
Article 1 
The references of harmonised standards for machinery drafted in support of Directive 2006/42/EC listed in Annex I to this Decision are hereby published in the Official Journal of the European Union.
The references of harmonised standards drafted in support of Directive 2006/42/EC listed in Annex II to this Decision are hereby published in the Official Journal of the European Union with a restriction.
Article 2 
The references of harmonised standards for machinery drafted in support of Directive 2006/42/EC listed in Annex III to this Decision are hereby withdrawn from the Official Journal of the European Union as from the dates set out in that Annex.
Article 3 
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
ANNEX I

No Reference of the standard Type
1. EN ISO 14118:2018Safety of machinery — Prevention of unexpected start-up (ISO 14118:2017) B
2. EN 1853:2017Agricultural machinery — Trailers – Safety C
3. EN 1870-6:2017Safety of woodworking machines — Circular sawing machines — Part 6: Circular sawing machines for fire wood C
4. EN ISO 4254-5:2018Agricultural machinery — Safety — Part 5: Power-driven soil-working machines (ISO 4254-5:2018) C
5. EN ISO 4254-7:2017Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017) C
6. EN ISO 4254-8:2018Agricultural machinery — Safety — Part 8: Solid fertilizer distributors (ISO 4254-8:2018) C
7. EN ISO 5395-1:2013Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests (ISO 5395-1:2013)EN ISO 5395-1:2013/A1:2018 C
8. EN ISO 5395-3:2013Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)EN ISO 5395-3:2013/A1:2017EN ISO 5395-3:2013/A2:2018 C
9. EN 12013:2018Plastics and rubber machines — Internal mixers — Safety requirements C
10. EN 12999:2011+A2:2018Cranes — Loader cranes C
11. EN 13001-3-1:2012+A2:2018Cranes — General Design — Part 3-1: Limit States and proof competence of steel structure C
12. EN 13001-3-6:2018Cranes — General design — Part 3-6: Limit states and proof of competence of machinery — Hydraulic cylinders C
13. EN 13135:2013+A1:2018Cranes — Safety — Design — Requirements for equipment C
14. EN 13684:2018Garden equipment — Pedestrian controlled lawn aerators and scarifiers – Safety C
15. EN ISO 13766-2:2018Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018) C
16. EN 15194:2017Cycles — Electrically power assisted cycles — EPAC Bicycles C
17. EN 15895:2011+A1:2018Cartridge operated hand-held tools — Safety requirements — Fixing and hard marking tools C
18. EN ISO 16092-1:2018Machine tools safety — Presses — Part 1: General safety requirements (ISO 16092-1:2017) C
19. EN ISO 16092-3:2018Machine tools safety — Presses — Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017) C
20. EN 16719:2018Transport platforms C
21. EN 16952:2018Agricultural machinery — Rough-terrain Work Platforms for Orchard's operations (WPO) – Safety C
22. EN 17059:2018Plating and anodizing lines — Safety requirements C
23. EN ISO 19085-4:2018Woodworking machines — Safety — Part 4: Vertical panel circular sawing machines (ISO 19085-4:2018) C
24. EN ISO 19085-6:2017Woodworking machines — Safety — Part 6: Single spindle vertical moulding machines (‘toupies’) (ISO 19085-6:2017) C
25. EN ISO 19085-8:2018Woodworking machines — Safety — Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017) C
26. EN ISO 19225:2017Underground mining machines — Mobile extracting machines at the face — Safety requirements for shearer loaders and plough systems (ISO 19225:2017) C
27. EN ISO 28927-2:2009Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)EN ISO 28927-2:2009/A1:2017 C
28. EN ISO/IEC 80079-38:2016Explosive atmospheres — Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)EN ISO/IEC 80079-38:2016/A1:2018 C
29. EN 50569:2013Household and similar electrical appliances — Safety — Particular requirements for commercial electric spin extractorsEN 50569:2013/A1:2018 C
30. EN 50570:2013Household and similar electrical appliances — Safety — Particular requirements for commercial electric tumble dryersEN 50570:2013/A1:2018 C
31. EN 50571:2013Household and similar electrical appliances — Safety — Particular requirements for commercial electric washing machinesEN 50571:2013/A1:2018 C
32. EN 50636-2-107:2015Safety of household and similar appliances — Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (IEC 60335-2-107:2012 Modified)EN 50636-2-107:2015/A1:2018 C
33. EN 60335-1:2012Household and similar electrical appliances — Safety — Part 1: General requirements (IEC 60335-1:2010 Modified)EN 60335-1:2012/A11:2014EN 60335-1:2012/A13:2017 C
34. EN 60335-2-58:2005Household and similar electrical appliances — Safety — Part 2-58: Particular requirements for commercial electric dishwashing machines (IEC 60335-2-58:2002 Modified)EN 60335-2-58:2005/A2:2015EN 60335-2-58:2005/A12:2016 C
35. EN 62841-2-1:2018Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-1: Particular requirements for hand-held drills and impact drills (IEC 62841-2-1:2017, Modified)EN 62841-2-1:2018/A11:2019 C
36. EN 62841-2-17:2017Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-17: Particular requirements for hand-held routers (IEC 62841-2-17:2017 Modified) C
37. EN 62841-3-1:2014Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)EN 62841-3-1:2014/A11:2017 C
38. EN 62841-3-4:2016Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016 Modified)EN 62841-3-4:2016/A11:2017 C
39. EN 62841-3-6:2014Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified)EN 62841-3-6:2014/A11:2017 C
40. EN 62841-3-9:2015Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2014 Modified)EN 62841-3-9:2015/A11:2017 C
41. EN 62841-3-10:2015Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-10: Particular requirements for transportable cut-off machines (IEC 62841-3-10:2015 Modified)EN 62841-3-10:2015/A11:2017 C
42. EN 62841-3-14:2017Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-14: Particular requirements for transportable drain cleaners (IEC 62841-3-14:2017 Modified) C
43. EN ISO 18497:2018Agricultural machinery and tractors – Safety of highly automated agricultural machines – Principles for design (ISO 18497:2018) B
44. EN ISO 19353:2019Safety of machinery – Fire prevention and fire protection (ISO 19353:2019) B
45. EN 707:2018Agricultural machinery – Slurry tankers – Safety C
46. EN 1459-2:2015+A1:2018Rough-terrain trucks – Safety requirements and verification – Part 2: Slewing variable-reach trucks C
47. EN ISO 3691-5:2015Industrial trucks – Safety requirements and verification – Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) C
48. EN ISO 4254-9:2018Agricultural machinery – Safety – Part 9: Seed drills (ISO 4254-9:2018) C
49. EN ISO 10517:2019Powered hand-held hedge trimmers – Safety (ISO 10517:2019) C
50. EN ISO 11148-13:2018Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools (ISO 11148-13:2017) C
51. EN 12012-1:2018Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators and shredders C
52. EN 12312-8:2018Aircraft ground support equipment – Specific requirements – Part 8: Maintenance or service stairs and platforms C
53. EN 12733:2018Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety C
54. EN 14033-4:2019Railway applications – Track – Railbound construction and maintenance machines – Part 4: Technical requirements for running, travelling and working on urban rail C
55. EN 16712-4:2018Portable equipment for projecting extinguishing agents supplied by firefighting pumps – Portable foam equipment – Part 4: High expansion foam generators PN16 C
56. EN 16770:2018Safety of woodworking machines – Chip and dust extraction systems for indoor installation – Safety requirements C
57. EN 16985:2018Spray booths for organic coating material – Safety requirements C
58. EN 17067:2018Forestry machinery – Safety requirements on radio remote controls C
59. EN ISO 19296:2018Mining – Mobile machines working underground – Machine safety (ISO 19296:2018) C
60. EN ISO 28927-4:2010Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4:2010)EN ISO 28927-4:2010/A1:2018 C
61. EN 60204-1:2018Safety of machinery – Electrical equipment of machines – Part 1: General requirements (IEC 60204-1:2016, Modified) B
62. EN IEC 60204-11:2019Safety of machinery – Electrical equipment of machines – Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV (IEC 60204-11:2018) B
63. EN 62841-4-2:2019Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-2: Particular requirements for hedge trimmers (IEC 62841-4-2:2017, Modified) C
64. EN 62841-3-12:2019Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-12: Particular requirements for transportable threading machines (IEC 62841-3-12:2017) C
65. EN 62841-2-21:2019Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-21: Particular requirements for hand-held drain cleaners (IEC 62841-2-21:2017, Modified) C
66. EN ISO 20607:2019Safety of machinery – Instruction handbook – General drafting principles (ISO 20607:2019) B
67. EN ISO 19085-7:2019Woodworking machines – Safety – Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019) C
68. EN 1114-3:2019Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs C
69. EN 1127-1:2019Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology B
ANNEX II

No Reference of the standard Type
1. EN 474-1:2006+A5:2018Earth-moving machinery — Safety — Part 1: General requirementsNotice: This publication does not concern clause 5.8.1 Visibility — Operator's field of view of this standard, but only in relation with EN 474-5:2006+A3:2013 requirements for hydraulic excavators, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC. C
2. EN 13241:2003+A2:2016Industrial, commercial, garage doors and gates — Product standard, performance characteristicsNotice: With regard to paragraphs 4.2.2, 4.2.6, 4.3.2, 4.3.3, 4.3.4, 4.3.6, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.3.7 and 1.4.3 of Annex I to Directive 2006/42/EC. C
3. EN ISO 19085-3:2017Woodworking machines – Safety requirements – Part 3: Numerically controlled (NC) boring and routing machinesNotice: With regard to its point 6.6.2.2.3.1, the harmonised standard EN ISO 19085-3:2017 does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.4.1 of Annex I to Directive 2006/42/EC, which requires that guards and protective devices must not be easy to by-pass. C
ANNEX III

No Reference of standard Date of withdrawal Type
1. EN 1037:1995+A1:2008Safety of machinery — Prevention of unexpected start-up 19 September 2020 B
2. EN 474-1:2006+A4:2013Earth-moving machinery — Safety — Part 1: General requirementsNotice: This publication does not concern clause 5.8.1 Visibility — Operator’s field of view of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC. 19 September 2020 C
3. EN 1853:1999+A1:2009Agricultural machinery — Trailers with tipping body – Safety 19 September 2020 C
4. EN 1870-6:2002+A1:2009Safety of woodworking machines — Circular sawing machines — Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading 19 September 2020 C
5. EN ISO 4254-5:2009Agricultural machinery — Safety — Part 5: Power-driven soil-working machines (ISO 4254-5:2008) 19 September 2020 C
6. EN ISO 4254-7:2009Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008) 19 September 2020 C
7. EN 14017:2005+A2:2009Agricultural and forestry machinery — Solid fertilizer distributors – Safety 19 September 2020 C
8. EN ISO 5395-1:2013Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests (ISO 5395-1:2013) 19 September 2020 C
9. EN ISO 5395-3:2013Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)EN ISO 5395-3:2013/A1:2017 19 September 2020 C
10. EN 12013:2000+A1:2008Plastics and rubber machines — Internal mixers — Safety requirements 19 September 2020 C
11. EN 12999:2011+A1:2012Cranes — Loader cranes 19 September 2020 C
12. EN 13001-3-1:2012+A1:2013Cranes — General Design — Part 3-1: Limit States and proof competence of steel structure 19 September 2020 C
13. EN 13135:2013Cranes — Safety — Design — Requirements for equipment 19 September 2020 C
14. EN 13684:2004+A3:2009Garden equipment — Pedestrian controlled lawn aerators and scarifiers – Safety 19 September 2020 C
15. EN 15895:2011Cartridge operated hand-held tools — Safety requirements — Fixing and hard marking tools 19 September 2020 C
16. EN 692:2005+A1:2009Machine tools — Mechanical presses — Safety 19 September 2021 C
17. EN 693:2001+A2:2011Machine tools — Safety — Hydraulic presse 19 March 2021 C
18. EN 13736:2003+A1:2009Safety of machine tools — Pneumatic presses 19 September 2021 C
19. EN 848-1:2007+A2:2012Safety of woodworking machines — One side moulding machines with rotating tool — Part 1: Single spindle vertical moulding machines 19 September 2020 C
20. EN 1710:2005+A1:2008Equipment and components intended for use in potentially explosive atmospheres in underground mines 19 September 2020 C
21. EN 50569:2013Household and similar electrical appliances — Safety — Particular requirements for commercial electric spin extractors 12 January 2021 C
22. EN 50570:2013Household and similar electrical appliances — Safety — Particular requirements for commercial electric tumble dryers 12 January 2021 C
23. EN 50571:2013Household and similar electrical appliances — Safety — Particular requirements for commercial electric washing machines 12 January 2021 C
24. EN 50636-2-107:2015Safety of household and similar appliances — Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (IEC 60335-2-107:2012 Modified) 12 January 2020 C
25. EN 60335-1:2012Household and similar electrical appliances — Safety — Part 1: General requirements (IEC 60335-1:2010 Modified)EN 60335-1:2012/A11:2014 3 May 2020 C
26. EN 60745-2-1:2010Hand-held motor-operated electric tools — Safety — Part 2-1: Particular requirements for drills and impact drills (IEC 60745-2-1:2003 Modified + A1:2008) 19 January 2022 C
27. EN 60745-2-17:2010Hand-held motor-operated electric tools — Safety — Part 2-17: Particular requirements for routers and trimmers (IEC 60745-2-17:2010 Modified) 15 December 2021 C
28. EN 62841-3-1:2014Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) 19 October 2019 C
29. EN 61029-2-4:2011Safety of transportable motor-operated electric tools — Part 2-4: Particular requirements for bench grinders (IEC 61029-2-4:1993 Modified + A1:2001 Modified) 24 June 2020 C
30. EN 62841-3-6:2014Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) 19 October 2019 C
31. EN 62841-3-9:2015Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2014 Modified) 15 November 2019 C
32. EN 62841-3-10:2015Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-10: Particular requirements for transportable cut-off machines (IEC 62841-3-10:2015 Modified) 19 October 2019 C
33. EN 13241:2003+A2:2016Industrial, commercial, garage doors and gates — Product standard, performance characteristics 19 September 2020 C
34. EN 786:1996+A2:2009Garden equipment — Electrically powered walk- behind and hand-held lawn trimmers and lawn edge trimmers — Mechanical safety 19 September 2020 C
35. EN 1870-14:2007+A2:2012Safety of woodworking machines — Circular sawing machines — Part 14: Vertical panel sawing machines 19 September 2020 C
36. EN 61496-1:2013Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests 19 September 2020 C
37. EN ISO 11200:2014Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions 19 September 2020 B
38. EN 1870-13:2007+A2:2012Safety of woodworking machines — Circular sawing machines — Part 13: Horizontal beam panel sawing machines 19 September 2020 C
39. EN ISO 28927-4:2010Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4:2010) 2 April 2020 C
40. EN ISO 19353:2016Safety of machinery – Fire prevention and fire protection (ISO 19353:2015) 2 October 2021 B
41. EN 707:1999+A1:2009Agricultural machinery – Slurry tankers – Safety 2 October 2021 C
42. EN 792-13:2000+A1:2008Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools 2 October 2021 C
43. EN 1889-1:2011Machines for underground mines – Mobile machines working underground – Safety – Part 1: Rubber tyred vehicles 2 October 2021 C
44. EN ISO 3691-5:2014Industrial trucks – Safety requirements and verification – Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014)EN ISO 3691-5:2014/AC:2014 2 October 2021 C
45. EN ISO 10517:2009Powered hand-held hedge trimmers – Safety (ISO 10517:2009)EN ISO 10517:2009/A1:2013 2 October 2021 C
46. EN 12012-1:2007+A1:2008Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators 2 October 2021 C
47. EN 12012-3:2001+A1:2008Plastics and rubber machines – Size reduction machines – Part 3: Safety requirements for shredders 2 October 2021 C
48. EN 12312-8:2005+A1:2009Aircraft ground support equipment – Specific requirements – Part 8: Maintenance stairs and platforms 2 October 2021 C
49. EN 12733:2001+A1:2009Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety 2 October 2021 C
50. EN 12981:2005+A1:2009Coating plants – Spray booths for application of organic powder coating material – Safety requirements 2 October 2021 C
51. EN 13355:2004+A1:2009Coating plants – Combined booths – Safety requirements 2 October 2021 C
52. EN 14018:2005+A1:2009Agricultural and forestry machinery – Seed drills – Safety 2 October 2021 C
53. EN 60204-1:2006Safety of machinery – Electrical equipment of machines – Part 1: General requirements (IEC 60204-1:2005, Modified)EN 60204-1:2006/AC:2010EN 60204-1:2006/A1:2009 2 October 2021 B
54. EN 60204-11:2000Safety of machinery – Electrical equipment of machines – Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV (IEC 60204-11:2000)EN 60204-11:2000/AC:2010 2 October 2021 B
55. EN 848-3:2012Safety of woodworking machines – One side moulding machines with rotating tool – Part 3: Numerically controlled (NC) boring and routing machines 2 October 2021 C
56. EN ISO 28927-2:2009Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) 2 October 2021 C
57. EN 60745-2-21:2009Hand-held motor-operated electric tools – Safety – Part 2-21: Particular requirements for drain cleaners (IEC 60745-2-21:2002, Modified)EN 60745-2-21:2009/A1:2010 2 October 2021 C
58. EN 859:2007+A2:2012Safety of woodworking machines – Hand fed surface planing machines 2 October 2021 C
59. EN 860:2007+A2:2012Safety of woodworking machines – One side thickness planing machines 2 October 2021 C
60. EN 861:2007+A2:2012Safety of woodworking machines – Surface planing and thicknessing machines 2 October 2021 C
61. EN 1114-3:2001+A1:2008Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs 2 October 2021 C
62. EN 1127-1:2011Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology 2 October 2021 B
63. EN 1459-2:2015Rough-terrain trucks – Safety requirements and verification – Part 2: Slewing variable-reach trucks 2 October 2021 C