
Article 1 
Annex II to Regulation (EC) No 443/2009 is replaced by the text set out in the Annex to this Regulation.
Article 2 
This Regulation shall enter into force on the seventh day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 30 April 2013.
For the Commission
The President
José Manuel BARROSO
ANNEX

Annex II to Regulation (EC) No 443/2009 is replaced by the following:

‘ANNEX II 
PART A — 1. 

((a)) the manufacturer;
((b)) the type-approval number with its extension;
((c)) the type, variant, and version;
((d)) make and commercial name;
((e)) category of vehicle type-approved;
((f)) total number of new registrations;
((g)) mass;
((h)) the specific emissions of CO2;
((i)) footprint: the wheel base, the track width steering axle and the track width other axle;
((j)) the fuel type and fuel mode;
((k)) engine capacity;
((l)) electric energy consumption;
((m)) code for the innovative technology or group of innovative technologies and the CO2 emissions reduction due to that technology.
 2. The detailed data referred to in point 1 shall be taken from the certificate of conformity of the relevant passenger car or be consistent with the certificate of conformity issued by the manufacturer of the relevant passenger car. Where the certificate of conformity is not used, Member States shall put the necessary measures in place to ensure adequate accuracy in the monitoring procedure. Where both a minimum value and a maximum value are specified for the mass or footprint values referred to in point 1(i) for a passenger car, Member States shall use only the maximum figure for the purposes of this Regulation. In the case of bi-fuelled vehicles (petrol/gas), the certificates of conformity of which bear specific CO2 emissions figures for both types of fuel, Member States shall use only the figure measured for gas.
 3. 

((a)) the sources used for the collection of the detailed data referred to in point 1;
((b)) the total number of new registrations of new passenger cars subject to EC type-approval;
((c)) the total number of new registrations of new individually approved passenger cars;
((d)) the total number of new registrations of new passenger cars approved nationally in small series;
((e)) the percentage of all fuel filling stations on their territory providing E85.

PART B —
Monitoring information which Member States are required to determine in accordance with points 1 and 3 of Part A shall be determined in accordance with the methodology in this Part.
 1. 
Member States shall determine the number of new passenger cars registered within their territory in the respective monitoring year divided into vehicles subject to EC type-approval, individual approvals and national approvals of small series.
 2. 
For each version of each variant of each type of new passenger car, the number of newly registered passenger cars and the detailed data referred to in point 1 of Part A shall be recorded.
 3. The fuel stations in their territory that supply E85 fuel shall be indicated in accordance with Article 6 of Commission Regulation (EU) No 1014/2010.

PART C —
For each year, Member States shall report the information specified in points 1 and 3 of Part A in the following formats:

Aggregated data including general information specified in point 3 of Part A:


Member State 
Year 
Data source 
Total number of new registrations of new passenger cars subject to EC type-approval 
Total number of new registrations of new individually approved passenger cars 
Total number of new registrations of new passenger cars approved nationally in small series 
Percentage of all fuel filling stations providing E85, in accordance with Article 6(1) of Regulation (EU) No 1014/2010 
Total number of fuel filling stations providing E85 where the proportion of those stations exceeds 30 % of all fuel filling stations, in accordance with Article 6(2) of Regulation (EU) No 1014/2010 


Detailed data specified in point 1 of Part A:


Year Manufacturer nameEU standard denomination Manufacturer nameManufacturer denomination Manufacturer nameNational Registry denomination Type-approval number and its extension Type Variant Version Make Commercial name Category of vehicle type-approved Total number of new registrations Mass (kg) Specific emissions of CO2 (g/km) Wheelbase (mm) Track width steering axle (mm) Track width other axle (mm) Fuel type Fuel mode Engine capacity (cm3) Electric energy consumption (Wh/km) Innovative technology or group of innovative technologies code Emissions reduction through innovative technologies (g/km)
Year 1 Manuf. 1 Manuf. 1 Manuf. 1 TAN 1 Type 1 Variant 1 Version 1 … … … … … … … … … … … … … … …
Year 1 Manuf. 1 Manuf. 1 Manuf. 1 TAN 1 Type 1 Variant 1 Version 2 … … … … … … … … … … … … … … …
Year 1 Manuf. 1 Manuf. 1 Manuf. 1 TAN 1 Type 1 Variant 2 Version 1 … … … … … … … … … … … … … … …
Year 1 Manuf. 1 Manuf. 1 Manuf. 1 TAN 1 Type 1 Variant 2 Version 2 … … … … … … … … … … … … … … …



