
Article 1 
The use of the following methods is authorised for grading pig carcases pursuant to Point 1 of Section B.IV of Annex IV to Regulation (EU) No 1308/2013 in Ireland:

((a)) the ‘Hennessy Grading Probe 2 (HGP 2)’ apparatus and the assessment methods related thereto, details of which are given in Part I of the Annex;
((b)) the ‘Hennessy Grading Probe 7 (HGP 7)’ apparatus and the assessment methods related thereto, details of which are given in Part II of the Annex;
((c)) the ‘Fat-O-Meat'er II (FOM II)’ apparatus and the assessment methods related thereto, details of which are given in Part III of the Annex;
((d)) the ‘AutoFom III’ apparatus and the assessment methods related thereto, details of which are given in Part IV of the Annex.
Article 2 
Modifications of the authorised apparatuses or grading methods shall not be allowed, unless those modifications are explicitly authorised by Commission Implementing Decision.
Article 3 
Decision 87/293/EC is repealed.
Article 4 
This Decision is addressed to Ireland.
Done at Brussels, 8 March 2018.
For the Commission
Phil HOGAN
Member of the Commission
ANNEX
PART I
1. The rules provided for in this part shall apply when the grading of pig carcases is carried out by means of the apparatus known as ‘Hennessy Grading Probe 2 (HGP 2)’.

2. The apparatus shall be equipped with a probe of 5,95 millimetres diameter (and of 6,3 millimetres at the blade on top of the probe) containing a photodiode (Siemens LED of the type LYU 260-EO and photodetector of the type 58 MR) and having an operating distance of between 0 and 120 millimetres.

3. 
LMPHGP 2 = 62,89706 – 0,69952 FHGP 2 + 0,09096 MHGP 2

where:

LMPHGP 2the estimated percentage of lean meat in a carcase;FHGP 2the thickness of backfat (including rind) in millimetres, measured 6 centimetres off the midline of the split carcase between the third and fourth last rib;MHGP 2the thickness of muscle in millimetres, measured at the same time and in the same place as FHGP 2.

4. This formula shall be valid for carcases weighing between 60 and 125 kilograms (warm weight).

PART II
1. The rules provided for in this part shall apply when the grading of pig carcases is carried out by means of the apparatus known as ‘Hennessy Grading Probe 7 (HGP 7)’.

2. The apparatus shall be equipped with a probe of 5,95 millimetres diameter (and of 6,3 millimetres at the blade on top of the probe) containing a photodiode (Siemens LED of the type LYU 260-EO and photodetector of the type 58 MR) and having an operating distance of between 0 and 120 millimetres.

3. 
LMPHGP 7 = 63,72237 – 0,75369 FHGP 7 + 0,09205 MHGP 7

where:

LMPHGP 7the estimated percentage of lean meat in a carcase;FHGP 7the thickness of backfat (including rind) in millimetres, measured 6 centimetres off the midline of the split carcase between the third and fourth last rib;MHGP 7the thickness of muscle in millimetres, measured at the same time and in the same place as FHGP 7.

4. This formula shall be valid for carcases weighing between 60 and 125 kilograms (warm weight).

PART III
1. The rules provided for in this part shall apply when the grading of pig carcases is carried out by means of the apparatus known as ‘Fat-O-Meat'er II (FOM II)’.

2. The FOM II consists of an optical probe with a knife, a depth measurement device having an operating distance of between 0 and 125 millimetres and a data acquisition and analysis board. The results of the measurements are converted into estimated lean meat content by the FOM II apparatus itself.

3. 
LMPFOMII = 61,89462 – 0,73771 FFOMII + 0,10897 MFOMII

where:

LMPFOMIIthe estimated percentage of lean meat in a carcase;FFOMIIthe thickness of backfat (including rind) in millimetres, measured 6 centimetres off the midline of the split carcase between the third and fourth last rib;MFOMIIthe thickness of muscle in millimetres, measured at the same time and in the same place as FFOMII.

4. This formula shall be valid for carcases weighing between 60 and 125 kilograms (warm weight).

PART IV
1. The rules provided for in this part shall apply when the grading of pig carcases is carried out by means of the apparatus known as ‘AutoFom III’

2. The apparatus shall be equipped with sixteen 2 MHz ultrasonic transducers (Frontmatec Smørum A/S), with an operating distance between transducers of 25 mm. The ultrasonic data shall comprise measurements of back fat thickness, muscle thickness and related parameters. The results of the measurements are converted into estimates of the percentage of lean meat by using a computer.

3. 
LMPAF3 = 66,63699 – 1,06859 R2P9 – 0,78459 R2P10 + 0,06723 R3P5

where:

LMPAF3the estimated percentage of lean meat in a carcase;R2P9The thickness of skin at the minimum fat thickness (MFT) point in mm, where the MFT is the minimum position of the fat profile, after the skin profile has been subtracted;R2P10minimum fat of the cross-section in mm;R3P5maximum meat measure, equal to the maximum rib position minus minimum fat position converted to mm.

4. This formula shall be valid for carcases weighing between 60 and 125 kilograms (warm weight).
