
Article 1 
The use of the following methods is authorised for grading pig carcases pursuant to point 1 of Section B.IV of Annex IV to Regulation (EU) No 1308/2013 in Latvia:

((a)) the ‘Intrascope (Optical Probe)’ apparatus and the assessment methods related thereto, details of which are given in Part I of the Annex;
((b)) the ‘Manual method (ZP)’ and the assessment methods related thereto, details of which are given in Part II of the Annex;
((c)) the ‘Pork Grader (PG200)’ apparatus and the assessment methods related thereto, details of which are given in Part III of the Annex;
((d)) the ‘OptiGrade-MCP’ apparatus and the assessment methods related thereto, details of which are given in Part IV of the Annex.
The manual method ZP referred to in point (b) of the first paragraph, shall only be authorised in slaughterhouses:

a)) using an electronic data input method with the limit of slaughters of not more than 500 pigs per week;
b)) having the limit of slaughters of not more than 200 pigs per week.
Article 2 
Notwithstanding the standard presentation laid down in point B.III of Annex IV to Regulation (EU) No 1308/2013, pig carcases in Latvia may be presented without the head, the tail, the forefeet and/or the hind feet before being weighed and graded.
In order to establish quotations for pig carcases on a comparable basis, the following fixed coefficients shall be applied in all cases if some of the following carcase parts are missing:

— for the missing head: 8,345,
— for the missing tail: 0,072,
— for the missing forefeet: 0,764,
— for the missing hind feet: 1,558.
The standard presentation carcase weight shall be calculated according to the formula:
Standard presentation carcase weight = 100 × carcase weight (without missing part(s))/(100 – coefficient(s) for missing part(s))
Article 3 
Modifications of the authorised apparatus or grading methods shall not be allowed, unless those modifications are explicitly authorised by Commission Implementing Decision.
Article 4 
Decision 2005/307/EC is repealed.
Article 5 
This Decision shall apply from 1 January 2016.
Article 6 
This Decision is addressed to the Republic of Latvia.
Done at Brussels, 18 November 2015.
For the Commission
Phil HOGAN
Member of the Commission
ANNEX
Part I
1. The rules provided for in this Part shall apply when the grading of pig carcases is carried out by means of the apparatus termed ‘Intrascope (Optical Probe)’.

2. The apparatus shall be equipped with a hexagonal-shaped probe of a maximum width of 12 mm (and of 19 mm at the blade at the top of the probe) containing a viewing window and a light source, a sliding barrel calibrated in millimetres, and having an operating distance of between 8 and 50 mm.

3. 
ŷ = 66,6708 – 0,3493 × F where:

ŷthe estimated percentage of lean meat in the carcase,Fthe thickness of back fat (including rind), measured on the left side of the carcase behind the last rib 6 cm off the midline of the carcase (in millimetres).

The formula shall be valid for carcases weighing between 60 and 110 kilograms.

Part II
1. The rules provided for in this Part shall apply when the grading of pig carcases is carried out by use of the manual method (ZP).

2. The method may be implemented using a ruler with the grading determined on the basis of the prediction equation. It is based on the manual measurement on the midline of the split carcase of the thickness of the back fat and of the thickness of the muscle.

3. 
ŷ = 60,5214 – 0,2579 × G + 0,0525 × M

where:

ŷthe estimated percentage of lean meat in the carcase,Gthe thickness of muscle on the midline of the split carcase, measured at the shortest distance between the cranial end of the m.gluteus medius and the edge of the canalis vertebralis (in millimetres),Mthe thickness of the back fat (including rind) on the midline of the split carcase, measured at the narrowest place over the m.gluteus medius muscle (in millimetres).

The formula shall be valid for carcases weighing between 60 and 110 kilograms.

Part III
1. The rules provided for in this Part shall apply when the grading of pig carcases is carried out by means of the apparatus called ‘Pork Grader (PG200)’.

2. The apparatus shall be equipped with a measuring probe fitted to the gun-shaped case, a data sheet printer and a gage-test block as well as with an 8-9 mm wide blade and a LED light with an adjacent light receiver (photodetector).

3. 
ŷ = 64,4502 – 0,4364 × F + 0,0381 × M where:

ŷthe estimated percentage of lean meat in the carcase,Fthe thickness of back fat (including rind), measured behind the last rib, 7 cm of the midline of the carcase (in millimetres),Mthe thickness of the muscle, measured behind the last rib, 7 cm of the midline of the carcase (in millimetres).

The formula shall be valid for carcases weighing between 60 and 110 kilograms.

Part IV
1. The rules provided for in this Part shall apply when the grading of pig carcases is carried out by means of the apparatus known as ‘OptiGrade-MCP’.

2. The apparatus shall be equipped with an optical probe of 6 mm in diameter, one infrared photodiode and a photo transistor. The results of the measurements shall be converted into estimated lean meat content by means of a computer.

3. 
ŷ = 66,7787 – 0,4464 × F + 0,0018 × M

where:

ŷthe estimated percentage of lean meat in the carcase,Fthe thickness of back fat (including rind), measured between the last rib and the second to last rib, 7 cm of the midline of the carcase (in millimetres),Mthe thickness of the muscle, measured between the last rib and the second to last rib, 7 cm of the midline of the carcase (in millimetres).

The formula shall be valid for carcases weighing between 60 and 110 kilograms.
