
Article 1 
The references of the European Assessment Documents for construction products drafted in support of Regulation (EU) No 305/2011 that are listed in Annex to this Decision are hereby published in the Official Journal of the European Union.
Article 2 
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
ANNEX
030219-00-0501 Acoustic spray coating based on a water-based organic binder
030350-00-0402 Liquid applied roof waterproofing kits(superseding technical specification ‘ETAG 005’)
030351-00-0402 Systems of mechanically fastened flexible roof waterproofing sheets(superseding technical specification ‘ETAG 006’)
030352-00-0503 Liquid applied watertight covering kits for wet room floors and/or walls(superseding technical specification ‘ETAG 022-1’)
030378-00-0605 Fully bonded, pre-applied flexible sheet for waterproofing
030400-00-0605 Waterproofing kit based on polymeric membranes for in- and outdoor walls and floors of wet areas and swimming pools
030436-00-0503 Watertight covering kits based on flexible sheets for wet room floors and/or walls(superseding technical specification ‘ETAG 022-2’)
030437-00-0503 Watertight covering kits based on inherently watertight boards for wet room floors and/or walls(superseding technical specification ‘ETAG 022-3’)
040083-00-0404 External Thermal Insulation Composite Systems (ETICS) with renderings(superseding technical specification ‘ETAG 004’)
040419-00-1201 Thermal insulation board made of pressed rigid polyurethane foam
040427-00-0404 Kits for external thermal insulation composite system (ETICS) with mortar as thermal insulation product and renderings or discontinuous claddings as exterior skin
040465-00-0404 ETICS with renderings on mono-layer or multi-layer wall made of timber
040729-00-1201 Thermal insulation made of loose fill mineral wool
040914-00-0404 Veture kits – Prefabricated units for external wall insulation and their fixing devices(superseding technical specification ‘ETAG 017’)
041389-00-1201 Boards made of agglomerated natural cork for thermal and acoustic insulation
050019-00-0601 Dowels for structural joints under static and quasi-static loading(superseding technical specification ‘ETAG 030’)
060012-00-0802 Kit consisting of chimney flue liner, made of glass fibres, mineral and organic substances, and ancillaries
090119-00-0404 Kits for external wall cladding of mineral boards with renderings applied in situ
090120-00-0404 Kits for non-load bearing mineral board external wall systems
120093-00-0107 Flexible asphaltic plug expansion joints for road bridges(superseding technical specification ‘ETAG 032-3’)
120109-00-0107 Nosing expansion joints for road bridges(superseding technical specification ‘ETAG 032-4’)
120110-00-0107 Mat expansion joints for road bridges(superseding technical specification ‘ETAG 032-5’)
120111-00-0107 Cantilever expansion joints for road bridges(superseding technical specification ‘ETAG 032-6’)
120112-00-0107 Supported expansion joints for road bridges(superseding technical specification ‘ETAG 032-7’)
120113-00-0107 Modular expansion joints for road bridges(superseding technical specification ‘ETAG 032-8’)
130031-00-0304 Metal web beams and columns
130082-00-0603 Façade fixing system - plastic bracket for fixing timber or wood based elements to the substructure
130186-00-0603 Three-dimensional nailing plates(superseding technical specification ‘ETAG 015’)
130118-01-0603 Screws and threaded rods for use in timber constructions(superseding EAD 130118-00-0603)
130287-00-0603 Profiled aluminium nail for use in timber structures
130308-00-0304 Structural composite lumber product: Laminated Strand Lumber (LSL)
130336-00-0603 Point connector – Dovetail made of plywood for cross laminated timber
130367-00-0304 Composite wood-based beams and columns(superseding technical specification ‘ETAG 011’)
140022-00-0304 Prefabricated wood-based loadbearing stressed skin panels(superseding technical specification ‘ETAG 019’)
160055-00-0301 Lattice girders for the increase of punching resistance in flat slabs and column
170005-00-0305 Re-cycled clay masonry units
170011-00-0305 Insulating building element for masonry walls
180023-00-0704 Vertical centrifugal storm water flow regulator
200050-02-0102 Gabion boxes, mattresses and sack gabions made of hexagonal regular twisted mesh metallic pre-coated with or without additional organic coating(superseding EAD 200050-01-0102)
210005-00-0505 Internal partition kits for use as non-loadbearing walls(superseding technical specification ‘ETAG 003’)
210046-00-1201 Thin metal composite sheet
220010-01-0402 Flat plastic roofing sheets made of recycled plastic for self-supporting and/or fully supported discontinuous roofing and/or external cladding(superseding EAD 220010-00-0402)
220062-00-0401 Rooflight with bonded or mechanically fastened cover glass
220089-00-0401 Self-supporting translucent roof kits with covering made of plastic sheets(superseding technical specification ‘ETAG 010’)
220116-00-0401 Fixed fire-resistant roof window
260014-00-0301 Calcined layer silicate based type II addition
260017-00-0301 Elastic micro hollow spheres as concrete admixture
260020-00-0301 Calcium carbonate fine as active addition with catalytic binding performance for concrete
330499-01-0601 Bonded fasteners for use in concrete(superseding technical specification ‘ETAG 001-5’ and EAD 330499-00-0601)
331433-00-0601 Injected anchor for thermal insulation boards
331924-00-0602 Decking fixing assemblies
332001-00-0602 Clamping system for connection of precast concrete members
332277-00-0601 Fastener for push-pull props for precast wall/column elements
340275-00-0104 Externally-bonded composite systems with inorganic matrix for strengthening of concrete and masonry structures
340308-00-0203 Timber building kits(superseding technical specification ‘ETAG 007’)
340392-00-0104 CRM (Composite Reinforced Mortar) Systems for strengthening concrete and masonry structures
350865-00-1106 Fire retardant products(superseding technical specification ‘ETAG 028’)