
Article 1 
The goods described in column (1) of the table set out in the Annex shall be classified within the Combined Nomenclature under the CN code indicated in column (2) of that table.
Article 2 
Binding tariff information which does not conform to this Regulation may continue to be invoked in accordance with Article 12(6) of Regulation (EEC) No 2913/92 for a period of three months from the date of entry into force of this Regulation.
Article 3 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 10 July 2014.
For the Commission,
On behalf of the President,
Algirdas ŠEMETA
Member of the Commission
ANNEX

Description of the goods Classification (CN code) Reasons
(1) (2) (3)
A non-self-propelled machine (so-called ‘beach rake machine’) for cleaning sand beaches with dimensions of approximately 4 × 2,3 × 2,3 m.It is used for sifting and cleaning sand of impurities, such as glass, plastic, cigarette butts, straws, cans, stones, sea grass, seaweed, small pieces of wood.The machine levels the sand surface by means of a mouldboard deflector plate. The sand is then sifted through hundreds of stainless steel spring-loaded tines. Finally, the impurities are separated from the sand and carried on a conveyor into a hopper. 8479 10 00 Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 8479 and 8479 10 00.As the machine only sorts or separates rubbish from the sand and not the sand itself, classification under heading 8474 as machinery for sorting or separating mineral substances is excluded (see also the Harmonised System Explanatory Notes (HSEN) to heading 8474, first paragraph, point (I)).As the machine is used for the maintenance (cleaning) of beaches, it is considered to be machinery for public works, building or the like (see also the HSEN to heading 8479, group (II), sub-group (A), fifth paragraph). The machine is therefore to be classified under CN code 8479 10 00 as machinery for public works, building or the like.