
Article 1 
The substances specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.
Article 2 

1. The substances as specified in the Annex and premixtures containing those substances, which are produced and labelled before 6 August 2017 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted.
2. Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2018 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.
3. Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2019 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.
Article 3 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 14 December 2016.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX

Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
mg of active substance/kg of complete feedingstuff with a moisture content of 12 %
(1) (2) (3) (4) (5) (6) (7) (8) (9)
Category: Sensory additives. Functional group: Flavouring compounds
2b01002 — 1-Isopropyl-4-methylbenzene 
1-Isopropyl-4-methylbenzene

1-Isopropyl-4-methylbenzene

Produced by chemical synthesis

Purity: min 97 %

C10H14

CAS No 99¬87-6

FLAVIS No: 01.002

For the determination of 1-isopropyl-4-methylbenzene in the feed additive and in feed flavouring premixtures:

Gas-chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be:
For cats: 14 mg/kg, and for other species and categories: 25 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 14 mg/kg for cats;
— 25 mg/kg for other species and categories.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:

— 14 mg/kg for cats;
— 25 mg/kg for other species and categories.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
2b01003 — Pin-2(10)-ene 
Pin-2(10)-ene

Pin-2(10)-ene

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C10H16

CAS No 127-91-3

FLAVIS No: 01.003

For the determination of pin-2(10)-ene in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
2b01004 — Pin-2(3)-ene 
Pin-2(3)-ene

Pin-2(3)-ene

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C10H16

CAS No 80-56-8

FLAVIS No: 01.004

For the determination of pin-2(3)-ene in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
2b01007 — beta-caryophyllene 
beta-caryophyllene

beta-caryophyllene

Produced by chemical synthesis

Purity: min. 80 %

Chemical formula: C15H24

CAS No 87-44-5

FLAVIS No: 01.007

For the determination of beta-caryophyllene in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
2b01009 — Camphene 
Camphene

Camphene

Produced by chemical synthesis

Purity: min. 80 %

Chemical formula: C10H16

CAS No 79-92-5

FLAVIS No: 01.009

For the determination of camphene in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
2b01010 — 1-Isopropenyl-4-methylbenzene 
1-Isopropenyl-4-methylbenzene

1-Isopropenyl-4-methylbenzene

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C10H12

CAS No 1195-32-0

FLAVIS No:01.010

For the determination of 1-Isopropenyl-4-methylbenzene in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be:
for pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 1 mg/kg for pigs and poultry;
— 1,5 mg/kg for other species and categories.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:

— 1 mg/kg for pigs and poultry;
— 1,5 mg/kg for other species and categories.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
2b01029 — delta-3-Carene 
delta-3-Carene

delta-3-Carene

Produced by chemical synthesis

Purity: min. 92 %

Chemical formula: C10H16

CAS No 13466-78-9

FLAVIS No:01.029

For the determination of delta-3-Carene in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
2b01045 — d-Limonene 
d-Limonene

d-Limonene

Produced by chemical synthesis

Purity: min. 96 %

Chemical formula: C10H16

CAS No 5989-27-5

FLAVIS No: 01.045

For the determination of d-limonene in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species except male rats — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 25 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 25 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
