
Article 1 
The substances specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.
Article 2 

1. The substances specified in the Annex and premixtures containing those substances, which are produced and labelled before 6 August 2017 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted.
2. Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2018 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.
3. Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2019 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.
Article 3 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 14 December 2016.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX

Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
mg of active substance/kg of complete feedingstuff with a moisture content of 12 %
(1) (2) (3) (4) (5) (6) (7) (8) (9)
Category: Sensory additives. Functional group: Flavouring compounds
2b02010 — Benzyl alcohol 
Benzyl alcohol

Benzyl alcohol

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C7H8O

CAS number 100-51-6

FLAVIS No 02.010

For the determination of benzyl alcohol in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 125 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 125 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 125 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b02039 — 4-Isopropylbenzyl alcohol 
4-Isopropylbenzyl alcohol

4-Isopropylbenzyl alcohol

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C10H14O

CAS number 536-60-7

FLAVIS No 02.039

For the determination of 4-isopropylbenzyl alcohol in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b05013 — Benzaldehyde 
Benzaldehyde

Benzaldehyde

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C7H6O

CAS number 100-52-7

FLAVIS No 05.013

For the determination of benzaldehyde in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 25 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 25 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b05017 — Veratraldehyde 
Veratraldehyde

Veratraldehyde

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C9H10O3

CAS number 120-14-9

FLAVIS No 05.017

For the identification of veratraldehyde in the feed additive and flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species except poultry and fish — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b05022 — 4-Isopropylbenzaldehyde 
4-Isopropylbenzaldehyde

4-Isopropylbenzaldehyde

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C10H12O

CAS number 122-03-2

FLAVIS No 05.022

For the determination of 4-isopropylbenzaldehyde in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — —  
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b05055 — Salicylaldehyde 
Salicylaldehyde

Salicylaldehyde

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C7H6O2

CAS number 90-02-8

FLAVIS No 05.055

For the identification of salicylaldehyde in the feed additive and flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 1 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 1 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b05029 — p-Tolualdehyde 
p-Tolualdehyde

p-Tolualdehyde

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C8H8O

CAS number 104-87-0

FLAVIS No 05.029

For the determination of p-tolualdehyde in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be:
5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b05129 — 2-Methoxybenzaldehyde 
2-Methoxybenzaldehyde

2-Methoxybenzaldehyde

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C8H8O2

CAS number 135-02-4

FLAVIS No 05.129

For the identification of 2-methoxybenzaldehyde in the feed additive and flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 1 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 1 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b08021 — Benzoic acid 
Benzoic acid

Benzenecarboxylic acid, phenylcarboxylic acid

Produced by chemical synthesis

Purity: min. 99 %

Chemical formula: C7H6O2

CAS number 65-85-0

FLAVIS No 08.021

Maximum level of impurities

Phthalic acid: ≤ 100 mg/kg;

Biphenyl: ≤ 100 mg/kg

For the determination of benzoic acid in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — 125 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. For users of the additive and premixtures in a feed business, operational procedures and appropriate organisational measures shall be established to address hazards by inhalation, dermal contact or eyes contact. Where the dermal, inhalatory or eyes exposure cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment. 6 February 2027
2b08080 — Gallic acid 
Gallic acid

Gallic acid

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C7H6O5

CAS number 149-91-7

FLAVIS No 08.080

For the identification of gallic acid in the feed additive and flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species except fish — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 25 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 25 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b09014 — Benzyl acetate 
Benzyl acetate

Benzyl acetate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C9H10O2

CAS number 140-11-4

FLAVIS No 09.014

For the determination of benzyl acetate in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 125 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 125 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 125 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b09051 — Benzyl butyrate 
Benzyl butyrate

Benzyl butyrate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C11H14O2

CAS number 103-37-7

FLAVIS No 09.051

For the determination of benzyl butyrate in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b09077 — Benzyl formate 
Benzyl formate

Benzyl formate

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C8H8O2

CAS number 104-57-4

FLAVIS No 09.077

For the determination of benzyl formate in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b09132 — Benzyl propionate 
Benzyl propionate

Benzyl propionate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C10H12O2

CAS number 122-63-4

FLAVIS No 09.132

For the determination of benzyl propionate in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 25 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 25 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b09316  Benzyl hexanoate 
Benzyl hexanoate

Benzyl hexanoate

Produced by chemical synthesis

Purity: min. 99 %

Chemical formula: C13H18O2

CAS number 6938-45-0

FLAVIS No 09.316

For the identification of benzyl hexanoate in the feed additive and flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be:
for pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 1 mg/kg for pigs and poultry;
— 1,5 mg/kg for other species and categories'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:

— 1 mg/kg for pigs and poultry;
— 1,5 mg/kg for other species and categories.'
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b09426 — Benzyl isobutyrate 
Benzyl isobutyrate

Benzyl isobutyrate

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C11H14O2

CAS number 103-28-6

FLAVIS No 09.426

For the determination of benzyl isobutyrate in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b09458 — Benzyl isovalerate 
Benzyl isovalerate

Benzyl isovalerate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C12H16O2

CAS number 103-38-8

FLAVIS No 09.458

For the determination of benzyl isovalerate in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b09581 — Hexyl salicylate 
Hexyl salicylate

Hexyl salicylate

Produced by chemical synthesis

Purity: min. 99 %

Chemical formula: C13H18O3

CAS number 6259-76-3

FLAVIS No 09.581

For the identification of hexyl salicylate in the feed additive and flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 1 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 1 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b09705 — Benzyl phenylacetate 
Benzyl phenylacetate

Benzyl phenylacetate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C15H14O2

CAS number 102-16-9

FLAVIS No 09.705

For the determination of benzyl phenylacetate in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b09725 — Methyl benzoate 
Methyl benzoate

Methyl benzoate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C8H8O2

CAS number 93-58-3

FLAVIS No 09.725

For the determination of methyl benzoate in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b09726 — Ethyl benzoate 
Ethyl benzoate

Ethyl benzoate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C9H10O2

CAS number 93-89-0

FLAVIS No 09.726

For the determination of ethyl benzoate in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — —  
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b09755 — Isopentyl benzoate 
Isopentyl benzoate

Isopentyl benzoate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C12H16O2

CAS number 94-46-2

FLAVIS No 09.755

For the determination of isopentyl benzoate in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b09762 — Pentyl salicylate 
Pentyl salicylate

Pentyl salicylate

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula C12H16O3

CAS number 2050-08-0

FLAVIS No 09.762

For the identification of pentyl salicylate in the feed additive and flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 1 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 1 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b09757 — Isobutyl benzoate 
Isobutyl benzoate

Isobutyl benzoate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C11H14O2

CAS number 120-50-3

FLAVIS No 09.757

For the determination of isobutyl benzoate in the feed additive and in feed flavouring premixtures.

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
