
Article 1 
The substances specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.
Article 2 

1. The substances specified in the Annex and premixtures containing those substances, which are produced and labelled before 15 September 2018 in accordance with the rules applicable before 15 March 2018 may continue to be placed on the market and used until the existing stocks are exhausted.
2. Feed materials and compound feed containing the substances as specified in the Annex which are produced and labelled before 15 March 2019 in accordance with the rules applicable before 15 March 2018 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.
3. Feed materials and compound containing the substances as specified in the Annex which are produced and labelled before 15 March 2020 in accordance with the rules applicable before 15 March 2018 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.
Article 3 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 15 February 2018.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX

Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
mg of active substance/kg of complete feedingstuff with a moisture content of 12 %
Category: Sensory additives. Functional group: Flavouring compounds
2b02056 — Hex-3(cis)-en-1-ol 
Hex-3(cis)-en-1-ol

Hex-3(cis)-en-1-ol

Produced by chemical synthesis

Purity: min. 98 % assay as sum of (Z)- and (E)-isomers; min. 92 % of (Z)-isomer

Chemical formula: C6H12O

CAS number: 928-96-1

FLAVIS No: 02.056

For the determination of hex-3(cis)-en-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'

5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b02093 — Non-6-en-1-ol 
Non-6-en-1-ol

Non-6-en-1-ol

Produced by chemical synthesis

Purity: min. 98 % assay

Chemical formula: C9H18O

CAS number: 35854-86-5

FLAVIS No: 02.093

For the determination of non-6-en-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. The recommended maximum content of the active substance shall be 1 mg/kg of complete feedingstuff with a moisture content of 12 %.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg.'

5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 1 mg/kg.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b02094 — Oct-3-en-1-ol 
Oct-3-en-1-ol

Oct-3-en-1-ol

Produced by chemical synthesis

Purity: min. 96 % assay, as (Z)- isomer.

Chemical formula: C8H16O

CAS number: 20125-84-2

FLAVIS No: 02.094

For the determination oct-3-en-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. The recommended maximum content of the active substance shall be 1 mg/kg of complete feedingstuff with a moisture content of 12 %.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg.'

5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 1 mg/kg.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b05059 — Non-6(cis)-enal 
Non-6(cis)-enal

Non-6(cis)-enal

Produced by chemical synthesis

Purity: min. 96 % assay; secondary component 6–9 % trans-6-nonenal

Chemical formula: C9H16O

CAS number: 2277-19-2

FLAVIS No: 05.059

For the determination non-6(cis)-enal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'

5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b05075 — Hex-3(cis)-enal 
Hex-3(cis)-enal

Hex-3(cis)-enal

Produced by chemical synthesis

Purity: min. 97 % assay

Chemical formula: C6H10O

CAS number: 6789-80-6

FLAVIS No: 05.075

For the determination of hex-3(cis)-enal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'

5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b05085 — Hept-4-enal 
Hept-4-enal

Hept-4-enal

Produced by chemical synthesis

Purity: min. 98 % as sum of (Z)- and (E)-isomers; min. 93 % of (Z)-isomer; secondary component: 2-5 % (E)- isomer.

Chemical formula: C7H12O

CAS number: 6728-31-0

FLAVIS No: 05.085

For the determination of hept-4-enal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'

5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b09197 — Hex-3(cis)-enyl acetate 
Hex-3(cis)-enyl acetate

Hex-3(cis)-enyl acetate

Produced by chemical synthesis

Purity: min. 98 % assay as sum of (Z)- and (E)-isomers; min. 92 % of (Z)-isomer

Chemical formula: C8H14O2

CAS number: 3681-71-8

FLAVIS No: 09.197

For the determination of hex-3(cis)-enyl acetate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'

5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b09240 — Hex-3(cis)-enyl formate 
Hex-3(cis)-enyl formate

Hex-3(cis)-enyl formate

Produced by chemical synthesis

Purity: min. 95 % assay

Chemical formula: C7H12O2

CAS number: 33467-73-1

FLAVIS No: 09.240

For the determination of hex-3(cis)-enyl formate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'

5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b09270 — Hex-3-enyl butyrate 
Hex-3-enyl butyrate

Hex-3-enyl butyrate

Produced by chemical synthesis

Purity: min. 95 % assay

Chemical formula: C10H18O2

CAS number: 16491-36-4

FLAVIS No: 09.270

For the determination of hex-3-enyl butyrate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'

5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b09271 — Hex-3-enyl hexanoate 
Hex-3-enyl hexanoate

Hex-3-enyl hexanoate

Produced by chemical synthesis

Purity: min. 96 % assay

Chemical formula: C12H22O2

CAS number: 31501-11-8

FLAVIS No: 09.271

For the determination of hex-3-enyl hexanoate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'

5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b09563 — Hex-3(cis)-enyl isobutyrate 
Hex-3(cis)-enyl isobutyrate

Hex-3(cis)-enyl isobutyrate

Produced by chemical synthesis

Purity: min. 98 % assay

Chemical formula: C10H18O2

CAS number: 41519-23-7

FLAVIS No: 09.563

For the determination of hex-3(cis)-enyl isobutyrate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'

5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b02011 — Citronellol 
Citronellol

Citronellol

Produced by chemical synthesis

Purity: min. 90 % assay; racemate; other constituents: diunsaturated and saturated C10 alcohols, citronellyl acetate and citronellal

Chemical formula: C10H20O

CAS number: 106-22-9

FLAVIS No: 02.011

For the determination of citronellol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 1 mg/kg for cats
— 5 mg/kg for other species and categories'.

5. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b02229 — (-)-3,7-Dimethyl-6-octen-1-ol 
(-)-3,7-Dimethyl-6-octen-1-ol

(-)-3,7-Dimethyl-6-octen-1-ol

Produced by chemical synthesis or derived by fractional distillation of essential oils and saponification of extracts

Purity: min. 90 % assay

Chemical formula: C10H20O

CAS number: 7540-51-4

FLAVIS No: 02.229

For the determination of (-)-3,7-dimethyl-6-octen-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 1 mg/kg for cats
— 5 mg/kg for other species and categories'.

5. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b05021 — Citronellal 
Citronellal

Citronellal

Produced by chemical synthesis

Purity: min. 85 % assay.

Chemical formula: C10H18O

CAS number: 106-23-0

FLAVIS No: 05.021

For the determination of citronellal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 1 mg/kg for cats
— 5 mg/kg for other species and categories'

5. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b05074 — 2,6-Dimethylhept-5-enal 
2,6-Dimethylhept-5-enal

2,6-Dimethylhept-5-enal

Produced by chemical synthesis

Purity: min. 85 % assay

Chemical formula: C9H16O

CAS number: 106-72-9

FLAVIS No: 05.074

For the determination of 2,6-dimethylhept-5-enal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 1 mg/kg for cats
— 5 mg/kg for other species and categories'.

5. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b08036 — Citronellic acid 
Citronellic acid

Citronellic acid

Produced by chemical synthesis

Purity: min. 90 % assay

Chemical formula: C10H18O2

CAS number: 502-47-6

FLAVIS No: 08.036

For the determination of citronellic acid in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 1 mg/kg for cats
— 5 mg/kg for other species and categories'.

5. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b09012 — Citronellyl acetate 
Citronellyl acetate

Citronellyl acetate

Produced by chemical synthesis

Purity: min. 92 % assay

Chemical formula: C11H22O2

CAS number: 150-84-5

FLAVIS No: 09.012

For the determination of citronellyl acetate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 1 mg/kg for cats
— 5 mg/kg for other species and categories'.

5. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b09049 — Citronellyl butyrate 
Citronellyl butyrate

Citronellyl butyrate

Produced by chemical synthesis

Purity: min. 90 % assay

Chemical formula: C14H26O2

CAS number: 141-16-2

FLAVIS No: 09.049

For the determination of citronellyl butyrate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 1 mg/kg for cats
— 5 mg/kg for other species and categories'.

5. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b09078 — Citronellyl formate 
Citronellyl formate

Citronellyl formate

Produced by chemical synthesis

Purity: min. 90 % assay.

Chemical formula: C11H20O2

CAS number: 105-85-1

FLAVIS No: 09.078

For the determination of citronellyl formate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 1 mg/kg for cats
— 5 mg/kg for other species and categories'.

5. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b09129 — Citronellyl propionate 
Citronellyl propionate

Citronellyl propionate

Produced by chemical synthesis

Purity: min. 95 % assay

Chemical formula: C13H24O2

CAS number: 141-14-0

FLAVIS No: 09.129

For the determination of citronellyl propionate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 1 mg/kg for cats
— 5 mg/kg for other species and categories'.

5. 

— 1 mg/kg for cats
— 5 mg/kg for other species and categories.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b06081 — 1-Ethoxy-1-(3-hexenyloxy)ethane 
1-Ethoxy-1-(3-hexenyloxy)ethane

1-Ethoxy-1-(3-hexenyloxy)ethane

Produced by chemical synthesis

Purity: min. 97 % assay

Chemical formula: C10H20O2

CAS number: 28069-74-1

FLAVIS No: 06.081

For the determination of 1-ethoxy-1-(3-hexenyloxy)ethane in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. The recommended maximum content of the active substance shall be 1 mg/kg of complete feedingstuff with a moisture content of 12 %.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg.'

5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 1 mg/kg.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
2b09505 — Hex-3-enyl isovalerate 
Hex-3-enyl isovalerate

Hex-3-enyl isovalerate

Produced by chemical synthesis

Purity: min. 95 % assay

Chemical formula: C11H20O2

CAS number: 10032-11-8

FLAVIS No: 09.505

For the determination of hex-3-enyl isovalerate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1. The additive shall be incorporated into the feed in the form of a premixture.

2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3. The recommended maximum content of the active substance shall be 1 mg/kg of complete feedingstuff with a moisture content of 12 %.

4. 
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg.'

5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds: 1 mg/kg.

6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.
 15.3.2028
