
Article 1 
The substances specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.
Article 2 

1. The substances specified in the Annex and premixtures containing those substances, which are produced and labelled before 6 August 2017 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted.
2. Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2018 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.
3. Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2019 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.
Article 3 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 14 December 2016.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX

Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
mg of active substance/kg of complete feedingstuff with a moisture content of 12 %
(1) (2) (3) (4) (5) (6) (7) (8) (9)
Category: Sensory additives. Functional group: Flavouring compounds
2b12001 — 3-(Methylthio)propionaldehyde 
3-(Methylthio) propionaldehyde

3-(Methylthio) propionaldehyde

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C4H8OS

CAS number 3268-49-3

FLAVIS No 12.001

For the determination of 3-(methylthio) propionaldehyde in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12002 — Methyl 3-(methylthio)propionate 
Methyl 3-(methylthio)propionate

Methyl 3-(methylthio)propionate

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C5H10O2S

CAS number 13532-18-8

FLAVIS No 12.002

For the determination of methyl 3-(methylthio)propionate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12004 — Allylthiol 
Allylthiol

Allylthiol

Produced by chemical synthesis

Purity: min. 75 % (min. 98 % allylthiol + allyl sulphide + allyl mercaptan)

Chemical formula: C3H6S

CAS number 870-23-5

FLAVIS No 12.004

For the determination of allylthiol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12006 — Dimethyl sulfide 
Dimethyl sulfide

Dimethyl sulfide

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C2H6S

CAS number 75-18-3

FLAVIS No 12.006

For the determination of dimethyl sulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12007 — Dibutyl sulfide 
Dibutyl sulfide

Dibutyl sulfide

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C8H18S

CAS number 544-40-1

FLAVIS No 12.007

For the determination of dibutyl sulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12008 — Diallyl disulfide 
Diallyl disulfide

Diallyl disulfide

Produced by chemical synthesis

Purity: min. 80 % (min. 98 % diallyl disulphide +allyl sulphide + allyl mercaptan)

Chemical formula: C6H10S2

CAS number 2179-57-9

FLAVIS No 12.008

For the determination of diallyl disulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12009 — Diallyl trisulfide 
Diallyl trisulfide

Diallyl trisulfide

Produced by chemical synthesis

Purity: min. 65 % (min.95 % allyl di-, tri- and tetra sulfides)

Chemical formula: C6H10S3

CAS number 2050-87-5

FLAVIS No 12.009

For the determination of diallyl trisulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12013 — Dimethyl trisulfide 
Dimethyl trisulfide

Dimethyl trisulfide

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C2H6S3

CAS number 3658-80-8

FLAVIS No 12.013

For the determination of dimethyl trisulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12014 — Dipropyl disulfide 
Dipropyl disulfide

Dipropyl disulfide

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C6H14S2

CAS number 629-19-6

FLAVIS No 12.014

For the determination of dipropyl disulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12025 — Allyl isothiocyanate 
Allyl isothiocyanate

Allyl isothiocyanate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C4H5NS

CAS number 57-06-7

FLAVIS No 12.025

For the identification of allyl isothiocyanate in the feed additive and flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — 0,05 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12026 — Dimethyl disulfide 
Dimethyl disulfide

Dimethyl disulfide

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C2H6S2

CAS number 624-92-0

FLAVIS No 12.026

For the determination of dimethyl disulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12027 — 2-Methylbenzene-1-thiol 
2-Methylbenzene-1-thiol

2-Methylbenzene-1-thiol

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C7H8S

CAS number 137-06-4

FLAVIS No 12.027

For the determination of 2-methylbenzene-1-thiol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12032 — S-Methyl butanethioate 
S-Methyl butanethioate

S-Methyl butanethioate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C5H10OS

CAS number 2432-51-1

FLAVIS No 12.032

For the determination of S-methyl butanethioate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12037 — Allyl methyl disulfide 
Allyl methyl disulfide

Allyl methyl disulfide

Produced by chemical synthesis

Purity: min. 90 %

Chemical formula: C4H8S2

CAS number 2179-58-0

FLAVIS No 12.037

For the determination of allyl methyl disulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12062 — 3-(Methylthio)propan-1-ol 
3-(Methylthio)propan-1-ol

3-(Methylthio)propan-1-ol

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C4H10OS

CAS number 505-10-2

FLAVIS No 12.062

For the determination of 3-(methylthio)propan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12063 — 3-(Methylthio)hexan-1-ol 
3-(Methylthio)hexan-1-ol

3-(Methylthio)hexan-1-ol

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C7H16OS

CAS number 51755-66-9

FLAVIS No 12.063

For the determination of 3-(methylthio)hexan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12071 — 1-Propane-1-thiol 
1-Propane-1-thiol

1-Propane-1-thiol

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C3H8S

CAS number 107-03-9

FLAVIS No 12.071

For the determination of 1-propane-1-thiol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12088 — Diallyl sulfide 
Diallyl sulfide

Diallyl sulfide

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C6H10S

CAS number 592-88-1

FLAVIS No 12.088

For the determination of diallyl sulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12118 — 2,4-Dithiapentane 
2,4-Dithiapentane

2,4-Dithiapentane

Produced by chemical synthesis

Purity: min. 99 %

Chemical formula: C3H8S2

CAS number 1618-26-4

FLAVIS No 12.118

For the determination of 2,4-dithiapentane in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12168 — 2-Methyl-2-(methyldithio) propanal 
2-Methyl-2-(methyldithio)propanal

2-Methyl-2-(methyldithio)propanal

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C5H10OS2

CAS number 67952-60-7

FLAVIS No 12.168

For the determination of 2-methyl-2-(methyldithio) propanal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12173 — 2-Methylpropane-1-thiol 
2-Methylpropane-1-thiol

2-Methylpropane-1-thiol

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C4H10S

CAS number 513-44-0

FLAVIS No 12.173

For the identification of 2-methylpropane-1-thiol in the feed additive and flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — 0,04 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12175 — Methylsulfinyl methane 
Methylsulfinylmethane

Methylsulfinylmethane

Produced by chemical synthesis

Purity: min. 99 %

Chemical formula: C2H6OS

CAS number 67-68-5

FLAVIS No 12.175

For the determination of methylsulfinylmethane in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b12197 — Propane-2-thiol 
Propane-2-thiol

Propane-2-thiol

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C3H8S

CAS number 75-33-2

FLAVIS No 12.197

For the determination of propane-2-thiol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b15025 — 3,5-Dimethyl-1,2,4-trithiolane 
3,5-Dimethyl-1,2,4-trithiolane

3,5-Dimethyl-1,2,4-trithiolane

Produced by chemical synthesis

Purity: min. 90 %

Secondary components: diethyl trisulphide, dimethylbenzylcarbinol, N,N-dimethyl-ethanethioamide, 4,6-dimethyl1,2,3,5-tetracyclohexane, 3-methyl-1,2,4-trithiolane, 2-methyl-4-propyl 1,3-oxathiane

Chemical formula: C4H8S3

CAS number 23654-92-4

FLAVIS No 15.025

For the determination of 3,5-dimethyl-1,2,4-trithiolane in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
2b16030 — 2-Methyl-4-propyl-1,3-oxathiane 
2-Methyl-4-propyl-1,3-oxathiane

2-Methyl-4-propyl-1,3-oxathiane

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C8H16OS

CAS number 67715-80-4

FLAVIS No 16.030

For the determination of 2-methyl-4-propyl-1,3-oxathiane in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg'.
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves. 6 February 2027
