
Article 1 
A Union authorisation with authorisation number EU-0020461-0000 is granted to CVAS Development GmbH for the making available on the market and use of the single biocidal product ‘CVAS Disinfectant product based on Propan-2-ol’, in accordance with the summary of the biocidal product characteristics set out in the Annex.
The Union authorisation is valid from 24 December 2019 until 30 November 2029.
Article 2 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 29 November 2019.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX
CVAS Disinfectant product based on Propan-2-ol
Product type 2 — Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Product type 4 — Food and feed area (Disinfectants)
Authorisation number: EU-0020461-0000
R4BP asset number: EU-0020461-0000

1.  1.1. 

Trade name(s) CVAS Disinfectant product based on Propan-2-olcalgonit DS 622R 3000 SCHNELLDESINFEKTIONIPADES 70Alpha SeptinBlu-SeptDisinfect homeSchnell DesDisinfect RapidBakt-Ex PurBakt-Ex RapidROTIE-DES quickBactazol IDezynfektatorEOSSAN-Desinfektionsspray-FluidFS-7-SprayGartengeräte Hygiene SprayNeudoClean Hygiene Spray
 1.2. 

Name and address of the authorisation holder Name CVAS Development GmbH
Address Dr Albert Reimann Str. 16a, 68526, Ladenburg, Germany
Authorisation number EU-0020461-0000
R4BP asset number EU-0020461-0000
Date of the authorisation 24 December 2019
Expiry date of the authorisation 30 November 2029
 1.3. 

Name of manufacturer Brenntag GmbH
Address of manufacturer Messeallee 11, 45131 Essen, Germany
Location of manufacturing sites Am Nordseekai 22, 73207 Plochingen Germany


Name of manufacturer Calvatis GmbH
Address of manufacturer Dr Albert Reimann Str. 16a, 68526 Ladenburg Germany
Location of manufacturing sites Dr Albert Reimann Str. 16a, 68526 Ladenburg Germany


Name of manufacturer Arthur Schopf Hygiene GmbH & Co. KG
Address of manufacturer Pfaffensteinstr. 1, 83115 Neubeuern Germany
Location of manufacturing sites Pfaffensteinstr. 1, 83115 Neubeuern Germany
 1.4. 

Active substance Propan-2-ol
Name of manufacturer Shell Nederland Raffinaderij B.V.
Address of manufacturer Vondelingenweg 601, 3196 KK, Vodelingenenplaat Rotterdam Netherlands
Location of manufacturing sites Vondelingenweg 601, 3196 KK, Vodelingenenplaat Rotterdam Netherlands


Active substance Propan-2-ol
Name of manufacturer ExxonMobil
Address of manufacturer 4999 Scenic Highway, LA 70897 Baton Rouge, Louisana United States
Location of manufacturing sites 4999 Scenic Highway, LA 70897 Baton Rouge, Louisana United States


Active substance Propan-2-ol
Name of manufacturer INEOS Solvents Germany GmbH
Address of manufacturer Römerstraße 733, 47443 Moers Germany
Location of manufacturing sites Römerstraße 733, 47443 Moers Germany

2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol  Active Substance 67-63-0 200-661-7 61,25
 2.2. 
Any other liquid (ready-to-use)

3. 

Hazard statements Highly flammable liquid and vapour.Causes serious eye irritation.May cause drowsiness or dizziness.Repeated exposure may cause skin dryness or cracking.
Precautionary statements If medical advice is needed, have product container or label at hand.Keep out of reach of children.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.Keep container tightly closed.Avoid breathing vapours.Use only outdoors or in a well-ventilated area.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Call a POISON CENTER if you feel unwell.If eye irritation persists: Get medical advice.Store in a well-ventilated place. Keep cool.Store locked up.Dispose of contents/container in accordance with local regulations.Wash hands thoroughly after handling.IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.IF INHALED: Remove person to fresh air and keep comfortable for breathing.In case of fire: Use alcohol-resistant foam to extinguish.

4.  4.1. 

Product type PT02 — Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorDisinfection of non-porous surfaces in domestic areas.
Application method(s) SprayingSpraying with trigger sprayer or pump spraySpraying and wipingSpraying with trigger sprayer or pump spray and wipingPouring and wiping
Application rate(s) and frequency 40-50 mL/m2
Category(ies) of users General public (non-professional)
Pack sizes and packaging material 
1.. Bottle: High-density polyethylene (HDPE), 250 - 1 000 mL
2.. Bottle with fine mist spray pump or trigger spray head: HDPE, 250 - 1 000 mL
 4.1.1. 
The authorisation holder has to specify the typical application rate in a simple, easily understandable form on the label:


• Trigger spray: Apply 20 spray strokes per 0,5 m2.
• Pump spray: Apply 3 jets per 100 cm2.
• Bottle: Apply one measuring cup per m2.
 4.1.2. 
See section 5.2.
 4.1.3. 
See section 5.3.
 4.1.4. 
See section 5.4.
 4.1.5. 
See section 5.5.
 4.2. 

Product type PT02 — Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorDisinfection of non-porous surfaces in industry, small enterprises, institutions and domestic areas.
Application method(s) SprayingSpraying with trigger sprayer or pump spraySpraying and wipingSpraying with trigger sprayer or pump spray and wipingPouring and wiping
Application rate(s) and frequency 40-50 mL/m2
Category(ies) of users Professional
Pack sizes and packaging material 
1.. Bottle: HDPE, 250 - 1 000 mL
2.. Bottle with fine mist spray pump or trigger spray head: HDPE, 250 - 1 000 mL
3.. Intermediate bulk containers (IBC): HDPE, 720 L
4.. Drum: Steel, zinc coated and painted, 200 - 220 L
5.. Canister: HDPE, 5 - 50 L
 4.2.1. 
See section 5.1.
 4.2.2. 

1.. The following personal risk mitigation measure can be considered for disinfection of food processing machinery and refilling procedure unless it can be replaced by technical and/or organisational measures: The use of eye protection during handling of the product is recommended.
2.. The product must only be applied for disinfection of small surfaces.
 4.2.3. 
See section 5.3.
 4.2.4. 
See section 5.4.
 4.2.5. 
See section 5.5.
 4.3. 

Product type PT04 — Food and feed area (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorDisinfection of non-porous surfaces in kitchens.Disinfection of gardening equipment for human hygiene purpose only.
Application method(s) SprayingSpraying with trigger sprayer or pump spraySpraying and wipingSpraying with trigger sprayer or pump spray and wipingPouring and wiping
Application rate(s) and frequency 40-50 mL/m2
Category(ies) of users General public (non-professional)
Pack sizes and packaging material 
1.. Bottle: HDPE, 250 - 1 000 mL
2.. Bottle with fine mist spray pump or trigger spray head: HDPE, 250 - 1 000 mL
 4.3.1. 

1.. For use at room temperature (20 ± 2 °C).
2.. The authorisation holder has to specify the typical application rate in a simple, easily understandable form on the label:

• Trigger spray: Apply 20 spray strokes per 0,5 m2.
• Pump spray: Apply 3 jets per 100 cm2.
• Bottle: Apply one measuring cup per m2
3.. Disinfection of gardening equipment for human hygiene purpose only.
4.. Disinfect gardening equipment only indoors.
 4.3.2. 
See section 5.2.
 4.3.3. 
See section 5.3.
 4.3.4. 
See section 5.4.
 4.3.5. 
See section 5.5.
 4.4. 

Product type PT04 — Food and feed area (Disinfectants)
Where relevant, an exact description of the authorised use -
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorDisinfection of non-porous surfaces in canteens or kitchens, food processing industry (including breweries).Disinfection of gardening equipment for human hygiene purpose only.
Application method(s) SprayingSpraying with trigger sprayer or pump spraySpraying and wipingSpraying with trigger sprayer or pump spray and wipingPouring and wiping
Application rate(s) and frequency 40-50 mL/m2
Category(ies) of users Professional
Pack sizes and packaging material 
1.. Bottle: HDPE, 250 - 1 000 mL
2.. Bottle with fine mist spray pump or trigger spray head: HDPE, 250 - 1 000 mL
3.. IBC: HDPE, 720 L
4.. Drum: Steel, zinc coated and painted, 200 - 220 L
5.. Canister: HDPE, 5 - 50 L
 4.4.1. 

1.. For use at room temperature (20 ± 2 °C).
2.. Disinfection of gardening equipment for human hygiene purpose only.
3.. Disinfect gardening equipment only indoors.
 4.4.2. 

1.. Provide adequate ventilation (industrial ventilation or keeping windows and doors open).
2.. The product must only be applied for disinfection of small surfaces.
3.. The following personal risk mitigation measure can be considered for disinfection of food processing machinery and refilling procedure unless it can be replaced by technical and/or organisational measures: The use of eye protection during handling of the product is recommended.
 4.4.3. 
See section 5.3.
 4.4.4. 
See section 5.4.
 4.4.5. 
See section 5.5.

5.  5.1. 

1.. Clean surfaces before use.
2.. Apply the product to the surface undiluted by spraying. Make sure to wet surfaces completely. Allow to take effect for at least 15 minutes.
3.. Apply the product to the surface undiluted by spraying/pouring the product and wiping of the surface afterwards. Make sure to wet surfaces completely. Allow to take effect for at least 5 minutes.
4.. Do not apply more than 50 mL/m2.
5.. Used wipes must be disposed in a closed container.
6.. For non-professional users only: Do not use more than 4 applications per day.
 5.2. 

1.. Keep out of reach of children and pets.
2.. Avoid contact with eyes.
3.. Do not apply in the presence of small children.
4.. Keep children and pets away from rooms, where disinfection is taking place. Provide adequate ventilation before children enter treated rooms.
5.. For refilling a funnel must be applied.
 5.3. 
First aid:


1.. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
2.. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
3.. Call a POISON CENTER or doctor/physician if you feel unwell.
4.. If eye irritation persists, get medical advice.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements.
 5.5. 
Store cool (not above 30 °C) and protect from frost.

Shelf-life: 24 months.

6. 
Please be aware of the European reference value of 129,28 mg/m3 for the active substance propan-2-ol (CAS No.: 67-63-0) which was used for the risk assessment for the product.
