
Article 1 
A Union authorisation is granted to Novadan ApS for the biocidal product family ‘Teat disinfectants biocidal product family of Novadan’ with authorisation number EU-0019757-0000.
The Union authorisation is valid from 7 April 2019 until 31 March 2029.
The Union authorisation is subject to compliance with the summary of the biocidal product characteristics set out in the Annex.
Article 2 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 13 March 2019.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX
Teat disinfectants biocidal product family of Novadan
Product type 3 — Veterinary hygiene (Disinfectants)
Authorisation number: EU-0019757-0000
R4BP asset number: EU-0019757-0000

PART I
1.  1.1. 

Name Teat disinfectants biocidal product family of Novadan
 1.2. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 1.3. 

Name and address of the authorisation holder Name Novadan ApS
Address Platinvej 21, 6000 Kolding, Denmark
Authorisation number EU-0019757-0000
R4BP asset number EU-0019757-0000
Date of the authorisation 7 April 2019
Expiry date of the authorisation 31 March 2029
 1.4. 

Name of manufacturer Novadan ApS
Address of manufacturer Platinvej 21, 6000 Kolding Denmark
Location of manufacturing sites Platinvej 21, 6000 Kolding Denmark
 1.5. 

Active substance Polyvinylpyrrolidone iodine
Name of manufacturer Marcus Research Laboratory, Inc.
Address of manufacturer Delmar Blvd., 63103-1789 Saint Louis, Missouri United States
Location of manufacturing sites Delmar Blvd., 63103-1789 Saint Louis, Missouri United States


Active substance Iodine
Name of manufacturer Cosayach Nitratos S.A.
Address of manufacturer Hnos Amunátegui 178, 8320000 Santiago Chile
Location of manufacturing sites S.C.M. Cosayach Cala Cala, 1180000 Pozo Almonte Chile


Active substance Iodine
Name of manufacturer ACF Minera S.A.
Address of manufacturer San Martin No 499, 11 00000 Iquique Chile
Location of manufacturing sites Lagunas mine, 1180000 Pozo Almonte Chile


Active substance Iodine
Name of manufacturer Sociedad Quimica y Minera (SQM) S.A.
Address of manufacturer Los Militares 4290, Piso 4, Las Condes, 8320000 Santiago Chile
Location of manufacturing sites Nueva Victoria plant, 5090000 Pedro de Valdivia plant Chile

2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,714 3,57
Iodine  Active Substance 7553-56-2 231-442-4 0,15 0,75
 2.2. 

Formulation(s) SL — Soluble concentrateAL — Any other liquidEW — Emulsion, oil in water

PART II 1.  1.1. 

Identifier meta-SPC 1
 1.2. 

Number 1-1
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  3,57 3,57
Iodine  Active Substance 7553-56-2 231-442-4 0,75 0,75
 2.2. 

Formulation(s) SL — Soluble concentrate
 3. 

Hazard statements May be corrosive to metals.Harmful to aquatic life with long lasting effects.Safety data sheet available on request.
Precautionary statements Keep out of reach of children.Keep only in original packaging.Avoid release to the environment.Absorb spillage to prevent material damage.Dispose of contents in accordance with local/regional/national/international regulation.Dispose of container in accordance with local/regional/national/international regulation.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Manual dipping (concentrate)Fill the reservoir with the diluted concentrate and screw the dip cup on top.Clean the teats carefully by wiping with a single service paper towel/cloth immediately before milking.After milking, squeeze the reservoir and put the dip cup over each teat from below making sure that the full length of the teat is immersed into the disinfectant. Top up with fresh disinfectant by squeezing the reservoir as needed.After disinfection, empty the reservoir and clean reservoir and dip cup by rinsing with water.
Application rate(s) and frequency Dilution: 20 %Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.1.1. 
See general directions for use.
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Manual spraying, trigger sprayer (concentrate)Fill the reservoir with the diluted concentrate and screw the top of the trigger sprayer on it.Clean the teats carefully by wiping with a single service paper towel/cloth immediately before milking.After milking, spray the disinfectant on the teats using the trigger sprayer making sure that each teat is covered with the disinfectant. Top up the reservoir with fresh disinfectant as needed.After disinfection, empty the reservoir and clean reservoir and sprayer by rinsing with water.
Application rate(s) and frequency Dilution: 20 %Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.2.1. 
See general directions for use.
 4.2.2. 
Wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) when applying the product by manual spraying.
 4.2.3. 
See general directions for use.
 4.2.4. 
See general directions for use.
 4.2.5. 
See general directions for use.
 4.3. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Manual spraying, electronic sprayer (concentrate)Open a can containing the diluted concentrate and insert the suction tube of the electronic sprayer.Clean the teats carefully by wiping with a single service paper towel/cloth immediately before milking.After milking, spray the disinfectant on the teats using the electronic sprayer making sure that each teat is covered with the disinfectant. Replace the empty can by a new can as needed. After disinfection, put the suction tube system into a bucket of water and rinse the sprayer by pumping the water through the sprayer.
Application rate(s) and frequency Dilution: 20 %Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.3.1. 
See general directions for use.
 4.3.2. 
Wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information) when applying the product by manual spraying.
 4.3.3. 
See general directions for use.
 4.3.4. 
See general directions for use.
 4.3.5. 
See general directions for use.
 4.4. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Automated dipping (concentrate)Open a can containing the diluted concentrate and insert the suction tube of the automated dipping-system.Before milking clean teats carefully by automatic procedure or manually.After milking, the vacuum is shut off and the teat dip is injected into a manifold on the claw piece. The teats are coated with 2-4 ml of dip when the teat cup is withdrawn by the Automatic Cluster Removal (ACR). After the removal of the ACR, every liner of the automated dipping-system is thoroughly rinsed with water and blown out with compressed air. In a final cleaning step after each milking session of the herd, the liners are disinfected (e.g. with a chlorine-based product) and blown out again with compressed air. Afterwards, the milking system is ready for the next milking event. The whole process is automated.
Application rate(s) and frequency Dilution: 20 %Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.4.1. 
See general directions for use.
 4.4.2. 
See general directions for use.
 4.4.3. 
See general directions for use.
 4.4.4. 
See general directions for use.
 4.4.5. 
See general directions for use.
 4.5. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Automated spraying by robot (concentrate)Open a can containing the diluted concentrate and insert the suction tube of the robotic milking device.The teats are cleaned by robot with automatic brushes. After robotic milking, 2-4 ml of the disinfectant is sprayed automatically onto teats from a cluster arm. Rinsing of the sprayer is automatic.
Application rate(s) and frequency Dilution: 20 %Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.5.1. 
See general directions for use.
 4.5.2. 
See general directions for use.
 4.5.3. 
See general directions for use.
 4.5.4. 
See general directions for use.
 4.5.5. 
See general directions for use.
 5.  5.1. 
Dilute the concentrated product by decanting or pumping. Fill the reservoir with the diluted concentrate and screw the dip cup on top. The concentrate is to be diluted 1:4 The concentrated products in meta-SPC 1 contain 0,89 % total iodine and are diluted 1:4 to an in-use solution containing 0,178 % total iodine. This corresponds to a 20 % (w/w) dilution.

The use of a dosing pump for filling the product into the application equipment is recommended.

The products must be brought to temperatures above 20 °C before use.

To ensure sufficient contact time, care should be taken that the product is not removed after application. Leave the product on the teats and keep the animals standing for at least five minutes after treatment for post-milking disinfection.
 5.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
 5.3. 
General: Remove affected person from source of contamination.

After inhalation: Remove person to fresh air and keep comfortable for breathing. Get medical attention if any discomfort continues.

After skin contact: Rinse with water. Remove contaminated clothing and shoes. Seek medical advice if any skin reaction/or discomfort occurs.

After eye contact: Immediately rinse with water (at least 15 minutes). Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if any discomfort continues.

After ingestion: Contact poison treatment specialist immediately if symptoms occur and/or in case of mouth contact with large quantities. Do not give fluids or induce vomiting in case of impaired consciousness; place in recovery position and seek medical advice immediately.

If medical advice is needed, have product container or label at hand.

Prevent run-off from entering drains, sewers or waterways

Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air)

Dike to collect larger liquid spills

Contain and/or absorb spill with inert material, then place in closed and suitable container for disposal according to regulations

Do not place spilled materials back into the original container
 5.4. 
Method of disposal: Dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

Empty containers are rinsed with plenty of water and disposed to normal or commercial waste.

The paper towels used for the cleaning of teats are disposed in the normal rubbish.

Product classified as hazardous waste: No

Packaging classified as hazardous waste: No

EWC waste code: EWC: 0706 wastes from the MFSU of fats, grease, soaps, detergents, disinfectants and cosmetics

Other information: When handling waste, consideration should be made to the safety precautions applying to handling of the product. Waste code applies to product remnants in pure form.
 5.5. 
Mentioned in the SDS: Keep in original container. Store the product away from direct sunlight in opaque containers. Keep separate from food, feedstuffs, fertilisers and other sensitive material. Store above freezing.

Storage temperature: 0 – 30 °C

Shelf-life: 24 months.
 6. 
pH range of meta-SPC 1: 4-5
 7.  7.1. 

Trade name(s) Nova DipIO DipUdder Des 1:4 JodEwodipJodopax vetFova Dip 1:4Tehotippi
Authorisation number EU-0019757-0001 1-1
Common name IUPAC name Function CAS number EC number Content (%)
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  3,57
Iodine  Active Substance 7553-56-2 231-442-4 0,75
 1.  1.1. 

Identifier meta-SPC 2
 1.2. 

Number 1-2
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  1,0 1,42
Iodine  Active Substance 7553-56-2 231-442-4 0,21 0,298
 2.2. 

Formulation(s) AL — Any other liquid
 3. 

Hazard statements Harmful to aquatic life with long lasting effects.Safety data sheet available on request.
Precautionary statements Keep out of reach of children.Avoid release to the environment.Dispose of contents in accordance with local/regional/national/international regulation.Dispose of container in accordance with local/regional/national/international regulation.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Manual dipping (RTU)Fill the reservoir with the RTU product and screw the dip cup on top.Clean the teats carefully by wiping with a single service paper towel/cloth immediately before milking.After milking, squeeze the reservoir and put the dip cup over each teat from below making sure that the full length of the teat is immersed into the disinfectant. Top up with fresh disinfectant by squeezing the reservoir as needed. After disinfection, empty the reservoir and clean reservoir and dip cup by rinsing with water.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.1.1. 
See general directions for use.
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Automated dipping (RTU)Open a can containing the RTU product and insert the suction tube of the automated dipping-system.Before milking clean teats carefully by automatic procedure or manually.After milking, the vacuum is shut off and the teat dip is injected into a manifold on the claw piece. The teats are coated with 2-4 ml of dip when the teat cup is withdrawn by the Automatic Cluster Removal (ACR). After the removal of the ACR, every liner of the automated dipping-system is thoroughly rinsed with water and blown out with compressed air. In a final cleaning step after each milking session of the herd, the liners are disinfected (e.g. with a chlorine-based product) and blown out again with compressed air. Afterwards, the milking system is ready for the next milking event. The whole process is automated.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.2.1. 
See general directions for use.
 4.2.2. 
See general directions for use.
 4.2.3. 
See general directions for use.
 4.2.4. 
See general directions for use.
 4.2.5. 
See general directions for use.
 5.  5.1. 
The products must be brought to temperatures above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

To ensure sufficient contact time, care should be taken that the product is not removed after application. Leave the product on the teats and keep the animals standing for at least five minutes after treatment for post-milking disinfection.
 5.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
 5.3. 
General: Remove affected person from source of contamination.

After inhalation: Remove person to fresh air and keep comfortable for breathing. Get medical attention if any discomfort continues.

After skin contact: Rinse with water. Remove contaminated clothing and shoes. Seek medical advice if any skin reaction/or discomfort occurs.

After eye contact: Immediately rinse with water (at least 15 minutes). Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if any discomfort continues.

After ingestion: Contact poison treatment specialist immediately if symptoms occur and/or in case of mouth contact with large quantities. Do not give fluids or induce vomiting in case of impaired consciousness; place in recovery position and seek medical advice immediately.

If medical advice is needed, have product container or label at hand.

Prevent run-off from entering drains, sewers or waterways

Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air)

Dike to collect larger liquid spills

Contain and/or absorb spill with inert material, then place in closed and suitable container for disposal according to regulations

Do not place spilled materials back into the original container
 5.4. 
Method of disposal: Dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

Empty containers are rinsed with plenty of water and disposed to normal or commercial waste.

The paper towels used for the cleaning of teats are disposed in the normal rubbish.

Product classified as hazardous waste: No

Packaging classified as hazardous waste: No

EWC waste code: EWC: 0706 wastes from the MFSU of fats, grease, soaps, detergents, disinfectants and cosmetics

Other information: When handling waste, consideration should be made to the safety precautions applying to handling of the product. Waste code applies to product remnants in pure form.
 5.5. 
Mentioned in the SDS: Keep in original container. Store the product away from direct sunlight in opaque containers. Keep separate from food, feedstuffs, fertilisers and other sensitive material. Store above freezing.

Storage temperature: 0 – 30 °C

Shelf-life: 24 months.
 6. 
pH range of meta-SPC 2: 4-5
 7.  7.1. 

Trade name(s) Jopo FilmIO Super DipBarrera Dip
Authorisation number EU-0019757-0002 1-2
Common name IUPAC name Function CAS number EC number Content (%)
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  1,42
Iodine  Active Substance 7553-56-2 231-442-4 0,298
 1.  1.1. 

Identifier meta-SPC 3
 1.2. 

Number 1-3
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,82 0,99
Iodine  Active Substance 7553-56-2 231-442-4 0,172 0,208
 2.2. 

Formulation(s) AL — Any other liquid
 3. 

Hazard statements Safety data sheet available on request.
Precautionary statements Keep out of reach of children.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Manual dipping (RTU)Fill the reservoir with the RTU product and screw the dip cup on top.Clean the teats carefully by wiping with a single service paper towel/cloth immediately before milking.After milking, squeeze the reservoir and put the dip cup over each teat from below making sure that the full length of the teat is immersed into the disinfectant. Top up with fresh disinfectant by squeezing the reservoir as needed. After disinfection, empty the reservoir and clean reservoir and dip cup by rinsing with water.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatmentPost-milking application 1-3 times per day (apply after every milking)
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.1.1. 
See general directions for use
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Automated dipping (RTU)Open a can containing the RTU product and insert the suction tube of the automated dipping-system.Before milking clean teats carefully by automatic procedure or manually.After milking, the vacuum is shut off and the teat dip is injected into a manifold on the claw piece. The teats are coated with 2-4 ml of dip when the teat cup is withdrawn by the Automatic Cluster Removal (ACR). After the removal of the ACR, every liner of the automated dipping-system is thoroughly rinsed with water and blown out with compressed air. In a final cleaning step after each milking session of the herd, the liners are disinfected (e.g. with a chlorine-based product) and blown out again with compressed air. Afterwards, the milking system is ready for the next milking event. The whole process is automated.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatmentPost-milking application 1-3 times per day (apply after every milking)
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.2.1. 
See general directions for use
 4.2.2. 
See general directions for use.
 4.2.3. 
See general directions for use.
 4.2.4. 
See general directions for use.
 4.2.5. 
See general directions for use.
 5.  5.1. 
Fill the reservoir with the RTU product and screw the dip cup on top.

The products must be brought to temperatures above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended

To ensure sufficient contact time, care should be taken that the product is not removed after application. Leave the product on the teats and keep the animals standing for at least five minutes after treatment for post-milking disinfection.
 5.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
 5.3. 
General: Remove affected person from source of contamination.

After inhalation: Remove person to fresh air and keep comfortable for breathing. Get medical attention if any discomfort continues.

After skin contact: Rinse with water. Remove contaminated clothing and shoes. Seek medical advice if any skin reaction/or discomfort occurs.

After eye contact: Immediately rinse with water (at least 15 minutes). Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if any discomfort continues.

After ingestion: Contact poison treatment specialist immediately if symptoms occur and/or in case of mouth contact with large quantities. Do not give fluids or induce vomiting in case of impaired consciousness; place in recovery position and seek medical advice immediately.

If medical advice is needed, have product container or label at hand.

Prevent run-off from entering drains, sewers or waterways

Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air)

Dike to collect larger liquid spills

Contain and/or absorb spill with inert material, then place in closed and suitable container for disposal according to regulations

Do not place spilled materials back into the original container
 5.4. 
Method of disposal: Dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

Empty containers are rinsed with plenty of water and disposed to normal or commercial waste.

The paper towels used for the cleaning of teats are disposed in the normal rubbish.

Product classified as hazardous waste: No

Packaging classified as hazardous waste: No

EWC waste code: EWC: 0706 wastes from the MFSU of fats, grease, soaps, detergents, disinfectants and cosmetics

Other information: When handling waste, consideration should be made to the safety precautions applying to handling of the product. Waste code applies to product remnants in pure form.
 5.5. 
Mentioned in the SDS: Keep in original container. Store the product away from direct sunlight in opaque containers. Keep separate from food, feedstuffs, fertilisers and other sensitive material. Store above freezing.

Storage temperature: 0 – 30 °C

Shelf-life: 18 months.
 6. 
pH range of meta-SPC 3: 4-5
 7.  7.1. 

Trade name(s) Nova Dip BarriereIO Multi Dip
Authorisation number EU-0019757-0003 1-3
Common name IUPAC name Function CAS number EC number Content (%)
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,82
Iodine  Active Substance 7553-56-2 231-442-4 0,172
 1.  1.1. 

Identifier meta-SPC 4
 1.2. 

Number 1-4
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,714 0,99
Iodine  Active Substance 7553-56-2 231-442-4 0,15 0,208
 2.2. 

Formulation(s) AL — Any other liquid
 3. 

Hazard statements Safety data sheet available on request.
Precautionary statements Keep out of reach of children.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Manual dipping (RTU)Fill the reservoir with the RTU product and screw the dip cup on top.Clean the teats carefully by wiping with a single service paper towel/cloth immediately before milking.After milking, squeeze the reservoir and put the dip cup over each teat from below making sure that the full length of the teat is immersed into the disinfectant. Top up with fresh disinfectant by squeezing the reservoir as needed. After disinfection, empty the reservoir and clean reservoir and dip cup by rinsing with water.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.1.1. 
See general directions for use.
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Manual spraying, trigger sprayer (RTU)Fill the reservoir with the RTU product and screw the top of the trigger sprayer on it.Clean the teats carefully by wiping with a single service paper towel/cloth immediately before milking.After milking, spray the disinfectant on the teats using the trigger sprayer making sure that each teat is covered with the disinfectant. Top up the reservoir with fresh disinfectant as needed. After disinfection, empty the reservoir and clean reservoir and trigger sprayer by rinsing with water.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.2.1. 
See general directions for use.
 4.2.2. 
Wear protective chemical resistant gloves when applying the product by manual spraying (glove material to be specified by the authorisation holder within the product information).
 4.2.3. 
See general directions for use.
 4.2.4. 
See general directions for use.
 4.2.5. 
See general directions for use.
 4.3. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Manual spraying, electronic sprayer (RTU)Open a can containing the RTU product and insert the suction tube of the electronic sprayer.Clean the teats carefully by wiping with a single service paper towel/cloth immediately before milking.After milking, spray the disinfectant on the teats using the electronic sprayer making sure that each teat is covered with the disinfectant. Replace the empty can by a new can as needed. After disinfection, put the suction tube system into a bucket of water and rinse the sprayer by pumping the water through the sprayer.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0.5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.3.1. 
See general directions for use.
 4.3.2. 
Wear protective chemical resistant gloves when applying the product by manual spraying (glove material to be specified by the authorisation holder within the product information).
 4.3.3. 
See general directions for use.
 4.3.4. 
See general directions for use.
 4.3.5. 
See general directions for use.
 4.4. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Automated dipping (RTU)Open a can containing the RTU product and insert the suction tube of the automated dipping-system.Before milking clean teats carefully by automatic procedure or manually.After milking, the vacuum is shut off and the teat dip is injected into a manifold on the claw piece. The teats are coated with 2-4 ml of dip when the teat cup is withdrawn by the Automatic Cluster Removal (ACR). After the removal of the ACR, every liner of the automated dipping-system is thoroughly rinsed with water and blown out with compressed air. In a final cleaning step after each milking session of the herd, the liners are disinfected (e.g. with a chlorine-based product) and blown out again with compressed air. Afterwards, the milking system is ready for the next milking event. The whole process is automated.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.4.1. 
See general directions for use.
 4.4.2. 
See general directions for use.
 4.4.3. 
See general directions for use.
 4.4.4. 
See general directions for use.
 4.4.5. 
See general directions for use.
 4.5. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Automated spraying by robot (RTU)Open a can containing the RTU product and insert the suction tube of the robotic milking device.The teats are cleaned by robot with automatic brushes. After robotic milking, 2-4 ml of the disinfectant is sprayed automatically onto teats from a cluster arm. Rinsing of the sprayer is automatic.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.5.1. 
See general directions for use.
 4.5.2. 
See general directions for use.
 4.5.3. 
See general directions for use.
 4.5.4. 
See general directions for use.
 4.5.5. 
See general directions for use.
 5.  5.1. 
Fill the reservoir with the RTU product and screw the dip cup on top.

The products must be brought to temperatures above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

To ensure sufficient contact time, care should be taken that the product is not removed after application. Leave the product on the teats and keep the animals standing for at least five minutes after treatment for post-milking disinfection.
 5.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
 5.3. 
General: Remove affected person from source of contamination.

After inhalation: Remove person to fresh air and keep comfortable for breathing. Get medical attention if any discomfort continues.

After skin contact: Rinse with water. Remove contaminated clothing and shoes. Seek medical advice if any skin reaction/or discomfort occurs.

After eye contact: Immediately rinse with water (at least 15 minutes). Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if any discomfort continues.

After ingestion: Contact poison treatment specialist immediately if symptoms occur and/or in case of mouth contact with large quantities. Do not give fluids or induce vomiting in case of impaired consciousness; place in recovery position and seek medical advice immediately.

If medical advice is needed, have product container or label at hand.

Prevent run-off from entering drains, sewers or waterways

Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air)

Dike to collect larger liquid spills

Contain and/or absorb spill with inert material, then place in closed and suitable container for disposal according to regulations

Do not place spilled materials back into the original container
 5.4. 
Method of disposal: Dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

Empty containers are rinsed with plenty of water and disposed to normal or commercial waste.

The paper towels used for the cleaning of teats are disposed in the normal rubbish.

Product classified as hazardous waste: No

Packaging classified as hazardous waste: No

EWC waste code: EWC: 0706 wastes from the MFSU of fats, grease, soaps, detergents, disinfectants and cosmetics

Other information: When handling waste, consideration should be made to the safety precautions applying to handling of the product. Waste code applies to product remnants in pure form.
 5.5. 
Mentioned in the SDS: Keep in original container. Store the product away from direct sunlight in opaque containers. Keep separate from food, feedstuffs, fertilisers and other sensitive material. Store above freezing.

Storage temperature: 0 – 30 °C

Shelf-life: 24 months.
 6. 
pH range of meta-SPC 4: 4-5
 7.  7.1. 

Trade name(s) Jopo SprayIO SprayBarrera SprayAgro Teat SprayNova Dip Ready for Use
Authorisation number EU-0019757-0004 1-4
Common name IUPAC name Function CAS number EC number Content (%)
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  0,714
Iodine  Active Substance 7553-56-2 231-442-4 0,15
 1.  1.1. 

Identifier meta-SPC 5
 1.2. 

Number 1-5
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  1,0 1,46
Iodine  Active Substance 7553-56-2 231-442-4 0,21 0,307
 2.2. 

Formulation(s) AL — Any other liquid
 3. 

Hazard statements Harmful to aquatic life with long lasting effects.Safety data sheet available on request.
Precautionary statements Keep out of reach of children.Avoid release to the environment.Dispose of contents in accordance with local/regional/national/international regulation.Dispose of container in accordance with local/regional/national/international regulation.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Manual dipping (RTU)Fill the reservoir with the RTU product and screw the dip cup on top.Clean the teats carefully by wiping with a single service paper towel/cloth immediately before milking.After milking, squeeze the reservoir and put the dip cup over each teat from below making sure that the full length of the teat is immersed into the disinfectant. Top up with fresh disinfectant by squeezing the reservoir as needed.. After disinfection, empty the reservoir and clean reservoir and dip cup by rinsing with water.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.1.1. 
See general directions for use.
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Manual spraying, trigger sprayer (RTU)Fill the reservoir with the RTU product and screw the top of the trigger sprayer on it.Clean the teats carefully by wiping with a single service paper towel/cloth immediately before milking.After milking, spray the disinfectant on the teats using the trigger sprayer making sure that each teat is covered with the disinfectant. Top up the reservoir with fresh disinfectant as needed.After disinfection, empty the reservoir and clean reservoir and trigger sprayer by rinsing with water.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.2.1. 
See general directions for use.
 4.2.2. 
Wear protective chemical resistant gloves when applying the product by manual spraying (glove material to be specified by the authorisation holder within the product information).
 4.2.3. 
See general directions for use.
 4.2.4. 
See general directions for use.
 4.2.5. 
See general directions for use.
 4.3. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Manual spraying, electronic sprayer (RTU)Open a can containing the RTU product and insert the suction tube of the electronic sprayer.Clean the teats carefully by wiping with a single service paper towel/cloth immediately before milking.After milking, spray the disinfectant on the teats using the electronic sprayer making sure that each teat is covered with the disinfectant. Replace the empty can by a new can as needed. After disinfection, put the suction tube system into a bucket of water and rinse the sprayer by pumping the water through the sprayer.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatmentPost-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.3.1. 
See general directions for use.
 4.3.2. 
Wear protective chemical resistant gloves when applying the product by manual spraying (glove material to be specified by the authorisation holder within the product information).
 4.3.3. 
See general directions for use.
 4.3.4. 
See general directions for use.
 4.3.5. 
See general directions for use.
 4.4. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Automated dipping (RTU)Open a can containing the RTU product and insert the suction tube of the automated dipping-system.Before milking clean teats carefully by automatic procedure or manually.After milking, the vacuum is shut off and the teat dip is injected into a manifold on the claw piece. The teats are coated with 2-4 ml of dip when the teat cup is withdrawn by the Automatic Cluster Removal (ACR). After the removal of the ACR, every liner of the automated dipping-system is thoroughly rinsed with water and blown out with compressed air. In a final cleaning step after each milking session of the herd, the liners are disinfected (e.g. with a chlorine-based product) and blown out again with compressed air. Afterwards, the milking system is ready for the next milking event. The whole process is automated.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0.5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.4.1. 
See general directions for use.
 4.4.2. 
See general directions for use.
 4.4.3. 
See general directions for use.
 4.4.4. 
See general directions for use.
 4.4.5. 
See general directions for use.
 4.5. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Automated spraying by robot (RTU)Open a can containing the RTU product and insert the suction tube of the robotic milking device.The teats are cleaned by robot with automatic brushes. After robotic milking, 2-4 ml of the disinfectant is sprayed automatically onto teats from a cluster arm. Rinsing of the sprayer is automatic.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0.5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.5.1. 
See general directions for use.
 4.5.2. 
See general directions for use.
 4.5.3. 
See general directions for use.
 4.5.4. 
See general directions for use.
 4.5.5. 
See general directions for use.
 5.  5.1. 
Fill the reservoir with the RTU product and screw the dip cup on top.

The products must be brought to temperatures above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

To ensure sufficient contact time, care should be taken that the product is not removed after application. Leave the product on the teats and keep the animals standing for at least five minutes after treatment for post-milking disinfection.
 5.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
 5.3. 
General: Remove affected person from source of contamination.

After inhalation: Remove person to fresh air and keep comfortable for breathing. Get medical attention if any discomfort continues.

After skin contact: Rinse with water. Remove contaminated clothing and shoes. Seek medical advice if any skin reaction/or discomfort occurs.

After eye contact: Immediately rinse with water (at least 15 minutes). Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if any discomfort continues.

After ingestion: Contact poison treatment specialist immediately if symptoms occur and/or in case of mouth contact with large quantities. Do not give fluids or induce vomiting in case of impaired consciousness; place in recovery position and seek medical advice immediately.

If medical advice is needed, have product container or label at hand.

Prevent run-off from entering drains, sewers or waterways

Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air)

Dike to collect larger liquid spills

Contain and/or absorb spill with inert material, then place in closed and suitable container for disposal according to regulations

Do not place spilled materials back into the original container
 5.4. 
Method of disposal: Dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

Empty containers are rinsed with plenty of water and disposed to normal or commercial waste.

The paper towels used for the cleaning of teats are disposed in the normal rubbish.

Product classified as hazardous waste: No

Packaging classified as hazardous waste: No

EWC waste code: EWC: 0706 wastes from the MFSU of fats, grease, soaps, detergents, disinfectants and cosmetics

Other information: When handling waste, consideration should be made to the safety precautions applying to handling of the product. Waste code applies to product remnants in pure form.
 5.5. 
Mentioned in the SDS: Keep in original container. Store the product away from direct sunlight in opaque containers. Keep separate from food, feedstuffs, fertilisers and other sensitive material. Store above freezing.

Storage temperature: 0 – 30 °C

Shelf-life: 24 months.
 6. 
pH range of meta-SPC 5: 4-5
 7.  7.1. 

Trade name(s) Nova Dip Spray 3000IO Spray PlusPV-Plus 3000Tehotippi Soft PlusF 6 Robo V
Authorisation number EU-0019757-0005 1-5
Common name IUPAC name Function CAS number EC number Content (%)
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  1,46
Iodine  Active Substance 7553-56-2 231-442-4 0,307
 1.  1.1. 

Identifier meta-SPC 6
 1.2. 

Number 1-6
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  1,0 1,43
Iodine  Active Substance 7553-56-2 231-442-4 0,21 0,3
 2.2. 

Formulation(s) EW — Emulsion, oil in water
 3. 

Hazard statements Harmful to aquatic life with long lasting effects.Safety data sheet available on request.
Precautionary statements Keep out of reach of children.Avoid release to the environment.Dispose of contents in accordance with local/regional/national/international regulation.Dispose of container in accordance with local/regional/national/international regulation.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Manual dipping (RTU)Fill the reservoir with the RTU product and screw the dip cup on top.Clean the teats carefully by wiping with a single service paper towel/cloth immediately before milking.After milking, squeeze the reservoir and put the dip cup over each teat from below making sure that the full length of the teat is immersed into the disinfectant. Top up with fresh disinfectant by squeezing the reservoir as needed. After disinfection, empty the reservoir and clean reservoir and dip cup by rinsing with water.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.1.1. 
See general directions for use.
 4.1.2. 
See general directions for use.
 4.1.3. 
See general directions for use.
 4.1.4. 
See general directions for use.
 4.1.5. 
See general directions for use.
 4.2. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Manual spraying, trigger sprayer (RTU)Fill the reservoir with the RTU product and screw the top of the trigger sprayer on it.Clean carefully the teats by wiping with a single service paper towel/cloth before milking. After milking, spray the disinfectant on the teats using the trigger sprayer making sure that each teat is covered with the disinfectant. Top up the reservoir with fresh disinfectant as needed. After disinfection, empty the reservoir and clean reservoir and trigger sprayer by rinsing with water.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.2.1. 
See general directions for use.
 4.2.2. 
Wear protective chemical resistant gloves when applying the product by manual spraying (glove material to be specified by the authorisation holder within the product information).
 4.2.3. 
See general directions for use.
 4.2.4. 
See general directions for use.
 4.2.5. 
See general directions for use.
 4.3. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Manual spraying, electronic sprayer (RTU)Open a can containing the RTU product and insert the suction tube of the electronic sprayer.Clean carefully the teats by wiping with a single service paper towel/cloth before milking. After milking, spray the disinfectant on the teats using the electronic sprayer making sure that each teat is covered with the disinfectant. Replace the empty can by a new can as needed. After disinfection, put the suction tube system into a bucket of water and rinse the sprayer by pumping the water through the sprayer.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.3.1. 
See general directions for use.
 4.3.2. 
Wear protective chemical resistant gloves when applying the product by manual spraying (glove material to be specified by the authorisation holder within the product information).
 4.3.3. 
See general directions for use.
 4.3.4. 
See general directions for use.
 4.3.5. 
See general directions for use.
 4.4. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Automated dipping (RTU)Open a can containing the RTU product and insert the suction tube of the automated dipping-system.Before milking clean teats carefully by automatic procedure or manually.After milking, the vacuum is shut off and the teat dip is injected into a manifold on the claw piece. The teats are coated with 2-4 ml of dip when the teat cup is withdrawn by the Automatic Cluster Removal (ACR). After the removal of the ACR, every liner of the automated dipping-system is thoroughly rinsed with water and blown out with compressed air. In a final cleaning step after each milking session of the herd, the liners are disinfected (e.g. with a chlorine-based product) and blown out again with compressed air. Afterwards, the milking system is ready for the next milking event. The whole process is automated.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.4.1. 
See general directions for use.
 4.4.2. 
See general directions for use.
 4.4.3. 
See general directions for use.
 4.4.4. 
See general directions for use.
 4.4.5. 
See general directions for use.
 4.5. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeast
Field(s) of use IndoorDISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking.
Application method(s) Automated spraying by robot (RTU)Open a can containing the RTU product and insert the suction tube of the robotic milking device.The teats are cleaned by robot with automatic brushes. After robotic milking, 2-4 ml of the disinfectant is sprayed automatically onto teats from a cluster arm. Rinsing of the sprayer is automatic.
Application rate(s) and frequency Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment.Post-milking application 1-3 times per day (apply after every milking).
Category(ies) of users Professional
Pack sizes and packaging material Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 LPlastic drum, HDPE: 200 LIBC, HDPE: 1 000 LOpaque containers.
 4.5.1. 
See general directions for use.
 4.5.2. 
See general directions for use.
 4.5.3. 
See general directions for use.
 4.5.4. 
See general directions for use.
 4.5.5. 
See general directions for use.
 5.  5.1. 
Fill the reservoir with the RTU product and screw the dip cup on top.

The products must be brought to temperatures above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

To ensure sufficient contact time, care should be taken that the product is not removed after application. Leave the product on the teats and keep the animals standing for at least five minutes after treatment for post-milking disinfection.
 5.2. 
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
 5.3. 
General: Remove affected person from source of contamination.

After inhalation: Remove person to fresh air and keep comfortable for breathing. Get medical attention if any discomfort continues.

After skin contact: Rinse with water. Remove contaminated clothing and shoes. Seek medical advice if any skin reaction/or discomfort occurs.

After eye contact: Immediately rinse with water (at least 15 minutes). Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if any discomfort continues.

After ingestion: Contact poison treatment specialist immediately if symptoms occur and/or in case of mouth contact with large quantities. Do not give fluids or induce vomiting in case of impaired consciousness; place in recovery position and seek medical advice immediately.

If medical advice is needed, have product container or label at hand.

Prevent run-off from entering drains, sewers or waterways

Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air)

Dike to collect larger liquid spills

Contain and/or absorb spill with inert material, then place in closed and suitable container for disposal according to regulations

Do not place spilled materials back into the original container
 5.4. 
Method of disposal: Dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

Empty containers are rinsed with plenty of water and disposed to normal or commercial waste.

The paper towels used for the cleaning of teats are disposed in the normal rubbish.

Product classified as hazardous waste: No

Packaging classified as hazardous waste: No

EWC waste code: EWC: 0706 wastes from the MFSU of fats, grease, soaps, detergents, disinfectants and cosmetics

Other information: When handling waste, consideration should be made to the safety precautions applying to handling of the product. Waste code applies to product remnants in pure form.
 5.5. 
Mentioned in the SDS: Keep in original container. Store the product away from direct sunlight in opaque containers. Keep separate from food, feedstuffs, fertilisers and other sensitive material. Store above freezing.

Storage temperature: 0 – 30 °C

Shelf-life: 24 months.
 6. 
pH range of meta-SPC 6: 4-5
 7.  7.1. 

Trade name(s) Jopo WintersprayIO WintersprayJodopax RTUBarrera W
Authorisation number EU-0019757-0006 1-6
Common name IUPAC name Function CAS number EC number Content (%)
Polyvinylpyrrolidone iodine  Active Substance 25655-41-8  1,43
Iodine  Active Substance 7553-56-2 231-442-4 0,3
