
Article 1 
Annex I to Implementing Decision (EU) 2019/436 is amended in accordance with Annex I to this Decision.
Article 2 
Annex III to Implementing Decision (EU) 2019/436 is amended in accordance with Annex II to this Decision.
Article 3 
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
Point (1) of Annex I shall apply from 2 October 2021..Done at Brussels, 1 April 2020.
For the Commission
The President
Ursula VON DER LEYEN
ANNEX I

Annex I to Implementing Decision (EU) 2019/436 is amended as follows:

((1)) row 35 is replaced by the following:
'
35. EN 62841-2-1:2018Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-1: Particular requirements for hand-held drills and impact drills (IEC 62841-2-1:2017, Modified)EN 62841-2-1:2018/A11:2019 C'
((2)) the following rows are added:
'
43. EN ISO 18497:2018Agricultural machinery and tractors – Safety of highly automated agricultural machines – Principles for design (ISO 18497:2018) B
44. EN ISO 19353:2019Safety of machinery – Fire prevention and fire protection (ISO 19353:2019) B
45. EN 707:2018Agricultural machinery – Slurry tankers – Safety C
46. EN 1459-2:2015+A1:2018Rough-terrain trucks – Safety requirements and verification – Part 2: Slewing variable-reach trucks C
47. EN ISO 3691-5:2015Industrial trucks – Safety requirements and verification – Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) C
48. EN ISO 4254-9:2018Agricultural machinery – Safety – Part 9: Seed drills (ISO 4254-9:2018) C
49. EN ISO 10517:2019Powered hand-held hedge trimmers – Safety (ISO 10517:2019) C
50. EN ISO 11148-13:2018Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools (ISO 11148-13:2017) C
51. EN 12012-1:2018Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators and shredders C
52. EN 12312-8:2018Aircraft ground support equipment – Specific requirements – Part 8: Maintenance or service stairs and platforms C
53. EN 12733:2018Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety C
54. EN 14033-4:2019Railway applications – Track – Railbound construction and maintenance machines – Part 4: Technical requirements for running, travelling and working on urban rail C
55. EN 16712-4:2018Portable equipment for projecting extinguishing agents supplied by firefighting pumps – Portable foam equipment – Part 4: High expansion foam generators PN16 C
56. EN 16770:2018Safety of woodworking machines – Chip and dust extraction systems for indoor installation – Safety requirements C
57. EN 16985:2018Spray booths for organic coating material – Safety requirements C
58. EN 17067:2018Forestry machinery – Safety requirements on radio remote controls C
59. EN ISO 19296:2018Mining – Mobile machines working underground – Machine safety (ISO 19296:2018) C
60. EN ISO 28927-4:2010Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4:2010)EN ISO 28927-4:2010/A1:2018 C
61. EN 60204-1:2018Safety of machinery – Electrical equipment of machines – Part 1: General requirements (IEC 60204-1:2016, Modified) B
62. EN IEC 60204-11:2019Safety of machinery – Electrical equipment of machines – Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV (IEC 60204-11:2018) B
63. EN 62841-4-2:2019Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-2: Particular requirements for hedge trimmers (IEC 62841-4-2:2017, Modified) C
64. EN 62841-3-12:2019Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-12: Particular requirements for transportable threading machines (IEC 62841-3-12:2017) C
65. EN 62841-2-21:2019Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-21: Particular requirements for hand-held drain cleaners (IEC 62841-2-21:2017, Modified) C
66. EN ISO 20607:2019Safety of machinery – Instruction handbook – General drafting principles (ISO 20607:2019) B
67. EN ISO 19085-7:2019Woodworking machines – Safety – Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019) C
68. EN 1114-3:2019Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs C
69. EN 1127-1:2019Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology B'

ANNEX II

In Annex III to Implementing Decision (EU) 2019/436, the following rows are added:
'
39. EN ISO 28927-4:2010Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4:2010) 2 April 2020 C
40. EN ISO 19353:2016Safety of machinery – Fire prevention and fire protection (ISO 19353:2015) 2 October 2021 B
41. EN 707:1999+A1:2009Agricultural machinery – Slurry tankers – Safety 2 October 2021 C
42. EN 792-13:2000+A1:2008Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools 2 October 2021 C
43. EN 1889-1:2011Machines for underground mines – Mobile machines working underground – Safety – Part 1: Rubber tyred vehicles 2 October 2021 C
44. EN ISO 3691-5:2014Industrial trucks – Safety requirements and verification – Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014)EN ISO 3691-5:2014/AC:2014 2 October 2021 C
45. EN ISO 10517:2009Powered hand-held hedge trimmers – Safety (ISO 10517:2009)EN ISO 10517:2009/A1:2013 2 October 2021 C
46. EN 12012-1:2007+A1:2008Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators 2 October 2021 C
47. EN 12012-3:2001+A1:2008Plastics and rubber machines – Size reduction machines – Part 3: Safety requirements for shredders 2 October 2021 C
48. EN 12312-8:2005+A1:2009Aircraft ground support equipment – Specific requirements – Part 8: Maintenance stairs and platforms 2 October 2021 C
49. EN 12733:2001+A1:2009Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety 2 October 2021 C
50. EN 12981:2005+A1:2009Coating plants – Spray booths for application of organic powder coating material – Safety requirements 2 October 2021 C
51. EN 13355:2004+A1:2009Coating plants – Combined booths – Safety requirements 2 October 2021 C
52. EN 14018:2005+A1:2009Agricultural and forestry machinery – Seed drills – Safety 2 October 2021 C
53. EN 60204-1:2006Safety of machinery – Electrical equipment of machines – Part 1: General requirements (IEC 60204-1:2005, Modified)EN 60204-1:2006/AC:2010EN 60204-1:2006/A1:2009 2 October 2021 B
54. EN 60204-11:2000Safety of machinery – Electrical equipment of machines – Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV (IEC 60204-11:2000)EN 60204-11:2000/AC:2010 2 October 2021 B
55. EN 848-3:2012Safety of woodworking machines – One side moulding machines with rotating tool – Part 3: Numerically controlled (NC) boring and routing machines 2 October 2021 C
56. EN ISO 28927-2:2009Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) 2 October 2021 C
57. EN 60745-2-21:2009Hand-held motor-operated electric tools – Safety – Part 2-21: Particular requirements for drain cleaners (IEC 60745-2-21:2002, Modified)EN 60745-2-21:2009/A1:2010 2 October 2021 C
58. EN 859:2007+A2:2012Safety of woodworking machines – Hand fed surface planing machines 2 October 2021 C
59. EN 860:2007+A2:2012Safety of woodworking machines – One side thickness planing machines 2 October 2021 C
60. EN 861:2007+A2:2012Safety of woodworking machines – Surface planing and thicknessing machines 2 October 2021 C
61. EN 1114-3:2001+A1:2008Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs 2 October 2021 C
62. EN 1127-1:2011Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology 2 October 2021 B
63. EN 1459-2:2015Rough-terrain trucks – Safety requirements and verification – Part 2: Slewing variable-reach trucks 2 October 2021 C'
