
Article 1 
The substances specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.
Article 2 

1. The substances specified in the Annex and premixtures containing those substances, which are produced and labelled before 26 April 2021 in accordance with the rules applicable before 26 October 2020 may continue to be placed on the market and used until the existing stocks are exhausted.
2. Feed materials and compound feed containing the substances specified in the Annex which are produced and labelled before 26 October 2021 in accordance with the rules applicable before 26 October 2020 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.
3. Feed materials and compound feed containing the substances specified in the Annex which are produced and labelled before 26 October 2022 in accordance with the rules applicable before 26 October 2020 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.
Article 3 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 5 October 2020.
For the Commission
The President
Ursula VON DER LEYEN
ANNEX

Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
mg of active substance/kg of complete feedingstuff with a moisture content of 12 %
Category: Sensory additives. Functional group: Flavouring compounds
2b02012 - Geraniol Additive compositionGeraniolCharacterisation of the active substanceGeraniolProduced by fractional distillation of an essential oil or by chemical synthesisPurity: min. 95 % assayChemical formula: C10H18OCAS number: 106-24-1FLAVIS No: 02.012Method of analysisFor the determination of geraniol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture of flavourings.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 25 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 25 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 26.10.2030
2b02029 - 3,7,11-Trimethyldodeca-2,6,10-trien-1-ol Additive composition3,7,11-Trimethyldodeca-2,6,10-trien-1-olCharacterisation of the active substance3,7,11-Trimethyldodeca-2,6,10-trien-1-olProduced by chemical synthesisPurity: min. 96 % assayChemical formula: C15H26OCAS number: 4602-84-0FLAVIS No: 02.029Method of analysisFor the determination of 3,7,11-Trimethyldodeca-2,6,10-trien-1-ol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture of flavourings.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 26.10.2030
2b02058 - (Z)-Nerol Additive composition(Z)-NerolCharacterisation of the active substance(Z)-NerolProduced by chemical synthesisPurity: min. 95 % assayChemical formula: C10H18OCAS number: 106-25-2FLAVIS No: 02.058Method of analysisFor the determination of (Z)-nerol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture of flavourings.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 26.10.2030
2b05020 - Citral Additive compositionCitralCharacterisation of the active substanceCitralProduced by chemical synthesisPurity: min. 96 % assayChemical formula: C10H16OCAS number: 5392-40-5FLAVIS No: 05.020Method of analysisFor the determination of citral in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture of flavourings.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 25 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 25 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 26.10.2030
2b09011 - Geranyl acetate Additive compositionGeranyl acetateCharacterisation of the active substanceGeranyl acetateProduced by chemical synthesisPurity: min. 90 % assayChemical formula: C12H20O2CAS number: 105-87-3FLAVIS No: 09.011Method of analysisFor the determination of geranyl acetate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture of flavourings.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 26.10.2030
2b09048 - Geranyl butyrate Additive compositionGeranyl butyrateCharacterisation of the active substanceGeranyl butyrateProduced by chemical synthesisPurity: min. 92 % assayChemical formula: C14H24O2CAS number: 106-29-6FLAVIS No: 09.048Method of analysisFor the determination of geranyl butyrate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture of flavourings.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 26.10.2030
2b09076 - Geranyl formate Additive compositionGeranyl formateCharacterisation of the active substanceGeranyl formateProduced by chemical synthesisPurity: min. 94 % assayChemical formula: C11H18O2CAS number: 105-86-2FLAVIS No: 09.076Method of analysisFor the determination of geranyl formate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture of flavourings.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 26.10.2030
2b09128 - Geranyl propionate Additive compositionGeranyl propionateCharacterisation of the active substanceGeranyl propionateProduced by chemical synthesisPurity: min. 92 % assayChemical formula: C13H22O2CAS number: 105-90-8FLAVIS No: 09.128Method of analysisFor the determination of geranyl propionate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture of flavourings.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 26.10.2030
2b09169 - Neryl propionate Additive compositionNeryl propionateCharacterisation of the active substanceNeryl propionateProduced by chemical synthesisPurity: min. 95 % assayChemical formula: C13H22O2CAS number: 105-91-9FLAVIS No: 09.169Method of analysisFor the determination of neryl propionate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture of flavourings.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 %exceeds 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 26.10.2030
2b09212 - Neryl formate Additive compositionNeryl formateCharacterisation of the active substanceNeryl formateProduced by chemical synthesisPurity: min. 90 % assayChemical formula: C11H18O2CAS number: 2142-94-1FLAVIS No: 09.212Method of analysisFor the determination of neryl formate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture of flavourings.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 26.10.2030
2b09213 - Neryl acetate Additive compositionNeryl acetateCharacterisation of the active substanceNeryl acetateProduced by chemical synthesisPurity: min. 93 % assayChemical formula: C12H20O2CAS number: 141-12-8FLAVIS No: 09.213Method of analysisFor the determination of neryl acetate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture of flavourings.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 26.10.2030
2b09424 - Neryl isobutyrate Additive compositionNeryl isobutyrateCharacterisation of the active substanceNeryl isobutyrateProduced by chemical synthesisPurity: min. 92 % assayChemical formula: C14H24O2CAS number: 2345-24-6FLAVIS No: 09.424Method of analysisFor the determination of neryl isobutyrate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture of flavourings.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 26.10.2030
2b09431 - Geranyl isobutyrate Additive compositionGeranyl isobutyrateCharacterisation of the active substanceGeranyl isobutyrateProduced by chemical synthesisPurity: min. 95 % assayChemical formula: C14H24O2CAS number: 2345-26-8FLAVIS No: 09.431Method of analysisFor the determination of geranyl isobutyrate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture of flavourings.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 26.10.2030
2b09692 - Prenyl acetate Additive compositionPrenyl acetateCharacterisation of the active substancePrenyl acetateProduced by chemical synthesisPurity: min. 95 % assayChemical formula: C7H12O2CAS number: 1191-16-8FLAVIS No: 09.692Method of analysisFor the determination of prenyl acetate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species except marine animals - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture of flavourings.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 1 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 1 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 26.10.2030
