
Article 1 
A Union authorisation is granted to Hypred SAS for the biocidal product family Hypred's iodine based products with authorisation number EU-0018397-0000.
The Union authorisation is valid from 11 October 2018 until 30 September 2028.
The Union authorisation is subject to compliance with the SPC set out in the Annex.
Article 2 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 20 September 2018.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX
HYPRED's iodine based products
Product type 3 — Veterinary hygiene (Disinfectants)
Authorisation number: EU-0018397-0000
R4BP asset number: EU-0018397-0000

PART I
1.  1.1. 

Name HYPRED's iodine based products
 
 1.2. 

Product type(s) PT03 - Veterinary hygiene (Disinfectants)
 
 1.3. 

Name and address of the authorisation holder Name Hypred SAS
Address 55, Boulevard Jules Verger - BP10180 35803 DINARD Cedex France
Authorisation number EU-0018397-0000
R4BP asset number EU-0018397-0000
Date of the authorisation 11 October 2018
Expiry date of the authorisation 30 September 2028
 1.4. 

Name of manufacturer HYPRED SAS
Address of manufacturer 55, Boulevard Jules Verger - BP10180 35803 DINARD France
Location of manufacturing sites HYPRED SAS - 55, Boulevard Jules Verger - BP10180 35803 DINARD FranceHYPRED POLSKA SP. Z O.O. NIEPRUSZEWO, KASZTANOWA 4 64320 Buk PolandHYPRED IBERICA S.L Pol. Ind. Arazuri-Orcoyen C/C no 32 31160 Orcoyen – NAVARRA SpainHYPRED GmbH Marie-Curie-Straße 23 53332 Bornheim – Sechtem GermanyHYPRED Italia s.r.l. Strada Montodine-Gombito Loc. Cà Nova 26010 Ripalta Arpina CR Italy
 1.5. 

Active substance Iodine
Name of manufacturer COSAYACH: SCM Cía. Cosayach Minera Negreiros, Rut. N°96.625.710-5
Address of manufacturer Terrenos de Elena S/N Terrenos de Elena S/N Huara, Región de Tarapacá Chile
Location of manufacturing sites Mined at: S.C.M. Cía. Minera Negreiros, S.C.M. Cosayach Soledad.Refined at: S.C.M. Cía. Minera Negreiros. Pozo Almonte Chile


Active substance Iodine
Name of manufacturer ACF MINERA SA
Address of manufacturer San Martín 499 Iquique Chile
Location of manufacturing sites Faena Lagunas KM. 1.722 Ruta A-5, Pozo Almonte Chile


Active substance Iodine
Name of manufacturer SOCIEDAD QUIMICA y MINERA SA
Address of manufacturer Los Militares 4290 SANTIAGO DE CHILE Chile
Location of manufacturing sites Pedro de Valdivia (PV) Route B 180 Antofagasta ChileNueva Victoria (NV) Route 5 North, Km 1925 Pozo Almonte Chile

2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active substance 7553-56-2 231-442-4 0,25 2,5
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy Non active substance 68439-50-9  2,697 24,199
 2.2. 

Formulation(s) AL - Any other liquidSL - Soluble concentrate
 

PART II 1.  1.1. 

Identifier meta SPC 1: Dipping products - ready to use
 1.2. 

Number 1-1
 1.3. 

Product type(s) PT03 - Veterinary hygiene (Disinfectants)
 
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active substance 7553-56-2 231-442-4 0,25 0,49
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy Non active substance 68439-50-9  2,697 4,993
 2.2. 

Formulation AL - Any other liquid
 
 3. 

Hazard statements Causes serious eye irritation.Harmful to aquatic life with long lasting effects.
Precautionary statements Keep out of reach of children.Wash hands thoroughly after handling.Wear protective gloves.Wear protective clothing.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice/attention.
 4.  4.1. 

Product Type PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastsAlgae
Field(s) of use IndoorDisinfection of teats of milk producing animals by dipping after milking
Application method(s) Dipping -Manual or automated disinfection of teats by dipping after milking.Dipping cup or automated dipping machine.
Application rate(s) and frequency 
— cows and buffaloes (3 to 10 ml: 5 ml recommended)
— sheep (1,5 to 5 ml: 1,5 ml recommended)
— goats (2,5 to 6 ml: 2,5 ml recommended)Frequency: 2 to 3 times per day
Category(ies) of users Professional
Pack sizes and packaging material HDPE JERRYCAN 5, 10, 22 LHDPE DRUM 60, 120, 220 LHDPE CONTAINER 1 000 L
 4.1.1. 
See general directions for use of meta SPC 1
 4.1.2. 
See general directions for use of meta SPC 1
 4.1.3. 
See general directions for use of meta SPC 1
 4.1.4. 
None: See general directions for use of meta SPC 1
 4.1.5. 
See general directions for use of meta SPC 1
 5.  5.1. 
Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

Fill the dipping cup manually or automatically with the ready to use product.

Apply by dipping manually or automatically on animal's teats on the full length of the teat after milking.


— cows and buffaloes (3 to 10 ml: 5 ml recommended)
— sheep (1,5 to 5 ml: 1,5 ml recommended)
— goats (2,5 to 6 ml: 2,5 ml recommended)

Leave the product until next milking. Keep the cows standing until the product has dried (at least 5 minutes).

At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster.

Where necessary, repeat the application after each milking.

Clean the application equipment regularly with warm water.
 5.2. 
Wear eye protection.

In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.
 5.3. 
Take the contaminated clothes and shoes off immediately. Wash them before wearing them again.

FIRST AID INSTRUCTIONS


— In the event of inhalation: Bring to fresh air.
— In the event of contact with the skin: Wash with water.
— In the event of contact with the eyes:
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
— In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice.

Refer to the safety data sheet available for professional user: it contains an emergency phone number.

Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste.
 5.5. 
Shelf life: 2 years in HDPE

Do not store at a temperature higher than 30 °C.
 6.  7.  7.1. 

Trade name(s) Dip-io 2500JOD DIPIODERM PSPDERMINO FRIododipIODEX EXTRAIodystrongDERMIODEINO IODE EPAISINO STAR +IODACTIV 2500IODIUM BX2500Usual Iod PostASiRAL Dip CoatIODOCAN EXTRAUDDER PLUSPRIMADIODECERTIODE EPAISIODIPACK GELHELIO IODE EPAISVAGELGELAPIS ACTIVIOSAPIS GELZENCARE FLASHREPROGELDERMADINE +KRONI Jod Dipp 2500WÜBBELMANN JOD DIPIodine Cleaner&SanitizerMUNGIFILMZEP FS FILMIODINE NIPPLE NP
Authorisation number EU-0018397-0001 1-1
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active substance 7553-56-2 231-442-4 0,25
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy Non active substance 68439-50-9  2,697
 7.2. 

Trade name(s) Dip-io YB MAXINO Io Dip MAXJOD DIP YB MAXIodoDip YB MAXIodium Dip YB MAXJodyDip YB MAXDelta IoDip YB MAX
Authorisation number EU-0018397-0002 1-1
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active substance 7553-56-2 231-442-4 0,49
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy Non active substance 68439-50-9  4,993
 1.  1.1. 

Identifier meta SPC 2: Dipping, foaming, spraying products - Ready to use
 1.2. 

Number 1-2
 1.3. 

Product type(s) PT03 - Veterinary hygiene (Disinfectants)
 
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active substance 7553-56-2 231-442-4 0,25 0,49
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy Non active substance 68439-50-9  2,697 4,69
 2.2. 

Formulation AL - Any other liquid
 
 3. 

Hazard statements Causes serious eye irritation.Harmful to aquatic life with long lasting effects.
Precautionary statements Keep out of reach of children.Wash hands thoroughly after handling.Wear protective gloves.Wear protective clothing.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice/attention.
 4.  4.1. 

Product Type PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorDisinfection of teats of milk producing animals by dipping, foaming or spraying before milking
Application method(s) Dipping, foaming or spraying before milking -Manual or automated disinfection of teats by dipping, foaming or spraying before milkingDipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine
Application rate(s) and frequency 
— cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended)
— sheep (1,5 to 5 ml: 1,5 to 3 ml recommended)
— goats (2,5 to 6 ml: 2,5 to 4 ml recommended)Frequency: 2 to 3 times per day
Category(ies) of users Professional
Pack sizes and packaging material HDPE JERRYCAN 5, 10, 22 LHDPE DRUM 60, 120, 220 LHDPE CONTAINER 1 000 L
 4.1.1. 
Eliminate all visible dirt before applying the product.

Manual or automatic dipping/foaming/spraying on animal's teats on the full length of the teat before milking.

Let the product act at least one minute.

Use the teat cleaning and wiping method systematically before attaching the milking cluster.

See also general instructions for use of meta SPC 2.
 4.1.2. 
For manual dipping/foaming application: Wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information)/eye protection.

For manual spraying applications wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information)/protective clothing/eye protection.

In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for post-milking disinfection.
 4.1.3. 
See general directions for use of meta SPC 2
 4.1.4. 
See general directions for use of meta SPC 2
 4.1.5. 
See general directions for use of meta SPC 2
 4.2. 

Product Type PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastsAlgae
Field(s) of use IndoorDisinfection of teats of milk producing animals by dipping, foaming or spraying after milking
Application method(s) Dipping, foaming, spraying after milking -Manual or automated disinfection of teats by dipping, foaming or spraying after milkingDipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine
Application rate(s) and frequency 
— cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended)
— sheep (1,5 to 5 ml: 1,5 to 3 ml recommended)
— goats (2,5 to 6 ml: 2,5 to 4 ml recommended)Frequency: 2 to 3 times per day
Category(ies) of users Professional
Pack sizes and packaging material HDPE JERRYCAN 5, 10, 22 LHDPE DRUM 60, 120, 220 LHDPE CONTAINER 1 000 L
 4.2.1. 
Manual or automatic dipping/foaming/spraying on animal's teats on the full length of the teat after milking.

Leave the product until next milking. Keep the cows standing until the product has dried (at least 5 minutes).

At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster.

See also general instructions for use of meta SPC 2.
 4.2.2. 
For manual spraying applications wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information)/protective clothing/eye protection.

In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.
 4.2.3. 
See general directions for use of meta SPC 2
 4.2.4. 
See general directions for use of meta SPC 2
 4.2.5. 
See general directions for use of meta SPC 2
 5.  5.1. 
See use-specific instructions for each use.

Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended. Fill the dipping/foaming cup/sprayer manually or automatically with the ready to use product.

Where necessary repeat the application at each milking

Clean the application equipment regularly with warm water.
 5.2. 
See use-specific risk mitigation measures for each use.
 5.3. 
Take the contaminated clothes and shoes off immediately. Wash them before wearing them again.

FIRST AID INSTRUCTIONS


— In the event of inhalation: Bring to fresh air.
— In the event of contact with the skin: Wash with water.
— In the event of contact with the eyes:
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
— In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice.

Refer to the safety data sheet available for professional user: it contains an emergency phone number.

Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste.
 5.5. 
Shelf life: 2 years in HDPE

Do not store at a temperature higher than 30 °C.
 6.  7.  7.1. 

Trade name(s) Liq-io 2500JOD SPRAYIODINE 3000 RTUIODEX 2500Usual Iod LiquidIodoliquidIodosprayDESINTEATIODYSPRAYRBT 2500IODY'FLASHINO IODE SPRAYIODYPRO 2500IODYPRO BL2500Robot Liq-io 25ADF iDip+ASiRAL Dip Spray JIODIPACKHELIO IODE LIQUIDEPOLY-IODECERTIODE LIQUIDEIOSAPIS FLUIDGELAPIS ROBOTZENCARE SPRAYHELIO IODE SPRAY +IODIP +KRONI Jod Spray 2500WÜBBELMANN JOD LIQUID
Authorisation number EU-0018397-0003 1-2
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active substance 7553-56-2 231-442-4 0,25
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy Non active substance 68439-50-9  2,697
 7.2. 

Trade name(s) Liq-io YB MAXINO Io Liquid MaxIodoliquid YB MAXIodospray YB MAXDesinteat YB MAXIodium Spray YB MAXJodySpray YB MAXDelta IoSpray YB MAX
Authorisation number EU-0018397-0004 1-2
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active substance 7553-56-2 231-442-4 0,49
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy Non active substance 68439-50-9  4,69
 1.  1.1. 

Identifier meta SPC 3: Dipping, foaming, spraying concentrated products
 1.2. 

Number 1-3
 1.3. 

Product type(s) PT03 - Veterinary hygiene (Disinfectants)
 
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active substance 7553-56-2 231-442-4 2,5 2,5
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy Non active substance 68439-50-9  24,199 24,199
 2.2. 

Formulation SL - Soluble concentrate
 
 3. 

Hazard statements Causes serious eye damage.May cause damage to organs (thyroid) through prolonged or repeated exposure oral.Toxic to aquatic life with long lasting effects.May be corrosive to metals.
Precautionary statements Keep out of reach of children.Do not breathe mist.Do not breathe vapours.Do not breathe spray.Wash hands thoroughly after handling.Wear protective gloves.Wear protective clothing.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Immediately call a poison center/doctor.Get medical advice/attention if you feel unwell.Dispose of contents to in accordance with local/regional/national/international regulations. Dispose of container to in accordance with local/regional/national/international regulations.Keep only in original container.Absorb spillage to prevent material damage.
 4.  4.1. 

Product Type PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorDisinfection of teats of milk producing animals by dipping, foaming or spraying before milking
Application method(s) Dipping, foaming, spraying -Manual or automated disinfection of teats by dipping, foaming or spraying before milking.Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine
Application rate(s) and frequency A dilution at 10 % (v/v) should be preparedApplication rate for the diluted product:
— cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended)
— sheep (1,5 to 5 ml: 1,5 to 3 ml recommended)
— goats (2,5 to 6 ml: 2,5 to 4 ml recommended)Frequency: 2 to 3 times per day
Category(ies) of users Professional
Pack sizes and packaging material HDPE JERRYCAN 5, 10, 22 LHDPE DRUM 60, 120, 220 LHDPE CONTAINER 1 000 L
 4.1.1. 
Prepare a dilution at 10 % (v/v: 10 ml product, add water up to 100 ml) for bactericidal and yeasticidal activity.

Fill the dipping/foaming cup/sprayer manually or automatically with the prepared dilution.

Eliminate all visible dirt before applying the product.

Manual or automatic dipping/foaming/spraying on animal's teats on the full length of the teat before milking.

Let the product act at least one minute.

Use the teat cleaning and wiping method systematically before attaching the milking cluster.

See also general directions for use of meta SPC 3.
 4.1.2. 
For manual spraying applications wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information)/protective clothing/eye protection.

In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for post-milking disinfection.
 4.1.3. 
See general directions for use of meta SPC 3
 4.1.4. 
See general directions for use of meta SPC 3
 4.1.5. 
See general directions for use of meta SPC 3
 4.2. 

Product Type PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastsAlgaeViruses
Field(s) of use IndoorDisinfection of teats of milk producing animals by dipping, foaming or spraying after milking
Application method(s) Dipping, foaming, spraying -Manual or automated disinfection of teats by dipping, foaming or spraying after milking.Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine
Application rate(s) and frequency For disinfection of bacteria, yeasts and algae a dilution at 10 % (v/v: 10 ml product, add water up to 100 ml) should be prepared.For disinfection of viruses a dilution at 20 % (v/v: 20 ml product, add water up to 100 ml) should be preparedApplication rate for the diluted product:
— cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended)
— sheep (1,5 to 5 ml: 1,5 to 3 ml recommended)
— goats (2,5 to 6 ml: 2,5 to 4 ml recommended)Frequency: 2 to 3 times per day
Category(ies) of users Professional
Pack sizes and packaging material HDPE JERRYCAN 5, 10, 22 LHDPE DRUM 60, 120, 220 LHDPE CONTAINER 1 000 L
 4.2.1. 
Prepare a dilution at 10 % (v/v: 10 ml product, add water up to 100 ml) for bactericidal, yeasticidal and algaecidal activity or 20 % (v/v: 20 ml product, add water up to 100 ml) in case virucidal activity is also needed.

Fill the dipping/foaming cup/sprayer manually or automatically with the prepared dilution.

Manual or automatic dipping/foaming/spraying on animal's teats on the full length of the teat after milking.

Leave the product until next milking. Keep the cows standing until the product has dried (at least 5 minutes).

At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster.

See also general directions for use of meta SPC 3.
 4.2.2. 
For manual spraying applications wear chemical resistant gloves (glove material to be specified by the authorisation holder within the product information)/protective clothing/eye protection.

In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.
 4.2.3. 
See general directions for use of meta SPC 3
 4.2.4. 
See general directions for use of meta SPC 3
 4.2.5. 
See general directions for use of meta SPC 3
 5.  5.1. 
See use-specific instructions for each use.

Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended. Fill the dipping/foaming cup/sprayer manually or automatically with the prepared dilution.

Where necessary, repeat the application at each milking

Clean the application equipment regularly with warm water.
 5.2. 
See use-specific risk mitigation measures for each use.
 5.3. 
Take the contaminated clothes and shoes off immediately. Wash them before wearing them again.

In case of faintness, get medical advice/attention. Show this safety data sheet to the doctor.

FIRST AID INSTRUCTIONS


— In the event of inhalation: Bring to fresh air.
— In the event of contact with the skin: Wash with water.
— In the event of contact with the eyes: Rinse at once with a soft stream of water for at least 15 minutes, eyes wide open.
Remove contact lenses if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/physician.
— In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice.

Refer to the safety data sheet available for professional user: it contains an emergency phone number.

Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste.
 5.5. 
Shelf life: 2 years in HDPE

Do not store at a temperature higher than 30 °C.
 6.  7.  7.1. 

Trade name(s) Liq-io concentrateINO Jod KonzentratUsual Iod ConcentIodoconcentratD 10 IODINED 5 IODINELiq-io CINO IODE CD 4 IODINEADF iDip+ concentrateMammizan Concentré
Authorisation number EU-0018397-0005 1-3
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active substance 7553-56-2 231-442-4 2,5
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy Non active substance 68439-50-9  24,199
 1.  1.1. 

Identifier meta SPC 4: Dipping products reaching virucidal activity – Ready to use
 1.2. 

Number 1-4
 1.3. 

Product type(s) PT03 - Veterinary hygiene (Disinfectants)
 
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active substance 7553-56-2 231-442-4 0,5 0,5
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy Non active substance 68439-50-9  4,993 4,993
 2.2. 

Formulation AL - Any other liquid
 
 3. 

Hazard statements Causes serious eye irritation.Harmful to aquatic life with long lasting effects.
Precautionary statements Keep out of reach of children.Wash hands thoroughly after handling.Wear protective gloves.Wear protective clothing.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice/attention.
 4.  4.1. 

Product Type PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastsAlgaeViruses
Field(s) of use IndoorDisinfection of teats of milk producing animals by dipping after milking
Application method(s) Dipping -Manual or automated disinfection of teats by dipping after milking.Dipping cup or automated dipping machine.
Application rate(s) and frequency 
— cows and buffaloes (3 to 10 ml: 5 ml recommended)
— sheep (1,5 to 5 ml: 1,5 ml recommended)
— goats (2,5 to 6 ml: 2,5 ml recommended)Frequency: 2 to 3 times per day
Category(ies) of users Professional
Pack sizes and packaging material HDPE JERRYCAN 5, 10, 22 LHDPE DRUM 60, 120, 220 LHDPE CONTAINER 1 000 L
 4.1.1. 
See general directions for use of meta SPC 4
 4.1.2. 
See general directions for use of meta SPC 4
 4.1.3. 
See general directions for use of meta SPC 4
 4.1.4. 
See general directions for use of meta SPC 4
 4.1.5. 
See general directions for use of meta SPC 4
 5.  5.1. 
Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended. Fill the dipping cup manually or automatically with the ready to use product.

Apply by dipping manually or automatically on animal's teats on the full length of the teat after milking.


— cows and buffaloes (3 to 10 ml: 5 ml recommended)
— sheep (1,5 to 5 ml: 1,5 ml recommended)
— goats (2,5 to 6 ml: 2,5 ml recommended)

Leave the product until next milking. Keep the cows standing until the product has dried (at least 5 minutes).

At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster.

Where necessary, repeat the application after each milking.

Clean the application equipment regularly with warm water.
 5.2. 
Wear eye protection.

In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.
 5.3. 
Take the contaminated clothes and shoes off immediately. Wash them before wearing them again.

FIRST AID INSTRUCTIONS


— In the event of inhalation: Bring to fresh air.
— In the event of contact with the skin: Wash with water.
— In the event of contact with the eyes:
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
— In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice.

Refer to the safety data sheet available for professional user: it contains an emergency phone number.

Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste.
 5.5. 
Shelf life: 2 years in HDPE

Do not store at a temperature higher than 30 °C.
 6.  7.  7.1. 

Trade name(s) Dip-io 5000IODIUM TXINO JOD 50 DIPUsual Iod Post +IODIUM PRO DIPIODERM PSP +IODEX EXTRA +Iododip +IODYSTRONG PLUSINO TREMPINO STARIODACTIV 5000DERMINOIODERM 5000IODIUM BX5000HOEVE-PLUS DIPTREMPASEPT IODEDERMADINEMAMMO-DERMKRONI Jod Dipp 5000
Authorisation number EU-0018397-0006 1-4
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active substance 7553-56-2 231-442-4 0,5
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy Non active substance 68439-50-9  4,993
 1.  1.1. 

Identifier meta SPC 5: Dipping, foaming, spraying products 5 500 ppm – Ready to use
 1.2. 

Number 1-5
 1.3. 

Product type(s) PT03 - Veterinary hygiene (Disinfectants)
 
 2.  2.1. 

Common name IUPAC name Function CAS number EC number Content (%)
Min Max
Iodine  Active substance 7553-56-2 231-442-4 0,55 0,55
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy Non active substance 68439-50-9  4,69 4,69
 2.2. 

Formulation AL - Any other liquid
 
 3. 

Hazard statements Causes serious eye irritation.Harmful to aquatic life with long lasting effects.
Precautionary statements Keep out of reach of children.Wash hands thoroughly after handling.Wear protective gloves.Wear protective clothing.Wear eye protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice/attention.
 4.  4.1. 

Product Type PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeasts
Field(s) of use IndoorDisinfection of teats of milk producing animals by dipping, foaming or spraying before milking
Application method(s) Dipping, foaming, spraying -Manual or automated disinfection of teats by dipping, foaming or spraying before milkingDipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine
Application rate(s) and frequency 
— cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended)
— sheep (1,5 to 5 ml: 1,5 to 3 ml recommended)
— goats (2,5 to 6 ml: 2,5 to 4 ml recommended)Frequency: 2 to 3 times per day
Category(ies) of users Professional
Pack sizes and packaging material HDPE JERRYCAN 5, 10, 22 LHDPE DRUM 60, 120, 220 LHDPE CONTAINER 1 000 L
 4.1.1. 
Fill the dipping/foaming cup/sprayer manually or automatically with the ready to use product.

Eliminate all visible dirt before applying the product.

Manual or automatic dipping/foaming/spraying on animal's teats on the full length of the teat before milking.

Let the product act at least one minute.

Use the teat cleaning and wiping method systematically before attaching the milking cluster.

See also general instructions for use of meta SPC5.
 4.1.2. 
For manual dipping/foaming application: Wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information)/eye protection.

For manual spraying applications wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information)/protective clothing/eye protection.

In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for post-milking disinfection.
 4.1.3. 
See general directions for use of meta SPC 5
 4.1.4. 
See general directions for use of meta SPC 5
 4.1.5. 
See general directions for use of meta SPC 5
 4.2. 

Product Type PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use —
Target organism(s) (including development stage) BacteriaYeastsAlgaeViruses
Field(s) of use IndoorDisinfection of teats of milk producing animals by dipping, foaming or spraying after milking
Application method(s) Dipping, foaming, spraying -Manual or automated disinfection of teats by dipping, foaming or spraying after milking.Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine.
Application rate(s) and frequency 
— cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended)
— sheep (1,5 to 5 ml: 1,5 to 3 ml recommended)
— goats (2,5 to 6 ml: 2,5 to 4 ml recommended)Frequency: 2 to 3 times per day
Category(ies) of users Professional
Pack sizes and packaging material HDPE JERRYCAN 5, 10, 22 LHDPE DRUM 60, 120, 220 LHDPE CONTAINER 1 000 L
 4.2.1. 
Fill the dipping/foaming cup/sprayer manually or automatically with the ready to use product.

Manual or automatic dipping/foaming/spraying on animal's teats on the full length of the teat after milking.

Leave the product until next milking. Keep the cows standing until the product has dried (at least 5 minutes).

At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster.

See also general instructions for use of meta SPC 5.
 4.2.2. 
For manual spraying applications wear protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information)/protective clothing/eye protection.

In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.
 4.2.3. 
See general directions for use of meta SPC 5
 4.2.4. 
See general directions for use of meta SPC 5
 4.2.5. 
See general directions for use of meta SPC 5
 5.  5.1. 
See use-specific instructions for each use.

Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

Where necessary repeat the application at each milking.

Clean the application equipment regularly with warm water.
 5.2. 
See use-specific risk mitigation measures for each use.
 5.3. 
Take the contaminated clothes and shoes off immediately. Wash them before wearing them again.

FIRST AID INSTRUCTIONS


— In the event of inhalation: Bring to fresh air.
— In the event of contact with the skin: Wash with water.
— In the event of contact with the eyes:
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
— In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice.

Refer to the safety data sheet available for professional user: it contains an emergency phone number.

Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use.
 5.4. 
At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste.
 5.5. 
Shelf life: 2 years in HDPE

Do not store at a temperature higher than 30 °C.
 6.  7.  7.1. 

Trade name(s) Liq-io 5500IODYPROINO JOD 50 LiquidUsual Iod Liquid +IODIUM PRO SPRAYIODEXIodoliquid +Iodospray PlusDESINTEAT PLUSROBOSPRAY IODEINOTRAYONIODYPRO 5500Robot Liq-io 55IODYPRO BL5500ADF iDip+ 5500HOEVE-JODIUM SPRAYGRUPAIODEIODOCANJOFOJODI PLUSK-AGRO PRODIP IDIODIPHELIO IODE SPRAYMAMMO-JODKRONI Jod Spray 5500MUNGI-IODLELY QUARESS-Iodine
Authorisation number EU-0018397-0007 1-5
Common name IUPAC name Function CAS number EC number Content (%)
Iodine  Active substance 7553-56-2 231-442-4 0,55
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio) Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy Non active substance 68439-50-9  4,69
