
Article 1 
Annex I to Regulation (EU) 2018/956 is amended in accordance with the Annex to this Regulation.
Article 2 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 13 March 2019.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX

Annex I to Regulation (EU) 2018/956 is amended as follows:

((1)) Part A is amended as follows:

((a)) point (d) is replaced by the following:
'
(d) for vehicles registered until 31 December 2019 where available, and for vehicles registered from 1 January 2020 in all cases, the code for the bodywork as specified in entry 38 of the certificate of conformity, including, where applicable, the supplementing digits referred to in Appendix 2 to Annex II to Directive 2007/46/EC;
'
((b)) the following point (f) is added:
'
(f) for vehicles registered from 1 January 2020, the maximum speed of the vehicle as specified in entry 29 of the certificate of conformity.
'
((2)) in Part B, point 2 is amended as follows:

((a)) entry 5 is replaced by the following:

No Monitoring parameters Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified Description
‘5 Axle certification number 1.7.2 Axle specifications’;
((b)) entry 15 is replaced by the following:

No Monitoring parameters Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified Description
‘15 Make (trade name of manufacturer) — Vehicle specifications’;
((c)) entry 21 is replaced by the following:

No Monitoring parameters Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified Description
‘21 Fuel type (Diesel CI/CNG PI/LNG PI …) 1.2.7 Engine specifications’;
((d)) entry 73 is replaced by the following:

No Monitoring parameters Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified Description
‘73 Cryptographic hash of the manufacturer's records file 3.1.4 Software information’;
((e)) the following entries 79 to 100 are added:

No Monitoring parameters Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified Description
‘79 Vehicle model 1.1.2 Vehicle specifications
80 Vocational vehicle (yes/no) 1.1.9
81 Zero emission heavy-duty vehicle (yes/no) 1.1.10
82 Hybrid electric heavy-duty vehicle (yes/no) 1.1.11
83 Dual-fuel vehicle (yes/no) 1.1.12
84 Sleeper cab (yes/no) 1.11.13
85 Engine model 1.2.1 Engine specifications
86 Transmission model 1.3.1 Transmission specifications
87 Retarder model 1.4.1 Retarder specifications
88 Retarder certification number 1.4.2
89 Certification option used for generation of a loss map (standard values/measurement) 1.4.3
90 Torque converter model 1.5.1 Torque converter specifications
91 Torque converter certification number 1.5.2
92 Certification option used for generation of a loss map (standard values/measurement) 1.5.3
93 Angle drive model 1.6.1 Angle drive specifications
94 Angle drive certification number 1.6.2
95 Axle model 1.7.1 Axle specifications
96 Air drag model 1.8.1 Aerodynamics
97 Engine stop-start during vehicle stops (yes/no) 1.12.1 Advanced driver assistance systems (ADAS)
98 Eco-roll without engine stop-start (yes/no) 1.12.2
99 Eco-roll with engine stop-start (yes/no) 1.12.3
100 Predictive cruise control (yes/no) 1.12.4

