
Article 1 
The references of the harmonised standards for active implantable medical devices drafted in support of Directive 90/385/EEC and listed in Annex I to this Decision are hereby published in the Official Journal of the European Union.
Article 2 
Commission communication 2017/C 389/02 is repealed. It shall continue to apply until 30 September 2021 in respect of the references of the harmonised standards listed in Annex II to this Decision.
Article 3 
The harmonised standards for active implantable medical devices drafted in support of Directive 90/385/EEC and listed in Annexes I and II to this Decision may not be used to confer presumption of conformity with the requirements of Regulation (EU) 2017/745.
Article 4 
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
It shall apply until 26 May 2024.
Done at Brussels, 24 March 2020.
For the Commission
The President
Ursula VON DER LEYEN
ANNEX I

No Reference of the standard
1. EN 556-1:2001Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 1: Requirements for terminally sterilized medical devicesEN 556-1:2001/AC:2006
2. EN 556-2:2015Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 2: Requirements for aseptically processed medical devices
3. EN 1041:2008Information supplied by the manufacturer of medical devices
4. EN ISO 10993-1:2009Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process (ISO 10993-1:2009)EN ISO 10993-1:2009/AC:2010
5. EN ISO 10993-3:2014Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:2014)
6. EN ISO 10993-4:2009Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO 10993-4:2002, including Amd 1:2006)
7. EN ISO 10993-5:2009Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity (ISO 10993-5:2009)
8. EN ISO 10993-6:2009Biological evaluation of medical devices - Part 6: Tests for local effects after implantation (ISO 10993-6:2007)
9. EN ISO 10993-7:2008Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals (ISO 10993-7:2008)EN ISO 10993-7:2008/AC:2009
10. EN ISO 10993-9:2009Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:2009)
11. EN ISO 10993-11:2018Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993-11:2017)
12. EN ISO 10993-12:2012Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012)
13. EN ISO 10993-13:2010Biological evaluation of medical devices - Part 13: Identification and quantification of degradation products from polymeric medical devices (ISO 10993-13:2010)
14. EN ISO 10993-16:2010Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:2010)
15. EN ISO 10993-17:2009Biological evaluation of medical devices - Part 17: Establishment of allowable limits for leachable substances (ISO 10993-17:2002)
16. EN ISO 10993-18:2009Biological evaluation of medical devices - Part 18: Chemical characterization of materials (ISO 10993-18:2005)
17. EN ISO 11135-1:2007Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007)
18. EN ISO 11137-1:2015Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013)EN ISO 11137-1:2015/A2:2019
19. EN ISO 11137-2:2015Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013)
20. EN ISO 11138-2:2009Sterilization of health care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization processes (ISO 11138-2:2006)
21. EN ISO 11138-3:2009Sterilization of health care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization processes (ISO 11138-3:2006)
22. EN ISO 11140-1:2009Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2005)
23. EN ISO 11607-1:2009Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006)
24. EN ISO 11737-1:2006Sterilization of medical devices - Microbiological methods - Part 1: Determination of a population of microorganisms on products (ISO 11737-1:2006)EN ISO 11737-1:2006/AC:2009
25. EN ISO 11737-2:2009Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009)
26. EN ISO 13408-1:2015Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008, including Amd 1:2013)
27. EN ISO 13408-2:2018Aseptic processing of health care products - Part 2: Sterilizing filtration (ISO 13408-2:2018)
28. EN ISO 13408-3:2011Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006)
29. EN ISO 13408-4:2011Aseptic processing of health care products - Part 4: Clean-in-place technologies (ISO 13408-4:2005)
30. EN ISO 13408-5:2011Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408-5:2006)
31. EN ISO 13408-6:2011Aseptic processing of health care products - Part 6: Isolator systems (ISO 13408-6:2005)
32. EN ISO 13408-7:2015Aseptic processing of health care products - Part 7: Alternative processes for medical devices and combination products (ISO 13408-7:2012)
33. EN ISO 13485:2016Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016)EN ISO 13485:2016/AC:2018
34. EN ISO 14155:2011Clinical investigation of medical devices for human subjects - Good clinical practice (ISO 14155:2011)EN ISO 14155:2011/AC:2011
35. EN ISO 14937:2009Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009)
36. EN ISO 14971:2012Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01)
37. EN ISO 15223-1:2016Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO 15223-1:2016, Corrected version 2017-03)
38. EN ISO 17665-1:2006Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006)
39. EN ISO 25424:2019Sterilization of health care products - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2018)
40. EN 45502-1:1997Active implantable medical devices - Part 1: General requirements for safety, marking and information to be provided by the manufacturer
41. EN 45502-2-1:2003Active implantable medical devices - Part 2-1: Particular requirements for active implantable medical devices intended to treat bradyarrhythmia (cardiac pacemakers)Notice: This European standard does not necessarily cover the requirements introduced by Directive 2007/47/EC.
42. EN 45502-2-2:2008Active implantable medical devices - Part 2-2: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable defibrillators)EN 45502-2-2:2008/AC:2009Notice: This European standard does not necessarily cover the requirements introduced by Directive 2007/47/EC.
43. EN 45502-2-3:2010Active implantable medical devices - Part 2-3: Particular requirements for cochlear and auditory brainstem implant systemsNotice: This European standard does not necessarily cover the requirements introduced by Directive 2007/47/EC.
44. EN 60601-1:2006Medical electrical equipment - Part 1: General requirements for basic safety and essential performance (IEC 60601-1:2005)EN 60601-1:2006/AC:2010EN 60601-1:2006/A1:2013 (IEC 60601-1:2005/A1:2012)
45. EN 60601-1-6:2010Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability (IEC 60601-1-6:2010)Notice: This European standard does not necessarily cover the requirements introduced by Directive 2007/47/EC.
46. EN 62304:2006Medical device software - Software life-cycle processes (IEC 62304:2006)EN 62304:2006/AC:2008Notice: This European standard does not necessarily cover the requirements introduced by Directive 2007/47/EC.
ANNEX II

No Reference of the standard
1. EN ISO 10993-11:2009Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993-11:2006)
2. EN ISO 11137-1:2015Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013)
3. EN ISO 13408-2:2011Aseptic processing of health care products - Part 2: Filtration (ISO 13408-2:2003)
4. EN ISO 13485:2016Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016)EN ISO 13485:2016/AC:2016