
Article 1 
Tolylfluanid shall be approved as an active substance for use in biocidal products for product-type 21, subject to the specifications and conditions set out in the Annex.
Article 2 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 12 March 2015.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX

Common Name IUPAC NameIdentification Numbers Minimum degree of purity of the active substance Date of approval Expiry date of approval Product type Specific conditions
Tolylfluanid IUPAC Name:N-(Dichlorofluoromethylthio)-N′,N′-dimethyl-N-p-tolylsulfamideEC No: 211-986-9CAS No: 731-27-1 960 g/kg 1 July 2016 31 December 2025 21 The product assessment shall pay particular attention to the exposures, the risks and the efficacy linked to any uses covered by an application for authorisation, but not addressed in the Union level risk assessment of the active substance.In the event that products containing tolylfluanid are subsequently authorised for use by non-professional users, persons making products containing tolylfluanid available on the market for non-professional users shall ensure that the products are supplied with appropriate gloves.For biocidal products, authorisations are subject to the following conditions:
((1)) Products containing tolylfluanid shall not be authorised or used to control the growth and settlement of fouling organisms on freshwater going vessels.
((2)) For industrial or professional users, safe operational procedures and appropriate organisational measures shall be established. Where exposure cannot be reduced to an acceptable level by other means, products shall be used with appropriate personal protective equipment.
((3)) Labels and, where provided, instructions for use shall indicate that children shall be kept away until treated surfaces are dry.
((4)) Labels and, where provided, safety data sheets of products authorised shall indicate that application, maintenance and repair activities shall be conducted within a contained area, on an impermeable hard standing with bunding or on soil covered with an impermeable material to prevent losses and minimise emissions to the environment, and that any losses or waste containing tolylfluanid shall be collected for reuse or disposal.
((5)) For products that may lead to residues in food or feed, the need to set new or to amend existing maximum residue levels (MRLs) in accordance with Regulation (EC) No 470/2009 of the European Parliament and of the Council or Regulation (EC) No 396/2005 of the European Parliament and of the Council shall be verified, and any appropriate risk mitigation measures shall be taken to ensure that the applicable MRLs are not exceeded.For treated articles, the following condition applies:where a treated article has been treated with or intentionally incorporates one or more biocidal products containing tolylfluanid, and where necessary due to the possibility of skin contact as well as the release of tolylfluanid under normal conditions of use of the treated article, the person responsible for placing the treated article on the market shall ensure that the label provides information on the risk of skin sensitisation, as well as the information referred to in the second subparagraph of Article 58(3) of Regulation (EU) No 528/2012.



