
Article 1 
Cross laminated timber products covered by the harmonised standard EN 16351 and laminated veneer lumber products covered by the harmonised standard EN 14374 which fulfil the conditions set out in the Annex shall be deemed to satisfy the classes of performance indicated in the Annex without testing.
Article 2 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 3 August 2017.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX
Product Product detail Minimum mean density (kg/m3) Minimum overall thickness (mm) Class
Cross laminated timber products covered by the harmonised standard EN 16351 Minimum layer thickness of 18 mm 350 54 D-s2, d0
Laminated veneer lumber products covered by the harmonised standard EN 14374 Minimum veneer thickness of 3 mm 400 18 D-s2, d0




Product Product detail Minimum mean density (kg/m3) Minimum overall thickness (mm) Class for floorings
Cross laminated timber products covered by the harmonised standard EN 16351 minimum layer thickness of 18 mm and with the surface layer made of pine 430 54 DFL-s1
Cross laminated timber products covered by the harmonised standard EN 16351 minimum layer thickness of 18 mm and with the surface layer made of spruce 400 54 DFL-s1
Laminated veneer lumber products covered by the harmonised standard EN 14374 with a minimum veneer thickness of 3 mm and with the surface layer made of pine 480 15 DFL-s1
Laminated veneer lumber products covered by the harmonised standard EN 14374 with a minimum veneer thickness of 3 mm and with the surface layer made of pine 430 20 DFL-s1
Laminated veneer lumber products covered by the harmonised standard EN 14374 with a minimum veneer thickness of 3 mm and with the surface layer made of spruce 400 15 DFL-s1



