
Article 1 
The substances specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, are authorised as feed additives in animal nutrition subject to the conditions laid down in the Annex.
Article 2 

1. The substances specified in the Annex and premixtures containing those substances, which are produced and labelled before 19 December 2019 in accordance with the rules applicable before 19 December 2019 may continue to be placed on the market and used until 19 June 2020.
2. Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 19 December 2021 in accordance with the rules applicable before 19 December 2019 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for cats and dogs.
Article 3 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 26 November 2019.
For the Commission
The President
Jean- Claude JUNCKER
ANNEX

Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
mg of active substance/kg of complete feedingstuff with a moisture content of 12 %
Category: Sensory additives. Functional group: Flavouring compounds
2b5169 - 12-Methyltridecanal Additive composition:12-MethyltridecanalCharacterisation of the active substance:12-MethyltridecanalProduced by chemical synthesisPurity: min. 97 %Chemical formula: C14H28OCAS number: 75853-49-5FLAVIS: 05.169Method of analysis:For the determination of12-methyltridecanalin the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. Cats and dogs - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixture, the storage conditions, the stability to heat treatment shall be indicated.
3.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,5 mg/kg’
4.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,5 mg/kg.
5.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 19.12.2029
2b5057 - Hexa-2(trans),4(trans)-dienal Additive composition:Hexa-2(trans),4(trans)-dienalCharacterisation of the active substance:Hexa-2(trans),4(trans)-dienalProduced by chemical synthesisPurity: min. 97 %Chemical formula: C6H8OCAS number: 142-83-6FLAVIS: 05.057Method of analysis:For the determination of hexa-2(trans),4(trans)-dienal in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. Cats and dogs - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixture, the storage conditions, the stability to heat treatment shall be indicated.
3.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1,5 mg/kg’
4.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 1,5 mg/kg.
5.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection safety glasses and gloves. 19.12.2029
2b5078 - Tridec-2-enal Additive composition:Tridec-2-enalCharacterisation of the active substance:Tridec-2-enalProduced by chemical synthesisPurity: min. 92 %Chemical formula: C13H24OCAS number: 7774-82-5FLAVIS: 05.078Method of analysis:For the determination of tridec-2-enal in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. Cats and dogs - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixture, the storage conditions, the stability to heat treatment shall be indicated.
3.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,5 mg/kg’
4.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,5 mg/kg.
5.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 19.12.2029
2b13084  2-Ethyl-4-hydroxy-5-methyl-3 (2H)-furanone Additive composition:2-Ethyl-4-hydroxy-5-methyl-3 (2H)-furanoneCharacterisation of the active substance:2-Ethyl-4-hydroxy-5-methyl-3 (2H)-furanoneProduced by chemical synthesisPurity: min. 97 %Chemical formula: C7H10O3CAS number: 27538-09-6FLAVIS: 13.084Method of analysis:For the determination of2-ethyl-4-hydroxy-5-methyl-3 (2H)-furanone in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. Cats and dogs    
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixture, the storage conditions, the stability to heat treatment shall be indicated.
3.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 2,25 mg/kg’
4.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 2,25 mg/kg.
5.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 19.12.2029
2b12005 - Phenylmethanethiol Additive composition:PhenylmethanethiolCharacterisation of the active substance:PhenylmethanethiolProduced by chemical synthesisPurity: min. 99 %Chemical formula: C7H8SCAS number: 100-53-8FLAVIS: 12.005Method of analysis:For the determination of phenylmethanethiol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. Cats and dogs - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixture, the storage conditions, the stability to heat treatment shall be indicated.
3.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’
4.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
5.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 19.12.2029
2b12077 - Benzyl methyl sulfide Additive composition:Benzyl methyl sulfideCharacterisation of the active substance:Benzyl methyl sulfideProduced by chemical synthesisPurity: min. 99 %Chemical formula: C8H10SCAS number: 766-92-7FLAVIS: 12.077Method of analysis:For the determination of benzyl methyl sulfide in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. Cats and dogs - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixture, the storage conditions, the stability to heat treatment shall be indicated.
3.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’
4.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
5.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 19.12.2029
2b4019 - 2,5-Dimethylphenol Additive composition:2,5-DimethylphenolCharacterisation of the active substance:2,5-DimethylphenolProduced by chemical synthesisPurity: min. 99 %Chemical formula: C8H10OCAS number: 95-87-4FLAVIS: 04.019Method of analysis:For the determination of2,5-dimethylphenol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. Cats and dogs - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixture, the storage conditions, the stability to heat treatment shall be indicated.
3.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg’
4.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 1 mg/kg.
5.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 19.12.2029
2b15096 - sec-Pentylthiophene Additive composition:sec-PentylthiopheneCharacterisation of the active substance:sec-PentylthiopheneProduced by chemical synthesisPurity: min. 98 %Chemical formula: C9H14SCAS number: 4861-58-9FLAVIS: 15.096Method of analysis:For the determination of sec--pentylthiophene in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. Cats and dogs - - - 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixture, the storage conditions, the stability to heat treatment shall be indicated.
3.. On the label of the additive the following shall be indicated:
‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,1 mg/kg’
4.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,1 mg/kg.
5.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 19.12.2029
