
Article 1 
The goods described in column 1 of the annexed table are now classified within the combined nomenclature under the appropriate CN codes indicated in column 2 of the said table.
Article 2 
Binding tariff information issued by the customs authorities of Member States which do not conform to the rights established by this Regulation can continue to be invoked under the provisions of Article 12 (6) of Regulation (EEC) No 2913/92 for a period of three months.
Article 3 
This Regulation shall enter into force on the 21st day following its publication in the Official Journal of the European Communities.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 27 December 1994.
For the Commission
Christiane SCRIVENER
Member of the Commission
ANNEX

Description Classification (CN code) Reasons
(1) (2) (3)

1. 

— shore hardness (A type) of 70 ± 5,
— raised molding parting line not exceeding 0,05 mm,
— diameter not exceeding 22 mm, and
— total weight of 31 grams (± 1 gram)

designed for use in the manufacture of a pointing device (so called ‘computer mouse’).
 8473 30 90 Classification is determined by the provisions of General Rules 1 and 6 for the interpretation of the combined nomenclature, Note 2 b) to Section XVI and by the wording of CN codes 8473, 8473 30 and 8473 30 90.

2. A magnetic floppy disk on which an analogue (waveform) signal has been recorded during manufacture, solely for the purpose of checking the quality of the disk's magnetic coating.
 8523 20 90 Classification is determined by the provisions of General Rules 1 and 6 for the interpretation of the combined nomenclature and by the wording of CN codes 8523, 8523 20 and 8523 20 90.As the analogue signal in question cannot serve any purpose after manufacture, such a signal cannot be considered as a recording within the meaning of heading 8524.

3. 
The function of the junction box is to reduce the signal voltage fed through the cable to the television receivers and, by means of a filter, to prevent the supply voltage for the amplifiers from reaching the television receivers.
 8543 80 80 Classification is determined by the provisions of General Rules 1 and 6 for the interpretation of the combined nomenclature and by the wording of CN codes 8543, 8543 80 and 8543 80 80.The junction box in design and function is not an apparatus for making connections to or in electrical circuits within the meaning of heading 8536. Although used as a part for television systems, it is an appliance having an individual function.