
Article 1 
The references of harmonised standards for machinery drafted in support of Directive 2006/42/EC listed in Annex I to this Decision are hereby published in the Official Journal of the European Union.
The references of harmonised standards drafted in support of Directive 2006/42/EC listed in Annex II to this Decision are hereby published in the Official Journal of the European Union with a restriction.
Article 2 
The references of harmonised standards for machinery drafted in support of Directive 2006/42/EC listed in Annex III to this Decision are hereby withdrawn from the Official Journal of the European Union as from the dates set out in that Annex.
Article 3 
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
Done at Brussels, 18 March 2019.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX I

No Reference of the standard Type
1. EN ISO 14118:2018Safety of machinery — Prevention of unexpected start-up (ISO 14118:2017) B
2. EN 1853:2017Agricultural machinery — Trailers – Safety C
3. EN 1870-6:2017Safety of woodworking machines — Circular sawing machines — Part 6: Circular sawing machines for fire wood C
4. EN ISO 4254-5:2018Agricultural machinery — Safety — Part 5: Power-driven soil-working machines (ISO 4254-5:2018) C
5. EN ISO 4254-7:2017Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017) C
6. EN ISO 4254-8:2018Agricultural machinery — Safety — Part 8: Solid fertilizer distributors (ISO 4254-8:2018) C
7. EN ISO 5395-1:2013Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests (ISO 5395-1:2013)EN ISO 5395-1:2013/A1:2018 C
8. EN ISO 5395-3:2013Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)EN ISO 5395-3:2013/A1:2017EN ISO 5395-3:2013/A2:2018 C
9. EN 12013:2018Plastics and rubber machines — Internal mixers — Safety requirements C
10. EN 12999:2011+A2:2018Cranes — Loader cranes C
11. EN 13001-3-1:2012+A2:2018Cranes — General Design — Part 3-1: Limit States and proof competence of steel structure C
12. EN 13001-3-6:2018Cranes — General design — Part 3-6: Limit states and proof of competence of machinery — Hydraulic cylinders C
13. EN 13135:2013+A1:2018Cranes — Safety — Design — Requirements for equipment C
14. EN 13684:2018Garden equipment — Pedestrian controlled lawn aerators and scarifiers – Safety C
15. EN ISO 13766-2:2018Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018) C
16. EN 15194:2017Cycles — Electrically power assisted cycles — EPAC Bicycles C
17. EN 15895:2011+A1:2018Cartridge operated hand-held tools — Safety requirements — Fixing and hard marking tools C
18. EN ISO 16092-1:2018Machine tools safety — Presses — Part 1: General safety requirements (ISO 16092-1:2017) C
19. EN ISO 16092-3:2018Machine tools safety — Presses — Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017) C
20. EN 16719:2018Transport platforms C
21. EN 16952:2018Agricultural machinery — Rough-terrain Work Platforms for Orchard's operations (WPO) – Safety C
22. EN 17059:2018Plating and anodizing lines — Safety requirements C
23. EN ISO 19085-4:2018Woodworking machines — Safety — Part 4: Vertical panel circular sawing machines (ISO 19085-4:2018) C
24. EN ISO 19085-6:2017Woodworking machines — Safety — Part 6: Single spindle vertical moulding machines (‘toupies’) (ISO 19085-6:2017) C
25. EN ISO 19085-8:2018Woodworking machines — Safety — Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017) C
26. EN ISO 19225:2017Underground mining machines — Mobile extracting machines at the face — Safety requirements for shearer loaders and plough systems (ISO 19225:2017) C
27. EN ISO 28927-2:2009Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)EN ISO 28927-2:2009/A1:2017 C
28. EN ISO/IEC 80079-38:2016Explosive atmospheres — Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)EN ISO/IEC 80079-38:2016/A1:2018 C
29. EN 50569:2013Household and similar electrical appliances — Safety — Particular requirements for commercial electric spin extractorsEN 50569:2013/A1:2018 C
30. EN 50570:2013Household and similar electrical appliances — Safety — Particular requirements for commercial electric tumble dryersEN 50570:2013/A1:2018 C
31. EN 50571:2013Household and similar electrical appliances — Safety — Particular requirements for commercial electric washing machinesEN 50571:2013/A1:2018 C
32. EN 50636-2-107:2015Safety of household and similar appliances — Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (IEC 60335-2-107:2012 Modified)EN 50636-2-107:2015/A1:2018 C
33. EN 60335-1:2012Household and similar electrical appliances — Safety — Part 1: General requirements (IEC 60335-1:2010 Modified)EN 60335-1:2012/A11:2014EN 60335-1:2012/A13:2017 C
34. EN 60335-2-58:2005Household and similar electrical appliances — Safety — Part 2-58: Particular requirements for commercial electric dishwashing machines (IEC 60335-2-58:2002 Modified)EN 60335-2-58:2005/A2:2015EN 60335-2-58:2005/A12:2016 C
35. EN 62841-2-1:2018Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-1: Particular requirements for hand-held drills and impact drills (IEC 62841-2-1:2017 Modified) C
36. EN 62841-2-17:2017Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-17: Particular requirements for hand-held routers (IEC 62841-2-17:2017 Modified) C
37. EN 62841-3-1:2014Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)EN 62841-3-1:2014/A11:2017 C
38. EN 62841-3-4:2016Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016 Modified)EN 62841-3-4:2016/A11:2017 C
39. EN 62841-3-6:2014Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified)EN 62841-3-6:2014/A11:2017 C
40. EN 62841-3-9:2015Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2014 Modified)EN 62841-3-9:2015/A11:2017 C
41. EN 62841-3-10:2015Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-10: Particular requirements for transportable cut-off machines (IEC 62841-3-10:2015 Modified)EN 62841-3-10:2015/A11:2017 C
42. EN 62841-3-14:2017Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-14: Particular requirements for transportable drain cleaners (IEC 62841-3-14:2017 Modified) C
ANNEX II

No Reference of the standard Type
1. EN 474-1:2006+A5:2018Earth-moving machinery — Safety — Part 1: General requirementsNotice: This publication does not concern clause 5.8.1 Visibility — Operator's field of view of this standard, but only in relation with EN 474-5:2006+A3:2013 requirements for hydraulic excavators, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC. C
2. EN 13241:2003+A2:2016Industrial, commercial, garage doors and gates — Product standard, performance characteristicsNotice: With regard to paragraphs 4.2.2, 4.2.6, 4.3.2, 4.3.3, 4.3.4, 4.3.6, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.3.7 and 1.4.3 of Annex I to Directive 2006/42/EC. C
ANNEX III

No Reference of the standard Date of withdrawal Type
1. EN 1037:1995+A1:2008Safety of machinery — Prevention of unexpected start-up 19.3.2019 B
2. EN 474-1:2006+A4:2013Earth-moving machinery — Safety — Part 1: General requirementsNotice: This publication does not concern clause 5.8.1 Visibility — Operator's field of view of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC. 19.3.2019 C
3. EN 1853:1999+A1:2009Agricultural machinery — Trailers with tipping body – Safety 19.3.2019 C
4. EN 1870-6:2002+A1:2009Safety of woodworking machines — Circular sawing machines — Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading 19.3.2019 C
5. EN ISO 4254-5:2009Agricultural machinery — Safety — Part 5: Power-driven soil-working machines (ISO 4254-5:2008) 19.3.2019 C
6. EN ISO 4254-7:2009Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008) 19.3.2019 C
7. EN 14017:2005+A2:2009Agricultural and forestry machinery — Solid fertilizer distributors – Safety 19.3.2019 C
8. EN ISO 5395-1:2013Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests (ISO 5395-1:2013) 19.3.2019 C
9. EN ISO 5395-3:2013Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)EN ISO 5395-3:2013/A1:2017 19.3.2019 C
10. EN 12013:2000+A1:2008Plastics and rubber machines — Internal mixers — Safety requirements 19.3.2019 C
11. EN 12999:2011+A1:2012Cranes — Loader cranes 19.3.2019 C
12. EN 13001-3-1:2012+A1:2013Cranes — General Design — Part 3-1: Limit States and proof competence of steel structure 19.3.2019 C
13. EN 13135:2013Cranes — Safety — Design — Requirements for equipment 19.3.2019 C
14. EN 13684:2004+A3:2009Garden equipment — Pedestrian controlled lawn aerators and scarifiers – Safety 19.3.2019 C
15. EN 15895:2011Cartridge operated hand-held tools — Safety requirements — Fixing and hard marking tools 19.3.2019 C
16. EN 692:2005+A1:2009Machine tools — Mechanical presses — Safety 19.3.2019 C
17. EN 693:2001+A2:2011Machine tools — Safety — Hydraulic presse 19.3.2019 C
18. EN 13736:2003+A1:2009Safety of machine tools — Pneumatic presses 19.3.2019 C
19. EN 848-1:2007+A2:2012Safety of woodworking machines — One side moulding machines with rotating tool — Part 1: Single spindle vertical moulding machines 19.3.2019 C
20. EN 1710:2005+A1:2008Equipment and components intended for use in potentially explosive atmospheres in underground mines 19.3.2019 C
21. EN 50569:2013Household and similar electrical appliances — Safety — Particular requirements for commercial electric spin extractors 12.1.2021 C
22. EN 50570:2013Household and similar electrical appliances — Safety — Particular requirements for commercial electric tumble dryers 12.1.2021 C
23. EN 50571:2013Household and similar electrical appliances — Safety — Particular requirements for commercial electric washing machines 12.1.2021 C
24. EN 50636-2-107:2015Safety of household and similar appliances — Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (IEC 60335-2-107:2012 Modified) 12.1.2020 C
25. EN 60335-1:2012Household and similar electrical appliances — Safety — Part 1: General requirements (IEC 60335-1:2010 Modified)EN 60335-1:2012/A11:2014 3.5.2020 C
26. EN 60745-2-1:2010Hand-held motor-operated electric tools — Safety — Part 2-1: Particular requirements for drills and impact drills (IEC 60745-2-1:2003 Modified + A1:2008) 19.3.2019 C
27. EN 60745-2-17:2010Hand-held motor-operated electric tools — Safety — Part 2-17: Particular requirements for routers and trimmers (IEC 60745-2-17:2010 Modified) 19.3.2019 C
28. EN 62841-3-1:2014Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) 19.10.2019 C
29. EN 61029-2-4:2011Safety of transportable motor-operated electric tools — Part 2-4: Particular requirements for bench grinders (IEC 61029-2-4:1993 Modified + A1:2001 Modified) 19.3.2019 C
30. EN 62841-3-6:2014Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) 19.10.2019 C
31. EN 62841-3-9:2015Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2014 Modified) 15.11.2019 C
32. EN 62841-3-10:2015Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-10: Particular requirements for transportable cut-off machines (IEC 62841-3-10:2015 Modified) 19.10.2019 C
33. EN 13241:2003+A2:2016Industrial, commercial, garage doors and gates — Product standard, performance characteristics 19.3.2019 C
34. EN 786:1996+A2:2009Garden equipment — Electrically powered walk- behind and hand-held lawn trimmers and lawn edge trimmers — Mechanical safety 19.3.2019 C
35. EN 1870-14:2007+A2:2012Safety of woodworking machines — Circular sawing machines — Part 14: Vertical panel sawing machines 19.3.2019 C
36. EN 61496-1:2013Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests 19.3.2019 C
37. EN ISO 11200:2014Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions 19.3.2019 B