
1 

(1) This Order may be cited as the Scottish Landfill Tax (Qualifying Material) Order 2015 and comes into force on 1st April 2015.
(2) This Order has effect in relation to taxable disposals made, or treated as made, on or after 1st April 2015.
2 

(1) Subject to paragraphs (3) and (4), the material listed in column 2 of the Schedule is qualifying material for the purposes of section 13(4) of the Landfill Tax (Scotland) Act 2014.
(2) The Schedule is to be construed in accordance with the notes contained in it.
(3) The material listed in column 2 of the Schedule must not be treated as qualifying material unless any condition set out alongside the description of the material in column 3 of the Schedule is met.
(4) Where the owner of the material immediately prior to the disposal and any operator of the landfill site at which the disposal is made are not the same person, material must not be treated as qualifying material unless it meets the relevant condition referred to in paragraph (5).
(5) The relevant condition is that a transfer note includes in relation to each type of material of which the disposal consists a description of the material which—
(a) accords with its description in column 2 of the Schedule;
(b) accords with a description listed in a note to the schedule (other than by way of exclusion); or
(c) is some other accurate description.
(6) In paragraph (5), “transfer note” means a transfer note within the meaning of regulation 3 of the Environmental Protection (Duty of Care) (Scotland) Regulations 2014.
JOHN SWINNEY
A member of the Scottish Government
St Andrew’s House,
Edinburgh
3rd February 2015
SCHEDULE
Article 2


Column 1Group Column 2Description of material Column 3Conditions
1 Rocks and soils Naturally occurring
2 Ceramic or concrete materials 
3 Minerals Processed or prepared
4 Furnace slags 
5 Ash 
6 Low activity inorganic compounds 
7 Calcium sulphate Disposed of in a landfill cell where no biodegradable waste is accepted
8 Calcium hydroxide and brine Deposited in a brine cavityNotes
(1) Group 1 comprises only—
(a) rock;
(b) clay;
(c) sand;
(d) gravel;
(e) sandstone;
(f) limestone;
(g) crushed stone;
(h) china clay;
(i) construction stone;
(j) stone from the demolition of buildings or structures;
(k) slate;
(l) sub-soil;
(m) silt; and
(n) dredgings.
(2) Group 2—
(a) comprises only—
(i) glass, including fritted enamel;
(ii) ceramics, including bricks, bricks and mortar, tiles, clay ware, pottery, china and refractories; and
(iii) concrete, including reinforced concrete, concrete blocks, breeze blocks and aircrete blocks; and
(b) does not include—
(i) glass fibre and glass-reinforced plastic; or
(ii) concrete plant washings.
(3) Group 3—
(a) comprises only—
(i) moulding sands, including used foundry sand;
(ii) clays, including moulding clays and clay absorbents (including Fuller’s earth and bentonite);
(iii) mineral absorbents;
(iv) man-made mineral fibres, including glass fibres;
(v) silica;
(vi) mica; and
(vii) mineral abrasives; and
(b) does not include—
(i) moulding sands containing organic binders; or
(ii) man-made mineral fibres made from glass-reinforced plastic and asbestos.
(4) Group 4 comprises only—
(a) vitrified wastes and residues from thermal processing of minerals where, in either case, the residue is both fused and insoluble; and
(b) slag from waste incineration.
(5) Group 5—
(a) comprises only—
(i) bottom ash and fly ash from wood or waste combustion: and
(ii) bottom ash and fly ash from coal or petroleum coke combustion (including when burnt together with biomass); and
(b) does not include fly ash from sewage sludge, municipal, clinical and hazardous waste incinerators.
(6) Group 6 comprises only—
(a) calcium based reaction wastes from titanium dioxide production;
(b) calcium carbonate;
(c) magnesium carbonate;
(d) magnesium oxide;
(e) magnesium hydroxide;
(f) iron oxide;
(g) ferric hydroxide;
(h) aluminium oxide;
(i) aluminium hydroxide;
(j) zirconium dioxide.
(7) Group 7 includes calcium sulphate, gypsum and calcium sulphate based plasters but does not include plasterboard.
