
Article 1 
Annex IV to Directive 2011/65/EU is amended as set out in the Annex to this Directive.
Article 2 

1. Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by the last day of the sixth month after entry into force at the latest. They shall forthwith communicate to the Commission the text of those provisions.When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.
2. Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.
Article 3 
This Directive shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
Article 4 
This Directive is addressed to the Member States.
Done at Brussels, 13 March 2014.
For the Commission
The President
José Manuel BARROSO
ANNEX

In Annex IV to Directive 2011/65/EU the following point 39 is added:
'
39. 

((a)) a compact size of the detector for electrons or ions, where the space for the detector is limited to a maximum of 3 mm/MCP (detector thickness + space for installation of the MCP), a maximum of 6 mm in total, and an alternative design yielding more space for the detector is scientifically and technically impracticable;
((b)) a two-dimensional spatial resolution for detecting electrons or ions, where at least one of the following applies:

((i)) a response time shorter than 25 ns;
((ii)) a sample detection area larger than 149 mm2;
((iii)) a multiplication factor larger than 1,3 × 103.
((c)) a response time shorter than 5 ns for detecting electrons or ions;
((d)) a sample detection area larger than 314 mm2 for detecting electrons or ions;
((e)) a multiplication factor larger than 4,0 × 107.

The exemption expires on the following dates:


((a)) 21 July 2021 for medical devices and monitoring and control instruments;
((b)) 21 July 2023 for in-vitro diagnostic medical devices;
((c)) 21 July 2024 for industrial monitoring and control instruments.
'
