 5 minutes contact time
Application rate(s) and frequency Apply an amount of product that is sufficient to cover the entire teat, at the maximum 10 ml per dip — Product is ready to useUse 3 times per day
Category(ies) of users Professional
Pack sizes and packaging material 20kg, 60kg, 200kg, 210kg HDPE drum and 1 000kg HDPE IBC
 4.3.1. 
Product for disinfection of cow teat by dipping before or after milking.

Apply an amount of product that is sufficient to cover the entire teat, at the maximum 10 ml per dip treatment.

Use the undiluted product straight from the original packaging. To reduce dermal exposure, use of a dosing pump for filling the product into the application equipment is recommended.
 4.3.2. 
See general directions for use of the meta SPC 1
 4.3.3. 
See general directions for use of the meta SPC 1
 4.3.4. 
See general directions for use of the meta SPC 1
 4.3.5. 
See general directions for use of the meta SPC 1
 4.4. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorTeat disinfectants for pre- or post-milking, automated spray treatment of cow teat
Application method(s) Open system: spray treatmentor pre-milking: min. 1 minute contact timeor post-milking min. 5 minutes contact time
Application rate(s) and frequency Apply an amount of product that is sufficient to cover the entire teat, at the maximum 15ml per spray — Product is ready to useUse 3 times per day
Category(ies) of users Professional
Pack sizes and packaging material 20kg, 60kg, 200kg, 210kg HDPE drum and 1 000kg HDPE IBC
 4.4.1. 
Product for disinfection of cow teat by spraying before or after milking.

Apply an amount of product that is sufficient to cover the entire teat, at the maximum of 15 ml per spray treatment.

Use the undiluted product straight from the original packaging. To reduce dermal exposure, use of a dosing pump for filling the product into the application equipment is recommended.
 4.4.2. 
See general directions for use of the meta SPC 1
 4.4.3. 
See general directions for use of the meta SPC 1
 4.4.4. 
See general directions for use of the meta SPC 1
 4.4.5. 
See general directions for use of the meta SPC 1
 5.  5.1. 
The products must be brought to temperatures above 20 °C before use.

For pre-milking treatment: treat the entire teat with the product, let act 60 seconds and wipe teats dry using single-use towels to avoid any contamination of milk.

For post-milking treatment: The teats should be treated as soon as possible after milking in such a way that the teats are fully covered. Let the teats air dry. The cows should be kept in a standing position until the product is fully dried (at least 5 minutes).
 5.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered either for pre- or post-milking disinfection.

Keep out of reach of children.
 5.3. 
First aid: general information: immediately remove any clothing soiled by the product

After inhalation: Supply fresh air; consult doctor in case of complaints.

After skin contact: Wash skin thoroughly. Generally the product does not irritate the skin.

After eye contact: Rinse opened eye for several minutes under running water. Remove contact lenses, if present and easy to do. Continue rinsing.

After swallowing: Rinse out mouth and then drink water. If you feel unwell, get medical advice/attention.

If medical advice is needed, have product container or label at hand.

Do not allow product to enter sewers surface or ground water.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
 5.5. 
Protect from frost. Store in a cool, dry place, away from direct sunlight and out of reach children.

Shelf life: 2 years
 6.  7.  7.1. 

Trade name(s) Udder DipUdder Dip MaxUdder D MaxUdderdine DipUddine DipUdderdine DPUddine DPUdderdine DS
Authorisation number EU-0020541-0001 1-1
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,5
Fatty alcohol ethoxylate  Non-active substance 69011-36-5 500-241-6 2,99
 1.  1.1. 

Identifier meta SPC 2
 1.2. 

Number 1-2
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,26 0,38
Fatty alcohol ethoxylate  Non-active substance 69011-36-5 500-241-6 1,0 2,99
 2.2. 

Formulation(s) AL — Any other liquid
 3. 

Hazard statements Causes serious eye irritation.Harmful to aquatic life with long lasting effects.
Precautionary statements Wash hands thoroughly after handling.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice.Avoid release to the environment.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorTeat disinfection for post –milking, manual dip treatment of cow teats
Application method(s) Open system: dip treatmentFor post-milking min. 5 minutes contact time
Application rate(s) and frequency Apply an amount of product that is sufficient to cover the entire teat, at the maximum 10 ml per treatment — Product is ready to useUse 2 times per day
Category(ies) of users Professional
Pack sizes and packaging material 20kg, 60kg, 200kg, 210kg HDPE drum and 1 000kg HDPE IBC
 4.1.1. 
Product for disinfection of cow teat by dipping after milking.

Fill the dipping cup with the indicated quantity of undiluted product straight from the original packaging. During every treatment, sufficient volume of treatment product needs to be present in the dipping cup. To reduce dermal exposure, use of a dosing pump for filling the product into the application equipment is recommended.
 4.1.2. 
Wear eye protection.
 4.1.3. 
See general directions for use of the meta SPC 2
 4.1.4. 
See general directions for use of the meta SPC 2
 4.1.5. 
See general directions for use of the meta SPC 2
 4.2. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorTeat disinfection for post – milking, anual spray treatment of cow teats
Application method(s) Open system: spray treatmentFor post-milking min. 5 minutes contact time
Application rate(s) and frequency Apply an amount of product that is sufficient to cover the entire teat, at the maximum 15ml per spray treatment — Product is ready to useUse 2 times per day
Category(ies) of users Professional
Pack sizes and packaging material 20kg, 60kg, 200kg, 210kg HDPE drum and 1 000kg HDPE IBC
 4.2.1. 
Product for disinfection of cow teat by spraying after milking.

Apply an amount of product that is sufficient to cover the entire teat, at the maximum 15 ml per spray treatment.

Fill the spray flask with the indicated quantity of undiluted product straight from the original packaging. To reduce dermal exposure, use of a dosing pump for filling the product into the application equipment is recommended.
 4.2.2. 
Wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) and eye protection.
 4.2.3. 
See general directions for use of the meta SPC 2
 4.2.4. 
See general directions for use of the meta SPC 2
 4.2.5. 
See general directions for use of the meta SPC 2
 4.3. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorTeat disinfection for post – milking, utomated dip treatment of cow teats
Application method(s) Open system: dip treatmentFor post-milking min. 5 minutes contact time.
Application rate(s) and frequency Apply an amount of product that is sufficient to cover the entire teat, at the maximum 10ml per dip treatment — Product is ready to use.Use 3 times per day
Category(ies) of users Professional
Pack sizes and packaging material 20kg, 60kg, 200kg, 210kg HDPE drum and 1 000kg HDPE IBC
 4.3.1. 
Product for disinfection of cow teat by dipping after milking.

Apply an amount of product that is sufficient to cover the entire teat, at the maximum 10 ml per dip treatment.

Use the undiluted product straight from the original packaging. To reduce dermal exposure, the use of a dosing pump for filling the product into the application equipment is recommended.
 4.3.2. 
See general directions for use of the meta SPC 2
 4.3.3. 
See general directions for use of the meta SPC 2
 4.3.4. 
See general directions for use of the meta SPC 2
 4.3.5. 
See general directions for use of the meta SPC 2
 4.4. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorTeat disinfection for postmilking, utomated spray treatment of cow teats
Application method(s) Open system: spray treatmentFor post-milking min. 5 minutes contact time
Application rate(s) and frequency Apply an amount of product that is sufficient to cover the entire teat, at the maximum 15ml per spray treatment — Product is ready to useUse 3 times per day
Category(ies) of users Professional
Pack sizes and packaging material 20kg, 60kg, 200kg, 210kg HDPE drum and 1 000kg HDPE IBC
 4.4.1. 
Product for disinfection of cow teat by spraying, after milking.

Apply an amount of product that is sufficient to cover the entire teat, at the maximum of 15 ml per spray treatment

Use the undiluted product straight from the original packaging. To reduce dermal exposure, use of a dosing pump for filling the product into the application equipment is recommended.
 4.4.2. 
See general directions for use of the meta SPC 2
 4.4.3. 
See general directions for use of the meta SPC 2
 4.4.4. 
See general directions for use of the meta SPC 2
 4.4.5. 
See general directions for use of the meta SPC 2
 5.  5.1. 
The products must be brought to temperatures above 20 °C before use.

For post-milking treatment: The teats should be treated as soon as possible after milking in such a way that the teats are fully covered. Let the teats air dry. The cows should be kept in a standing position until the product is fully dried (at least 5 minutes).
 5.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre- milking disinfection.

Keep out of reach of children.
 5.3. 
First aid: general information: immediately remove any clothing soiled by the product

After inhalation: Supply fresh air; consult doctor in case of complaints.

After skin contact: Wash skin thoroughly. Generally the product does not irritate the skin.

After eye contact: Rinse opened eye for several minutes under running water. Remove contact lenses, if present and easy to do. Continue rinsing.

After swallowing: Rinse out mouth and then drink water. If you feel unwell, get medical advice/attention.

If medical advice is needed, have product container or label at hand.

Do not allow product to enter sewers surface or ground water.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
 5.5. 
Protect from frost. Store in a cool, dry place, away from direct sunlight and out of reach of children.

Shelf life: 1 year
 6.  7.  7.1. 

Trade name(s) Gladiator RTUUdder Max BarrierGladiator Max BarrierUdderdine BARRIERUddine BARRIERUdderdine RTUUddine RTUUdderdine BR
Authorisation number EU-0020541-0002 1-2
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,26
Fatty alcohol ethoxylate  Non-active substance 69011-36-5 500-241-6 1,2
 7.2. 

Trade name(s) Udder Star SprayUdder Spray MaxUdderdine SprayUddine SprayUdderdine SPUddine SP
Authorisation number EU-0020541-0003 1-2
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,29
Fatty alcohol ethoxylate  Non-active substance 69011-36-5 500-241-6 2,99
 1.  1.1. 

Identifier meta SPC 3
 1.2. 

Number 1-3
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,43 0,5
Fatty alcohol ethoxylate  Non-active substance 69011-36-5 500-241-6 1,0 2,99
 2.2. 

Formulation(s) AL — Any other liquid
 3. 

Hazard statements Causes serious eye irritation.Harmful to aquatic life with long lasting effects.
Precautionary statements Wash hands thoroughly after handling.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice.Avoid release to the environment.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorTeat disinfection for post –milking, manual dip treatment of cow teats
Application method(s) Open system: dip treatmentFor post-milking min. 5 minutes contact time
Application rate(s) and frequency Apply an amount of product that is sufficient to cover the entire teat, at the maximum 10 ml per treatment — Product is ready to useUse 2 times per day
Category(ies) of users Professional
Pack sizes and packaging material 20kg, 60kg, 200kg, 210kg HDPE drum and 1 000kg HDPE IBC
 4.1.1. 
Product for disinfection of cow teat by dipping after milking.

Fill the dipping cup with the indicated quantity of undiluted product straight from the original packaging. During every treatment, sufficient volume of treatment product needs to be present in the dipping cup To reduce dermal exposure, use of a dosing pump for filling the product into the application equipment is recommended.
 4.1.2. 
Wear protective chemical resistant gloves (glove material to be specified by the authorisation holder in the product information) and eye protection.
 4.1.3. 
See general directions for use of the meta SPC 3
 4.1.4. 
See general directions for use of the meta SPC 3
 4.1.5. 
See general directions for use of the meta SPC 3
 4.2. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorTeat disinfection for post – milking, manual spray treatment of cow teats
Application method(s) Open system: spray treatmentFor post-milking min. 5 minutes contact time
Application rate(s) and frequency Apply an amount of product that is sufficient to cover the entire teat, at the maximum 15ml per spray treatment — Product is ready to useUse 2 times per day
Category(ies) of users Professional
Pack sizes and packaging material 20kg, 60kg, 200kg, 210kg HDPE drum and 1 000kg HDPE IBC
 4.2.1. 
Product for disinfection of cow teat by spraying after milking.

Apply an amount of product that is sufficient to cover the entire teat, at the maximum 15 ml per spray treatment

Fill the spray flask with the indicated quantity of undiluted product straight from the original packaging. To reduce dermal exposure, use of a dosing pump for filling the product into the application equipment is recommended.
 4.2.2. 
Wear protective chemical resistant gloves (glove material to be specified by the authorisation holder in the product information), protective clothing, chemical resistant boots, and eye protection.
 4.2.3. 
See general directions for use of the meta SPC 3
 4.2.4. 
See general directions for use of the meta SPC 3
 4.2.5. 
See general directions for use of the meta SPC 3
 4.3. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorTeat disinfection for post – milking, automated dip treatment of cow teats
Application method(s) Open system: dip treatmentFor post-milking min. 5 minutes contact time.
Application rate(s) and frequency Apply an amount of product that is sufficient to cover the entire teat, at the maximum 10ml per dip treatment — Product is ready to useUse 3 times per day
Category(ies) of users Professional
Pack sizes and packaging material 20kg, 60kg, 200kg, 210kg HDPE drum and 1 000kg HDPE IBC
 4.3.1. 
Productfor disinfection of cow teat by dipping after milking.

Apply an amount of product that is sufficient to cover the entire teat, at the maximum 10 ml per dip treatment.

Use the undiluted product straight from the original packaging. To reduce dermal exposure, use of a dosing pump for filling the product into the application equipment is recommended.
 4.3.2. 
See general directions for use of the meta SPC 3
 4.3.3. 
See general directions for use of the meta SPC 3
 4.3.4. 
See general directions for use of the meta SPC 3
 4.3.5. 
See general directions for use of the meta SPC 3
 4.4. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorTeat disinfection for postmilking, automated spray treatment of cow teats
Application method(s) Open system: spray treatmentFor post-milking min. 5 minutes contact time
Application rate(s) and frequency 15 ml per spray treatment — Product is ready to useUse 3 times per day
Category(ies) of users Professional
Pack sizes and packaging material 20kg, 60kg, 200kg, 210kg HDPE drum and 1 000kg HDPE IBC
 4.4.1. 
Product for disinfection of cow teat by spraying after milking.

Apply an amount of product that is sufficient to cover the entire teat, at the maximum of 15 ml per spray treatment.

Use the undiluted product straight from the original packaging. To reduce dermal exposure, use of a dosing pump for filling the product into the application equipment is recommended.
 4.4.2. 
See general directions for use of the meta SPC 3
 4.4.3. 
See general directions for use of the meta SPC 3
 4.4.4. 
See general directions for use of the meta SPC 3
 4.4.5. 
See general directions for use of the meta SPC 3
 5.  5.1. 
The products must be brought to temperatures above 20 °C before use.

For post-milking treatment: The teats should be treated as soon as possible after milking in such a way that the teats are fully covered. Let the teats air dry. The cows should be kept in a standing position until the product is fully dried (at least 5 minutes).
 5.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre- milking disinfection.

Keep out of reach of children.
 5.3. 
First aid: general information: immediately remove any clothing soiled by the product

After inhalation: Supply fresh air; consult doctor in case of complaints.

After skin contact: Wash skin thoroughly. Generally the product does not irritate the skin.

After eye contact: Rinse opened eye for several minutes under running water. Remove contact lenses, if present and easy to do. Continue rinsing.

After swallowing: Rinse out mouth and then drink water. If you feel unwell, get medical advice/attention.

If medical advice is needed, have product container or label at hand.

Do not allow product to enter sewers surface or ground water.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
 5.5. 
Protect from frost. Store in a cool, dry place, away from direct sunlight and out of reach of children.

Shelf life: 2 years.
 6.  7.  7.1. 

Trade name(s) Udder StarUdder Star MaxUdder S MaxUdderdine StarUddine StarUdderdine STUddine ST
Authorisation number EU-0020541-0004 1-3
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,5
Fatty alcohol ethoxylate  Non-active substance 69011-36-5 500-241-6 2,5
