
Article 1 
The goods described in column (1) of the table set out in the Annex shall be classified within the Combined Nomenclature under the CN code indicated in column (2) of that table.
Article 2 
Binding tariff information which does not conform to this Regulation may continue to be invoked in accordance with Article 12(6) of Regulation (EEC) No 2913/92 for a period of three months from the date of entry into force of this Regulation.
Article 3 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 4 February 2014.
For the Commission, On behalf of the President,
Algirdas ŠEMETA
Member of the Commission
ANNEX

Description of the goods Classification(CN code) Reasons
(1) (2) (3)
An apparatus combining a colour monitor of the liquid crystal display (LCD) type and a touch-sensitive surface (so-called ‘monitor with touch screen’) with a diagonal measurement of the screen of approximately 38 cm (15 inches) with:
— a native resolution of 1 024 × 768 pixels,
— supported resolutions of 640 × 350, 720 × 400, 640 × 480, 800 × 600 and 1 024 × 768 pixels,
— an aspect ratio of 4:3,
— a pixel pitch of 0,297 mm,
— a brightness of 250 cd/m2,
— a horizontal viewing angle of 120° and a vertical viewing angle of 100°,
— a response time of 17 ms,
— a contrast ratio of 400:1,
— power and control buttons.It is equipped with the following interfaces:
— a D-Sub,
— a USB and a RS-232 for connecting the touch-sensitive surface to an automatic data-processing (ADP) machine.It has a stand with a tilt and swivel mechanism and a glare free surface.The monitor is presented for use, for example, in point of sale/customer information point terminals. The touch-sensitive surface enables the users to input data into these terminals. The monitor is capable of displaying signals from ADP machines. 8528 51 00 Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, note 3 to Section XVI and by the wording of CN codes 8528 and 8528 51 00.The apparatus is a composite machine performing the function of an X-Y coordinate input device of heading 8471 and of a monitor of heading 8528. Apart from displaying information, the apparatus enables users to input data. Given the design, concept and objective characteristics of the apparatus, namely the monitors’ ability to perform its function independently of the input device, the displaying function constitutes the apparatus’ principal function within the meaning of note 3 to Section XVI. Given its objective characteristics, such as the aspect ratio, the pixel pitch suitable for prolonged close viewing, the brightness, the interfaces commonly used in ADP systems, the tilt and swivel mechanisms and glare free surface, the monitor is considered to be of a kind solely or principally used in an ADP system of heading 8471.The apparatus is therefore to be classified under CN code 8528 51 00 as other monitors of a kind solely or principally used in an automatic data-processing system of heading 8471.