
Article 1 
A Union authorisation with authorisation number EU-0020540-0000 is granted to Applied Biocide GmbH for the making available on the market and use of the biocidal product family ‘BPF_Iodine_VET’, in accordance with the summary of the biocidal product characteristics set out in the Annex.
The Union authorisation is valid from 25 November 2019 until 31 October 2029.
Article 2 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 22 October 2019.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX
BPF_Iodine_VET
Product type 3 - Veterinary hygiene (Disinfectants)
Authorisation number: EU-0020540-0000
R4BP asset number: EU-0020540-0000

PART I
1.  1.1. 

Name BPF_Iodine_VET
 1.2. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 1.3. 

Name and address of the authorisation holder Name Applied Biocide GmbH
Address Sprl 31, Rue Jules Melotte, 4350, Remicourt, Belgium
Authorisation number EU-0020540-0000
R4BP asset number EU-0020540-0000
Date of the authorisation 25 November 2019
Expiry date of the authorisation 31 October 2029
 1.4. 

Name of manufacturer Ewabo Chemikalien GmbH & Co KG
Address of manufacturer Kolpingstrasse 4, 49835 Wietmarschen Germany
Location of manufacturing sites Kolpingstrasse 4, 49835 Wietmarschen Germany
Name of manufacturer FINK TEC GmbH
Address of manufacturer Oberster Kamp 23, 59069 Hamm Germany
Location of manufacturing sites Oberster Kamp 23, 59069 Hamm Germany
Name of manufacturer IRCASERVICE
Address of manufacturer S.S. Cremasca 591 no. 10, 24040 Fornovo S. Giovanni (BG) Italy
Location of manufacturing sites S.S. Cremasca 591 no. 10, 24040 Fornovo S. Giovanni (BG) Italy
Name of manufacturer Laboratorios Maymo SA
Address of manufacturer Via Augusta, 302, 08017 Barcelona Spain
Location of manufacturing sites Via Augusta, 302, 08017 Barcelona Spain
 1.5. 

Active substance Iodine
Name of manufacturer Cosayach S.A. Compania de Salitre y Yodo
Address of manufacturer Amunátegui 178, 7th Floor, 8320000 Santiago Chile
Location of manufacturing sites S.C.M. Cosayach Cala, 1180000 Pozo Almonte Chile Chile
Active substance Iodine
Name of manufacturer ACF Minera S.A.
Address of manufacturer San Martin 499, 1100000 Iquique Chile
Location of manufacturing sites Lagunas mine, 1180000 Pozo Almonte Chile
Active substance Iodine
Name of manufacturer Sociedad Quimica y Minera SA
Address of manufacturer Los Militares 4290, 7550000 Las Condes Chile
Location of manufacturing sites Nueva Victoria, 1180000 Pozo Almonte ChilePedro de Valdivia, 1240000 Antofagasta Chile

2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,1 3,0
Phosphoric Acid Trihydroxidooxidophosphorus phosphoric acid Non-active substance 7664-38-2 231-633-2 0,0 10,0
Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Non-active substance 69011-36-5 500-241-6 0,0 31,8
Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Non-active substance 68439-46-3 614-482-0 0,0 31,8
 2.2. 

Formulation(s) meta SPC 1-5: AL — any other liquidmeta SPC 6-8: SL — soluble concentrate

PART II 1.  1.1. 

Identifier Meta SPC 1
 1.2. 

Number 1-1
 1.3. 

Product type(s) PT03 - Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,15 0,15
Phosphoric Acid Trihydroxidooxidophosphorus phosphoric acid Non-active substance 7664-38-2 231-633-2 0,0 0,0
Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Non-active substance 69011-36-5 500-241-6 0,0 0,0
Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Non-active substance 68439-46-3 614-482-0 0,0 0,0
 2.2. 

Formulation(s) AL — any other liquid
 3. 

Hazard statements May be corrosive to metals.
Precautionary statements Keep only in original packaging.Absorb spillage to prevent material damage.Store in corrosive resistant container with a resistant inner liner.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use Indoor
Application method(s) Open system: spray treatmentSpraying: Manual and automated non-medical disinfection of teats with a ready-to-use spray (on cows, post-milking)
Application rate(s) and frequency Application rate: 10-15 ml per cowApplication frequency:During lactation period:
— manual: 2 applications per day (post-milking)
— automated: 3 applications per day (post-milking)During dry period: 1 application per day
Category(ies) of users Professional
Pack sizes and packaging material Bottle high-density polyethylene (HDPE): 1 liter, cap is made of PPJerry can HDPE: 5-60 litersDrum HDPE: 200 litersIBC HDPE: 600-1 000 liters
 4.1.1. 
---
 4.1.2. 
---
 4.1.3. 
---
 4.1.4. 
---
 4.1.5. 
---
 5.  5.1. 
Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

Immediately after each cow has been milked, spray the entire surface of each teat with the solution. Leave the product until next milking. Do not clean the teats directly after disinfection.

Keep the cows standing until the product has dried (at least 5 minutes).

Product can be applied manually or by means of automatic teat sprayer.

Before the next milking the teats have to be cleaned, preferably with one new wet cloth per cow.

Application frequency must not exceed two applications per cow and day considering manual spraying and must not exceed three applications per cow and day considering automatic teat sprayer (post-milking).
 5.2. 
Keep out of reach of children.

Wear protective chemical resistant gloves, coated coverall and boots during product handling and application phase (material to be specified by the authorisation holder in the product information).

In case a combination of pre- and post-milking disinfection is necessary, using another product not containing Iodine has to be considered for pre-milking disinfection.
 5.3. 
After inhalation: Supply fresh air; consult doctor in case of complaints.

After skin contact: Wash skin thoroughly.

After eye contact: Rinse opened eye, remove contact lenses, keep rinsing for several minutes under running water. Then consult a doctor.

After swallowing: Rinse out mouth and then drink some water. Do not induce vomiting; call for medical help immediately.

When asking for medical advice keep packaging or label at hand and call your local poison control center [insert local number here].

Environmental emergency measures:

Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). To prevent malfunctioning of an individual wastewater treatment plant, possible residues containing the product must be discharged to the manure storage (for spreading on agricultural soils or fermentation into biogas installation) or to the municipal sewer if legally allowed.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

European Waste Catalogue: 200130-detergents other than those mentioned in 20 01 29.
 5.5. 
Store the product at room temperature, away from direct sunlight and in opaque containers. Protect from frost. Keep container tightly closed.

Shelf-life: 12 months in HDPE.
 6.  7.  7.1. 

Trade name(s) FINK — Io Spray 15FINK — Euter-DIP PVP-SFINK Pattedyp PVPIOSpray 15 PVP
Authorisation number EU-0020540-0001 1-1


Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,15
 1.  1.1. 

Identifier Meta SPC 2
 1.2. 

Number 1-2
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,3 0,5
Phosphoric Acid Trihydroxidooxidophosphorus phosphoric acid Non-active substance 7664-38-2 231-633-2 0,0 0,0
Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Non-active substance 69011-36-5 500-241-6 0,0 0,0
Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Non-active substance 68439-46-3 614-482-0 0,0 0,0
 2.2. 

Formulation(s) AL — any other liquid
 3. 

Hazard statements May be corrosive to metals.Harmful to aquatic life with long lasting effects.
Precautionary statements Keep only in original packaging.Avoid release to the environment.Absorb spillage to prevent material damage.Store in corrosive resistant container with a resistant inner liner.Dispose of contents to/container in accordance with the local/national regulations.
 4.  4.1. 

Product-type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use Indoor
Application method(s) Open system: spray treatmentSpraying: Manual and automated non-medical disinfection of teats with a ready-to-use spray (on cows, post-milking)
Application rate(s) and frequency Application rate: 10-15 ml per cowApplication frequency:During lactation period:
— manual: 2 applications per day (post-milking)
— automated: 3 applications per day (post-milking)During dry period: 1 application per day
Category(ies) of users Professional
Pack sizes and packaging material Bottle HDPE: 1 liter, cap is made of PPJerry can HDPE: 5-60 litersDrum HDPE: 200 litersIBC HDPE: 600-1 000 liters
 4.1.1. 
--
 4.1.2. 
--
 4.1.3. 
--
 4.1.4. 
--
 4.1.5. 
--
 5.  5.1. 
Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

Immediately after each cow has been milked, spray the entire surface of each teat with the solution. Leave the product until next milking. Do not clean the teats directly after disinfection.

Keep the cows standing until the product has dried (at least 5 minutes).

Product can be applied manually or by means of automatic teat sprayer.

Before the next milking the teats have to be cleaned, preferably with one new wet cloth per cow.

Application frequency must not exceed two applications per cow and day considering manual spraying and must not exceed three applications per cow and day considering automatic teat sprayer (post-milking).
 5.2. 
Keep out of reach of children.

Wear protective chemical resistant gloves, coated coverall and boots during product handling and application phase (material to be specified by the authorisation holder in the product information).

In case a combination of pre- and post-milking disinfection is necessary, using another product not containing Iodine has to be considered for pre-milking disinfection.
 5.3. 
After inhalation: Supply fresh air; consult doctor in case of complaints.

After skin contact: Wash skin thoroughly.

After eye contact: Rinse opened eye, remove contact lenses, keep rinsing for several minutes under running water. Then consult a doctor.

After swallowing: Rinse out mouth and then drink some water. Do not induce vomiting; call for medical help immediately.

When asking for medical advice keep packaging or label at hand and call your local poison control center [insert local number here].

Environmental emergency measures:

Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). To prevent malfunctioning of an individual wastewater treatment plant, possible residues containing the product must be discharged to the manure storage (for spreading on agricultural soils or fermentation into biogas installation) or to the municipal sewer if legally allowed.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

European Waste Catalogue: 200130-detergents other than those mentioned in 20 01 29.
 5.5. 
Store the product at room temperature, away from direct sunlight and in opaque containers. Protect from frost. Keep container tightly closed.

Shelf-life: 12 months in HDPE.
 6.  7.  7.1. 

Trade name(s) Fink Io Spray - 30ST-Io SprayDESINTEC MH Iodine SDESINTEC MH Raidip plusIodine Spray 3000Iodine Spray
Authorisation number EU-0020540-0002 1-2


Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,3
 7.2. 

Trade name(s) Fink — Io Spray 50DESINTEC MH Raidip 5000Iodine Spray 5000
Authorisation number EU-0020540-0003 1-2


Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,5
 1.  1.1. 

Identifier Meta SPC 3
 1.2. 

Number 1-3
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,5 0,5
Phosphoric Acid Trihydroxidooxidophosphorus phosphoric acid Non-active substance 7664-38-2 231-633-2 0,0 0,0
Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Non-active substance 69011-36-5 500-241-6 0,0 0,0
Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Non-active substance 68439-46-3 614-482-0 0,0 0,0
 2.2. 

Formulation(s) AL — any other liquid
 3. 

Hazard statements May be corrosive to metals.Harmful to aquatic life with long lasting effects.
Precautionary statements Keep only in original packaging.Avoid release to the environment.Absorb spillage to prevent material damage.Store in corrosive resistant container with a resistant inner liner.Dispose of contents to/container in accordance with the local/national regulations.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use Indoor
Application method(s) Open system: spray treatmentSpraying: Manual and automated non-medical disinfection of teats with a ready-to-use spray (on cows, post-milking)
Application rate(s) and frequency Application rate: 10-15 ml per cowApplication frequency:During lactation period:
— manual: 2 applications per day (post-milking)
— automated: 3 applications per day (post-milking)During dry period: 1 application per day
Category(ies) of users Professional
Pack sizes and packaging material Bottle HDPE: 1 liter, cap is made of PPJerry can HDPE: 5-60 litersDrum HDPE: 200 litersIBC HDPE: 600-1 000 liters
 4.1.1. 
--
 4.1.2. 
---
 4.1.3. 
--
 4.1.4. 
---
 4.1.5. 
---
 5.  5.1. 
Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

Immediately after each cow has been milked, spray the entire surface of each teat with the solution. Leave the product until next milking. Do not clean the teats directly after disinfection.

Keep the cows standing until the product has dried (at least 5 minutes).

Product can be applied manually or by means of automatic teat sprayer.

Before the next milking the teats have to be cleaned, preferably with one new wet cloth per cow.

Application frequency must not exceed two applications per cow and day considering manual spraying and must not exceed three applications per cow and day considering automatic teat sprayer (post-milking).
 5.2. 
Keep out of reach of children.

Wear protective chemical resistant gloves, coated coverall and boots during product handling and application phase (material to be specified by the authorisation holder in the product information).

In case a combination of pre- and post-milking disinfection is necessary, using another product not containing Iodine has to be considered for pre-milking disinfection.
 5.3. 
After inhalation: Supply fresh air; consult doctor in case of complaints.

After skin contact: Wash skin thoroughly.

After eye contact: Rinse opened eye, remove contact lenses, keep rinsing for several minutes under running water. Then consult a doctor.

After swallowing: Rinse out mouth and then drink some water. Do not induce vomiting; call for medical help immediately.

When asking for medical advice keep packaging or label at hand and call your local poison control center [insert local number here].

Environmental emergency measures:

Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). To prevent malfunctioning of an individual wastewater treatment plant, possible residues containing the product must be discharged to the manure storage (for spreading on agricultural soils or fermentation into biogas installation) or to the municipal sewer if legally allowed.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

European Waste Catalogue: 200130-detergents other than those mentioned in 20 01 29.
 5.5. 
Store the product at room temperature, away from direct sunlight and in opaque containers. Protect from frost. Keep container tightly closed.

Shelf-life: 12 months in HDPE.
 6.  7.  7.1. 

Trade name(s) Fink — Io Spray 50 (Jodophor)Fink — Io Spray 50 (Iodophor)
Authorisation number EU-0020540-0004 1-3


Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,5
 1.  1.1. 

Identifier Meta SPC 4
 1.2. 

Number 1-4
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,1 0,15
Phosphoric Acid Trihydroxidooxidophosphorus phosphoric acid Non-active substance 7664-38-2 231-633-2 0,0 0,0
Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Non-active substance 69011-36-5 500-241-6 0,0 0,0
Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Non-active substance 68439-46-3 614-482-0 0,0 0,0
 2.2. 

Formulation(s) AL — any other liquid
 3. 

Hazard statements May be corrosive to metals.
Precautionary statements Keep only in original packaging.Absorb spillage to prevent material damage.Store in corrosive resistant container with a resistant inner liner.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use Indoor
Application method(s) Open system: dip treatmentTeat-dipping: Manual non-medical disinfection of teats with a ready-to-use liquid (on cows, post-milking)
Application rate(s) and frequency Application rate: 5-10 ml per cowApplication frequency:During lactation period: 2 applications per day (post-milking)During dry period: 1 application per day
Category(ies) of users Professional
Pack sizes and packaging material Bottle HDPE: 1 liter, cap is made of PPJerry can HDPE: 5-60 litersDrum HDPE: 200 litersIBC HDPE: 600-1 000 liters
 4.1.1. 
---
 4.1.2. 
---
 4.1.3. 
---
 4.1.4. 
---
 4.1.5. 
---
 5.  5.1. 
Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

Fill up a teat dipping cup with 2/3 of product. Immediately after each cow has been milked, dip each teat manually in the solution. Ensure that at least two thirds of the teats, preferably the entire teats, come in contact with the solution.

Do not clean the teats directly after disinfection. Leave the product until next milking. Keep the cows standing until the product has dried (at least 5 minutes).

Refill the cup as necessary.

Teat dipping cups should be emptied after milking and washed before re-use. Before the next milking the teats have to be cleaned, preferably with one new wet cloth per cow.

Application frequency must not exceed two applications per cow and day (post-milking).
 5.2. 
Keep out of reach of children.

In case a combination of pre- and post-milking disinfection is necessary, using another product not containing Iodine has to be considered for pre-milking disinfection.
 5.3. 
After inhalation: Supply fresh air; consult doctor in case of complaints.

After skin contact: Wash skin thoroughly.

After eye contact: Rinse opened eye, remove contact lenses, keep rinsing for several minutes under running water. Then consult a doctor.

After swallowing: Rinse out mouth and then drink some water. Do not induce vomiting; call for medical help immediately.

When asking for medical advice keep packaging or label at hand and call your local poison control center [insert local number here].

Environmental emergency measures:

Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). To prevent malfunctioning of an individual wastewater treatment plant, possible residues containing the product must be discharged to the manure storage (for spreading on agricultural soils or fermentation into biogas installation) or to the municipal sewer if legally allowed.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

European Waste Catalogue: 200130-detergents other than those mentioned in 20 01 29.
 5.5. 
Store the product at room temperature, away from direct sunlight and in opaque containers. Protect from frost. Keep container tightly closed.

Shelf-life: 12 months in HDPE.
 6.  7.  7.1. 

Trade name(s) FINK — Io Dip 10IODip 10 PVP
Authorisation number EU-0020540-0005 1-4


Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,1
 7.2. 

Trade name(s) FINK — Io Dip ProtectDESINTEC MH Iodine BarrierTvP — Barrier Dip
Authorisation number EU-0020540-0006 1-4


Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,15
 1.  1.1. 

Identifier Meta SPC 5
 1.2. 

Number 1-5
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 0,3 0,45
Phosphoric Acid Trihydroxidooxidophosphorus phosphoric acid Non-active substance 7664-38-2 231-633-2 0,35 0,4
Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Non-active substance 69011-36-5 500-241-6 0,0 0,0
Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Non-active substance 68439-46-3 614-482-0 0,0 0,0
 2.2. 

Formulation(s) AL — any other liquid
 3. 

Hazard statements May be corrosive to metals.Harmful to aquatic life with long lasting effects.
Precautionary statements Keep only in original packaging.Avoid release to the environment.Absorb spillage to prevent material damage.Store in corrosive resistant container with a resistant inner liner.Dispose of contents to / container in accordance with the local/national regulations.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use Indoor
Application method(s) Open system: dip treatmentTeat-dipping: Manual non-medical disinfection of teats with a ready-to-use liquid (on cows, post-milking)
Application rate(s) and frequency Application rate: 5-10 ml per cowApplication frequency:During lactation period: 2 applications per day (post-milking)During dry period: 1 application per day
Category(ies) of users Professional
Pack sizes and packaging material Bottle HDPE: 1 liter, cap is made of PPJerry can HDPE: 5-60 litersDrum HDPE: 200 litersIBC HDPE: 600-1 000 liters
 4.1.1. 
---
 4.1.2. 
---
 4.1.3. 
---
 4.1.4. 
---
 4.1.5. 
---
 5.  5.1. 
Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

Fill up a teat dipping cup with 2/3 of product. Immediately after each cow has been milked, dip each teat manually in the solution. Ensure that at least two thirds of the teats, preferably the entire teats, come in contact with the solution.

Do not clean the teats directly after disinfection. Leave the product until next milking.

Keep the cows standing until the product has dried (at least 5 minutes).

Refill the cup as necessary.

Teat dipping cups should be emptied after milking and washed before re-use. Before the next milking the teats have to be cleaned, preferably with one new wet cloth per cow.

Application frequency must not exceed two applications per cow and day (post-milking).
 5.2. 
Keep out of reach of children.

In case a combination of pre- and post-milking disinfection is necessary, using another product not containing Iodine has to be considered for pre-milking disinfection.
 5.3. 
After inhalation: Supply fresh air; consult doctor in case of complaints.

After skin contact: Wash skin thoroughly.

After eye contact: Rinse opened eye, remove contact lenses, keep rinsing for several minutes under running water. Then consult a doctor.

After swallowing: Rinse out mouth and then drink some water. Do not induce vomiting; call for medical help immediately.

When asking for medical advice keep packaging or label at hand and call your local poison control center [insert local number here].

Environmental emergency measures:

Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). To prevent malfunctioning of an individual wastewater treatment plant, possible residues containing the product must be discharged to the manure storage (for spreading on agricultural soils or fermentation into biogas installation) or to the municipal sewer if legally allowed.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

European Waste Catalogue: 200130-detergents other than those mentioned in 20 01 29.
 5.5. 
Store the product at room temperature, away from direct sunlight and in opaque containers. Protect from frost. Keep container tightly closed.

Shelf-life: 12 months in HDPE.
 6.  7.  7.1. 

Trade name(s) Jodofilm 75/5 4 500 ppm
Authorisation number EU-0020540-0007 1-5


Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,45
Phosphoric Acid Trihydroxidooxidophosphorus phosphoric acid Non-active substance 7664-38-2 231-633-2 0,4
 7.2. 

Trade name(s) Jodofilm 75/5 3 000 ppm
Authorisation number EU-0020540-0008 1-5


Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 0,3
Phosphoric Acid Trihydroxidooxidophosphorus phosphoric acid Non-active substance 7664-38-2 231-633-2 0,35
 1.  1.1. 

Identifier Meta SPC 6
 1.2. 

Number 1-6
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 1,75 2,4
Phosphoric Acid Trihydroxidooxidophosphorus phosphoric acid Non-active substance 7664-38-2 231-633-2 3,0 10,0
Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Non-active substance 69011-36-5 500-241-6 0,0 25,6
Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Non-active substance 68439-46-3 614-482-0 0,0 31,8
 2.2. 

Formulation(s) SL — soluble concentrate
 3. 

Hazard statements May be corrosive to metals.Harmful if swallowed.Causes severe skin burns and eye damage.Causes serious eye damage.May cause damage to thyroid gland through prolonged or repeated exposure.Harmful to aquatic life with long lasting effects.
Precautionary statements Keep only in original packaging.Do not breathe mist.Do not breathe spray.Avoid release to the environment.Wear protective gloves.Wear protective clothing.Wear face protection.IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.IF IN EYES: Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing.Absorb spillage to prevent material damage.Store locked up.Keep out of reach of children.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastsViruses
Field(s) of use Indoor
Application method(s) Open system: spray treatmentDisinfectant for hard surfaces in stables (excluding hatcheries). Spraying of diluted concentrate by means of a hand-held knapsack sprayer (4-7 bar)
Application rate(s) and frequency 100 ml/m2— Concentration of Iodine in application solution: 750 ppm (0,075 % w/w).Application frequency per year:Dairy cows: 1Beef cattle: 1Veal calves: 4Sows, in individual pens: 5Sows in groups: 5Fattening pigs: 3Laying hens in battery cages without treatment: 1Laying hens in battery cages with aeration (belt drying): 1Laying hens in battery cages with forced drying (deep pit, high rise): 1Laying hens in compact battery cages: 1Laying hens in free range with litter floor (partly litter floor, partly slatted): 1Broilers in free range with litter floor: 7Laying hens in free range with grating floor (aviery system): 1Parent broilers in free range with grating floor: 1Parent broilers in rearing with grating floor: 3Turkeys in free range with litter floor: 2Ducks in free range with litter floor: 13Geese in free range with litter floor: 6
Category(ies) of users Professional
Pack sizes and packaging material Bottle HDPE: 1 liter, cap is made of PPJerry can HDPE: 5-60 litersDrum HDPE: 200 litersIBC HDPE: 600-1 000 liters
 4.1.1. 
Iodosan 30: Mix 29 ml product with 971 ml water to obtain 1 l application solution.

Iodosan 18: Mix 40 ml product with 960 ml water to obtain 1 l application solution.
 4.1.2. 
---
 4.1.3. 
---
 4.1.4. 
---
 4.1.5. 
---
 5.  5.1. 
Always read the label or leaflet before use and follow all the instructions provided.

To prepare the disinfectant solution, mix the liquid product with water. Always pour in water first and then carefully stir in the product.

Use max. 100 ml application solution per m2 treated area. Do not prepare more fluid than strictly necessary.

The product shall only be applied in empty (unpopulated) animal houses after surfaces have been thoroughly cleaned with a suitable cleaner.

Pre-cleaning is mandatory. Rinse or wipe the surfaces which will be treated afterwards. Leave them to dry for about 24 up to 36 h before disinfection to obtain earth-moist surfaces. Soak installations and equipment thoroughly with a thin layer of the prepared solution by spraying, using suitable devices (4 to 7 bar). During the process and for the duration of contact time (min. 30 minutes), all openings have to be closed and the ventilation has to be switched off.
 5.2. 
Keep out of reach of children.

The form of the bottle of the product should minimise risk for splashes in order to prevent eye and skin exposure during diluting the product.

During the mixing and loading phase: The use of a face shield and protection gloves (glove material to be specified by the authorisation holder in the product information) is mandatory.

During the application phase of the in use dilution by spraying: Gloves and a protective coverall (at least type X, EN XXXXX) which is impermeable for the biocidal product shall be worn (glove and coverall material to be specified by the authorisation holder in the product information). Use new gloves for each work shift.

Professionals must not carry out animal house disinfection more than 3 times per month. These professionals should not use Iodine products for additional purposes.

Only use one kind of Iodine-containing product per day.

Stable disinfection should not be carried out more than once per year or once per lifetime for calf and pigs. Feeding troughs must be covered during application.
 5.3. 
After inhalation: Supply fresh air; consult doctor in case of complaints.

After skin contact: Immediately take off contaminated clothing and wash skin thoroughly.

After eye contact: Immediately rinse opened eye, remove contact lenses, keep rinsing for several minutes under running water. Then consult a doctor.

After swallowing: Rinse out mouth and then drink some water. Do not induce vomiting; call for medical help immediately.

In case of unconsciousness place patient stably in left side position for transportation. Never give anything by mouth to an unconscious individual

When asking for medical advice keep packaging or label at hand and call your local poison control center [insert local number here].

Environmental emergency measures:

Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). To prevent malfunctioning of an individual wastewater treatment plant, possible residues containing the product must be discharged to the manure storage (for spreading on agricultural soils or fermentation into biogas installation) or to the municipal sewer if legally allowed.

Methods and material for containment and cleaning up:

Stop leak if safe to do so. Absorb spillage with liquid-binding material (sand, earth, diatomite, acid binders, universal binders, sawdust) and place in container for disposal according to local / national regulations.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

European Waste Catalogue: 200130-detergents other than those mentioned in 20 01 29.
 5.5. 
Store the product away from direct sunlight and in opaque containers. Protect from frost. Keep container tightly closed.

Shelf-life: 24 months in HDPE
 6.  7.  7.1. 

Trade name(s) IODOSAN 30IODOSANIODATDESINTEC FL-JODESROTIE-SOL JDisinfect JodFINK — Jodophos 15Jod-Reiniger sauerTankrein extra
Authorisation number EU-0020540-0009 1-6


Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 2,4
Phosphoric Acid Trihydroxidooxidophosphorus phosphoric acid Non-active substance 7664-38-2 231-633-2 10,0
Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Non-active substance 69011-36-5 500-241-6 25,6
 7.2. 

Trade name(s) IODOSAN 18
Authorisation number EU-0020540-0010 1-6


Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 1,75
Phosphoric Acid Trihydroxidooxidophosphorus phosphoric acid Non-active substance 7664-38-2 231-633-2 3,0
Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Non-active substance 68439-46-3 614-482-0 31,8
 1.  1.1. 

Identifier Meta SPC 7
 1.2. 

Number 1-7
 1.3. 

Product type(s) PT03 — Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 3,0 3,0
Phosphoric Acid Trihydroxidooxidophosphorus phosphoric acid Non-active substance 7664-38-2 231-633-2 10,0 10,0
Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Non-active substance 69011-36-5 500-241-6 31,8 31,8
Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Non-active substance 68439-46-3 614-482-0 0,0 0,0
 2.2. 

Formulation(s) SL — soluble concentrate
 3. 

Hazard statements May be corrosive to metals.Harmful if swallowed.Causes severe skin burns and eye damage.Causes serious eye damage.May cause damage to thyroid gland through prolonged or repeated exposure.Toxic to aquatic life with long lasting effects.
Precautionary statements Keep only in original packaging.Do not breathe mist.Do not breathe spray.Avoid release to the environment.Wear protective gloves.Wear protective clothing.Wear face protection.IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Absorb spillage to prevent material damage.Store locked up.Keep out of reach of children.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastsViruses
Field(s) of use Indoor
Application method(s) Open system: spray treatmentDisinfectant for hard surfaces in stables (excluding hatcheries). Spraying of diluted concentrate by means of a hand-held knapsack sprayer (4-7 bar)
Application rate(s) and frequency 100 ml/m2 - Concentration of Iodine in application solution: 750 ppm (0,075 % w/w).Application frequency per year:Dairy cows: 1Beef cattle: 1Veal calves: 4Sows, in individual pens: 5Sows in groups: 5Fattening pigs: 3Laying hens in battery cages without treatment: 1Laying hens in battery cages with aeration (belt drying): 1Laying hens in battery cages with forced drying (deep pit, high rise): 1Laying hens in compact battery cages: 1Laying hens in free range with litter floor (partly litter floor, partly slatted): 1Broilers in free range with litter floor: 7Laying hens in free range with grating floor (aviery system): 1Parent broilers in free range with grating floor: 1Parent broilers in rearing with grating floor: 3Turkeys in free range with litter floor: 2Ducks in free range with litter floor: 13Geese in free range with litter floor: 6
Category(ies) of users Professional
Pack sizes and packaging material Bottle HDPE: 1 liter, cap is made of PPJerry can HDPE: 5-60 litersDrum HDPE: 200 litersIBC HDPE: 600-1 000 liters
 4.1.1. 
Iodosan 30 plus: Mix 23 ml product with 977 ml water to obtain 1 l application solution.
 4.1.2. 
---
 4.1.3. 
---
 4.1.4. 
---
 4.1.5. 
---
 5.  5.1. 
Always read the label or leaflet before use and follow all the instructions provided.

To prepare the disinfectant solution, mix the liquid product with water. Always pour in water first and then carefully stir in the product.

Use max. 100 ml application solution per m2 treated area. Do not prepare more fluid than strictly necessary.

The product shall only be applied in empty (unpopulated) animal houses after surfaces have been thoroughly cleaned with a suitable cleaner.

Pre-cleaning is mandatory. Rinse or wipe the surfaces which will be treated afterwards. Leave them to dry for about 24 up to 36 h before disinfection to obtain earth-moist surfaces. Soak installations and equipment thoroughly with a thin layer of the prepared solution by spraying, using suitable devices (4 to 7 bar). During the process and for the duration of contact time (min. 30 minutes), all openings have to be closed and the ventilation has to be switched off.
 5.2. 
Keep out of reach of children.

The form of the bottle of the product should minimise risk for splashes in order to prevent eye and skin exposure during diluting the product.

During the mixing and loading phase: The use of a face shield and protection gloves (glove material to be specified by the authorisation holder in the product information) is mandatory.

During the application phase of the in use dilution by spraying: Gloves and a protective coverall (at least type X, EN XXXXX) which is impermeable for the biocidal product shall be worn (glove and coverall material to be specified by the authorisation holder in the product information). Use new gloves for each work shift.

Professionals must not carry out animal house disinfection more than 3 times per month. These professionals should not use Iodine products for additional purposes.

Only use one kind of Iodine-containing product per day.

Stable disinfection should not be carried out more than once per year or once per lifetime for calf and pigs. Feeding troughs must be covered during application.
 5.3. 
After inhalation: Supply fresh air; consult doctor in case of complaints.

After skin contact: Immediately take off contaminated clothing and wash skin thoroughly.

After eye contact: Immediately rinse opened eye, remove contact lenses, keep rinsing for several minutes under running water. Then consult a doctor.

After swallowing: Rinse out mouth and then drink some water. Do not induce vomiting; call for medical help immediately.

In case of unconsciousness place patient stably in left side position for transportation. Never give anything by mouth to an unconscious individual.

When asking for medical advice keep packaging or label at hand and call your local poison control center [insert local number here].

Environmental emergency measures:

Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). To prevent malfunctioning of an individual wastewater treatment plant, possible residues containing the product must be discharged to the manure storage (for spreading on agricultural soils or fermentation into biogas installation) or to the municipal sewer if legally allowed.

Methods and material for containment and cleaning up:

Stop leak if safe to do so. Absorb spillage with liquid-binding material (sand, earth, diatomite, acid binders, universal binders, sawdust) and place in container for disposal according to local / national regulations.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

European Waste Catalogue: 200130-detergents other than those mentioned in 20 01 29.
 5.5. 
Store the product away from direct sunlight and in opaque containers. Protect from frost. Keep container tightly closed.

Shelf-life: 24 months in HDPE
 6.  7.  7.1. 

Trade name(s) IODOSAN 30 PlusYODO CONTROLYODIVEN
Authorisation number EU-0020540-0011 1-7


Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 3,0
Phosphoric Acid Trihydroxidooxidophosphorus phosphoric acid Non-active substance 7664-38-2 231-633-2 10,0
Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Non-active substance 69011-36-5 500-241-6 31,8
 1.  1.1. 

Identifier Meta SPC 8
 1.2. 

Number 1-8
 1.3. 

Product type(s) PT03 - Veterinary hygiene (Disinfectants)
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active Substance 7553-56-2 231-442-4 1,5 1,5
Phosphoric Acid Trihydroxidooxidophosphorus phosphoric acid Non-active substance 7664-38-2 231-633-2 3,0 3,0
Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Non-active substance 69011-36-5 500-241-6 18,0 18,0
Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Isotridecanol, ethoxylated 90 %, C 9-11 Alcohol Ethoxylate Non-active substance 68439-46-3 614-482-0 0,0 0,0
 2.2. 

Formulation(s) SL - soluble concentrate
 3. 

Hazard statements May be corrosive to metals.Causes severe skin burns and eye damage.Causes serious eye damage.May cause damage to thyroid gland through prolonged or repeated exposure.Harmful to aquatic life with long lasting effects.
Precautionary statements Keep only in original packaging.Do not breathe mist.Do not breathe spray.Avoid release to the environment.Wear protective gloves.Wear protective clothing.Wear face protection.IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Absorb spillage to prevent material damage.Store locked up.Keep out of reach of children.
 4.  4.1. 

Product type PT03 — Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastsViruses
Field(s) of use Indoor
Application method(s) Open system: spray treatmentDisinfectant for hard surfaces in stables (excluding hatcheries). Spraying of diluted concentrate by means of a hand-held knapsack sprayer (4-7 bar)
Application rate(s) and frequency 100 ml/m2— Concentration of Iodine in application solution: 750 ppm (0,075 % w/w).Application frequency per year:Dairy cows: 1Beef cattle: 1Veal calves: 4Sows, in individual pens: 5Sows in groups: 5Fattening pigs: 3Laying hens in battery cages without treatment: 1Laying hens in battery cages with aeration (belt drying): 1Laying hens in battery cages with forced drying (deep pit, high rise): 1Laying hens in compact battery cages: 1Laying hens in free range with litter floor (partly litter floor, partly slatted): 1Broilers in free range with litter floor: 7Laying hens in free range with grating floor (aviery system): 1Parent broilers in free range with grating floor: 1Parent broilers in rearing with grating floor: 3Turkeys in free range with litter floor: 2Ducks in free range with litter floor: 13Geese in free range with litter floor: 6
Category(ies) of users Professional
Pack sizes and packaging material Bottle HDPE: 1 liter, cap is made of PPJerry can HDPE: 5-60 litersDrum HDPE: 200 litersIBC HDPE: 600-1 000 liters
 4.1.1. 
Iodosan 15: Mix 46 ml product with 954 ml water to obtain 1 l application solution.
 4.1.2. 
---
 4.1.3. 
---
 4.1.4. 
---
 4.1.5. 
---
 5.  5.1. 
Always read the label or leaflet before use and follow all the instructions provided.

To prepare the disinfectant solution, mix the liquid product with water. Always pour in water first and then carefully stir in the product.

Use max. 100 ml application solution per m2 treated area. Do not prepare more fluid than strictly necessary.

The product shall only be applied in empty (unpopulated) animal houses after surfaces have been thoroughly cleaned with a suitable cleaner.

Pre-cleaning is mandatory. Rinse or wipe the surfaces which will be treated afterwards. Leave them to dry for about 24 up to 36 h before disinfection to obtain earth-moist surfaces. Soak installations and equipment thoroughly with a thin layer of the prepared solution by spraying, using suitable devices (4 to 7 bar). During the process and for the duration of contact time (min. 30 minutes), all openings have to be closed and the ventilation has to be switched off.
 5.2. 
Keep out of reach of children.

The form of the bottle of the product should minimise risk for splashes in order to prevent eye and skin exposure during diluting the product.

During the mixing and loading phase: The use of a face shield and protection gloves (glove material to be specified by the authorisation holder in the product information) is mandatory.

During the application phase of the in use dilution by spraying: Gloves and a protective coverall (at least type X, EN XXXXX) which is impermeable for the biocidal product shall be worn (glove and coverall material to be specified by the authorisation holder in the product information). Use new gloves for each work shift.

Professionals must not carry out animal house disinfection more than 3 times per month. These professionals should not use Iodine products for additional purposes.

Only use one kind of Iodine-containing product per day.

Stable disinfection should not be carried out more than once per year or once per lifetime for calf and pigs. Feeding troughs must be covered during application.
 5.3. 
After inhalation: Supply fresh air; consult doctor in case of complaints.

After skin contact: Immediately take off contaminated clothing and wash skin thoroughly.

After eye contact: Immediately rinse opened eye, remove contact lenses, keep rinsing for several minutes under running water. Then consult a doctor.

After swallowing: Rinse out mouth and then drink some water. Do not induce vomiting; call for medical help immediately.

In case of unconsciousness place patient stably in left side position for transportation. Never give anything by mouth to an unconscious individual.

When asking for medical advice keep packaging or label at hand and call your local poison control center [insert local number here].

Environmental emergency measures:

Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). To prevent malfunctioning of an individual wastewater treatment plant, possible residues containing the product must be discharged to the manure storage (for spreading on agricultural soils or fermentation into biogas installation) or to the municipal sewer if legally allowed.

Methods and material for containment and cleaning up:

Stop leak if safe to do so. Absorb spillage with liquid-binding material (sand, earth, diatomite, acid binders, universal binders, sawdust) and place in container for disposal according to local / national regulations.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

European Waste Catalogue: 200130-detergents other than those mentioned in 20 01 29.
 5.5. 
Store the product away from direct sunlight and in opaque containers. Protect from frost. Keep container tightly closed.

Shelf-life: 24 months in HDPE.
 6.  7.  7.1. 

Trade name(s) IODOSAN 15
Authorisation number EU-0020540-0012 1-8


Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active Substance 7553-56-2 231-442-4 1,5
Phosphoric Acid Trihydroxidooxidophosphorus phosphoric acid Non-active substance 7664-38-2 231-633-2 3,0
Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Poly(oxy-1,2-ethanediyl).alpha.-tridecyl-.omega.-hydroxy-,branched Non-active substance 69011-36-5 500-241-6 18,0
