
Article 1 
The goods described in column (1) of the table set out in the Annex shall be classified within the Combined Nomenclature under the CN codes indicated in column (2) of that table.
Article 2 
Binding tariff information which does not conform to this Regulation may continue to be invoked in accordance with Article 12(6) of Regulation (EEC) No 2913/92 for a period of three months from the date of entry into force of this Regulation.
Article 3 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 29 April 2014.
For the Commission,
On behalf of the President,
Algirdas ŠEMETA
Member of the Commission
ANNEX

Description of the goods Classification(CN code) Reasons
(1) (2) (3)
A product (so-called ‘radio-controlled socket set’) in a package containing two remote controlled switches and a remote control.Each remote controlled switch is in an individual housing consisting of a plug, a socket, a learning button, a switch and a radio receiver and is designed for a voltage of 230 V and a maximum current of 10 A.The learning button is used for identification between the switch and the remote control. It can also be used as a manual switch.The remote control works within a transmission frequency range of 433,05 - 434,79 MHz over a distance of approximately 30 m and controls both switches independently of each other.The product is used for switching on and off, by remote control, equipment connected to the sockets. 8536 50 80 Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 8536, 8536 50 and 8536 50 80.The remote control controls the switches independently of each other. Consequently, the product cannot be considered as a functional unit within the meaning of note 4 to Section XVI as the individual components do not contribute together to a clearly defined function.Given its objective characteristics, the function of the product is switching on and off, by remote control, the equipment connected to the sockets. Classification under heading 8526 as radio remote control apparatus is therefore excluded.As the product is used as remote controlled switches, the plug and the socket are considered inherent components needed for its operation. Consequently, classification under subheading 8536 69 90 as plugs and sockets is excluded.The product is therefore to be classified under CN code 8536 50 80 as other switches for a voltage exceeding 60 V.