
Article 1 
The substances specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.
Article 2 

1. The substances as specified in the Annex and premixtures containing those substances, which are produced and labelled before 6 August 2017 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted.
2. Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2018 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.
3. Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2019 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.
Article 3 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 14 December 2016.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX

Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
mg of active substance/kg of complete feedingstuff with a moisture content of 12 %
(1) (2) (3) (4) (5) (6) (7) (8) (9)
Category: Sensory additives. Functional group: Flavouring compounds
2b02022 — Octan-2-ol 
Octan-2-ol

Octan-2-ol

Produced by chemical synthesis

Purity: min 97 %

C8H18O

CAS No 123¬96-6

FLAVIS No:02.022

For the determination of octan-2-ol in the feed additive and in feed flavouring premixtures:

Gas-chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be:
for pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 1 mg/kg for pigs and poultry;
— 1,5 mg/kg for other species and categories.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:

— 1 mg/kg for pigs and poultry;
— 1,5 mg/kg for other species and categories.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
2b02079 — Isopropanol 
Isopropanol

Isopropanol

Produced by chemical synthesis

Purity: min. 99,7 %

Chemical formula: C3H8O

CAS No 67-63-0

FLAVIS No: 02.079

For the determination of isopropanol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be:
25 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 25 mg/kg.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
2b02088 — Pentan-2-ol 
Pentan-2-ol

Pentan-2-ol

Produced by chemical synthesis

Purity: min. 97,9 %

Chemical formula: C5H12O

CAS No 6032-29-7

FLAVIS No: 02.088

For the determination of pentan-2-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be:
for pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 1 mg/kg for pigs and poultry;
— 1,5 mg/kg for other species and categories.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:

— 1 mg/kg for pigs and poultry;
— 1,5 mg/kg for other species and categories.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
2b02098 — Octan-3-ol 
Octan-3-ol

Octan-3-ol

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C8H18O

CAS No 589-98-0

FLAVIS No:02.098

For the determination of octan-3-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be:
for pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 1 mg/kg for pigs and poultry;
— 1,5 mg/kg for other species and categories.'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:

— 1 mg/kg for pigs and poultry;
— 1,5 mg/kg for other species and categories.
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
2b07002 — Heptan-2-one 
Heptan-2-one

Heptan-2-one

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C7H14O

CAS No 110-43-0

FLAVIS No: 07.002

For the determination heptan-2-one in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be:
for piglets: 4 mg/kg, for chickens for fattening and laying hens: 3 mg/kg, for cats: 2 mg/kg and for other species and categories: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 4 mg/kg for piglets;
— 3 mg/kg for chickens for fattening and laying hens;
— 2 mg/kg for cats;
— 5 mg/kg for other species and categories'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:

— 4 mg/kg for piglets;
— 3 mg/kg for chickens for fattening and laying hens;
— 2 mg/kg for cats;
— 5 mg/kg for other species and categories
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
2b07054 — Pentan-2-one 
Pentan-2-one

Pentan-2-one

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C5H10O

CAS No 107-87-9

FLAVIS No: 07.054

For the determination of pentan-2-one in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be:
for piglets: 4 mg/kg, for chickens for fattening and laying hens: 3 mg/kg, for cats: 2 mg/kg and for other species and categories: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 4 mg/kg for piglets;
— 3 mg/kg for chickens for fattening and laying hens;
— 2 mg/kg for cats;
— 5 mg/kg for other species and categories'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:

— 4 mg/kg for piglets;
— 3 mg/kg for chickens for fattening and laying hens;
— 2 mg/kg for cats;
— 5 mg/kg for other species and categories
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
2b07099 — 6-Methyl- hepta- 3,5-dien- 2-one 
6-Methyl- hepta- 3,5-dien- 2-one

6-Methyl- hepta- 3,5-dien- 2-one

Produced by chemical synthesis

Purity: min. 96 %

Chemical formula: C8H12O

CAS No 1604-28-0

FLAVIS No: 07.099

For the determination of 6-methyl- hepta- 3,5-dien- 2-one in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be:
for pigs and poultry: 0,3 mg/kg, and for other species and categories: 0,5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 0,3 mg/kg for pigs and poultry;
— 0,5 mg/kg for other species and categories'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:

— 0,3 mg/kg for pigs and poultry;
— 0,5 mg/kg for other species and categories
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
2b07113 — Nonan- 3- one 
Nonan- 3- one

Nonan- 3- one

Produced by chemical synthesis

Purity: min. 95,9 %

Chemical formula: C9H18O

CAS No 925-78-0

FLAVIS No: 07.113

For the determination of nonan- 3- one in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be:
pigs and poultry: 0,3 mg/kg, for fish: 0,05 mg/kg and for other species and categories: 0,5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 0,3 mg/kg for pigs and poultry;
— 0,05 mg/kg for fish;
— 0,5 mg/kg for other species and categories'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:

— 0,3 mg/kg for pigs and poultry;
— 0,05 mg/kg for fish;
— 0,5 mg/kg for other species and categories
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
2b07150 — Decan- 2 -one 
Decan- 2 -one

Decan- 2 -one

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C10H20O

CAS No 693-54-9

FLAVIS No: 07.150

For the determination of decan- 2 -one in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be:
for pigs and poultry: 0,3 mg/kg, and for other species and categories: 0,5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
— 0,3 mg/kg for pigs and poultry;
— 0,5 mg/kg for other species and categories'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:

— 0,3 mg/kg for pigs and poultry;
— 0,5 mg/kg for other species and categories
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
2b09105 — Isopropyl tetradecanoate 
Isopropyl tetradecanoate

Isopropyl tetradecanoate

Produced by chemical synthesis

Purity: min. 99 %

Chemical formula: C17H34O2

CAS No 110-27-0

FLAVIS No 09.105

For the determination of isopropyl tetradecanoate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
 All animal species — — — 
1.. The additive shall be incorporated into the feed in the form of a premixture.
2.. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3.. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.
4.. On the label of the additive the following shall be indicated:
'Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg'
5.. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg
6.. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 6 February 2027
