
Article 1 
The substances specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.
Article 2 

1. The substances specified in the Annex and premixtures containing those substances, which are produced and labelled before 8 May 2021 in accordance with the rules applicable before 8 November 2020 may continue to be placed on the market and used until the existing stocks are exhausted.
2. Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 8 November 2021 in accordance with the rules applicable before 8 November 2020 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.
3. Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 8 November 2022 in accordance with the rules applicable before 8 November 2020 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.
Article 3 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 16 October 2020.
For the Commission
The President
Ursula VON DER LEYEN
ANNEX

Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
mg of active substance/kg of complete feedingstuff with a moisture content of 12 %
Category: Sensory additives. Functional group: Flavouring compounds
2b02017 - Cinnamyl alcohol Additive compositionCinnamyl alcoholCharacterisation of the active substanceCinnamyl alcoholProduced by chemical synthesisPurity: min. 98 % assayChemical formula: C9H10OCAS number: 104-54-1FLAVIS No: 02.017Method of analysisFor the determination of cinnamyl alcohol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 8.11.2030
2b02031 - 3-Phenylpropan-1-ol Additive composition3-Phenylpropan-1-olCharacterisation of the active substance3-Phenylpropan-1-olProduced by chemical synthesisPurity: min. 98 % assayChemical formula: C9H12OCAS number: 122-97-4FLAVIS No: 02.031Method of analysisFor the determination 3-phenylpropan-1-ol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 8.11.2030
2b05038 - 2-Phenylpropanal Additive composition2-PhenylpropanalCharacterisation of the active substance2-PhenylpropanalProduced by chemical synthesisPurity: min. 95 % assayChemical formula: C9H10OCAS number: 93-53-8FLAVIS No: 05.038Method of analysisFor the determination 2-phenylpropanal in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be:
For cats: 1 mg/kg, and for other species and categories: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:

— 1 mg/kg for cats;
— 5 mg/kg for other species and categories.’
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded:

— 1 mg/kg for cats;
— 5 mg/kg for other species and categories.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves 8.11.2030
2b05045 - 3-(p-Cumenyl)-2-methylpropionalde-hyde Additive composition3-(p-Cumenyl)-2-methylpropionalde-hydeCharacterisation of the active substance3-(p-Cumenyl)-2-methylpropionalde-hydeProduced by chemical synthesisPurity: min. 90 % assayChemical formula: C13H18OCAS number: 103-95-7FLAVIS No: 05.045Method of analysisFor the determination of 3-(p-Cumenyl)-2-methylpropionalde-hyde in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 8.11.2030
2b05050 - Alpha-methylcinnamaldehyde Additive compositionAlpha-methylcinnamaldehydeCharacterisation of the active substanceAlpha-methylcinnamaldehydeProduced by chemical synthesisPurity: min. 95 % assayChemical formula: C10H10OCAS number: 101-39-3FLAVIS No: 05.050Method of analysisFor the determination of alpha-methylcinnamaldehyde in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 8.11.2030
2b05080 - 3-Phenylpropanal Additive composition3-PhenylpropanalCharacterisation of the active substance3-PhenylpropanalProduced by chemical synthesisPurity: min. 95 % assayChemical formula: C9H10OCAS number:104-53-0FLAVIS No: 05.080Method of analysisFor the determination of 3-phenylpropanal in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 8.11.2030
2b08022 - Cinnamic acid Additive compositionCinnamic acidCharacterisation of the active substanceCinnamic acidProduced by chemical synthesisPurity: min. 98 % assayChemical formula: C9H8O2CAS number: 621-82-9FLAVIS No: 08.022Method of analysisFor the determination of cinnamic acid in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 8.11.2030
2b09018 - Cinnamyl acetate Additive compositionCinnamyl acetateCharacterisation of the active substanceCinnamyl acetateProduced by chemical synthesisPurity: min.98 % assayChemical formula: C11H12O2CAS number: 103-54-8FLAVIS No: 09.018Method of analysisFor the determination of cinnamyl acetate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 8.11.2030
2b09053 - Cinnamyl butyrate Additive compositionCinnamyl butyrateCharacterisation of the active substanceCinnamyl butyrateProduced by chemical synthesisPurity: min. 98 % assayChemical formula: C13H16O2CAS number: 103-61-7FLAVIS No: 09.053Method of analysisFor the determination of cinnamyl butyrate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 8.11.2030
2b09428 - 3-Phenylpropyl isobutyrate Additive composition3-Phenylpropyl isobutyrateCharacterisation of the active substance3-Phenylpropyl isobutyrateProduced by chemical synthesisPurity: min. 98 % assayChemical formula: C13H18O2CAS number: 103-58-2FLAVIS No: 09.428.Method of analysisFor the determination of 3-phenylpropyl isobutyrate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 8.11.2030
2b09459 - Cinnamyl isovalerate Additive compositionCinnamyl isovalerateCharacterisation of the active substanceCinnamyl isovalerateProduced by chemical synthesisPurity: min. 95 % assayChemical formula: C14H18O2CAS number: 140-27-2FLAVIS No: 09.459Method of analysisFor the determination of cinnamyl isovalerate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 8.11.2030
2b09470 - Cinnamyl isobutyrate Additive compositionCinnamyl isobutyrateCharacterisation of the active substanceCinnamyl isobutyrateProduced by chemical synthesisPurity: min. 96 % assayChemical formula: C13H16O2CAS number: 103-59-3FLAVIS No: 09.470Method of analysisFor the determination of cinnamyl isobutyrate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 8.11.2030
2b09730 - Ethyl cinnamate Additive compositionEthyl cinnamateCharacterisation of the active substanceEthyl cinnamateProduced by chemical synthesisPurity: min. 98 % assayChemical formula: C11H12O2CAS number: 103-36-6FLAVIS No: 09.730Method of analysisFor the determination of ethyl cinnamate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 8.11.2030
2b09740 - Methyl cinnamate Additive compositionMethyl cinnamateCharacterisation of the active substanceMethyl cinnamateProduced by chemical synthesisPurity: min. 98 % assayChemical formula: C10H10O2CAS number: 103-26-4FLAVIS No: 09.740Method of analysisFor the determination of methyl cinnamate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 8.11.2030
2b09742 - Isopentyl cinnamate Additive compositionIsopentyl cinnamateCharacterisation of the active substanceIsopentyl cinnamateProduced by chemical synthesisPurity: min. 97 % assayChemical formula: C14H18O2CAS number: 7779-65-9FLAVIS No: 09.742Method of analysisFor the determination of isopentyl cinnamate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 8.11.2030
