
Article 1 
The references of harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union.
Article 2 
The references of harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU, listed in Annex II to this Decision, are hereby withdrawn from the Official Journal of the European Union as from the dates set out in that Annex.
Article 3 
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
ANNEX I

No Reference of the standard
1. EN 1562:2019Founding — Malleable cast irons
2. EN 1563:2018Founding — Spheroidal graphite cast irons
3. EN ISO 4126-2:2019Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices (ISO 4126-2:2018)
4. EN 12516-1:2014+A1:2018Industrial valves — Shell design strength — Part 1: Tabulation method for steel valve shells
5. EN 12516-4:2014+A1:2018Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
6. EN 13136:2013+A1:2018Refrigerating systems and heat pumps — Pressure relief devices and their associated piping — Methods for calculation
7. EN 13445-2:2014Unfired pressure vessels — Part 2: MaterialsEN 13445-2:2014/A1:2016EN 13445-2:2014/A2:2018EN 13445-2:2014/A3:2018
8. EN 13445-3:2014Unfired pressure vessels – Part 3: DesignEN 13445-3:2014/A1:2015EN 13445-3:2014/A2:2016EN 13445-3:2014/A3:2017EN 13445-3:2014/A4:2018EN 13445-3:2014/A5:2018EN 13445-3:2014/A6:2019EN 13445-3:2014/A7:2019EN 13445-3:2014/A8:2019
9. EN 13445-5:2014Unfired pressure vessels — Part 5: Inspection and testingEN 13445-5:2014/A1:2018
10. EN 13445-6:2014Unfired pressure vessels — Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast ironEN 13445-6:2014/A2:2018
11. EN 13480-2:2017Metallic industrial piping — Part 2: MaterialsEN 13480-2:2017/A1:2018EN 13480-2:2017/A2:2018EN 13480-2:2017/A3:2018
12. EN 13480-5:2017Metallic industrial piping — Part 5: Inspection and testingEN 13480-5:2017/A1:2019
13. EN ISO 15494:2018Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system (ISO 15494:2015)
14. EN ISO 21028-2:2018Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 2: Temperatures between – 80 degrees C and – 20 degrees C (ISO 21028-2:2018)
15. EN ISO 4126-1:2013Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2013)EN ISO 4126-1:2013/A2:2019
16. EN 10217-1:2019Welded steel tubes for pressure purposes – Technical delivery conditions – Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
17. EN 10217-2:2019Welded steel tubes for pressure purposes – Technical delivery conditions – Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
18. EN 10217-3:2019Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
19. EN 10217-4:2019Welded steel tubes for pressure purposes – Technical delivery conditions – Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
20. EN 10217-5:2019Welded steel tubes for pressure purposes – Technical delivery conditions – Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
21. EN 10217-6:2019Welded steel tubes for pressure purposes – Technical delivery conditions – Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
22. EN 13480-1:2017Metallic industrial piping – Part 1: GeneralEN 13480-1:2017/A1:2019
23. EN 13480-6:2017Metallic industrial piping – Part 6: Additional requirements for buried pipingEN 13480-6:2017/A1:2019
ANNEX II

No Reference of the standard Date of withdrawal
1. EN 13445-2:2014Unfired pressure vessels — Part 2: MaterialsEN 13445-2:2014/A1:2016EN 13445-2:2014/A2:2018 30 September 2019
2. EN 13445-3:2014Unfired pressure vessels — Part 3: DesignEN 13445-3:2014/A1:2015EN 13445-3:2014/A2:2016EN 13445-3:2014/A3:2017EN 13445-3:2014/A4:2018 30 September 2019
3. EN 13445-5:2014Unfired pressure vessels — Part 5: Inspection and testing 30 September 2019
4. EN 13445-6:2014Unfired pressure vessels — Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron 30 September 2019
5. EN 13480-2:2017Metallic industrial piping — Part 2: Materials 30 September 2019
6. EN 13480-5:2017Metallic industrial piping — Part 5: Inspection and testing 30 September 2019
7. EN 1252-2:2001Cryogenic vessels — Materials — Part 2: Toughness requirements for temperatures between – 80 °C and – 20 °C 30 March 2020
8. EN 1562:2012Founding — Malleable cast irons 30 March 2020
9. EN 1563:2011Founding — Spheroidal graphite cast irons 30 March 2020
10. EN 12516-1:2014Industrial valves — Shell design strength — Part 1: Tabulation method for steel valve shells 30 March 2020
11. EN 12516-4:2014Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel 30 March 2020
12. EN 13136:2013Refrigerating systems and heat pumps — Pressure relief devices and their associated piping — Methods for calculation 30 March 2020
13. EN 10217-1:2002Welded steel tubes for pressure purposes – Technical delivery conditions – Part 1: Non-alloy steel tubes with specified room temperature propertiesEN 10217-1:2002/A1:2005 20 April 2021
14. EN 10217-2:2002Welded steel tubes for pressure purposes – Technical delivery conditions – Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature propertiesEN 10217-2:2002/A1:2005 20 April 2021
15. EN 10217-3:2002Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Alloy fine grain steel tubesEN 10217-3:2002/A1:2005 20 April 2021
16. EN 10217-4:2002Welded steel tubes for pressure purposes – Technical delivery conditions – Part 4: Electric welded non-alloy steel tubes with specified low temperature propertiesEN 10217-4:2002/A1:2005 20 April 2021
17. EN 10217-5:2002Welded steel tubes for pressure purposes – Technical delivery conditions – Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature propertiesEN 10217-5:2002/A1:2005 20 April 2021
18. EN 10217-6:2002Welded steel tubes for pressure purposes – Technical delivery conditions – Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature propertiesEN 10217-6:2002/A1:2005 20 April 2021
19. EN 13480-1:2017Metallic industrial piping – Part 1: General 20 April 2020
20. EN 13480-6:2017Metallic industrial piping – Part 6: Additional requirements for buried piping 20 April 2020
21. EN ISO 4126-1:2013Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2013) 20 April 2020