
Article 1 
Annexes IV and V to Regulation (EC) No 850/2004 are amended in accordance with the Annex to this Regulation.
Article 2 
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
It shall apply from 30 September 2016.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 30 March 2016.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX

In the table of Annex IV to Regulation (EC) No 850/2004, the following row is added:

Substance CAS No EC No Concentration limit referred to in Article 7(4)(a)
‘Hexabromocyclododecane 25637-99-4,3194-55-6,134237-50-6,134237-51-7,134237-52-8 247-148-4221-695-9 1 000 mg/kg, subject to review by the Commission by 20.4.2019

In Annex V to Regulation (EC) No 850/2004, Part 2, the table is replaced by the following:

‘Wastes as classified in Commission Decision 2000/532/EC Maximum concentration limits of substances listed in Annex IV Operation
10 WASTES FROM THERMAL PROCESSES Alkanes C10-C13, chloro (short-chain chlorinated paraffins) (SCCPs): 10 000 mg/kg;Aldrin: 5 000 mg/kg;Chlordane: 5 000 mg/kg;Chlordecone: 5 000 mg/kg;DDT (1,1,1-trichloro-2,2-bis (4-chlorophenyl) ethane): 5 000 mg/kg;Dieldrin: 5 000 mg/kg;Endosulfan: 5 000 mg/kg;Endrin: 5 000 mg/kg;Heptachlor: 5 000 mg/kg;Hexabromobiphenyl: 5 000 mg/kg;Hexabromocyclododecane: 1 000 mg/kg;Hexachlorobenzene: 5 000 mg/kg;Hexachlorobutadiene: 1 000 mg/kg;Hexachlorocyclohexanes, including lindane: 5 000 mg/kg;Mirex: 5 000 mg/kg;Pentachlorobenzene: 5 000 mg/kg;Perfluorooctane sulfonic acid and its derivatives (PFOS) (C8F17SO2X) (X = OH, Metal salt (O-M+), halide, amide, and other derivatives including polymers): 50 mg/kg;Polychlorinated Biphenyls (PCB): 50 mg/kg;Polychlorinated dibenzo-p-dioxins and dibenzofurans: 5 mg/kg;Polychlorinated naphthalenes (*): 1 000 mg/kg;Sum of the concentrations of tetrabromodiphenyl ether C12H6Br4O), pentabromodiphenyl ether (C12H5Br5O), hexabromodiphenyl ether (C12H4Br6O)and heptabromodiphenyl ether (C12H3Br7O): 10 000 mg/kg;Toxaphene: 5 000 mg/kg. Permanent storage shall be allowed only when all the following conditions are met:
((1)) The storage takes place in one of the following locations:

— safe, deep, under-ground, hard rock formations,
— salt mines,
— a landfill site for hazardous waste, provided that the waste is solidified or partly stabilised where technically feasible as required for classification of the waste in subchapter 19 03 of Decision 2000/532/EC.
((2)) The provisions of Council Directive 1999/31/EC and Council Decision 2003/33/EC were respected.
((3)) It has been demonstrated that the selected operation is environmentally preferable.
10 01 Wastes from power stations and other combustion plants (except 19)
10 01 14 * Bottom ash, slag and boiler dust from co-incineration containing hazardous substances
10 01 16 * Fly ash from co-incineration containing hazardous substances
10 02 Wastes from the iron and steel industry
10 02 07 * Solid wastes from gas treatment containing hazardous substances
10 03 Wastes from aluminium thermal metallurgy
10 03 04 * Primary production slags
10 03 08 * Salt slags from secondary production
10 03 09 * Black drosses from secondary production
10 03 19 * Flue-gas dust containing hazardous substances
10 03 21 * Other particulates and dust (including ball-mill dust) containing hazardous substances
10 03 29 * Wastes from treatment of salt slags and black drosses containing hazardous substances
10 04 Wastes from lead thermal metallurgy
10 04 01 * Slags from primary and secondary production
10 04 02 * Dross and skimmings from primary and secondary production
10 04 04 * Flue-gas dust
10 04 05 * Other particulates and dust
10 04 06 * Solid wastes from gas treatment
10 05 Wastes from zinc thermal metallurgy
10 05 03 * Flue-gas dust
10 05 05 * Solid waste from gas treatment
10 06 Wastes from copper thermal metallurgy
10 06 03 * Flue-gas dust
10 06 06 * Solid wastes from gas treatment
10 08 Wastes from other non-ferrous thermal metallurgy
10 08 08 * Salt slag from primary and secondary production
10 08 15 * Flue-gas dust containing hazardous substances
10 09 Wastes from casting of ferrous pieces
10 09 09 * Flue-gas dust containing hazardous substances
16 WASTES NOT OTHERWISE SPECIFIED IN THE LIST
16 11 Waste linings and refractories
16 11 01 * Carbon-based linings and refractories from metallurgical processes containing hazardous substances
16 11 03 * Other linings and refractories from metallurgical processes containing hazardous substances
17 CONSTRUCTION AND DEMOLITION WASTES (INCLUDING EXCAVATED SOIL FROM CONTAMINATED SITES)
17 01 Concrete, bricks, tiles and ceramics
17 01 06 * Mixtures of, or separate fractions of concrete, bricks, tiles and ceramics containing hazardous substances
17 05 Soil (including excavated soil from contaminated sites), stones and dredging spoil
17 05 03 * Soil and stones containing hazardous substances
17 09 Other construction and demolition wastes
17 09 02 * Construction and demolition wastes containing PCB, excluding PCB containing equipment
17 09 03 * Other construction and demolition wastes (including mixed wastes) containing hazardous substances
19 WASTES FROM WASTE MANAGEMENT FACILITIES, OFF-SITE WASTE WATER TREATMENT PLANTS AND THE PREPARATION OF WATER INTENDED FOR HUMAN CONSUMPTION AND WATER FROM INDUSTRIAL USE
19 01 Wastes from incineration or pyrolysis of waste
19 01 07 * Solid wastes from gas treatment
19 01 11 * Bottom ash and slag containing hazardous substances
19 01 13 * Fly ash containing hazardous substances
19 01 15 * Boiler dust containing hazardous substances
19 04 Vitrified waste and waste from vitrification
19 04 02 * Fly ash and other flue-gas treatment wastes
19 04 03 * Non-vitrified solid phase





The maximum concentration limit of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD and PCDF) shall be calculated according to the following toxic equivalency factors (TEFs):
PCDD TEF
2,3,7,8-TeCDD 1
1,2,3,7,8-PeCDD 1
1,2,3,4,7,8-HxCDD 0,1
1,2,3,6,7,8-HxCDD 0,1
1,2,3,7,8,9-HxCDD 0,1
1,2,3,4,6,7,8-HpCDD 0,01
OCDD 0,0003
PCDF TEF
2,3,7,8-TeCDF 0,1
1,2,3,7,8-PeCDF 0,03
2,3,4,7,8-PeCDF 0,3
1,2,3,4,7,8-HxCDF 0,1
1,2,3,6,7,8-HxCDF 0,1
1,2,3,7,8,9-HxCDF 0,1
2,3,4,6,7,8-HxCDF 0,1
1,2,3,4,6,7,8-HpCDF 0,01
1,2,3,4,7,8,9-HpCDF 0,01
OCDF 0,0003’
