
Article 1 

1. For the purpose of reporting to the Commission on the implementation of Article 4 of Regulation (EU) 2017/852 in accordance with Article 18(1) of that Regulation, Member States shall use the questionnaire set out in Annex I to this Decision.
2. The information referred to in point 1.1 of Annex I shall be made available to the Commission by 31 January of each year (N) covering the reporting year N-1.The information referred to in point 1.2 of Annex I shall be made available to the Commission by 30 September of each year (N) covering the reporting year N-1.
3. The information referred to in point 1.1 of Annex I shall not be required where a Member State provides the Commission with a copy of the form(s) used to grant or deny written consent on import pursuant to the second subparagraph of Article 4(1) of Regulation (EU) 2017/852 during the reporting year N-1. Member States shall make such copies available at the latest by 31 January of each year (N) covering the reporting year N-1, or they may choose to make them available at any time during the reporting period N-1.
Article 2 

1. For the purpose of reporting to the Commission as required by Article 18(1) of Regulation (EU) 2017/852, with the exception of reporting on the implementation of Article 4 of that Regulation, Member States shall use the questionnaire set out in Annex II to this Decision.
2. The information set out in Annex II shall be made available to the Commission in accordance with the following timetable:
(a) the first report covering the reporting years 2017 and 2018 shall be made available by 1 January 2020 at the latest;
(b) the second report covering the reporting period 2019-2020 shall be made available by 30 September 2021 at the latest;
(c) the third report covering the reporting period 2021-2022 shall be made available by 30 September 2023 at the latest;
(d) the fourth report covering the reporting period 2023-2024 shall be made available by 30 September 2025 at the latest;
(e) the fifth report covering the reporting period 2025-2028 shall be made available by 30 September 2029 at the latest.
Article 3 
This Decision is addressed to the Member States.
Done at Brussels, 25 February 2019.
For the Commission
Karmenu VELLA
Member of the Commission
ANNEX I
Questionnaire 
Article 4 

1. Has the Member State granted written consent to import of mercury or mixtures of mercury for a use allowed in accordance with the second subparagraph of Article 4(1) of Regulation (EU) 2017/852?If yes, provide the following information:
1.1. Mercury and mixtures of mercury as non-waste

((i)) Amount of mercury or mixtures of mercury imported,
((ii)) Intended use(s) of imported mercury or mixtures of mercury (t/y per intended use).
1.2. Mercury as waste

((i)) Amount of mercury waste imported;
((ii)) Intended disposal or recovery operation(s) (t/y per intended operation).

— In case of import intended for an interim disposal or recovery operation, provide information on the intended subsequent non-interim disposal or recovery operation(s).
— In case of import intended for recovery operation(s) other than interim recovery operations, provide information on the intended use of the material resulting from the non-interim recovery operation(s).
ANNEX II
Questionnaire 
Note 1: Where the reply to questions 1.2 and/or 2.1 is ‘yes’, information on related sub-questions 1.2(i) to (v) and/or 2.1(i) shall not be required where all the information is included in a report provided by the Member State in accordance with its reporting obligation established under Article 21 of the Minamata Convention and where the relevant report has been made available to the Commission in accordance with Article 18(3) of Regulation (EU) 2017/852.

Note 2: Responses to questions marked with an asterisk (*) are optional.
 1.  1.1. Have the following manufacturing processes involving the use of mercury and mercury compounds been phased out by the dates referred to in Part I of Annex III to Regulation (EU) 2017/852?
 1.1.1. 
If no, provide the following information:


((i)) Reasons(s) for the perpetuation of this manufacturing process after the phased-out date;
((ii)) Measure(s) taken or planned to phase-out this manufacturing process and associated timetable.
 1.1.2. 
If no, provide the following information:


((i)) Reasons(s) for the perpetuation of this manufacturing process after the phase-out date;
((ii)) Measure(s) taken or planned to phase-out this manufacturing process and associated timetable.
 1.1.3. 
If no, provide the following information:


((i)) Reasons(s) for the perpetuation of this manufacturing process after the phase-out date;
((ii)) Measure(s) taken or planned to phase-out this manufacturing process and associated timetable.
 1.1.4. 
If no, provide the following information:


((i)) Reasons(s) for the perpetuation of this manufacturing process after the phase-out date;
((ii)) Measure(s) taken or planned to phase-out this manufacturing process and associated timetable.
 1.2. 
If yes, provide for each installation concerned the following information:


((i)) Unique identifier that follows the requirements of Directive 2007/2/EC;
((ii)) Annual operational capacity of each installation (t/year) for the years 2017 and following;
((iii)) Whether mercury from primary mercury mining has been or is still used in each of the installations;
((iv)) For the year 2010, the level of direct and indirect release from each installation of mercury and of mercury compounds into air, water and land in terms of per unit production (to be expressed as kg of mercury and mercury compounds per kt of sodium or potassium methylate or ethylate produced);
((v)) For the year 2020 and following, the level of direct and indirect release from each installation of mercury and of mercury compounds into air, water and land in terms of per unit production (to be expressed as kg of mercury and mercury compounds per kt of sodium or potassium methylate or ethylate produced).
 2.  2.1. 
If yes, provide the following information:


((i)) Has the competent authority of the Member State developed and implemented a national plan on artisanal and small-scale gold mining and processing in accordance with Article 9(2) and Annex IV of Regulation (EU) 2017/852?

— If yes, provide an internet link to the national plan on artisanal and small-scale gold mining and processing.
— If no, provide information on the reason(s) for not having developed and implemented a national plan on artisanal and small-scale gold mining and processing and on the measures taken and/or planned to establish such a plan and an associated timetable.
 3.  3.1. 
If yes, provide the following information:


((i)) Nature and scope of the challenges;
((ii)) Measure(s) taken and/or planned to address these challenges and associated timetable.
 4.  4.1. In accordance with Article 18(1)(c) of Regulation (EU) 2017/852, provide the following summary of the information the economic operators have sent to the competent authorities of the Member State under Article 12(1) and (2) of that Regulation:
 4.1.1. 

((i)) Production of chlor-alkali:

— List of installations;
— Unique identifiers that follow the requirements of Directive 2007/2/EC.
((ii)) Cleaning of natural gas:

— List of installations;
— Unique identifiers that follow the requirements of Directive 2007/2/EC.
((iii)) Non-ferrous mining and smelting operations:

— List of installations;
— Unique identifiers that follow the requirements of Directive 2007/2/EC.
 4.1.2. Total amount of mercury waste stored in each installation listed under question 4.1.1(i), (ii) and (iii) on 31 December of each reporting year within each reporting period, expressed in tonnes.
 4.1.3. 

((i)) Total mercury waste sent to facilities undertaking the temporary storage of mercury waste;
((ii)) Total mercury waste sent to facilities undertaking the conversion and, if applicable, the solidification of mercury waste;
((iii)) Total mercury waste sent to facilities undertaking the permanent storage of mercury waste.
 4.2. * Any other relevant information the Member State wishes to make available.
 5.  5.1. 

((i)) A list of sites where stocks of more than 50 metric tonnes of mercury other than mercury waste are located on 31 December of each reporting year, including the unique identifiers that follow the requirements of Directive 2007/2/EC.
((ii)) Total amount of mercury other than mercury waste stored on 31 December of each reporting year at each site identified under (i), expressed in tonnes.
 5.2. 

((i)) A list of sites where more than 50 metric tonnes of mercury waste is accumulated on 31 December of each reporting year, including the unique identifiers that follow the requirements of Directive 2007/2/EC;
((ii)) Total amount of mercury waste accumulated on 31 December of each reporting year at each site identified under (i), expressed in tonnes.
 5.3. 

((i)) A list of sources supplying more than 10 metric tonnes of mercury per year, including the unique identifiers that follow the requirements of Directive 2007/2/EC;
((ii)) Total amount of mercury supplied on 31 December of each reporting year by each source identified under (i), expressed in tonnes.
 6.  6.1. 
If yes, provide the following information:


((i)) Explanation of the challenges faced;
((ii)) Information on measures taken or planned to address the difficulties encountered and associated timetable.
 6.2. * The Member State may share information on other implementation promotion initiatives undertaken or planned.
