
Article 1 
The substances specified in the Annex, belonging to the additive category ‘nutritional additives’ and to the functional group ‘compounds of trace elements’, are authorised as feed additives in animal nutrition, subject to the conditions laid down in that Annex.
Article 2 
The authorised substances specified in the Annex as additives belonging to the additive category ‘nutritional additives’ and to the functional group ‘compounds of trace elements’ shall not be used in water for drinking.
Article 3 
In the Annex to Regulation (EC) No 1334/2003, the following additives are deleted from entry E4 for the element Copper-Cu: ‘cupric acetate, monohydrate, basic cupric carbonate, monohydrate, cupric chloride, dihydrate, cupric oxide, cupric sulphate, pentahydrate, copperlysine sulphate and cupric chelate of amino acids, hydrate’.
Article 4 
In the Annex to Regulation (EC) No 479/2006, the entry E4 for the additive ‘Cupric chelate of glycine hydrate’ is deleted.
Article 5 
In the Annex to Regulation (EU) No 349/2010, in the line 3b4.10 the text of the eighth column is replaced by the following:
'Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).Ovines: 15 (total).Caprines: 35 (total)Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total);
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).Crustaceans: 50 (total).Other animals: 25 (total)'.
Article 6 
In the Annex to Implementing Regulation (EU) No 269/2012, in the line 3b409 the text of the eighth column is replaced by the following:
'Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).Ovines: 15 (total).Caprines: 35 (total)Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total);
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).Crustaceans: 50 (total).Other animals: 25 (total)'.
Article 7 
In the Annex to Implementing Regulation (EU) No 1230/2014, in the line 3b411 the text of the eighth column is replaced by the following:
'Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).Ovines: 15 (total).Caprines: 35 (total)Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total);
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).Crustaceans: 50 (total).Other animals: 25 (total'.
Article 8 
In the Annex to Implementing Regulation (EU) 2016/2261, in the line 3b412 the text of the eighth column is replaced by the following:
'Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).Ovines: 15 (total).Caprines: 35 (total)Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total);
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).Crustaceans: 50 (total).Other animals: 25 (total'.
Article 9 

1. The substances ‘cupric acetate, monohydrate’, ‘basic cupric carbonate, monohydrate’, ‘cupric chloride, dihydrate’, ‘cupric oxide’, ‘cupric sulphate, pentahydrate’, ‘cupric chelate of amino acids, hydrate’ and ‘cupric chelate of glycine hydrate’ as authorised by Regulation (EC) No 1334/2003 and Regulation (EC) No 479/2006 and the copper compounds authorised by Regulation (EU) No 349/2010 and Implementing Regulations (EU) No 269/2012, (EU) No 1230/2014 and (EU) 2016/2261, and premixtures containing those substances, which are produced and labelled before 13 February 2019 in accordance with the rules applicable before 13 August 2018 may continue to be placed on the market and used until the existing stocks are exhausted.
2. Feed materials and compound feed containing the substances referred to in paragraph 1 which are produced and labelled before 13 August 2019 in accordance with the rules applicable before 13 August 2018 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.
3. Feed materials and compound feed containing the substances referred to in paragraph 1 which are produced and labelled before 13 August 2020 in accordance with the rules applicable before 13 August 2018 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.
Article 10 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 23 July 2018.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX

Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
Content of element (Cu) in mg/kg of complete feed with a moisture content of 12 %
Category of nutritional additives. Functional group: compounds of trace elements
3b401 — Copper(II) diacetate monohydrate 
Copper(II) diacetate monohydrate as a powder with a minimum content of 31 % copper

Chemical formula: Cu(CH3COO)2 · H2O

CAS Number: 6046-93-1

For the identification of Copper(II) diacetate monohydrate in the feed additive:


— European Pharmacopoeia Monographs 2146 and 20301

For the crystallographic characterisation of the feed additive:


— X-Ray diffraction

For the determination of total Cu content in the feed additive and premixtures:


— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)

Determination of total Cu content in feed materials and compound feed:


— atomic absorption spectrometry, AAS (Commission Regulation (EC) No 152/2009, Annex IV-C) or
— inductively coupled plasma atomic emission, ICP-AES (EN 15510 or CEN/TS 15621)
 All animal species — — Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).Ovines: 15 (total).Caprines: 35 (total)Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).Crustaceans: 50 (total).Other animals: 25 (total). 
1.. The additive shall be incorporated into feed in the form of a premixture.
2.. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
3.. The following words shall be included in the labelling:

— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
'The level of copper in this feed may cause poisoning in certain breeds of sheep.'
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
'The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.' 13 August 2028
3b402 — Copper(II) carbonate dihydroxy monohydrate 
Copper(II) carbonate dihydroxy monohydrate as a powder with a minimum content of 52 % copper

Chemical formula: CuCO3 · Cu(OH)2 · H2O

CAS Number: 100742-53-8

For the identification of carbonate in the feed additive:


— European Pharmacopoeia Monograph 20301

For the determination of total Cu in the feed additive and premixtures:


— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)

For the determination of total Cu in feed materials and compound feed:


— atomic absorption spectrometry, AAS (Regulation (EC) No 152/2009, Annex IV-C) or
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
 All animal species — — Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).Ovines: 15 (total).Caprines: 35 (total)Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).Crustaceans: 50 (total).Other animals: 25 (total). 
1.. The additive shall be incorporated into feed in the form of a premixture.
2.. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
3.. The following words shall be included in the labelling:

— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
'The level of copper in this feed may cause poisoning in certain breeds of sheep.'
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
'The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.' 13 August 2028
3b403 — Copper(II) chloride dihydrate 
Copper(II) chloride dihydrate as a powder with a minimum content of 36 % copper

Chemical formula: CuCl2 · 2H2O

CAS Number: 10125-13-0

For the identification of chloride in the feed additive:


— European Pharmacopoeia Monograph 20301

For the crystallographic characterisation of the feed additive:


— X-Ray diffraction

For the determination of total Cu in the feed additive and premixtures:


— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)

For the determination of total Cu in feed materials and compound feed:


— atomic absorption spectrometry, AAS (Regulation (EC) No 152/2009, Annex IV-C) or
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
 All animal species — — Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).Ovines: 15 (total).Caprines: 35 (total)Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).Crustaceans: 50 (total).Other animals: 25 (total). 
1.. The additive shall be incorporated into feed in the form of a premixture.
2.. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
3.. The following words shall be included in the labelling:

— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
'The level of copper in this feed may cause poisoning in certain breeds of sheep.'
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
'The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.' 13 August 2028
3b404 — Copper(II) oxide 
Copper(II) oxide as a powder with a minimum content of 77 % copper

Chemical formula: CuO

CAS Number: 1317-38-0

For the crystallographic characterisation of the feed additive:


— X-Ray diffraction

For the determination of total Cu in the feed additive and premixtures:


— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)

For the determination of total Cu in feed materials and compound feed:


— atomic absorption spectrometry, AAS (Regulation (EC) No 152/2009, Annex IV-C) or
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
 All animal species — — Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).Ovines: 15 (total).Caprines: 35 (total)Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).Crustaceans: 50 (total).Other animals: 25 (total). 
1.. The additive shall be incorporated into feed in the form of a premixture.
2.. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
3.. The following words shall be included in the labelling:

— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
'The level of copper in this feed may cause poisoning in certain breeds of sheep.'
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
'The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.' 13 August 2028
3b405 — Copper(II) sulphate pentahydrate 
Copper(II) sulphate pentahydrate as a powder with a minimum content of 24 % copper

Chemical formula: CuSO4 · 5H2O

CAS Number: 7758-99-8

For the identification of Copper(II) sulphate pentahydrate in the feed additive:


— European Pharmacopoeia Monographs 0894 and 20301

For the crystallographic characterisation of the feed additive:


— X-Ray diffraction

For the determination of total Cu in the feed additive and premixtures:


— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)

For the determination of total Cu in feed materials and compound feed:


— atomic absorption spectrometry, AAS (Regulation (EC) No 152/2009, Annex IV-C) or
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
 All animal species — — Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).Ovines: 15 (total).Caprines: 35 (total)Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).Crustaceans: 50 (total).Other animals: 25 (total). 
1.. Copper(II) sulphate pentahydrate may be placed on the market and used as an additive consisting of a preparation.
2.. The additive shall be incorporated into feed in the form of a premixture.
3.. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
4.. The following words shall be included in the labelling:

— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
'The level of copper in this feed may cause poisoning in certain breeds of sheep.'
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
'The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.' 13 August 2028
3b406 — Copper(II) chelate of amino acids hydrate 
Copper(II) amino acid complex where the copper and the amino acids derived from soya protein are chelated via coordinate covalent bonds, as a powder with a minimum content of 10 % copper

Chemical formula: Cu(x)1–3 · nH2O, x = anion of any amino acid from soya protein hydrolysate.

Maximum of 10 % of the molecules exceeding 1 500 Da

For the quantification of the amino acid content in the feed additive:


— ion exchange chromatography combined with post-column ninhydrin derivatisation and photometric detection (Regulation (EC) No 152/2009, Annex III-F)

For the determination of total Cu in the feed additive and premixtures:


— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)

For the determination of total Cu in feed materials and compound feed:


— atomic absorption spectrometry, AAS (Regulation (EC) No 152/2009, Annex IV-C) or
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
 All animal species  — Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).Ovines: 15 (total).Caprines: 35 (total)Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).Crustaceans: 50 (total).Other animals: 25 (total). 
1.. Copper(II) chelate of amino acids hydrate may be placed on the market and used as an additive consisting of a preparation.
2.. The additive shall be incorporated into feed in the form of a premixture.
3.. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
4.. The following words shall be included in the labelling:

— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
'The level of copper in this feed may cause poisoning in certain breeds of sheep.'
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
'The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.' 13 August 2028
3b407 — Copper(II) chelate of protein hydrolysates 
Copper(II) chelate of protein hydrolysates as a powder with a minimum content of 10 % copper and a minimum of 50 % copper chelated

Chemical formula: Cu(x)1–3 · nH2O, x = anion of any amino acid from soya protein hydrolysate

For the quantification of protein hydrolysates content in the feed additive:


— ion exchange chromatography combined with post-column ninhydrin derivatisation and photometric detection (Regulation (EC) No 152/2009, Annex III-F)

For the qualitative verification of the chelation of the copper in the feed additive:


— Fourier Transformed Infrared (FTIR) spectroscopy followed by multivariate regression methods

For the determination of total Cu in the feed additive and premixtures:


— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)

For the determination of total Cu in feed materials and compound feed:


— atomic absorption spectrometry, AAS (Regulation (EC) No 152/2009, Annex IV-C) or
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
 All animal species — — Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).Ovines: 15 (total).Caprines: 35 (total)Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).Crustaceans: 50 (total).Other animals: 25 (total). 
1.. The additive shall be incorporated into feed in the form of a premixture.
2.. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
3.. The following words shall be included in the labelling:

— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
'The level of copper in this feed may cause poisoning in certain breeds of sheep.'
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
'The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.' 13 August 2028
3b413 — Copper(II) chelate of glycine hydrate (solid) 
Copper(II) chelate of glycine, hydrate, as a powder with a minimum content of 15 % copper and a maximum of 13 % moisture

Chemical formula: Cu(x)1-3 · nH2O, x = anion of glycine

For the quantification of the glycine content in the feed additive:


— ion exchange chromatography combined with post-column ninhydrin derivatisation and photometric detection (Regulation (EC) No 152/2009, Annex III-F)

For the determination of total Cu in the feed additive and premixtures:


— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)

For the determination of total Cu in feed materials and compound feed:


— atomic absorption spectrometry, AAS (Regulation (EC) No 152/2009, Annex IV-C) or
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
 All animal species — — Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).Ovines: 15 (total).Caprines: 35 (total)Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).Crustaceans: 50 (total).Other animals: 25 (total). 
1.. The additive shall be incorporated into feed in the form of a premixture.
2.. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
3.. The following words shall be included in the labelling:

— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
'The level of copper in this feed may cause poisoning in certain breeds of sheep.'
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
'The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.' 13 August 2028
3b414 — Copper(II) chelate of glycine hydrate (liquid) 
Copper(II) chelate of glycine, hydrate, as a liquid with a minimum content of 6 % copper

Chemical formula: Cu(x)1-3 · nH2O, x = anion of glycine

For the quantification of the glycine content in the feed additive:


— ion exchange chromatography combined with post-column ninhydrin derivatisation and photometric detection (Regulation (EC) No 152/2009, Annex III-F)

For the determination of total Cu in the feed additive and premixtures:


— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)

For the determination of total Cu in feed materials and compound feed:


— atomic absorption spectrometry, AAS (Regulation (EC) No 152/2009, Annex IV-C) or
— inductively coupled plasma atomic emission spectrometry, ICP-AES (EN 15510 or CEN/TS 15621)
    Bovines:
— Bovines before the start of rumination: 15 (total);
— Other bovines: 30 (total).Ovines: 15 (total).Caprines: 35 (total)Piglets:
— suckling and weaned up to 4 weeks after weaning: 150 (total).
— from 5-th week after weaning up to 8 weeks after weaning: 100 (total).Crustaceans: 50 (total).Other animals: 25 (total). 
1.. Copper(II) chelate of glycine hydrate (liquid) may be placed on the market and used as an additive consisting of a preparation.
2.. The additive shall be incorporated into feed in the form of a premixture.
3.. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by inhalation, dermal contact or eyes contact, in particular due to the content of heavy metals including nickel. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.
4.. The following words shall be included in the labelling:

— For feed for ovines if the level of copper in the feed exceeds 10 mg/kg:
'The level of copper in this feed may cause poisoning in certain breeds of sheep.'
— For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
'The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.' 13 August 2028

