
Article 1 
Annex IX to Directive 2007/46/EC is replaced by the Annex to this Regulation.
Article 2 
Until 29 April 2010, manufacturers may deliver certificates of conformity which are in accordance with the template as set out in Annex IX to Council Directive 70/156/EEC.
Article 3 
This Regulation shall enter into force on the 29 April 2009.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 7 May 2009.
For the Commission
Günter VERHEUGEN
Vice-President
ANNEX


ANNEX IX  0. 
The certificate of conformity is a statement delivered by the vehicle manufacturer to the buyer in order to assure him that the vehicle he has acquired complies with the legislation in force in the European Union at the time it was produced.

The certificate of conformity also serves the purpose to enable the competent authorities of the Member States to register vehicles without having to require the applicant to supply additional technical documentation.

For these purposes, the certificate of conformity has to include:


((a)) the Vehicle Identification Number;
((b)) the exact technical characteristics of the vehicle (i.e. it is not permitted to mention any range of value in the various entries).
 1.  1.1. 

((a)) SIDE 1, which consists of a statement of compliance by the manufacturer. The same template is common to all vehicle categories.
((b)) SIDE 2, which is a technical description of the main characteristics of the vehicle. The template of side 2 is adapted to each specific vehicle category.
 1.2. The certificate of conformity shall be established in a maximum format A4 (210 × 297 mm) or a folder of maximum format A4.
 1.3. Without prejudice to the provisions in Section O(b), the values and units indicated in the second part shall be those given in the type-approval documentation of the relevant regulatory acts. In case of conformity of production checks the values shall be verified according to the methods laid down in the relevant regulatory acts. The tolerances allowed in those regulatory acts shall be taken into account.
 2.  2.1. Model A of the certificate of conformity (complete vehicle) shall cover vehicles which can be used on the road without requiring any further stage for their approval.
 2.2. 
This is the normal result of the multi-stage approval process (e.g. a bus built by a second stage manufacturer on a chassis built by a vehicle manufacturer).

The additional features added during the multi-stage process shall be described briefly.
 2.3. 
Except for tractors for semi-trailers, certificates of conformity covering chassis-cab vehicles belonging to category N shall be of Model C.

PART I MODEL A1 — SIDE 1 
The undersigned [… (Full name and position)] hereby certifies that the vehicle:


0.1. Make (Trade name of manufacturer): …
0.2. Type: …
Variant (a): …
Version (a): …
0.2.1. Commercial name: …
0.4. Vehicle category: …
0.5. Name and address of manufacturer: …
0.6. Location and method of attachment of the statutory plates: …
Location of the vehicle identification number: …
0.9. Name and address of the manufacturer’s representative (if any): …
0.10. Vehicle identification number: …

conforms in all respects to the type described in approval (… type-approval number including extension number) issued on (… date of issue) and

can be permanently registered in Member States having right/left (b) hand traffic and using metric/imperial (c) units for the speedometer (d).


(Place) (Date): … (Signature): …
 MODEL A2 — SIDE 1 
The undersigned [… (Full name and position)] hereby certifies that the vehicle:


0.1. Make (Trade name of manufacturer): …
0.2. Type: …
Variant (a): …
Version (a): …
0.2.1. Commercial name: …
0.4. Vehicle category: …
0.5. Name and address of manufacturer: …
0.6. Location and method of attachment of the statutory plates: …
Location of the vehicle identification number: …
0.9. Name and address of the manufacturer’s representative (if any): …
0.10. Vehicle identification number: …

conforms in all respects to the type described in approval (… type-approval number including extension number) issued on (… date of issue) and

can be permanently registered in Member States having right/left (b) hand traffic and using metric/imperial (c) units for the speedometer (d).


(Place) (Date): … (Signature): …
 MODEL B — SIDE 1 
The undersigned [… (Full name and position)] hereby certifies that the vehicle:


0.1. Make (Trade name of the manufacturer): …
0.2. Type: …
Variant (a): …
Version (a): …
0.2.1. Commercial name: …
0.4. Vehicle category: …
0.5. Name and address of the manufacturer: …
0.6. Location and method of attachment of the statutory plates: …
Location of the vehicle identification number: …
0.9. Name and address of the manufacturer’s representative (if any): …
0.10. Vehicle identification number: …

((a)) has been completed and altered (1) as follows: … and
((b)) conforms in all respects to the type described in approval (… type-approval number including extension number) issued on (… date of issue) and
((c)) can be permanently registered in Member States having right/left (b) hand traffic and using metric/imperial (c) units for the speedometer (d).


(Place) (Date): … (Signature): …

Attachments: Certificate of conformity delivered at each previous stage.
 SIDE 2  1. Number of axles: … and wheels: …
 3. Powered axles (number, position, interconnection): … …
 4. 

4.1. Axle spacing:

 1-2: … mm
 2-3: … mm
 3-4: … mm
 5. Length: … mm
 6. Width: … mm
 7. Height: … mm
 13. Mass of the vehicle in running order: … kg (f)
 16. 

16.1. Technically permissible maximum laden mass: … kg
16.2. Technically permissible mass on each axle:

1.. … kg
2.. … kg
3.. … kg etc.
16.4. Technically permissible maximum mass of the combination: … kg
 18. 

18.1. Drawbar trailer: … kg
18.3. Centre-axle trailer: … kg
18.4. Unbraked trailer: … kg
 19. Technically permissible maximum static vertical mass at the coupling point: … kg
 20. Manufacturer of the engine: …
 21. Engine code as marked on the engine: …
 22. Working principle: …
 23. 

23.1. Hybrid [electric] vehicle: yes/no (1)
 24. Number and arrangement of cylinders: …
 25. Engine capacity: … cm3
 26. 

26.1. Mono fuel/Bi fuel/Flex fuel (1)
 27. Maximum net power (g): … kW at … min-1 or maximum continuous rated power (electric motor) … kW (1)
 29. Maximum speed: … km/h
 30. 

1.. … mm
2.. … mm
3.. … mm
 35. Tyre/wheel combination (h): …
 36. Trailer brake connections mechanical/electric/pneumatic/hydraulic (1)
 38. Code for bodywork (i): …
 40. Colour of vehicle (j): …
 41. Number and configuration of doors: …
 42. 

42.1. Seat(s) designated for use only when the vehicle is stationary: …
42.3. Number of wheelchair user accessible position: …
 46. 
Stationary: … dB(A) at engine speed: … min-1

Drive-by: … dB(A)
 47. Exhaust emission level (l): Euro …
 48. 
Number of the base regulatory act and latest amending regulatory act applicable: …


1.1. test procedure: Type I or ESC (1)

 CO: …
 HC: …
 NOx: …
 HC + NOx: …
 Particulates: …
Smoke opacity (ELR): … (m-1)
1.2. test procedure: Type I (Euro 5 or 6 (1))

 CO: …
 THC: …
 NMHC: …
 NOx: …
 THC + NOx: …
 Particulates (mass): …
 Particles (number): …
2. test procedure: ETC (if applicable)

 CO: …
 NOx: …
 NMHC: …
 THC: …
 CH4: …
 Particulates: …


48.1. Smoke corrected absorption coefficient: … (m-1)
 49. 

1.. all power train except pure electric vehicles

 CO2 emissions Fuel consumption
Urban conditions: … g/km … l/100 km/m3/100 km (1)
Extra-urban conditions: … g/km … l/100 km/m3/100 km (1)
Combined: … g/km … l/100 km/m3/100 km (1)
Weighted, combined … g/km … l/100 km
2.. pure electric vehicles and OVC hybrid electric vehicles
Electric energy consumption (weighted, combined (1))… Wh/kmElectric range… km
 51. For special purpose vehicles: designation in accordance with Annex II Section 5: …
 52. Remarks (n): …
 SIDE 2  1. 

1.1. Number and position of axles with twin wheels: …
 2. Steered axles (number, position): …
 3. Powered axles (number, position, interconnection): … …
 4. 

4.1. Axle spacing:

 1-2: … mm
 2-3: … mm
 3-4: … mm
 5. Length: … mm
 6. Width: … mm
 7. Height: … mm
 9. Distance between the front end of the vehicle and the centre of the coupling device: … mm
 12. Rear overhang: … mm
 13. 

13.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg etc.
 16. 

16.1. Technically permissible maximum laden mass: … kg
16.2. Technically permissible mass on each axle:

1.. … kg
2.. … kg
3.. … kg etc.
16.3. Technically permissible mass on each axle group:

1.. … kg
2.. … kg
3.. … kg etc.
16.4. Technically permissible maximum mass of the combination: … kg
 17. 

17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:

1.. … kg
2.. … kg
3.. … kg
17.3. Intended registration/in service maximum permissible laden mass on each axle group:

1.. … kg
2.. … kg
3.. … kg
17.4. Intended registration/in service maximum permissible mass of the combination: … kg
 18. 

18.1. Drawbar trailer: … kg
18.3. Centre-axle trailer: … kg
18.4. Unbraked trailer: … kg
 19. Technically permissible maximum static mass at the coupling point: … kg
 20. Manufacturer of the engine: …
 21. Engine code as marked on the engine: …
 22. Working principle: …
 23. 

23.1. Hybrid [electric] vehicle: yes/no (1)
 24. Number and arrangement of cylinders: …
 25. Engine capacity: … cm3
 26. 

26.1. Mono fuel/Bi fuel/Flex fuel (1)
 27. Maximum net power (g): … kW at … min-1 or maximum continuous rated power (electric motor) … kW (1)
 28. Gearbox (type): …
 29. Maximum speed: … km/h
 30. 

1.. … mm
2.. … mm
3.. … mm
 33. Drive axle(s) fitted with air suspension or equivalent: yes/no (1)
 35. Tyre/wheel combination (h): …
 36. Trailer brake connections mechanical/electric/pneumatic/hydraulic (1)
 37. Pressure in feed line for trailer braking system: … bar
 38. Code for bodywork (i): …
 39. Class of vehicle: class I/Class II/Class III/Class A/Class B (1)
 41. Number and configuration of doors: …
 42. 

42.1. Seat(s) designated for use only when the vehicle is stationary: …
42.3. Number of wheelchair user accessible position: …
 43. Number of standing places: …
 44. Approval number or approval mark of coupling device (if fitted): …
 45.1. Characteristics values (1): D: …/ V: …/ S: …/ U: …
 46. 
Stationary: … dB(A) at engine speed: … min-1

Drive-by: … dB(A)
 47. Exhaust emission level (l): Euro …
 48. 
Number of the base regulatory act and latest amending regulatory act applicable: …


1.1. test procedure: Type I or ESC (1)

 CO: …
 HC: …
 NOx: …
 HC + NOx: …
 Particulates: …
Smoke opacity (ELR): … (m-1)
1.2. test procedure: Type I (Euro 5 or 6 (1))

 CO: …
 THC: …
 NMHC: …
 NOx: …
 THC + NOx: …
 Particulates (mass): …
 Particles (number): …
2. test procedure: ETC (if applicable)

 CO: …
 NOx: …
 NMHC: …
 THC: …
 CH4: …
 Particulates: …


48.1. Smoke corrected absorption coefficient: … (m-1)
 51. For special purpose vehicles: designation in accordance with Annex II Section 5: …
 52. Remarks (n): …
 SIDE 2  1. 

1.1. Number and position of axles with twin wheels: …
 2. Steered axles (number, position): …
 3. Powered axles (number, position, interconnection): … …
 4. 

4.1. Axle spacing:

 1-2: … mm
 2-3: … mm
 3-4: … mm
 5. Length: … mm
 6. Width: … mm
 7. Height: … mm
 9. Distance between the front end of the vehicle and the centre of the coupling device: … mm
 12. Rear overhang: … mm
 13. 

13.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg etc.
 16. 

16.1. Technically permissible maximum laden mass: … kg
16.2. Technically permissible mass on each axle:

1.. … kg
2.. … kg
3.. … kg etc.
16.3. Technically permissible mass on each axle group:

1.. … kg
2.. … kg
3.. … kg etc.
16.4. Technically permissible maximum mass of the combination: … kg
 17. 

17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:

1.. … kg
2.. … kg
3.. … kg
17.3. Intended registration/in service maximum permissible laden mass on each axle group:

1.. … kg
2.. … kg
3.. … kg
17.4. Intended registration/in service maximum permissible mass of the combination: … kg
 18. 

18.1. Drawbar trailer: … kg
18.3. Centre-axle trailer: … kg
18.4. Unbraked trailer: … kg
 19. Technically permissible maximum static mass at the coupling point: … kg
 20. Manufacturer of the engine: …
 21. Engine code as marked on the engine: …
 22. Working principle: …
 23. 

23.1. Hybrid [electric] vehicle: yes/no (1)
 24. Number and arrangement of cylinders: …
 25. Engine capacity: … cm3
 26. 

26.1. Mono fuel/Bi fuel/Flex fuel (1)
 27. Maximum net power (g): … kW at … min-1 or maximum continuous rated power (electric motor) … kW (1)
 28. Gearbox (type): …
 29. Maximum speed: … km/h
 30.1. Track of each steered axle: … mm
 30.2. Track of all other axles: … mm
 32. Position of loadable axle(s): …
 33. Drive axle(s) fitted with air suspension or equivalent: yes/no (1)
 35. Tyre/wheel combination (h): …
 36. Trailer brake connections mechanical/electric/pneumatic/hydraulic (1)
 37. Pressure in feed line for trailer braking system: … bar
 38. Code for bodywork (i): …
 39. Class of vehicle: class I/Class II/Class III/Class A/Class B (1)
 41. Number and configuration of doors: …
 42. 

42.1. Seat(s) designated for use only when the vehicle is stationary: …
42.2. Number of passenger seating positions: … (lower deck) … (upper deck) (including the driver)
42.3. Number of wheelchair user accessible position: …
 43. Number of standing places: …
 44. Approval number or approval mark of coupling device (if fitted): …
 45.1. Characteristics values (1): D: …/ V: …/ S: …/ U: …
 46. 
Stationary: … dB(A) at engine speed: … min-1

Drive-by: … dB(A)
 47. Exhaust emission level (l): Euro …
 48. 
Number of the base regulatory act and latest amending regulatory act applicable: …


1.. test procedure: Type I or ESC (1)

 CO: …
 HC: …
 NOx: …
 HC + NOx: …
 Particulates: …
Smoke opacity (ELR): … (m-1)
2.. test procedure: ETC (if applicable)

 CO: …
 NOx: …
 NMHC: …
 THC: …
 CH4: …
 Particulates: …


48.1. Smoke corrected absorption coefficient: … (m-1)
 51. For special purpose vehicles: designation in accordance with Annex II Section 5: …
 52. Remarks (n): …
 SIDE 2  1. 

1.1. Number and position of axles with twin wheels: …
 3. Powered axles (number, position, interconnection): … …
 4. 

4.1. Axle spacing:

 1-2: … mm
 2-3: … mm
 3-4: … mm
 5. Length: … mm
 6. Width: … mm
 7. Height: … mm
 8. Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): … mm
 9. Distance between the front end of the vehicle and the centre of the coupling device: … mm
 11. Length of the loading area: … mm
 13. 

13.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg
 16. 

16.1. Technically permissible maximum laden mass: … kg
16.2. Technically permissible mass on each axle:

1.. … kg
2.. … kg
3.. … kg etc.
16.4. Technically permissible maximum mass of the combination: … kg
 18. 

18.1. Drawbar trailer: … kg
18.2. Semi-trailer: … kg
18.3. Centre-axle trailer: … kg
18.4. Unbraked trailer: … kg
 19. Technically permissible maximum static mass at the coupling point: … kg
 20. Manufacturer of the engine: …
 21. Engine code as marked on the engine: …
 22. Working principle: …
 23. 

23.1. Hybrid [electric] vehicle: yes/no (1)
 24. Number and arrangement of cylinders: …
 25. Engine capacity: … cm3
 26. 

26.1. Mono fuel/Bi fuel/Flex fuel (1)
 27. Maximum net power (g): … kW at … min-1 or maximum continuous rated power (electric motor) … kW (1)
 28. Gearbox (type): …
 29. Maximum speed: … km/h
 30. 

1.. … mm
2.. … mm
3.. … mm
 35. Tyre/wheel combination (h): …
 36. Trailer brake connections mechanical/electric/pneumatic/hydraulic (1)
 37. Pressure in feed line for trailer braking system: … bar
 38. Code for bodywork (i): …
 40. Colour of vehicle (j): …
 41. Number and configuration of doors: …
 42. Number of seating positions (including the driver) (k): …
 44. Approval number or approval mark of coupling device (if fitted): …
 45.1. Characteristics values (1): D: …/ V: …/ S: …/ U: …
 46. 
Stationary: … dB(A) at engine speed: … min-1

Drive-by: … dB(A)
 47. Exhaust emission level (l): Euro …
 48. 
Number of the base regulatory act and latest amending regulatory act applicable: …


1.1. test procedure: Type I or ESC (1)

 CO: …
 HC: …
 NOx: …
 HC + NOx: …
 Particulates: …
Smoke opacity (ELR): … (m-1)
1.2. test procedure: Type I (Euro 5 or 6 (1))

 CO: …
 THC: …
 NMHC: …
 NOx: …
 THC + NOx: …
 Particulates (mass): …
 Particles (number): …
2. test procedure: ETC (if applicable)

 CO: …
 NOx: …
 NMHC: …
 THC: …
 CH4: …
 Particulates: …


48.1. Smoke corrected absorption coefficient: … (m-1)
 49. 

1.. all power train except pure electric vehicles

 CO2 emissions Fuel consumption
Urban conditions: … g/km … l/100 km/m3/100 km (1)
Extra-urban conditions: … g/km … l/100 km/m3/100 km (1)
Combined: … g/km … l/100 km/m3/100 km (1)
Weighted, combined … g/km … l/100 km
2.. pure electric vehicles and OVC hybrid electric vehicles
Electric energy consumption (weighted, combined (1))… Wh/kmElectric range… km
 50. Type-approved according to the design requirements for transporting dangerous goods: yes/class(es): …/no (l):
 51. For special purpose vehicles: designation in accordance with Annex II Section 5: …
 52. Remarks (n): …
 SIDE 2  1. 

1.1. Number and position of axles with twin wheels: …
 2. Steered axles (number, position): …
 3. Powered axles (number, position, interconnection): … …
 4. 

4.1. Axle spacing:

 1-2: … mm
 2-3: … mm
 3-4: … mm
 5. Length: … mm
 6. Width: … mm
 8. Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): … mm
 9. Distance between the front end of the vehicle and the centre of the coupling device: … mm
 11. Length of the loading area: … mm
 12. Rear overhang: … mm
 13. 

13.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg
 16. 

16.1. Technically permissible maximum laden mass: … kg
16.2. Technically permissible mass on each axle:

1.. … kg
2.. … kg
3.. … kg etc.
16.3. Technically permissible mass on each axle group:

1.. … kg
2.. … kg
3.. … kg etc.
16.4. Technically permissible maximum mass of the combination: … kg
 17. 

17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:

1.. … kg
2.. … kg
3.. … kg
17.3. Intended registration/in service maximum permissible laden mass on each axle group:

1.. … kg
2.. … kg
3.. … kg
17.4. Intended registration/in service maximum permissible mass of the combination: … kg
 18. 

18.1. Drawbar trailer: … kg
18.2. Semi-trailer: … kg
18.3. Centre-axle trailer: … kg
18.4. Unbraked trailer: … kg
 19. Technically permissible maximum static mass at the coupling point: … kg
 20. Manufacturer of the engine: …
 21. Engine code as marked on the engine: …
 22. Working principle: …
 23. 

23.1. Hybrid [electric] vehicle: yes/no (1)
 24. Number and arrangement of cylinders: …
 25. Engine capacity: … cm3
 26. 

26.1. Mono fuel/Bi fuel/Flex fuel (1)
 27. Maximum net power (g): … kW at … min-1 or maximum continuous rated power (electric motor) … kW (1)
 28. Gearbox (type): …
 29. Maximum speed: … km/h
 31. Position of retractable axle(s): …
 32. Position of loadable axle(s): …
 33. Drive axle(s) fitted with air suspension or equivalent: yes/no (1)
 35. Tyre/wheel combination (h): …
 36. Trailer brake connections mechanical/electric/pneumatic/hydraulic (1)
 37. Pressure in feed line for trailer braking system: … bar
 38. Code for bodywork (i): …
 41. Number and configuration of doors: …
 42. Number of seating positions (including the driver) (k): …
 44. Approval number or approval mark of coupling device (if fitted): …
 45.1. Characteristics values (1): D: …/ V: …/ S: …/ U: …
 46. 
Stationary: … dB(A) at engine speed: … min-1

Drive-by: … dB(A)
 47. Exhaust emission level (l): Euro …
 48. 
Number of the base regulatory act and latest amending regulatory act applicable: …


1.1. test procedure: Type I or ESC (1)

 CO: …
 HC: …
 NOx: …
 HC + NOx: …
 Particulates: …
Smoke opacity (ELR): … (m-1)
1.2. test procedure: Type I (Euro 5 or 6 (1))

 CO: …
 THC: …
 NMHC: …
 NOx: …
 THC + NOx: …
 Particulates (mass): …
 Particles (number): …
2. test procedure: ETC (if applicable)

 CO: …
 NOx: …
 NMHC: …
 THC: …
 CH4: …
 Particulates: …


48.1. Smoke corrected absorption coefficient: … (m-1)
 50. Type-approved according to the design requirements for transporting dangerous goods: yes/class(es): …/no (l):
 51. For special purpose vehicles: designation in accordance with Annex II Section 5: …
 52. Remarks (n): …
 SIDE 2  1. 

1.1. Number and position of axles with twin wheels: …
 2. Steered axles (number, position): …
 3. Powered axles (number, position, interconnection): … …
 4. 

4.1. Axle spacing:

 1-2: … mm
 2-3: … mm
 3-4: … mm
 5. Length: … mm
 6. Width: … mm
 8. Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): … mm
 9. Distance between the front end of the vehicle and the centre of the coupling device: … mm
 11. Length of the loading area: … mm
 12. Rear overhang: … mm
 13. 

13.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg
 16. 

16.1. Technically permissible maximum laden mass: … kg
16.2. Technically permissible mass on each axle:

1.. … kg
2.. … kg
3.. … kg etc.
16.3. Technically permissible mass on each axle group:

1.. … kg
2.. … kg
3.. … kg etc.
16.4. Technically permissible maximum mass of the combination: … kg
 17. 

17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:

1.. … kg
2.. … kg
3.. … kg
17.3. Intended registration/in service maximum permissible laden mass on each axle group:

1.. … kg
2.. … kg
3.. … kg
17.4. Intended registration/in service maximum permissible mass of the combination: … kg
 18. 

18.1. Drawbar trailer: … kg
18.2. Semi-trailer: … kg
18.3. Centre-axle trailer: … kg
18.4. Unbraked trailer: … kg
 19. Technically permissible maximum static mass at the coupling point: … kg
 20. Manufacturer of the engine: …
 21. Engine code as marked on the engine: …
 22. Working principle: …
 23. 

23.1. Hybrid [electric] vehicle: yes/no (1)
 24. Number and arrangement of cylinders: …
 25. Engine capacity: … cm3
 26. 

26.1. Mono fuel/Bi fuel/Flex fuel (1)
 27. Maximum net power (g): … kW at … min-1 or maximum continuous rated power (electric motor) … kW (1)
 28. Gearbox (type): …
 29. Maximum speed: … km/h
 31. Position of retractable axle(s): …
 32. Position of loadable axle(s): …
 33. Drive axle(s) fitted with air suspension or equivalent: yes/no (1)
 35. Tyre/wheel combination (h): …
 36. Trailer brake connections mechanical/electric/pneumatic/hydraulic (1)
 37. Pressure in feed line for trailer braking system: … bar
 38. Code for bodywork (i): …
 41. Number and configuration of doors: …
 42. Number of seating positions (including the driver) (k): …
 44. Approval number or approval mark of coupling device (if fitted): …
 45.1. Characteristics values (1): D: …/ V: …/ S: …/ U: …
 46. 
Stationary: … dB(A) at engine speed: … min-1

Drive-by: … dB(A)
 47. Exhaust emission level (l): Euro …
 48. 
Number of the base regulatory act and latest amending regulatory act applicable: …


1.. test procedure: Type I or ESC (1)

 CO: …
 HC: …
 NOx: …
 HC + NOx: …
 Particulates: …
Smoke opacity (ELR): … (m-1)
2.. test procedure: ETC (if applicable)

 CO: …
 NOx: …
 NMHC: …
 THC: …
 CH4: …
 Particulates: …


48.1. Smoke corrected absorption coefficient: … (m-1)
 50. Type-approved according to the design requirements for transporting dangerous goods: yes/class(es): …/no (l):
 51. For special purpose vehicles: designation in accordance with Annex II Section 5: …
 52. Remarks (n): …
 SIDE 2  1. 

1.1. Number and position of axles with twin wheels: …
 4. 

4.1. Axle spacing:

 1-2: … mm
 2-3: … mm
 3-4: … mm
 5. Length: … mm
 6. Width: … mm
 7. Height: … mm
 10. Distance between the centre of the coupling device and the rear end of the vehicle: … mm
 11. Length of the loading area: … mm
 12. Rear overhang: … mm
 13. 

13.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg
 16. 

16.1. Technically permissible maximum laden mass: … kg
16.2. Technically permissible mass on each axle:

1.. … kg
2.. … kg
3.. … kg etc.
16.3. Technically permissible mass on each axle group:

1.. … kg
2.. … kg
3.. … kg etc.
 19. Technically permissible maximum static mass on the coupling point of a semi-trailer or centre-axle trailer: … kg
 29. Maximum speed: … km/h
 30.1. Track of each steered axle: … mm
 30.2. Track of all other axles: … mm
 31. Position of retractable axle(s): …
 32. Position of loadable axle(s): …
 34. Axle(s) fitted with air suspension or equivalent: yes/no (1)
 35. Tyre/wheel combination (h): …
 36. Trailer brake connections mechanical/electric/pneumatic/hydraulic (1)
 38. Code for bodywork (i): …
 44. Approval number or approval mark of coupling device (if fitted): …
 45.1. Characteristics values (1): D: …/ V: …/ S: …/ U: …
 50. Type-approved according to the design requirements for transporting dangerous goods: yes/class(es): …/no (l):
 51. For special purpose vehicles: designation in accordance with Annex II Section 5: …
 52. Remarks (n): …
 SIDE 2  1. 

1.1. Number and position of axles with twin wheels: …
 2. Steered axles (number, position): …
 4. 

4.1. Axle spacing:

 1-2: … mm
 2-3: … mm
 3-4: … mm
 5. Length: … mm
 6. Width: … mm
 7. Height: … mm
 10. Distance between the centre of the coupling device and the rear end of the vehicle: … mm
 11. Length of the loading area: … mm
 12. Rear overhang: … mm
 13. 

13.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg
 16. 

16.1. Technically permissible maximum laden mass: … kg
16.2. Technically permissible mass on each axle:

1.. … kg
2.. … kg
3.. … kg etc.
16.3. Technically permissible mass on each axle group:

1.. … kg
2.. … kg
3.. … kg etc.
 17. 

17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:

1.. … kg
2.. … kg
3.. … kg
17.3. Intended registration/in service maximum permissible laden mass on each axle group:

1.. … kg
2.. … kg
3.. … kg
 19. Technically permissible maximum static mass on the coupling point of a semi-trailer or centre-axle trailer: … kg
 29. Maximum speed: … km/h
 31. Position of retractable axle(s): …
 32. Position of loadable axle(s): …
 34. Axle(s) fitted with air suspension or equivalent: yes/no (1)
 35. Tyre/wheel combination (h): …
 36. Trailer brake connections mechanical/electric/pneumatic/hydraulic (1)
 38. Code for bodywork (i): …
 44. Approval number or approval mark of coupling device (if fitted): …
 45.1. Characteristics values (1): D: …/ V: …/ S: …/ U: …
 50. Type-approved according to the design requirements for transporting dangerous goods: yes/class(es): …/no (l):
 51. For special purpose vehicles: designation in accordance with Annex II Section 5: …
 52. Remarks (n): …

PART II MODEL C1 — SIDE 1 
The undersigned [… (Full name and position)] hereby certifies that the vehicle:


0.1. Make (Trade name of manufacturer): …
0.2. Type: …
Variant (a): …
Version (a): …
0.2.1. Commercial name: …
0.4. Vehicle category: …
0.5. Name and address of manufacturer: …
0.6. Location and method of attachment of the statutory plates: …
Location of the vehicle identification number: …
0.9. Name and address of the manufacturer’s representative (if any): …
0.10. Vehicle identification number: …

conforms in all respects to the type described in approval (… type-approval number including extension number) issued on (… date of issue) and

cannot be permanently registered without further approvals.


(Place) (Date): … (Signature): …
 MODEL C2 — SIDE 1 
The undersigned [… (Full name and position)] hereby certifies that the vehicle:


0.1. Make (Trade name of manufacturer): …
0.2. Type: …
Variant (a): …
Version (a): …
0.2.1. Commercial name: …
0.4. Vehicle category: …
0.5. Name and address of manufacturer: …
0.6. Location and method of attachment of the statutory plates: …
Location of the vehicle identification number: …
0.9. Name and address of the manufacturer’s representative (if any): …
0.10. Vehicle identification number: …

conforms in all respects to the type described in approval (… type-approval number including extension number) issued on (… date of issue) and

cannot be permanently registered without further approvals.


(Place) (Date): … (Signature): …
 SIDE 2  1. Number of axles: … and wheels: …
 3. Powered axles (number, position, interconnection): … …
 4. 

4.1. Axle spacing:

 1-2: … mm
 2-3: … mm
 3-4: … mm
 5.1. Maximum permissible length: … mm
 6.1. Maximum permissible width: … mm
 7.1. Maximum permissible height: … mm
 12.1. Maximum permissible rear overhang: … mm
 14. 

14.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg
 15. 

15.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg
 16. 

16.1. Technically permissible maximum laden mass: … kg
16.2. Technically permissible mass on each axle:

1.. … kg
2.. … kg
3.. … kg etc.
16.4. Technically permissible maximum mass of the combination: … kg
 18. 

18.1. Drawbar trailer: … kg
18.3. Centre-axle trailer: … kg
18.4. Unbraked trailer: … kg
 19. Technically permissible maximum static vertical mass at the coupling point: … kg
 20. Manufacturer of the engine: …
 21. Engine code as marked on the engine: …
 22. Working principle: …
 23. 

23.1. Hybrid [electric] vehicle: yes/no (1)
 24. Number and arrangement of cylinders: …
 25. Engine capacity: … cm3
 26. 

26.1. Mono fuel/Bi fuel/Flex fuel (1)
 27. Maximum net power (g): … kW at … min-1 or maximum continuous rated power (electric motor) … kW (1)
 29. Maximum speed: … km/h
 30. 

1.. … mm
2.. … mm
3.. … mm
 35. Tyre/wheel combination (h): …
 36. Trailer brake connections mechanical/electric/pneumatic/hydraulic (1)
 41. Number and configuration of doors: …
 42. Number of seating positions (including the driver) (k): …
 46. 
Stationary: … dB(A) at engine speed: … min-1

Drive-by: … dB(A)
 47. Exhaust emission level (l): Euro …
 48. 
Number of the base regulatory act and latest amending regulatory act applicable: …


1.1. test procedure: Type I or ESC (1)

 CO: …
 HC: …
 NOx: …
 HC + NOx: …
 Particulates: …
Smoke opacity (ELR): … (m-1)
1.2. test procedure: Type I (Euro 5 or 6 (1))

 CO: …
 THC: …
 NMHC: …
 NOx: …
 THC + NOx: …
 Particulates (mass): …
 Particles (number): …
2. test procedure: ETC (if applicable)

 CO: …
 NOx: …
 NMHC: …
 THC: …
 CH4: …
 Particulates: …


48.1. Smoke corrected absorption coefficient: … (m-1)
 49. 

1.. all power train except pure electric vehicles

 CO2 emissions Fuel consumption
Urban conditions: … g/km … l/100 km/m3/100 km (1)
Extra-urban conditions: … g/km … l/100 km/m3/100 km (1)
Combined: … g/km … l/100 km/m3/100 km (1)
Weighted, combined … g/km … l/100 km
2.. pure electric vehicles and OVC hybrid electric vehicles
Electric energy consumption (weighted, combined (1))… Wh/kmElectric range… km
 52. Remarks (n): …
 SIDE 2  1. 

1.1. Number and position of axles with twin wheels: …
 2. Steered axles (number, position): …
 3. Powered axles (number, position, interconnection): … …
 4. 

4.1. Axle spacing:

 1-2: … mm
 2-3: … mm
 3-4: … mm
 5.1. Maximum permissible length: … mm
 6.1. Maximum permissible width: … mm
 7.1. Maximum permissible height: … mm
 12.1. Maximum permissible rear overhang: … mm
 14. 

14.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg etc.
 15. 

15.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg
 16. 

16.1. Technically permissible maximum laden mass: … kg
16.2. Technically permissible mass on each axle:

1.. … kg
2.. … kg
3.. … kg etc.
16.3. Technically permissible mass on each axle group:

1.. … kg
2.. … kg
3.. … kg etc.
16.4. Technically permissible maximum mass of the combination: … kg
 17. 

17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:

1.. … kg
2.. … kg
3.. … kg
17.3. Intended registration/in service maximum permissible laden mass on each axle group:

1.. … kg
2.. … kg
3.. … kg
17.4. Intended registration/in service maximum permissible mass of the combination: … kg
 18. 

18.1. Drawbar trailer: … kg
18.3. Centre-axle trailer: … kg
18.4. Unbraked trailer: … kg
 19. Technically permissible maximum static mass at the coupling point: … kg
 20. Manufacturer of the engine: …
 21. Engine code as marked on the engine: …
 22. Working principle: …
 23. 

23.1. Hybrid [electric] vehicle: yes/no (1)
 24. Number and arrangement of cylinders: …
 25. Engine capacity: … cm3
 26. 

26.1. Mono fuel/Bi fuel/Flex fuel (1)
 27. Maximum net power (g): … kW at … min-1 or maximum continuous rated power (electric motor) … kW (1)
 28. Gearbox (type): …
 29. Maximum speed: … km/h
 30. 

1.. … mm
2.. … mm
3.. … mm
 33. Drive axle(s) fitted with air suspension or equivalent: yes/no (1)
 35. Tyre/wheel combination (h): …
 36. Trailer brake connections mechanical/electric/pneumatic/hydraulic (1)
 37. Pressure in feed line for trailer braking system: … bar
 44. Approval number or approval mark of coupling device (if fitted): …
 45. Type or classes of coupling devices which can be fitted: …
 45.1. Characteristics values (1): D: …/ V: …/ S: …/ U: …
 46. 
Stationary: … dB(A) at engine speed: … min-1

Drive-by: … dB(A)
 47. Exhaust emission level (l): Euro …
 48. 
Number of the base regulatory act and latest amending regulatory act applicable: …


1.1. test procedure: Type I or ESC (1)

 CO: …
 HC: …
 NOx: …
 HC + NOx: …
 Particulates: …
Smoke opacity (ELR): … (m-1)
1.2. test procedure: Type I (Euro 5 or 6 (1))

 CO: …
 THC: …
 NMHC: …
 NOx: …
 THC + NOx: …
 Particulates (mass): …
 Particles (number): …
2. test procedure: ETC (if applicable)

 CO: …
 NOx: …
 NMHC: …
 THC: …
 CH4: …
 Particulates: …


48.1. Smoke corrected absorption coefficient: … (m-1)
 52. Remarks (n): …
 SIDE 2  1. 

1.1. Number and position of axles with twin wheels: …
 2. Steered axles (number, position): …
 3. Powered axles (number, position, interconnection): … …
 4. 

4.1. Axle spacing:

 1-2: … mm
 2-3: … mm
 3-4: … mm
 5.1. Maximum permissible length: … mm
 6.1. Maximum permissible width: … mm
 7.1. Maximum permissible height: … mm
 12.1. Maximum permissible rear overhang: … mm
 14. 

14.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg etc.
 15. 

15.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg
 16. 

16.1. Technically permissible maximum laden mass: … kg
16.2. Technically permissible mass on each axle:

1.. … kg
2.. … kg
3.. … kg etc.
16.3. Technically permissible mass on each axle group:

1.. … kg
2.. … kg
3.. … kg etc.
16.4. Technically permissible maximum mass of the combination: … kg
 17. 

17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:

1.. … kg
2.. … kg
3.. … kg
17.3. Intended registration/in service maximum permissible laden mass on each axle group:

1.. … kg
2.. … kg
3.. … kg
17.4. Intended registration/in service maximum permissible mass of the combination: … kg
 18. 

18.1. Drawbar trailer: … kg
18.3. Centre-axle trailer: … kg
18.4. Unbraked trailer: … kg
 19. Technically permissible maximum static mass at the coupling point: … kg
 20. Manufacturer of the engine: …
 21. Engine code as marked on the engine: …
 22. Working principle: …
 23. 

23.1. Hybrid [electric] vehicle: yes/no (1)
 24. Number and arrangement of cylinders: …
 25. Engine capacity: … cm3
 26. 

26.1. Mono fuel/Bi fuel/Flex fuel (1)
 27. Maximum net power (g): … kW at … min-1 or maximum continuous rated power (electric motor) … kW (1)
 28. Gearbox (type): …
 29. Maximum speed: … km/h
 30.1. Track of each steered axle: … mm
 30.2. Track of all other axles: … mm
 32. Position of loadable axle(s): …
 33. Drive axle(s) fitted with air suspension or equivalent: yes/no (1)
 35. Tyre/wheel combination (h): …
 36. Trailer brake connections mechanical/electric/pneumatic/hydraulic (1)
 37. Pressure in feed line for trailer braking system: … bar
 44. Approval number or approval mark of coupling device (if fitted): …
 45. 

45.1. Characteristics values (1): D: …/ V: …/ S: …/ U: …
 46. 
Stationary: … dB(A) at engine speed: … min-1

Drive-by: … dB(A)
 47. Exhaust emission level (l): Euro …
 48. 
Number of the base regulatory act and latest amending regulatory act applicable: …


1.. test procedure: Type I or ESC (1)

 CO: …
 HC: …
 NOx: …
 HC + NOx: …
 Particulates: …
Smoke opacity (ELR): … (m-1)
2.. test procedure: ETC (if applicable)

 CO: …
 NOx: …
 NMHC: …
 THC: …
 CH4: …
 Particulates: …


48.1. Smoke corrected absorption coefficient: … (m-1)
 52. Remarks (n): …
 SIDE 2  1. 

1.1. Number and position of axles with twin wheels: …
 3. Powered axles (number, position, interconnection): … …
 4. 

4.1. Axle spacing:

 1-2: … mm
 2-3: … mm
 3-4: … mm
 5.1. Maximum permissible length: … mm
 6.1. Maximum permissible width: … mm
 7.1. Maximum permissible height: … mm
 8. Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): … mm
 12.1. Maximum permissible rear overhang: … mm
 14. 

14.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg etc.
 15. 

15.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg
 16. 

16.1. Technically permissible maximum laden mass: … kg
16.2. Technically permissible mass on each axle:

1.. … kg
2.. … kg
3.. … kg etc.
16.4. Technically permissible maximum mass of the combination: … kg
 18. 

18.1. Drawbar trailer: … kg
18.2. Semi-trailer: … kg
18.3. Centre-axle trailer: … kg
18.4. Unbraked trailer: … kg
 19. Technically permissible maximum static mass at the coupling point: … kg
 20. Manufacturer of the engine: …
 21. Engine code as marked on the engine: …
 22. Working principle: …
 23. 

23.1. Hybrid [electric] vehicle: yes/no (1)
 24. Number and arrangement of cylinders: …
 25. Engine capacity: … cm3
 26. 

26.1. Mono fuel/Bi fuel/Flex fuel (1)
 27. Maximum net power (g): … kW at … min-1 or maximum continuous rated power (electric motor) … kW (1)
 28. Gearbox (type): …
 29. Maximum speed: … km/h
 30. 

1.. … mm
2.. … mm
3.. … mm
 35. Tyre/wheel combination (h): …
 36. Trailer brake connections mechanical/electric/pneumatic/hydraulic (1)
 37. Pressure in feed line for trailer braking system: … bar
 44. Approval number or approval mark of coupling device (if fitted): …
 45. 

45.1. Characteristics values (1): D: …/ V: …/ S: …/ U: …
 46. 
Stationary: … dB(A) at engine speed: … min-1

Drive-by: … dB(A)
 47. Exhaust emission level (l): Euro …
 48. 
Number of the base regulatory act and latest amending regulatory act applicable: …


1.1. test procedure: Type I or ESC (1)

 CO: …
 HC: …
 NOx: …
 HC + NOx: …
 Particulates: …
Smoke opacity (ELR): … (m-1)
1.2. test procedure: Type I (Euro 5 or 6 (1))

 CO: …
 THC: …
 NMHC: …
 NOx: …
 THC + NOx: …
 Particulates (mass): …
 Particles (number): …
2. test procedure: ETC (if applicable)

 CO: …
 NOx: …
 NMHC: …
 THC: …
 CH4: …
 Particulates: …


48.1. Smoke corrected absorption coefficient: … (m-1)
 49. 

1.. all power train except pure electric vehicles

 CO2 emissions Fuel consumption
Urban conditions: … g/km … l/100 km/m3/100 km (1)
Extra-urban conditions: … g/km … l/100 km/m3/100 km (1)
Combined: … g/km … l/100 km/m3/100 km (1)
Weighted, combined … g/km … l/100 km
2.. pure electric vehicles and OVC hybrid electric vehicles
Electric energy consumption (weighted, combined (1))… Wh/kmElectric range… km
 52. Remarks (n): …
 SIDE 2  1. 

1.1. Number and position of axles with twin wheels: …
 2. Steered axles (number, position): …
 3. Powered axles (number, position, interconnection): … …
 4. 

4.1. Axle spacing:

 1-2: … mm
 2-3: … mm
 3-4: … mm
 5.1. Maximum permissible length: … mm
 6.1. Maximum permissible width: … mm
 8. Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): … mm
 12.1. Maximum permissible rear overhang: … mm
 14. 

14.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg etc.
 15. 

15.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg
 16. 

16.1. Technically permissible maximum laden mass: … kg
16.2. Technically permissible mass on each axle:

1.. … kg
2.. … kg
3.. … kg etc.
16.3. Technically permissible mass on each axle group:

1.. … kg
2.. … kg
3.. … kg etc.
16.4. Technically permissible maximum mass of the combination: … kg
 17. 

17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:

1.. … kg
2.. … kg
3.. … kg
17.3. Intended registration/in service maximum permissible laden mass on each axle group:

1.. … kg
2.. … kg
3.. … kg
17.4. Intended registration/in service maximum permissible mass of the combination: … kg
 18. 

18.1. Drawbar trailer: … kg
18.2. Semi-trailer: … kg
18.3. Centre-axle trailer: … kg
18.4. Unbraked trailer: … kg
 19. Technically permissible maximum static mass at the coupling point: … kg
 20. Manufacturer of the engine: …
 21. Engine code as marked on the engine: …
 22. Working principle: …
 23. 

23.1. Hybrid [electric] vehicle: yes/no (1)
 24. Number and arrangement of cylinders: …
 25. Engine capacity: … cm3
 26. 

26.1. Mono fuel/Bi fuel/Flex fuel (1)
 27. Maximum net power (g): … kW at … min-1 or maximum continuous rated power (electric motor) … kW (1)
 28. Gearbox (type): …
 29. Maximum speed: … km/h
 31. Position of retractable axle(s): …
 32. Position of loadable axle(s): …
 33. Drive axle(s) fitted with air suspension or equivalent: yes/no (1)
 35. Tyre/wheel combination (h): …
 36. Trailer brake connections mechanical/electric/pneumatic/hydraulic (1)
 37. Pressure in feed line for trailer braking system: … bar
 44. Approval number or approval mark of coupling device (if fitted): …
 45. 

45.1. Characteristics values (1): D: …/ V: …/ S: …/ U: …
 46. 
Stationary: … dB(A) at engine speed: … min-1

Drive-by: … dB(A)
 47. Exhaust emission level (l): Euro …
 48. 
Number of the base regulatory act and latest amending regulatory act applicable: …


1.1. test procedure: Type I or ESC (1)

 CO: …
 HC: …
 NOx: …
 HC + NOx: …
 Particulates: …
Smoke opacity (ELR): … (m-1)
1.2. test procedure: Type I (Euro 5 or 6 (1))

 CO: …
 THC: …
 NMHC: …
 NOx: …
 THC + NOx: …
 Particulates (mass): …
 Particles (number): …
2. test procedure: ETC (if applicable)

 CO: …
 NOx: …
 NMHC: …
 THC: …
 CH4: …
 Particulates: …


48.1. Smoke corrected absorption coefficient: … (m-1)
 52. Remarks (n): …
 SIDE 2  1. 

1.1. Number and position of axles with twin wheels: …
 2. Steered axles (number, position): …
 3. Powered axles (number, position, interconnection): … …
 4. 

4.1. Axle spacing:

 1-2: … mm
 2-3: … mm
 3-4: … mm
 5.1. Maximum permissible length: … mm
 6.1. Maximum permissible width: … mm
 8. Fifth wheel lead for semi-trailer towing vehicle (maximum and minimum): … mm
 12.1. Maximum permissible rear overhang: … mm
 14. 

14.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg etc.
 15. 

15.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg
 16. 

16.1. Technically permissible maximum laden mass: … kg
16.2. Technically permissible mass on each axle:

1.. … kg
2.. … kg
3.. … kg etc.
16.3. Technically permissible mass on each axle group:

1.. … kg
2.. … kg
3.. … kg etc.
16.4. Technically permissible maximum mass of the combination: … kg
 17. 

17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:

1.. … kg
2.. … kg
3.. … kg
17.3. Intended registration/in service maximum permissible laden mass on each axle group:

1.. … kg
2.. … kg
3.. … kg
17.4. Intended registration/in service maximum permissible mass of the combination: … kg
 18. 

18.1. Drawbar trailer: … kg
18.2. Semi-trailer: … kg
18.3. Centre-axle trailer: … kg
18.4. Unbraked trailer: … kg
 19. Technically permissible maximum static mass at the coupling point: … kg
 20. Manufacturer of the engine: …
 21. Engine code as marked on the engine: …
 22. Working principle: …
 23. 

23.1. Hybrid [electric] vehicle: yes/no (1)
 24. Number and arrangement of cylinders: …
 25. Engine capacity: … cm3
 26. 

26.1. Mono fuel/Bi fuel/Flex fuel (1)
 27. Maximum net power (g): … kW at … min-1 or maximum continuous rated power (electric motor) … kW (1)
 28. Gearbox (type): …
 29. Maximum speed: … km/h
 31. Position of retractable axle(s): …
 32. Position of loadable axle(s): …
 33. Drive axle(s) fitted with air suspension or equivalent: yes/no (1)
 35. Tyre/wheel combination (h): …
 36. Trailer brake connections mechanical/electric/pneumatic/hydraulic (1)
 37. Pressure in feed line for trailer braking system: … bar
 44. Approval number or approval mark of coupling device (if fitted): …
 45. 

45.1. Characteristics values (1): D: …/ V: …/ S: …/ U: …
 46. 
Stationary: … dB(A) at engine speed: … min-1

Drive-by: … dB(A)
 47. Exhaust emission level (l): Euro …
 48. 
Number of the base regulatory act and latest amending regulatory act applicable: …


1.. test procedure: Type I or ESC (1)

 CO: …
 HC: …
 NOx: …
 HC + NOx: …
 Particulates: …
Smoke opacity (ELR): … (m-1)
2.. test procedure: ETC (if applicable)

 CO: …
 NOx: …
 NMHC: …
 THC: …
 CH4: …
 Particulates: …


48.1. Smoke corrected absorption coefficient: … (m-1)
 52. Remarks (n): …
 SIDE 2  1. 

1.1. Number and position of axles with twin wheels: …
 4. 

4.1. Axle spacing:

 1-2: … mm
 2-3: … mm
 3-4: … mm
 5.1. Maximum permissible length: … mm
 6.1. Maximum permissible width: … mm
 7.1. Maximum permissible height: … mm
 10. Distance between the centre of the coupling device and the rear end of the vehicle: … mm
 12.1. Maximum permissible rear overhang: … mm
 14. 

14.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg etc.
 15. 

15.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg
 16. 

16.1. Technically permissible maximum laden mass: … kg
16.2. Technically permissible mass on each axle:

1.. … kg
2.. … kg
3.. … kg etc.
16.3. Technically permissible mass on each axle group:

1.. … kg
2.. … kg
3.. … kg etc.
 19.1. Technically permissible maximum static mass on the coupling point of a semi-trailer or centre-axle trailer: … kg
 29. Maximum speed: … km/h
 30.1. Track of each steered axle: … mm
 30.2. Track of all other axles: … mm
 31. Position of retractable axle(s): …
 32. Position of loadable axle(s): …
 34. Axle(s) fitted with air suspension or equivalent: yes/no (1)
 35. Tyre/wheel combination (h): …
 44. Approval number or approval mark of coupling device (if fitted): …
 45. 

45.1. Characteristics values (1): D: …/ V: …/ S: …/ U: …
 52. Remarks (n): …
 SIDE 2  1. 

1.1. Number and position of axles with twin wheels: …
 2. Steered axle (number, position): …
 4. 

4.1. Axle spacing:

 1-2: … mm
 2-3: … mm
 3-4: … mm
 5.1. Maximum permissible length: … mm
 6.1. Maximum permissible width: … mm
 7.1. Maximum permissible height: … mm
 10. Distance between the centre of the coupling device and the rear end of the vehicle: … mm
 12.1. Maximum permissible rear overhang: … mm
 14. 

14.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg etc.
 15. 

15.1. Distribution of this mass amongst the axles:

1.. … kg
2.. … kg
3.. … kg
 16. 

16.1. Technically permissible maximum laden mass: … kg
16.2. Technically permissible mass on each axle:

1.. … kg
2.. … kg
3.. … kg etc.
16.3. Technically permissible mass on each axle group:

1.. … kg
2.. … kg
3.. … kg etc.
 17. 

17.1. Intended registration/in service maximum permissible laden mass: … kg
17.2. Intended registration/in service maximum permissible laden mass on each axle:

1.. … kg
2.. … kg
3.. … kg
17.3. Intended registration/in service maximum permissible laden mass on each axle group:

1.. … kg
2.. … kg
3.. … kg
 19.1. Technically permissible maximum static mass on the coupling point of a semi-trailer or centre-axle trailer: … kg
 29. Maximum speed: … km/h
 31. Position of retractable axle(s): …
 32. Position of loadable axle(s): …
 34. Axle(s) fitted with air suspension or equivalent: yes/no (1)
 35. Tyre/wheel combination (h): …
 44. Approval number or approval mark of coupling device (if fitted): …
 45. 

45.1. Characteristics values (1): D: …/ V: …/ S: …/ U: …
 52. Remarks (n): …
(1)Delete where not applicable(a)Indicate the identification code. This code shall contain not more than 25 characters for a variant and not more than 35 characters for a version.(b)Indicate whether the vehicle is suitable for use in either right or left-hand traffic or both right and left-hand traffic.(c)Indicate whether the speedometer fitted has metric or both metric and imperial units.(d)This statement shall not restrict the right of the Member States to require technical adaptations in order to allow the registration of a vehicle in a Member State other than the one for which it was intended when the direction of the traffic is on the opposite side of the road.(e)This entry shall be only completed when the vehicle has two axles.(f)This mass shall include the mass of the driver and the mass of the crew member if there is a crew seat in the vehicle.
With respect to vehicles belonging to category M1, N1, O1, O2 or M2 under 3,5 tonnes, the actual mass may vary by 5 % with respect to the mass stated in this entry.
The variation shall be 3 % for all other vehicle categories.(g)For hybrid electric vehicles, indicate both power outputs.(h)Optional equipment under this letter can be added under entry “Remarks”.(i)The codes described in Annex II Letter C shall be used.(j)Indicate only the basic colour(s) as follows: white, yellow, orange, red, violet, blue, green, grey, brown or black.(k)Excluding seats designated for use only when the vehicle is stationary and the number of wheelchair positions.
For coaches belonging to the vehicle category M3 the number of crew members shall be included in the passenger number.(l)Add the number of the Euro level and the character corresponding to the provisions used for type-approval.(m)Repeat for the various fuels which can be used. Vehicles, which can be fuelled with both petrol and gaseous fuel but where the petrol system is fitted for emergency purposes or starting only and of which the petrol tank cannot contain more than 15 litres of petrol, will be regarded as vehicles which can only run a gaseous fuel.(n)If the vehicle is equipped with 24 GHz short-range radar equipment in accordance with Commission Decision 2005/50/EC (OJ L 21, 25.1.2005, p. 15), the manufacturer shall indicate here: “Vehicle equipped with 24 GHz short-range radar equipment”.(o)The manufacturer may complete these entries either for international traffic or national traffic or both.
For national traffic, the code of the country where the vehicle is intended to be registered shall be mentioned. The code shall be in accordance with standard ISO 3166-1:2006.
For international traffic, the directive number shall be referred to (e.g. “96/53/EC” for Council Directive 96/53/EC).
