
Article 1 
Annexes II, III, IV and V to Directive 2000/29/EC are amended in accordance with the Annex to this Directive.
Article 2 

1. Member States shall adopt and publish by 28 February 2005 at the latest, the laws, regulations and administrative provisions necessary to comply with this Directive. They shall forthwith communicate to the Commission the text of those provisions and a correlation table between those provisions and this Directive.They shall apply those provisions from 1 March 2005.When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.
2. Member States shall communicate to the Commission the text of the main provisions of national law, which they adopt in the field governed by this Directive.
Article 3 
This Directive shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
Article 4 
This Directive is addressed to the Member States.
Done at Brussels, 5 October 2004.
For the Commission
David BYRNE
Member of the Commission
ANNEX
1. 
'
 4. Ceratocystis virescens (Davidson) Moreau
 Plants of Acer saccharum Marsh., other than fruit and seeds, originating in the USA and Canada, wood of Acer saccharum Marsh., including wood which has not kept its natural round surface, originating in the USA and Canada'.

2. 
'Plants of Castanea Mill and Quercus L., intended for planting, other than seeds'.

3. 
'
 01 Cryphonectria parasitica (Murrill.) Barr.
 Wood, excluding wood which is bark-free, and isolated bark of Castanea Mill. CZ, DK, EL, (Crete, Lesvos) IRL, S, UK (except the Isle of Man)'.

4. In Annex III, Part A, point 4 is deleted.

5. 
'
 1.1. 

— chips, particles, sawdust, shavings, wood waste and scrap obtained in whole or part from these conifers,
— wood packaging material, in the form of packing cases, boxes, crates, drums and similar packings, pallets, box pallets and other load boards, pallet collars, actually in use in the transport of objects of all kinds,
— wood used to wedge or support non-wood cargo,
— wood ofLibocedrus decurrens Torr. where there is evidence that the wood has been processed or manufactured for pencils using heat treatment to achieve a minimum temperature of 82 °C for a seven to eight-day period,

but including that which has not kept its natural round surface, originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan and the USA, where Bursaphelenchus xylophilus (Steiner et Bührer) Nickle et al. is known to occur.
 Official statement that the wood has undergone an appropriate:
((a)) heat treatment to achieve a minimum core temperature of 56 °C for at least 30 minutes. There shall be evidence thereof by a mark “HT” put on the wood or on any wrapping in accordance with current usage, and on the certificates referred to in Article 13.1.(ii),
or
((b)) fumigation to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum wood temperature, the rate (g/m3) and the exposure time (h),
or
((c)) chemical pressure impregnation with a product approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the pressure (psi or kPa) and the concentration (%).
 1.2. 

— chips, particles, sawdust, shavings, wood waste and scrap obtained in whole or part from these conifers,

originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan and the USA, where Bursaphelenchus xylophilus (Steiner et Bührer) Nickle et al. is known to occur.
 Official statement that the wood has undergone an appropriate:
((a)) heat treatment to achieve a minimum core temperature of 56 °C for at least 30 minutes, the latter to be indicated on the certificates referred to in Article 13.1.(ii),
or
((b)) fumigation to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum wood temperature, the rate (g/m3) and the exposure time (h).
 1.3. 

— chips, particles, sawdust, shavings, wood waste and scrap,
— wood packaging material, in the form of packing cases, boxes, crates, drums and similar packings, pallets, box pallets and other load boards, pallet collars, actually in use in the transport of objects of all kinds,
— wood used to wedge or support non-wood cargo,

originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan and the USA, where Bursaphelenchus xylophilus (Steiner et Bührer) Nickle et al. is known to occur.
 Official statement that the wood:
((a)) is bark-free,
or
((b)) has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule. There shall be evidence thereof by a mark “kiln-dried” or “K.D.” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage,
or
((c)) has undergone an appropriate heat treatment to achieve a minimum core temperature of 56 °C for at least 30 minutes. There shall be evidence thereof by a mark “HT” put on the wood or on any wrapping in accordance with current usage and on the certificates referred to in Article 13.1.(ii),
or
((d)) has undergone an appropriate fumigation to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum wood temperature, the rate (g/m3) and the exposure time (h),
or
((e)) has undergone an appropriate chemical pressure impregnation with a product approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the pressure (psi or kPa) and the concentration (%).
 1.4. 

— chips, particles, sawdust, shavings, wood waste and scrap,

originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan and the USA, where Bursaphelenchus xylophilus (Steiner et Bührer) Nickle et al. is known to occur.
 Official statement that the wood:
((a)) has been produced from debarked round wood,
or
((b)) has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule,
or
((c)) has undergone an appropriate fumigation to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum wood temperature, the rate (g/m3) and the exposure time (h),
or
((d)) has undergone an appropriate heat treatment to achieve a minimum core temperature of 56 °C for at least 30 minutes, the latter to be indicated on the certificates referred to in Article 13.1.(ii).
 1.5. 

— chips, particles, sawdust, shavings, wood waste and scrap obtained in whole or part from these conifers,
— wood packaging material in the form of packing cases, boxes, crates, drums and similar packings, pallets, box pallets and other load boards, pallet collars, actually in use in the transport of objects of all kinds,
— wood used to wedge or support non-wood cargo,

but including that which has not kept its natural round surface, originating in Russia, Kazakhstan and Turkey.
 Official statement that the wood:
((a)) originates in areas known to be free from:

— Monochamus spp. (non-European)
— Pissodes spp. (non-European)
— Scolytidae spp. (non-European)
The area shall be mentioned on the certificates referred to in Article 13.1.(ii), under the rubric “place of origin,”
or
((b)) is bark-free and free from grub holes, caused by the genus Monochamus spp. (non-European), defined for this purpose as those which are larger than 3 mm across,
or
((c)) has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule. There shall be evidence thereof by a mark “kiln-dried” or “K.D”. or another internationally recognised mark, put on the wood or on any wrapping in accordance with the current usage,
or
((d)) has undergone an appropriate heat treatment to achieve a minimum core temperature of 56 °C for at least 30 minutes. There shall be evidence thereof by a mark “HT” put on the wood or on any wrapping in accordance with current usage, and on the certificates referred to in Article 13.1.(ii),
or
((e)) has undergone an appropriate fumigation to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum wood temperature, the rate (g/m3) and the exposure time (h),
or
((f)) has undergone an appropriate chemical pressure impregnation with a product approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the pressure (psi or kPa) and the concentration (%).
 1.6. 

— chips, particles, sawdust, shavings, wood waste and scrap obtained in whole or part from these conifers,
— wood packaging material, in the form of packing cases, boxes, crates, drums and similar packings, pallets, box pallets and other load boards, pallet collars, actually in use in the transport of objects of all kinds,
— wood used to wedge or support non-wood cargo,

but including that which has not kept its natural round surface, originating in third countries, other than:


— Russia, Kazakhstan and Turkey,
— European countries,
— Canada, China, Japan, the Republic of Korea, Mexico, Taiwan and the USA, where Bursaphelenchus xylophilus (Steiner et Bührer) Nickle et al. is known to occur.
 Official statement that the wood:
((a)) is bark-free and free from grub holes, caused by the genus Monochamus spp. (non-European), defined for this purpose as those which are larger than 3 mm across,
or
((b)) has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule. There shall be evidence thereof by a mark “kiln-dried” or “K.D” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage,
or
((c)) has undergone an appropriate fumigation to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum wood temperature, the rate (g/m3) and the exposure time (h),
or
((d)) has undergone an appropriate chemical pressure impregnation with a product approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the pressure (psi or kPa) and the concentration (%),
or
((e)) has undergone an appropriate heat treatment to achieve a minimum core temperature of 56 °C for at least 30 minutes. There shall be evidence thereof by a mark “HT” put on the wood or on any wrapping in accordance with current usage, and on the certificates referred to in Article 13.1.(ii).
 1.7. 

— Russia, Kazakhstan and Turkey,
— non-European countries other than Canada, China, Japan, the Republic of Korea, Mexico, Taiwan and the USA, where Bursaphelenchus xylophilus (Steiner et Bührer) Nickle et al. is known to occur.
 Official statement that the wood:
((a)) originates in areas known to be free from:

— Monochamus spp. (non-European)
— Pissodes spp. (non-European)
— Scolytidae spp. (non-European)
The area shall be mentioned on the certificates referred to in Article 13.1.(ii), under the rubric “place of origin,”
or
((b)) has been produced from debarked round wood,
or
((c)) has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule,
or
((d)) has undergone an appropriate fumigation to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence of the fumigation by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum wood temperature, the rate (g/m3) and the exposure time (h),
or
((e)) has undergone an appropriate heat treatment to achieve a minimum core temperature of 56 °C for at least 30 minutes, the latter to be indicated on the certificates referred to in Article 13.1.(ii).'

6. 
'
 2. Wood packaging material, in the form of packing cases, boxes, crates, drums and similar packings, pallets, box pallets and other load boards, pallet collars, actually in use in the transport of objects of all kinds, except raw wood of 6 mm thickness or less, and processed wood produced by glue, heat and pressure, or a combination thereof, coming from third countries, except Switzerland.
 The wood packaging material shall:
— be made from debarked round wood, and
— be subject to one of the approved measures as specified in Annex I to FAO International Standard for Phytosanitary Measures No 15 on Guidelines for regulating wood packaging material in international trade, and
— display a mark with:
((a)) the two-letter ISO country code, a code identifying the producer and the code identifying the approved measure applied to the wood packaging material in the mark as specified in Annex II to FAO International Standard for Phytosanitary Measures No 15 on Guidelines for regulating wood packaging material in international trade. The letters “DB” shall be added to the abbreviation of the approved measure included in the said mark.
and
((b)) in the case of wood packaging material manufactured, repaired or recycled as of 1 March 2005, also the logo as specified in Annex II to the said FAO Standard. However the requirement is not applicable on a temporary basis until 31 December 2007 in the case of wood packaging material manufactured, repaired or recycled before 28 February 2005.'

7. 
'
 2.1. 

— wood intended for the production of veneer sheets,
— chips, particles, sawdust, shavings, wood waste and scrap,
originating in the USA and Canada.
 Official statement that the wood has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule. There shall be evidence thereof by a mark “Kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage.'

8. 
'
 2.2. Wood of Acer saccharum Marsh., intended for the production of veneer sheets, originating in the USA and Canada.
 Official statement that the wood originates in areas known to be free from Ceratocystis virescens (Davidson) Moreau and is intended for the production of veneer sheets.'

9. 
'
 3. 

— chips, particles, sawdust, shavings, wood waste and scrap,
— casks, barrels, vats, tubs and other coopers’ products and parts thereof, of wood, including staves where there is documented evidence that the wood has been produced or manufactured using heat treatment to achieve a minimum temperature of 176 °C for 20 minutes
but including wood which has not kept its natural round surface, originating in the USA.
 Official statement that the wood:
((a)) is squared so as to remove entirely the rounded surface,
or
((b)) is bark-free and the water content is less than 20 % expressed as a percentage of the dry matter,
or
((c)) is bark-free and has been disinfected by an appropriate hot-air or hot water treatment,
or
((d)) if sawn, with or without residual bark attached, has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule. There shall be evidence thereof by a mark “Kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage.'

10. In Annex IV, Part A, Section I, point 4, is deleted.

11. 
'
Wood of Platanus L., except that in the form of chips, particles, sawdust, shavings, wood waste and scrap, but including wood which has not kept its natural round surface, originating in the USA or Armenia. Official statement that the wood has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule. There shall be evidence thereof by a mark “kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage.'

12. 
'
Wood of Populus L., except that in the form of chips, particles, sawdust, shavings, wood waste and scrap, but including wood which has not kept its natural round surface, originating in countries of the American continent. Official statement that the wood:
— is bark-free
or
— has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule. There shall be evidence thereof by a mark “kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage.'

13. 
'
 7.1. 

— Acer saccharum Marsh., originating in the USA and Canada,
— Platanus L., originating in the USA or Armenia,
— Populus L., originating in the American continent.
 Official statement that the wood:
((a)) has been produced from debarked round wood,
or
((b)) has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter achieved through an appropriate time/temperature schedule,
or
((c)) has undergone an appropriate fumigation to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence of the fumigation by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum wood temperature, the rate (g/m3) and the exposure time (h),
or
((d)) has undergone an appropriate heat treatment to achieve a minimum core temperature of 56 °C for at least 30 minutes, the latter to be indicated on the certificates referred to in Article 13.1.(ii).
 7.2. Whether or not listed among the CN codes in Annex V, Part B, wood in the form of chips, particles, sawdust, shavings, wood waste and scrap and obtained in whole or part from Quercus L. originating in the USA.
 Official statement that the wood:
((a)) has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter achieved through an appropriate time/temperature schedule,
or
((b)) has undergone an appropriate fumigation to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence of the fumigation by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum wood temperature, the rate (g/m3) and the exposure time (h),
or
((c)) has undergone an appropriate heat treatment to achieve a minimum core temperature of 56 °C for at least 30 minutes, the latter to be indicated on the certificates referred to in 13.1.(ii).'

14. 
'
 7.3. Isolated bark of conifers (Coniferales), originating in non-European countries
 Official statement that the isolated bark:
((a)) has been subjected to an appropriate fumigation with a fumigant approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum bark temperature, the rate (g/m3) and the exposure time (h),
or
((b)) has undergone an appropriate heat treatment to achieve the minimum temperature of 56 °C for at least 30 minutes, the latter to be indicated on the certificates referred to in Article 13.1.(ii).'

15. 
'
 8. Wood used to wedge or support non-wood cargo, including that which has not kept its natural round surface, except raw wood of 6 mm thickness or less and processed wood produced by glue, heat and pressure, or a combination thereof, coming from third countries, except Switzerland.
 The wood shall:
((a)) be made from debarked round wood and:

— be subject to one of the approved measures as specified in Annex I to FAO International Standard for Phytosanitary Measures No 15 on Guidelines for regulating wood packaging material in international trade, and
— display a mark with at least the two-letter ISO country code, a code identifying the producer and the code identifying the approved measure applied to the wood packaging material in the mark as specified in Annex II to FAO International Standard for Phytosanitary Measures No 15 on Guidelines for regulating wood packaging material in international trade. The letters “DB” shall be added to the abbreviation of the approved measure included in the said mark.
or on a temporary basis until 31 December 2007
((b)) be made from bark-free wood that is free from pests and signs of live pests.'

16. 
'
 11.01. Plants of Quercus L., other than fruit and seeds, originating in the USA
 Without prejudice to the provisions applicable to the plants listed in Annex III(A)(2), official statement that the plants originate in areas known to be free from Ceratocystis fagacearum (Bretz) Hunt.
 11.1. Plants of Castanea Mill. and Quercus L., other than fruit and seeds, originating in non-European countries
 Without prejudice to the prohibitions applicable to the plants listed in Annex III(A)(2) and IV(A)(I)(11.01.), official statement that no symptoms of Cronartium spp. (non-European) have been observed at the place of production or its immediate vicinity since the beginning of the last complete cycle of vegetation.'

17. 
' 12. Plants of Platanus L., intended for planting, other than seeds, originating in the USA or Armenia.
'

18. In Annex IV, Part A, Section II, points 1 and 3 are deleted.

19. 
'
 6.3. Wood of Castanea Mill.
 
((a)) The wood shall be bark-free
or
((b)) Official statement that the wood:

((i)) originates in areas known to be free from Cryphonectria parasitica (Murrill.) Barr.
or
((ii)) has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule. There shall be evidence thereof by a mark “Kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage. CZ, DK, EL, (Crete, Lesvos) IRL, S, UK (except the Isle of Man)'.

20. In Annex IV, Part B, point 14.1, the words ‘without prejudice to the prohibitions applicable to the bark listed in Annex III(a)(4)’ in the middle column are deleted.

21. In Annex IV, Part B, points 14.2, 14.3, 14.4, 14.5 and 14.6 the words ‘Annex III(A)(4),’ in the middle column are deleted.

22. 
'
 14.9. Isolated bark of Castanea Mill.
 Official statement that the isolated bark:
((a)) originates in areas known to be free from Cryphonectria parasitica (Murrill.) Barr.
or
((b)) has been subjected to fumigation or other appropriate treatment against Cryphonectria parasitica (Murrill.) Barr. to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence of the fumigation by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum bark temperature, the rate (g/m3) and the exposure time (h) CZ, DK, EL, (Crete, Lesvos) IRL, S, UK (except the Isle of Man)'.

23. 

((a)) Point 1.7. is replaced by the following:
' 1.7. 

((a)) has been obtained in whole or part from Platanus L., including wood which has not kept its natural round surface;
and
((b)) meets one of the following descriptions laid down in Annex I, Part two to Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff:

CN code Description
4401 10 00 Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms
4401 22 00 Non-coniferous wood, in chips or particles
ex 4401 30 90 Wood waste and scrap (other than sawdust), not agglomerated in logs, briquettes, pellets or similar forms
4403 10 00 Wood in the rough, treated with paint, stains, creosote or other preservatives, not stripped of bark or sapwood, or roughly squared
ex 4403 99 Non-coniferous wood (other than tropical wood specified in subheading note 1 to Chapter 44 or other tropical wood, oak (Quercus spp.) or beech (Fagus spp.)), in the rough, whether or not stripped of bark or sapwood, or roughly squared, not treated with paint, stains, creosote or other preservatives
ex 4404 20 00 Non-coniferous split poles; piles, pickets and stakes of non-coniferous wood, pointed but not sawn lengthwise
ex 4407 99 Non-coniferous wood (other than tropical wood specified in subheading note 1 to Chapter 44 or other tropical wood, oak (Quercus spp.) or beech (Fagus spp.)), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm.
'
((b)) point 1.8. is deleted

24. 

((a)) point 1.10. is replaced by the following:
' 1.10. 

((a)) has been obtained in whole or part from

— conifers (Coniferales), excluding wood which is bark-free,
— Castanea Mill., excluding wood which is bark-free;
and
((b)) meets one of the following descriptions laid down in Annex I, Part two to Council Regulation (EEC) No 2658/87:

CN code Description
4401 10 00 Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms
4401 21 00 Coniferous wood, in chips or particles
4401 22 00 Non-coniferous wood, in chips or particles
ex 4401 30 Wood waste and scrap (other than sawdust), not agglomerated in logs, briquettes, pellets or similar forms
ex 4403 10 00 Wood in the rough, treated with paint, stains, creosote or other preservatives, not stripped of bark or sapwood, or roughly squared
ex 4403 20 Coniferous wood in the rough, not stripped of bark or sapwood, or roughly squared, not treated with paint, stains, creosote or other preservatives
ex 4403 99 Non-coniferous wood (other than tropical wood specified in subheading note 1 to Chapter 44 or other tropical wood, oak (Quercus spp.) or beech (Fagus spp.)), in the rough, whether or not stripped of bark or sapwood, or roughly squared, not treated with paint, stains, creosote or other preservatives
ex 4404 Split poles: piles, pickets and stakes of wood, pointed, but not sawn lengthwise
4406 Railway or tramway sleepers (cross-ties) of wood
4407 10 Coniferous wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm
ex 4407 99 Non-coniferous wood (other than tropical wood specified in subheading note 1 to Chapter 44 or other tropical wood, oak (Quercus spp.) or beech (Fagus spp.)), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm.
'
((b)) point 1.11. is replaced by the following:
' 1.11. Isolated bark of Castanea Mill, and conifers (Coniferales)
'.

25. 
'
— Acer saccharum Marsh., originating in the USA and Canada.'

26. 
'
— conifers (Coniferales), originating in non-European countries.'

27. 
' 6. 

((a)) has been obtained in whole or part from one of the order, genera or species as described hereafter, except wood packaging material defined in Annex IV, Part A, Section I, Point 2:

— Quercus L., including wood which has not kept its natural round surface, originating in the USA, except wood which meets the description referred to in (b) of CN code 4416 00 00 and where there is documented evidence that the wood has been processed or manufactured using a heat treatment to achieve a minimum temperature of 176 °C for 20 minutes,
— Platanus, including wood which has not kept its natural round surface, originating in the USA or Armenia,
— Populus L., including wood which has not kept its natural round surface, originating in countries of the American continent,
— Acer saccharum Marsh., including wood which has not kept its natural round surface, originating in the USA and Canada,
— Conifers (Coniferales), including wood which has not kept its natural round surface, originating in non-European countries, Kazakhstan, Russia and Turkey;
and
((b)) meets one of the following descriptions laid down in Annex I, Part two to Council Regulation (EEC) No 2658/87:

CN code Description
4401 10 00 Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms
4401 21 00 Coniferous wood, in chips or particles
4401 22 00 Non-coniferous wood, in chips or particles
4401 30 10 Sawdust
ex 4401 30 90 Other wood waste and scrap, not agglomerated in logs, briquettes, pellets or similar forms
4403 10 00 Wood in the rough, treated with paint, stains, creosote or other preservatives, not stripped of bark or sapwood, or roughly squared
4403 20 Coniferous wood in the rough, other than treated with paint, stains, creosote or other preservatives, whether or not stripped of bark or sapwood, or roughly squared
4403 91 Oak wood (Quercus spp.) in the rough, other than treated with paint, stains, creosote or other preservatives, whether or not stripped of bark of sapwood, or roughly squared
ex 4403 99 Non-coniferous wood (other than tropical wood specified in subheading note 1 to Chapter 44 or other tropical wood, oak (Quercus spp.) or beech (Fagus spp.)), in the rough, whether or not stripped of bark or sapwood, or roughly squared, not treated with paint, stains, creosote or other preservatives
ex 4404 Split poles; piles, pickets and stakes of wood, pointed but not sawn lengthwise
4406 Railway or tramway sleepers (cross-ties) of wood
4407 10 Coniferous wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm
4407 91 Oak wood (Quercus spp.), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm
ex 4407 99 Non-coniferous wood (other than tropical wood specified in subheading note 1 to Chapter 44 or other tropical wood, oak (Quercus spp.) or beech (Fagus spp.)), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm
4415 Packing cases, boxes, crates, drums and similar packings, of wood; cable-drums of wood; pallets, box pallets and other load boards, of wood; pallet collars of wood
4416 00 00 Casks, barrels, vats, tubs and other coopers’ products and parts thereof, of wood, including staves
9406 00 20 Prefabricated buildings of wood.
'

28. 
' 7. 

((a)) has been obtained in whole or part from conifers (Coniferales), excluding wood which is bark-free originating in European third countries, and Castanea Mill., excluding wood which is bark-free
and
((b)) meets one of the following descriptions laid down in Annex I, Part two to Council Regulation (EEC) No 2658/87:

CN code Description
4401 10 00 Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms
4401 21 00 Coniferous wood, in chips or particles
4401 22 00 Non-coniferous wood, in chips or particles
ex 4401 30 Wood waste and scrap (other than sawdust), not agglomerated in logs, briquettes, pellets or similar forms
ex 4403 10 00 Wood in the rough, treated with paint, stains, creosote or other preservatives, not stripped of bark or sapwood, or roughly squared
ex 4403 20 Coniferous wood in the rough, other than treated with paint, stains, creosote or other preservatives, not stripped of bark or sapwood or roughly squared
ex 4403 99 Non-coniferous wood (other than tropical wood specified in subheading note 1 to Chapter 44 or other tropical wood, oak (Quercus spp.) or beech (Fagus spp.)), in the rough, whether or not stripped of bark or sapwood, or roughly squared, not treated with paint, stains, creosote or other preservatives
ex 4404 Split poles; piles, pickets and stakes of wood, pointed but not sawn lengthwise
4406 Railway or tramway sleepers (cross-ties) of wood
4407 10 Coniferous wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm
ex 4407 99 Non-coniferous wood (other than tropical wood specified in subheading note 1 to Chapter 44 or other tropical wood, oak (Quercus spp.) or beech (Fagus spp.)), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm
4415 Packing cases, boxes, crates, drums and similar packings, of wood; cable-drums of wood; pallets, box pallets and other load boards, of wood; pallet collars of wood
9406 00 20 Prefabricated buildings of wood.
'

29. 
'9. Isolated bark of conifers (Coniferales) originating in European third countries.'.
